Database Info

Please help! Urgent!

My Sensation is messed up. Only ROMs with the ville c2 1.11 base boot up, and then it tells me "Unfortunately, the process com.android.phone has stopped.", so I don't have data. Anything with the 3.x or 1.x base for the sensation doesn't work. I need my phone to work.

Do you superwipe between ROMs?

Yes, and even stock roms, flashed from the bootloader don't work.

Hitorijanae said:
Yes, and even stock roms, flashed from the bootloader don't work.
Click to expand...
Click to collapse
From 4ext (if you have it) wipe all but SD - sometimes superwipe isn't enough.
Plus ensure your Radio/firmware are OK?

mrew42 said:
From 4ext (if you have it) wipe all but SD - sometimes superwipe isn't enough.
Plus ensure your Radio/firmware are OK?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.23.3504.07_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.531.14
(bootloader) serialno: SH18ET500850
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3809mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.483s
That's my fastboot getvar all.

All looks good, so try the 4ext format and then install your ROM again.

mrew42 said:
All looks good, so try the 4ext format and then install your ROM again.
Click to expand...
Click to collapse
Just formatted using 4EXT, and flashed ARHD 6.7.0. Still not booting past the beats audio logo.

op can you edit your previous post ..where you did a "fastboot getvar all" output ...can you mask the imei
can you try reflashing the 3.33 universal firmware ..verify the md5 of it too..and check again
EDIT: get the firmware from this thread

ganeshp said:
op can you edit your previous post ..where you did a "fastboot getvar all" output ...can you mask the imei
can you try reflashing the 3.33 universal firmware ..verify the md5 of it too..and check again
EDIT: get the firmware from this thread
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: SH18ET500850
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3790mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
---------------------------------------------------------------------------------
New fastboot getvar all

I would even go back to GB if that would fix it, but I flashed the 1.50 ruu and I was stuck on the splash screen.

after flashing the new firmware ..did you try to boot up ?
and still you got stuck at boot screen ?
as you are SOFF ..try the ICS RUU latest Europe 3.33 one

Yes, I am s off, and I'll try tomorrow morning. At least Cyanogenmod still works perfectly.
Sent from my HTC Sensation using xda app-developers app

Will the Europe RUU work on my tmous Sensation?
Sent from my HTC Sensation using xda app-developers app

Hitorijanae said:
Will the Europe RUU work on my tmous Sensation?
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
yes ..you are supercid ..so any RUU will work ..afaik

ganeshp said:
yes ..you are supercid ..so any RUU will work ..afaik
Click to expand...
Click to collapse
K I'll try.

ganeshp said:
yes ..you are supercid ..so any RUU will work ..afaik
Click to expand...
Click to collapse
I was able to get gingerbread original RUU working, with logcats and adb access. Where should I go with this?
The RUU didn't work.

Hitorijanae said:
I was able to get gingerbread original RUU working, with logcats and adb access. Where should I go with this?
The RUU didn't work.
Click to expand...
Click to collapse
what do you mean by RUU didnt work ?
can you tell me the error

ganeshp said:
what do you mean by RUU didnt work ?
can you tell me the error
Click to expand...
Click to collapse
I should've clarified better, the phone got to the bootanimation and stopped.

Hitorijanae said:
I should've clarified better, the phone got to the bootanimation and stopped.
Click to expand...
Click to collapse
hmm try the TMOUS RUU then
TMOUS GB RUU
TMOUS ICS RUU

Okay, it's downloading.

Error[140] Bootloader version

Good day all you clever people, please dispatch any advice you may have as I am literally pulling my hair out of my head. Much thanks in advance.
[Problem]
I have an HTC Desire S and I would like to install the stock ROM on it as I want to return it to HTC for repairs.
[Question}
Which is the correct RUU to download and install?
Are there any changes that I have to make in order to install the RUU and avoid error[140]
I am in South Africa if this plays a role.
I successfully installed Cyanogen Mod (cm-7.2.0-saga.zip) using HTCdev, Superuser and ClockWorkMod Recovery using the tutorial below:
hypertexttransferprotocol://androidforums.com/desire-s-all-things-root/606770-guide-root-desire-s-hboot-2-0-s.html
[What I have already tried]
I read multiple guides from the forums about restoring the phone to the stock ROM.
I relocked the HBOOT using "fastboot oem lock"
I downloaded and attempted to install two different RUUs but keep getting Error[140]
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865.exe
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
[Phone Information]
C:\android-sdk\platform-tools>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 3971mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
SAGA PVT S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMc-boot
Aug 22 2011, 15:22:13

hello mate, every RRU i have tried to flash has game me some sort of error on every one, last one that failed on me, i had to remove the battery then put the phone into fast boot manually, then the RRU flashed straight away.
Was your phone branded to a network carrier when you first got it?

Thanks for your reply. My phone is not branded, or at least that I know of.
What steps did you follow to put the phone into fast boot manually without a battery?
Sent from my HTC Desire S using xda app-developers app

your cidnum: HTC__016 so your phone was VODA-Africa-South if i'm not wrong

Yes, that is correct. I was unaware that the phone was branded. There was absolutely no carrier branding on the hardware or software. Any idea where I can get the voda_southafrica RUU? Thanks.
Sent from my HTC Desire S using xda app-developers app

you can use newest official ICS to update, as it is a WWE edition, can be used with any Desire S

Thanks for the tip. I installed ICS successfully today and it is running perfectly.
Sent from my HTC Desire S using xda app-developers app

You will need to a GoldCard if you want to RUU to a different region, if you dont have it, you can only RUU to the correct region based on your current.
You will need to change your misc_version if you want to upgrade or downgrade your OS version. If you dont have it. You can only RUU from the current version you currently have to a higher, correct region.
Sent from my HTC Desire S using xda app-developers app

Thank you for the information. I will keep it in mind if I have to downgrade in the future.
Sent from my HTC Desire S using xda app-developers app

Please use the thanks button
Sent from my HTC Desire S using xda app-developers app

RUU needed for O2 UK Please.

Hi,
Had a look around and some reason cant find the answer (sure to be told I didnt look hard enough)
Im looking for a stock RUU which match these details
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3865mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Been using custom roms for a while, but looking to go back to stock and start again if need be. Also cant seem to SuperCID this phone, any help on that would be great too.
Thanks

stoneblade said:
Hi,
Had a look around and some reason cant find the answer (sure to be told I didnt look hard enough)
Im looking for a stock RUU which match these details
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3865mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Been using custom roms for a while, but looking to go back to stock and start again if need be. Also cant seem to SuperCID this phone, any help on that would be great too.
Thanks
Click to expand...
Click to collapse
no love?

Change your CID to another, which has RUU
Sent from my HTC One S using XDA Premium 4 mobile app

Have already tried, everytime I change it (following guide on here) it reverts back to original cid
Sent from my HTC One S using Tapatalk

Been told to downgrade my radio but reading guides says I can't do this on hboot 2.15 please could someone help point me the right direction. Just want to get back to stock
Sent from my HTC One S using Tapatalk

stoneblade said:
Been told to downgrade my radio but reading guides says I can't do this on hboot 2.15 please could someone help point me the right direction. Just want to get back to stock
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
Are you on MaximusHD rom? what are you using currently?

Hi I was using magiorom and having some reboots, so want to go back to stock(just ordered Nexus 5) ready to sell on the phone. Currently have zenrom installed but would love to be able to get back to stock either Europe ruu or original O2. In the past having phone rooted lowers price because some people don't want to have the root option, and some apps don't allow it eg Barclays or sky
Sent from my HTC One S using Tapatalk

Even a nanoid without super user or root would do, just back to stock as close as possible. Major noob mistake not to make my own nanoid when first started, learnt for next time!
Sent from my HTC One S using Tapatalk

stoneblade said:
Even a nanoid without super user or root would do, just back to stock as close as possible. Major noob mistake not to make my own nanoid when first started, learnt for next time!
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
Yeah I have a nandroid in my thread. Refer to my signature. It's for T-Mobile UK but it will work for you.

khan.orak said:
Yeah I have a nandroid in my thread. Refer to my signature. It's for T-Mobile UK but it will work for you.
Click to expand...
Click to collapse
Great thanks, is it rooted? I will have a look after breakfast
Sent from my HTC One S using Tapatalk

stoneblade said:
Great thanks, is it rooted? I will have a look after breakfast
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
No it's not.
Sent from my HTC One S using Tapatalk

khan.orak said:
No it's not.
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
Mate you have saved my life, phone back to semi normal stock (add tmobile logos) but its way closer than what was on there before. Im guessing I have to leave the bootloader unlocked but can install stock recovery?

stoneblade said:
Mate you have saved my life, phone back to semi normal stock (add tmobile logos) but its way closer than what was on there before. Im guessing I have to leave the bootloader unlocked but can install stock recovery?
Click to expand...
Click to collapse
Flash Stock recovery, and then if you want, you can lock bootloader.

htc one s can't fnd officiall rom

hi i'm having an htc one s
Tampered
Unlocked
Vle PVT SHIP S-ON RL
HBOOT 2.15.0000
RADIO-1.13.50.05.31
OPEN DSP -V31.1.0.45.0815
EMMC-BOOT
and i try to flash official rom :
RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110_Radio_16.12.20.02U_16.05.20.16_M2_release_263510_signed
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5
it doesn't work wich version should i use the phone has a logo of t-mobile .
thanks

What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk

there is no cid mentioned.....
LS.xD said:
What's your CID? You need a RUU matching your CID
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse

c.vadim said:
there is no cid mentioned.....
Click to expand...
Click to collapse
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?

yes phone is brick hanging on logo
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT26HW401400
(bootloader) imei: 359902043656481
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3890mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse

You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.

can i write that firmware by TWRP ?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse

No. You can flash it using fastboot commands
Sent from my beloved HTC One S using (most time buggy) Tapatalk

Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
LS.xD said:
You need the TMOUS 3.14 RUU. But Androidruu.com is down at the moment. You'll have to way a while until the servers are online again.
You can flash this firmware.zip --> LINK
and install a custom rom if you don't want to wait.
Click to expand...
Click to collapse

c.vadim said:
Androidruu.com it's back but i can't find TMOUS 3.14 RUU. other source?
Click to expand...
Click to collapse
Here it is on Androidruu.com --> TMOUS 3.14

Error 155 Unknown error
"The Rom update utility cnnot update your Android phone.
Please get the coreect ROM Update Utility and try again.
any solution ?

You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk

done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
LS.xD said:
You need to relock the bootloader before running the RUU
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse

after sofware phone powers on and works ok... but in conversation it has no sound
c.vadim said:
done, thanks for your help. ... if i have another one new and i want to change the languages what should i do ?
Click to expand...
Click to collapse

Hi
Can you tell me from this output which shipped firmware should I try to revive one HTC one s which just hangs at HTC logo?
Code:
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.09.0001
(bootloader) version-baseband: 16.05.20.16_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.11.401.110
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH264W402222
(bootloader) imei: 352762055720535
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f616909f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.484s
LS.xD said:
Connect your phone in fastboot mode. Open CMD and type "fastboot getvar all" as it will show you full phone info.
BTW why you need the RUU, have bricked the device?
Click to expand...
Click to collapse

Dead M8 after flashing GPE firmware

I'm really in need of help here
so first some background, i have a verizon htc one m8 being used on a gsm carrier outside of the us..i had the latest digital high rom running with his 5.0 firmware and supercid as well as googleplay MID
today i tried to flash the latest GPE firmware 5.0.1 and after a sucessfull flash the phone went back to the bootloader screen but this time its black and not white as before and for some reason it deleted my os and partitions..now i am stuck in bootloader and even tho i am able to flash twrp recovery each time i install a rom via RUU (in this case stock gpe rom since i changed the phone to gpe) it will not boot into the rom..ive tried and searched all day but cant find anything that helps
i tried flashing digital highs's firmware again but it does not change/overwrite the gpe firmware
and i am unable to flash a stock verizon RUU because the MID has changed..
BTW my sdcard slot does not work
C:\android-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT43XSF01633
(bootloader) imei: 990004998541332
(bootloader) imei2: Not Support
(bootloader) meid: 99000499854133
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.029s

kooliebwoy said:
I'm really in need of help here
so first some background, i have a verizon htc one m8 being used on a gsm carrier outside of the us..i had the latest digital high rom running with his 5.0 firmware and supercid as well as googleplay MID
today i tried to flash the latest GPE firmware 5.0.1 and after a sucessfull flash the phone went back to the bootloader screen but this time its black and not white as before and for some reason it deleted my os and partitions..now i am stuck in bootloader and even tho i am able to flash twrp recovery each time i install a rom via RUU (in this case stock gpe rom since i changed the phone to gpe) it will not boot into the rom..ive tried and searched all day but cant find anything that helps
i tried flashing digital highs's firmware again but it does not change/overwrite the gpe firmware
and i am unable to flash a stock verizon RUU because the MID has changed..
BTW my sdcard slot does not work
C:\android-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT43XSF01633
(bootloader) imei: 990004998541332
(bootloader) imei2: Not Support
(bootloader) meid: 99000499854133
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.029s
Click to expand...
Click to collapse
Pm me teamviewer info and I can help you.
---------- Post added at 05:50 PM ---------- Previous post was at 05:06 PM ----------
kooliebwoy said:
I'm really in need of help here
so first some background, i have a verizon htc one m8 being used on a gsm carrier outside of the us..i had the latest digital high rom running with his 5.0 firmware and supercid as well as googleplay MID
today i tried to flash the latest GPE firmware 5.0.1 and after a sucessfull flash the phone went back to the bootloader screen but this time its black and not white as before and for some reason it deleted my os and partitions..now i am stuck in bootloader and even tho i am able to flash twrp recovery each time i install a rom via RUU (in this case stock gpe rom since i changed the phone to gpe) it will not boot into the rom..ive tried and searched all day but cant find anything that helps
i tried flashing digital highs's firmware again but it does not change/overwrite the gpe firmware
and i am unable to flash a stock verizon RUU because the MID has changed..
BTW my sdcard slot does not work
C:\android-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT43XSF01633
(bootloader) imei: 990004998541332
(bootloader) imei2: Not Support
(bootloader) meid: 99000499854133
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.029s
Click to expand...
Click to collapse
And don't do anything else in the meantime to it.

dottat said:
Pm me teamviewer info and I can help you.
---------- Post added at 05:50 PM ---------- Previous post was at 05:06 PM ----------
And don't do anything else in the meantime to it.
Click to expand...
Click to collapse
thanks alot for the response..It looks like i have found a solution....
it seems that the hboot got updated which caused the problem i downloaded firewaters hboot and flashed it which allowed me to sideload dh custom rom and with that as soon as i got into the rom i changed back to VZW official 4.4.4 firmware to get the latest compatible hboot and then did another flash of dh's custom 5.0 firmware and finally reflashed the OS with my prefered settings and im currently updating all my apps..so far the device functions fine
I hope this helps someone else who may get into this dilemma..

kooliebwoy said:
thanks alot for the response..It looks like i have found a solution....
it seems that the hboot got updated which caused the problem i downloaded firewaters hboot and flashed it which allowed me to sideload dh custom rom and with that as soon as i got into the rom i changed back to VZW official 4.4.4 firmware to get the latest compatible hboot and then did another flash of dh's custom 5.0 firmware and finally reflashed the OS with my prefered settings and im currently updating all my apps..so far the device functions fine
I hope this helps someone else who may get into this dilemma..
Click to expand...
Click to collapse
helped me ty

Same issue with my m8 whl
kooliebwoy said:
thanks alot for the response..It looks like i have found a solution....
it seems that the hboot got updated which caused the problem i downloaded firewaters hboot and flashed it which allowed me to sideload dh custom rom and with that as soon as i got into the rom i changed back to VZW official 4.4.4 firmware to get the latest compatible hboot and then did another flash of dh's custom 5.0 firmware and finally reflashed the OS with my prefered settings and im currently updating all my apps..so far the device functions fine
I hope this helps someone else who may get into this dilemma..
Click to expand...
Click to collapse
hi i have an htc one m8_whl(sprint unlocked gsm bought from aliexpress refurbished). S-off Unlocked boot loader, Rooted. it was on 4.4.2 i tried to flash this rom using adbRUU-HTC_One_M8_GPE_5.1-4.04.1700.4.zip(from graffixnyc ). i had installed twrp custom recovery before. now when i flashed this rom after i rebooted its just stuck at boot loader page. i can go to recovery options and i did sideload this rom again but it didn't work. same stuck at boot loader page. please help me with this situation. i really wanna install GPE rom on my phone.

ksingh007 said:
hi i have an htc one m8_whl(sprint unlocked gsm bought from aliexpress refurbished). S-off Unlocked boot loader, Rooted. it was on 4.4.2 i tried to flash this rom using adbRUU-HTC_One_M8_GPE_5.1-4.04.1700.4.zip(from graffixnyc ). i had installed twrp custom recovery before. now when i flashed this rom after i rebooted its just stuck at boot loader page. i can go to recovery options and i did sideload this rom again but it didn't work. same stuck at boot loader page. please help me with this situation. i really wanna install GPE rom on my phone.
Click to expand...
Click to collapse
sprint isnt a gsm native phone. You are in the verizon section and likely will have more luck in either the regular M8 section and likely less luck in the sprint section. You will have no luck here.....

Need Help plz
dottat said:
Pm me teamviewer info and I can help you.
---------- Post added at 05:50 PM ---------- Previous post was at 05:06 PM ----------
And don't do anything else in the meantime to it.
Click to expand...
Click to collapse
Hello plz help me out my htc m8 just got dead, i was going back to stock with ARU wizard after 80% phone got stuck and now dead tried all methods volume+power buttons but no luck so plz help me

ok_then_so said:
Hello plz help me out my htc m8 just got dead, i was going back to stock with ARU wizard after 80% phone got stuck and now dead tried all methods volume+power buttons but no luck so plz help me
Click to expand...
Click to collapse
Is your battery dead?
Sent from my HTC6535LVW using Tapatalk

dottat said:
Pm me teamviewer info and I can help you.
---------- Post added at 05:50 PM ---------- Previous post was at 05:06 PM ----------
And don't do anything else in the meantime to it.
Click to expand...
Click to collapse
I need HTC Desire 620G dual sim stock rom. Can you please help me sir.

punkshamil said:
I need HTC Desire 620G dual sim stock rom. Can you please help me sir.
Click to expand...
Click to collapse
No.
Sent from my XT1575 using Tapatalk