Database Info

Unable to SMS/Text after Undergoround WM6

I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G

noone seen this? can someone point me in the right direction?

anyone anyone, Bueller.....bueller.....

Did you setup your GPRS connections and all? These don't come setup with Underground and MBE. There is info in the various WM6 threads on setting this up (and even some cabs floating around for some of the providers). I have Cingular and I just went to their website and found info to do this.

GuardianZX9 said:
I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G
Click to expand...
Click to collapse
I have the same problem. There is a workaround though - if you tap and hold the 'To' field in the message, there is a 'Send' option. That one works for me.
Andrew

just flash Radio 2.19.11

i use T-mobile. i use regular T-Mobile GPRS for internet and i also made a new internet connection call T-Mobile MMS
setting similiar below
T-Mobile MMS Settings:
Setting up the data account
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile MMS.
Enter PictureMessaging in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Setting up the MMS profile
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter PictureMessaging in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile MMS from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to PictureMessaging and tap Set As Default.
Tap OK.
Click to expand...
Click to collapse
http://www.pocketpcaddict.com/forum...obile-mda-windows-mobile-5-phone-edition.html
and try switch around 216.155.165.050 to 216.155.165.50

Text messages
For SMS issues, try setting the Voice mail and Text message setting manually (Phone/Menu/Options/Services).Normally the network default settings work, but at times you may have to input the message center no. manually. Just call and ask your service provider for the message center number.
Radio ROM can be an issue at some locations- Try using 2.19.11 as suggested by J.

I have the same issue, I can send text fine, I can receive MMS, but I cant send MMS,
I have the settings just as posted above, and it doesn't work,

WM6 proxy setting, quick help.

Hello.
I'm using faria's latest WM6 ROM, but can't find where to enter proxy server / proxy settings in accordance to t-mobile's guide. WM6 doesnt have the place where to enter proxy numbers as specified. After a little digging i heard you might need to change the settings in the registry for wm6.
Can anyone please advise?
Thanks!
12. Tap Edit my proxy server under T-Mobile GPRS.
13. Tap to check This network connects to the Internet.
14. Tap to check This network uses a proxy server to connect to the Internet.
15. Enter 216.155.165.050 in the Proxy server field.
16. Tap Advanced.
17. Tap HTTP.
18. Enter 8080 in the Port field.
Click to expand...
Click to collapse

I was able to configure mine just fine today, but I'll admit it took me a few tries in the past before I figured it out.
Go to Start --> Settings --> Connections tab --> Connections.
Since you're not using the standard T-Mobile ROM, just adapt the steps a bit to match up with what is on the WM6 ROM. Where it says T-Mobile GRPS in the instructions, actually use the My Work Network section on the device. You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Add a new VPN server connection
Edit my proxy server
Other than the My Work Network/T-Mobile GPRS thing, the steps were exactly the same.
Oh yeah, instead of 216.165.155.050 enter 216.165.155.50.
I did that and I was able to get an Edge connection and send/receive MMS messages from my Verizon phone.
Dave

sgtcasey said:
You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Click to expand...
Click to collapse
Hi.
When I goto Settings > Connection; "My Work" is no longer listed as a connection, only My Home.
How can i get back / add "My Work" ?
THanks.

Hmmm... I'm not sure. I have My ISP and My Work Network and I've always had that with the WM6 ROM's.
Dave

I know this is kind of buggy... I had the same issue.
If you add a new connection, call it My Work or something, and choose GPRS 3G for the type, and finish, it will put 2 connections, which will allow you to change between My Work Network again, etc. No registry hack needed, it's there, it's just not showing. By adding a 2nd connection, it will show your "My Work Network" again. Keep in mind, if you had MMS messaging, but no 'net until now, once the 'net works, you will have to change your MMS setting to "My Work Network" as well.
Now 'net and MMS works on my phone (Cingular 8525) on Tmobile, using only T-Zones and WM6 Thx for the help!

arrrg.....mms cannot be had.

First off let me say ive searched this site high and low and tried almost every .cab ive found and followed plenty of setup instructions but still for the life of me cannot get MMS to work. email i get no problems sending texts i get no problems. but no MMS , and i think ive tried everything on this site.... im running Farias WM6 rom , and love it.
I had MMS working on the phone before i had to reflash beacuse i updated a radio rom and it almost bricked it.... so i followed all the instructions again just like usual and reflashed the downgrade rom and then upgraded to farias. I just dont remember what it was i did to get MMS working before
If someone could help me out it would be much appreciated.....
Maybe we could start a sticky entitled " How to get your MMS back after flashing "
Thanks in advance guys.

You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?

kegobeer said:
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
Click to expand...
Click to collapse
Yea , no MMS at all......
cant recieve or send.....
I had it working on the Faria rom before i had to reflash.....
all i keep getting is " error syncronizing " everytime i try to hit " send/recieve"

I had the same issue, go under the MMS settings, then goto server, select Cingular MMS or whoever your carrier is, mine wascingular, and then set it to the default and delete the one named default
If there is not other one besides deafault, then you need to ask your provider for your settings and add it.
hope this helps

This might be helpful to others , but i tried it still no worky for me.
stolen from " Jon " on howard forums
Ah! This sorta illustrates the problem. I had mentioned that I couldn't seem to send MMS, although I *could* browse the web via GPRS.
Well...I spent some time on the phone with T-Mobile "PDA Support" and finally have this figured out! There's been talk here about using the two different APN's available to T-Mobile Internet customers for WAP and MMS versus regular website browsing.
When I spoke with T-Mobile PDA Support, I was told a few things:
1) they've had some network problems that aren't 100% resolved that could be messing up our ability to browse the net, consistently get EDGE speeds, or send MMS messages.
2) MMS is supposed to be sent over their WAP gateway, so for this, you should use "wap.voicestream.com" as your APN.
3) Web browsing for full HTML web pages is supposed to be done over their non-protocol-restricted internet gateway, so for this, you should specify "internet2.voicestream.com" as the APN.
I did some experimenting, and it seems that I cannot send MMS when I connect via "internet2.voicestream.com", and I cannot browse the web when I connect via "wap.voicestream.com". But, as the gentleman from T-Mobile PDA Support suggested, when I chose the APN appropriate to the task, I succeeded. I tried this several times with consistent results.
I think I saw some discussion here about manually selecting the GPRS connection each time so you get the right gateway. But with a bit of configuration work up front, you can make this work automatically. Here's how:
The essence of the solution is that you should have TWO different connection setting groups - one for Internet Browsing and email, and one for MMS. Then, you can have the first one automatically invoked when your application tries to connect to the Internet, and you can have the MMS application automatically select the second connection group when it's trying to send an MMS message.
So -- Most, if not all, of you have a connection group named "T-Mobile GPRS". To examine it, click on:
Start / Settings / Connections and then tap the Connections icon. With the Tasks tab selected, you should see two connection groups listed, along with three choices under each one for tasks you can perform.
Under the connection group named "T-Mobile GPRS", click "Manage existing connections" -- you should be on the "Modem" tab -- if not, select it now.
This page shows a table in which you can list various network connections that this connection group can use to send and receive data. Since it seems that the three APNs that we know about are special purpose (one for WAP/MMS, one for Internet, one for VPN), it does NOT make sense to mix them here and let WM5 try to figure out which is best to use -- you will wind up with inconsistent results (i.e., works sometimes, but not others, seemingly at random).
Instead, since this "T-Mobile GPRS" connection group is for Internet browsing, the one and only connection you want to specify here is one that will use the "internet2" APN.
But first, click on the "Proxy Settings" tab below, and just click the box labeled, "This network connects to the Internet", and make sure the other boxes on the pages are blank (no proxy server specified here!). When you're done, select the "Modem" tab again (you might have to minimize the keyboard display at the bottom to see the tabs).
If you don't have a data connection yet that uses the internet2 APN, you can click on "New", then give it a descriptive name (such as "Internet connection"), select "Cellular Line (GPRS)" as the modem, click "Next", and input "internet2.voicestream.com" as the APN, click "Next" again, leave the user name, password and domain all blank and click "finish".
Click "ok" at the top a couple of times and you should be done with the connection group that gets you to the Internet.
Now - we'll create a separate connection group for MMS:
Go back into "Start / Settings / Connections" and tap the "Connections" icon again. You're back at the "Connections" screen that lists your two most recently defined "connection groups" -- the top one should be "T-Mobile GPRS" since we just worked on it. Click on "Add a new modem connection". Even though this line appears under "T-Mobile GPRS", you'll actually be creating a new and separate connection group.
You'll see a screen entitled, "Make a New Connection". Give it a meaningful name -- I chose "WAP connection". Select "Cellular Line (GPRS)" as the modem, and click "Next". This time, under Access Point Name, specify "wap.voicestream.com". Click next and make sure on the "My Connection" screen that user, password and domain are blank, then click "Finish".
You will now have separate connection groups for Internet Access and for MMS tranmission.
The next step is what makes this work automatically. Close all the windows until you're at the "today" screen again. Click "Start" and then "Messaging". If you don't see "MMS" at the top left of the screen, click the "Menu" button at the lower right, click on "Switch Accounts" and select "MMS".
Click "Menu" again, and then click "MMS Configuration...". You'll see three tabs: "Preferences", "Servers" and "About".
The preferences tab has non-critical choices that you should set to meet your own needs.
On the Servers tab, you should see a single server listed, "T-Mobile MMS" -- this was installed by one of the T-Mobile customizations when you first booted up your MDA. Click on this , and you'll see a screen that details the configurat ion of this server. Here's what you want in the config:
Server Name: non-critical, T-Mobile named it, "T-Mobile MMS", so you should probably leave it at that.
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://215.155.174.84/servlets/mms
...and HERE is where we tell it to automatically switch to our network connection that was set up for MMS:
Where it says, "Connect via:", the default that T-Mobile put in was your old "T-Mobile GPRS" connection. Instead, I clicked the drop-down arrow and selected the new connection that we created way up above that references the "wap.voicestream.com" APN, called something like "MMS Connection".
Sending size limitation as locked at 292k. WAP Version defaults to 2.0, but you can drop it down to 1.2 if you have some reason to do this (I don't).
Once this is all set right, click "OK", and "ok" your way back out of the messaging application.
Now you're ready for a test:
There are many way to initiate an MMS. However you do it, when it starts up, you should see it connecting to GPRS via your "MMS Connection", it will then send your MMS and disconnect from GPRS again after a bit.
Open up PIE again and select a website, and this time you'll see GPRS connecting via your first connection group -- the one that uses "internet2.voicestream.com" as the APN.
You can go back and forth several times -- this setup will select the correct network connection group each time, and work.
The ONLY issue I've seen with this is the following:
If your GPRS connection for one type of activity is still connected when you try launching the other service, it doesn't seem smart enough to force the old connection to disconnect first. So...if your old connection hasn't time out yet, you may have to click on the "G" icon (top of your today screen) and select "disconnect" before starting your other activity. But that's it -- aside from this, all the APN switching is automatic -- and works perfectly.
Click to expand...
Click to collapse

ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent

Data Cab
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace

sYnOnYx said:
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Click to expand...
Click to collapse
sounds like what ever your server settings are, your gateway setting is wrong.

gdribot said:
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
Click to expand...
Click to collapse
Ive tried it 2x already and no worky.......
and now im back to " error syncronizing "
*siigh*

Now its connecting up again , and it connects to (edge) Tmo MMS
but it gets to 66% sent on the status and i get
" next hop connection failed "
Someone just texed me and said " nice pic " so i guess it worked ??
not holding my breath just yet, but praying !

*sigh* *arrrrrrrrrrrrrrrrrrrrrrrgggggg*
now its just connects and disconnects.........
Here are my settings tell me if something is wrong :
Under my MMS configuration ( found from the messaging menu )
Servers :
Sever name : T-mobile MMS
Gateway : 216.155.165.50
Port number : 8080
Sever Address : Http://215.155.174.84/servlets/mms
Connect VIA : T-mobile MMS
And
Settings > Connections > connections Icon
Tmobile MMS then under " manage existing connections "
Name : T-mobile MMS
Select a modem : Cellular line (GPRS)
Access Point name : wap.voicestream.com
Username : blank ( ive tried imputting tmobile in there and nothing still )
password: blank ( ive tried imputting tmobile in there and nothing still )
domain : blank
In the advanced tab under TCP/IP :" use server IP address is selected " and
nothing else is.
under servers on the advanced tab " use server-assigned addresses " is only selected.
any clues ?

back to the "Gateway+timeout" error.... sigh...

i dont know what the hell i did , but its sending messages now.........
still havent recieved one tho.
i think im gonna have to do a writeup tho.

Do you use wifi? When wifi is on my MMS doesn't work.

Did you ever figure out what was happening. I'm having a similar problem. As far as I can tell all the setting you listed above are correct, and I have mine set the same. When I try to send a message it hangs at 87% and never completes. Once it ran up to 99% then I got the "Gateway Timeout" error.

What version of the ARCSoft MMS client are you using?
I cannot get it to send or connect at all unless I use one of the CABs for the settings floating around - then it works, but that causes other NASTY side effects on WM6.

Just the one that came with the rom that I loaded, [02/Nov/2007] TNT.1933, ArcSoft 4.2.8.1 with plug-in and full features. The settings seem to connect, the message just won't complete sending.

I'm not able to get it to connect unless I use the T-Mobile CAB (manually configuring does NOT work) and that breaks data connections when on sync.

treo 750 mms/wap?

hallo i am from greece!!! i dont know how to activate mms/wap i dont understand i have q if you know somethink tell me please!!! i have Q card its is the same company with wind
Sorry about my english!!!

here is a guide to my server .
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.

libal said:
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.
Click to expand...
Click to collapse
thank you!!!!! you are the best

it doesn't work!!! i dont know why

ATT MMS
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?

there is option to install palm sms software
shaunehannen said:
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?
Click to expand...
Click to collapse
http://rapidshare.com/files/99335294/threadedsms.rar
or
http://www.megaupload.com/?d=H63TXUP4

recieving picture messages

My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub

I think that it is the setting
se here : maybe there is a deference between the numbers and your server. ask your server for the correct numbers.
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: wap.voicestream.com
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 216.155.165.050
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 216.155.165.050:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +12063130004
12. Email center number is 500
13. MMS gateway address is 216.155.165.050:8080
14. MMS URL is http://216.155.174.84/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.

I have the same problem!!
dub08 said:
My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub
Click to expand...
Click to collapse
I was wondering did that solution that was given work for your phone cause it didn't for me. If it didn't work have your found out how to resolve the issue cause i haven't fixed mine yet.
thanks