Database Info

[KERNEL] [Jun6] [flo/deb] Bulletproof 2.2 | Optimized stock | S2W/DT2W - Nexus 7 (2013) Android Development

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bulletproof Kernel
Bulletproof is an enhanced stock kernel designed to be simple and stable. It is highly optimized for smooth performance and extended battery life and extends functionality with sweep2wake, doubletap2wake, USB fastcharge and option to disable the magnetic lid sensor.​
Click to expand...
Click to collapse
Code:
[COLOR="black"]
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems![/COLOR]
FEATURES
compatible with flo (wifi only) or deb (lte version)
easy installation and configuration with Aroma installer
optimized for extended battery life
linaro 4.9.1 -O3 build
complete user voltage control
sweep2wake
doubletap2wake
enable/disable magnetic on/off
optional USB fastcharge
NTFS r/w support
DOWNLOAD
Android 4.4.3
Bulletproof-N7-2.2
Android 4.4.1 and 4.4.2:
Bulletproof-N7-2.1
Android 4.4:
Bulletproof-N7-2.0
Android 4.3
Bulletproof-N7-1.4
For more options and tweaking, try my other kernel: ElementalX
Previous version:
Bulletproof-N7-1.3
Bulletproof-1.2
Bulletproof-1.1
Bulletproof-1.0
INSTALLATION
1. Install zip from Recovery
2. Reboot!
Please hit the Thanks button if you download this
If you really like it, please consider a donation as a small reward for the countless hours I spend creating this work.
Thanks to those who have donated!
NOTES
Kernel Tuner/TricksterMod, etc
You don't need these apps because the Bulletproof installer sets everything up automatically, but if you want to check or change settings, you can use these apps. Just be aware that some of them (e.g. Kernel Tuner) are set by default to apply settings on boot, which can interfere with the settings you chose in the Bulletproof installer.
Sweep2Wake
Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep). The options are: sweep2wake/sweep2sleep, sweep2sleep only, and disabled. If you use apps such as Kernel Tuner, the sweep2sleep only option can be selected by choosing "On with backlight".
/sys/android_touch/sweep2wake
0=disabled
1=enable sweep2wake + sweep2sleep
2=enable sweep2sleep only
Shortsweep
Enabling this makes sweep2wake work with a shorter sweep distance. You can edit /etc/elementalx.conf to change the setting on boot.
/sys/android_touch/shortsweep
0 = disabled
1 = enabled
DoubleTap2Wake
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping in the bottom inch or so of the screen, above the capacitive buttons.
/sys/android_touch/doubletap2wake
0=disabled
1=enable doubletap2wake
CPU voltages
CPU voltages are fully customisable with apps such Kernel Tuner or Trickster Mod. Be careful, lowering voltages can cause instability. Generally, having reboots while the phone is asleep is a sign that your minimum voltage is too low. The minimum voltage allowed is 700mV.
Be careful with undervolting. If you have bluetooth or sound issues, try increasing the minimum voltage.
NTFS support
This is for anyone who wants to use OTG to connect a USB stick or portable harddrive formatted with Microsoft's NTFS filesystem. You may need Stickmount or a similar app to mount.
Click to expand...
Click to collapse
​
CHANGELOG
December 7, 2013 - Bulletproof-N7-2.1
-support Android 4.4.1
November 21, 2013 - Bulletproof-N7-2.0
-support Android 4.4 (kitkat)
-support USB 3g dongles
October 15, 2013 - Bulletproof-1.4
-update installer
-add S2W power key suspend toggle
-add options to disable sweep2sleep in portrait or landscape mode
-add battery life extender (thanks tni_andro)
-battery guage enhancements (thanks tni_andro)
-kexec-hardboot patch (for multirom)
September 26, 2013 - Bulletproof-1.3
-qseecom: Fix issue with incomplete command exiting prematurely
August 27, 2013 - Bulletproof-1.2
-add faux sound support
August 23, 2013 - Bulletproof-1.1
-update touch firmware to A042
-disable pack feature for Hynix part
August 18, 2013 - Bulletproof-1.0
-cleanup from other kernels
-option to disable magnetic on/off
-installer ensures mpdecision and thermald are present
-build -O3 with linaro 4.8 toolchain
-add TCP congestion control algorithms
-update ARM topology
-add cpu_power driver
-Makefile optimizations
-hsic wakelock tweak
-optimized AES and SHA1 routines
-lower possible voltage to 700
-add /dev/frandom
-ntfs r/w support
-fast rcu nohz
-intellidemand governor
-add FIOPS and SIO i/o schedulers
-force fastcharge
-voltage control
-sweep2wake
-doubletap2wake
Click to expand...
Click to collapse
SOURCE
Bulletproof-flo
..........................
XDA:DevDB Information
Bulletproof Kernel | Optimized stock | S2W/DT2W, Kernel for the Nexus 7 (2013)
Contributors
flar2
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.2
Stable Release Date: 2013-12-06
Created 2013-08-18
Last Updated 2014-06-08

Reserved

Wooo. Great work flar.

Thanks for another kernel to try
Sent from my Nexus 7 using Tapatalk 4

Thanks for the kernel but what is the difference between this and ElementalX?

qrsy2k said:
Thanks for the kernel but what is the difference between this and ElementalX?
Click to expand...
Click to collapse
Just hit thanks and now wondering the same

This one is stock with s2w, dt2w, and the fastcharge and magnet options.
No overclocking, no automatic undervolting, no messing with thermal. Default governors and schedulers.

Thnks
Hi, thnks for this kernel
But NTFS support does not work for me. I used Stick mount pro as mounter and it does not mount the usb memory

I know you were working on this but I didn't realize it would be released to soon! Thanks a lot!

I've been using your ElementalX its great I will give this bad boy a shot tonight.

Never mind. Wrong thread.
来自 HTC One 上的 Tapatalk 4

Great kernel! I'm wondering is a way to enable sweep2lock?

krnchicken753 said:
Great kernel! I'm wondering is a way to enable sweep2lock?
Click to expand...
Click to collapse
Already does that. Check out the video in the OP.
Sweeping from right to left across the bottom of the screen (where the back, home and recent buttons are) will put the tablet to sleep.

flar2 said:
Already does that. Check out the video in the OP.
Sweeping from right to left across the bottom of the screen (where the back, home and recent buttons are) will put the tablet to sleep.
Click to expand...
Click to collapse
Wow can't believe I didn't catch that. Thanks!

flar2 said:
Already does that. Check out the video in the OP.
Sweeping from right to left across the bottom of the screen (where the back, home and recent buttons are) will put the tablet to sleep.
Click to expand...
Click to collapse
Sorry to ask a question but, how do i clean the kernel?

So do S2W and DT2W have any major impact on standby battery life? I flashed this last night and enabled those features until my case arrives. It has a magnet, so I'll probably disable these features when it arrives. I just didn't want to constantly use the power button.
Sent from my ADR6425LVW using xda app-developers app

RKight said:
So do S2W and DT2W have any major impact on standby battery life? I flashed this last night and enabled those features until my case arrives. It has a magnet, so I'll probably disable these features when it arrives. I just didn't want to constantly use the power button.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
If they do we cant tell. The table gets amazing battery life even bone stock.

ocman40 said:
If they do we cant tell. The table gets amazing battery life even bone stock.
Click to expand...
Click to collapse
Oh, I've noticed. Lol. Thanks for the reply. That's all i needed to hear and I think I'll be fine until I get my case. I've got mine running Juice Defender and Greenify, and the battery life is just nuts compared to my first gen N7.
Sent from my ADR6425LVW using xda app-developers app

Awesome! The other Elemental just crash with Cyanogrnmod, bit this is justo like the name says, bulletproof! And not only that, its súper smooth and even gets 7100 in quadrant! At stock speed! Thank you for this amazing kernel, you are the best :good:

Hi! I kept with the default option when I was flashing the zip, and so I gave sweep2wake, sweep2lock, doubletap2wake.
One question, other than sweeping the bottom capacitive buttons to lock, I noticed sweeping downwards from the top right corner to the bottom right corner also locks the device, any way to just enable the bottom area?
Sent from my GT-N7105 using xda app-developers app

Related

Hello Everybody!
So, this is some kernel code that I ported over from the lovely Jugs0.3 kernel and Synergy kernel for T-Mobile SGS II, applied to our fancy pants Skyrocket. The codebase has been brought nearly up to parity with codeaurora msm kernel and I have also patched out several buggeroonskis.
It's tested by myself and the awesome guys in irc.irondust.net #skyrocket, thanks fellers!
This version has OC support to 1.863GHz and 1.6v, with BFQ, UV/OC support, init.d support, BLN support, compiler optimizations, and insecure (for adb root access)
It is packaged as a CWM zip for the easy flashing.
Thanks to the awesomeness known as k0nane for hosting!
[size=+3]
0.42 Download
AT&T 0.42
Rogers 0.42
[/size]
Overclock/Voltage script (Flashable CWM zips)
1.72GHz
1.78GHz
1.83GHz
[size=+3]Original Kernels and stock files to restore from CWM[/size]
AT&T: Original Kernel/init.qcom.rc/lights.msm8660.so CWM zip
Rogers: Original Kernel/init.qcom.rc/lights.msm8660.so CWM zip
NOTE: 1.78GHz is about all I can run stable, and running with 192MHz active seems to cause SoD for me. Careful with undervolting. A few people have reported filesystem corruption resulting in force closes every bootup when volts are too low, resulting in the need to flash the original recovery.img (CWM will not fix it), and wipe data/cache to restore phone.
Old Versions said:
AT&T 0.41 (Mirror)
Rogers 0.41 (Mirror)
AT&T 0.4 (Mirror)
Rogers 0.4 (Mirror)
AT&T 0.3: AT&T Kernel 0.3
Rogers 0.3: Rogers Kernel 0.3
AT&T Kernel 0.3-pre2
Rogers Kernel 0.3-pre2
AT&T 0.2 kernel (no rogers release for 0.2)
dag-sgh-i727-183ghz-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-183ghz-1325v-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-178ghz-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-172ghz-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-167ghz-initd-unsecure-kernel-0.1.zip
Click to expand...
Click to collapse
As it is using the same OC/UV codebase as t-mobile sgs ii, the same tools apply to adjusting OC/UV: 1,2,(guide to creating voltage control scripts)
Changelog:
0.42
- New sysfs interface allowing tweaking of voltages and frequencies beyond CPU: L2 Frequency, sys_vdd, vdd_dig, vdd_mem, L2 <---> CPU frequency mapping
0.41
- Fixed a crash with video playback in 0.4
0.4
- Merge to codeaurora msm kernel, bringing in a few months worth of patches
- Multiple optimizations to audio/video encoding/decoding path
- Fixed CPU1 locking at lower speeds
- AAC Multi-Channel/Dual-Mono audio decoding support
- Added lower 3D GPU step for power saving on less demanding 3d apps
- Multiple power saving features
- Tons of debug code removed
- Compressed with xz for a smaller kernel
- Reduced latency for CPU1 hotplug for faster bringup/shutdown
- Scheduling improvements, ARM SMP Ticketing
0.3
- re-built from rogers source, with OC/UV code from romanbb/faux123/mr.x
- ondemand, interactive, userspace, performance, conservative, lagfree, smartassV2 governors
- Deeper sleep state enabled and lowest stepping reduced to 54MHz - should improve battery life vs. stock kernel (may be offset by GPU OC)
- 25mV undervolt across the board
- bus speeds/volts reduced slightly for stability
- GPU overclock 30mhz on 3d core and 10mhz on 2d core
- Autoscheduling implemented
- 1.83GHz step currently not working, seems to be related to GPU overclock and over-current protection. Setting 1.83GHz step causes weirdness like one core locking to 900mhz while the other core reports 1.83 and is really running 1.78. Stick to 1.78 max for now.
- USB OTG support is enabled - I have no devices/cables to test this functionality, please report!
0.2
Merged in some parts of Synergy kernel
Set to no OC/UV by default, use System Tuner or similar to apply OC/UV
BFQ Scheduler
lagfree/ondemand[X]/interactive[X]/performance/smartassV2 governors (default ondemand)
384mhz minimum by default (192 may cause problems)
BLN (use bln control app from market to activate and control)
Shut down issue fixed
Bootanimation reverted to samsung for the mo (weirdness with /system/bin/bootanimation?)
0.1
First Release, based on romanbb's jugs kernel
Source located here:
https://github.com/dagnarf/dagkernel

The obligatory screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reserved2!

I'm k0nane, and I approve this message. Shouts to #skyrocket and the Hit Squad.

here are some proof
Here are some screen shots of the new Kernel running
Have fun guys. You guys will definitely feel a difference on your Skyrocket

Runs well, had to slightly declock to 1780 to run benchmarks without the phone rebooting itself.
Sent from my SGH-T989 using xda premium

Same here. Just as the T-Mobile was unstable at 1.8, so is this but my gosh, it is fast!! Thank you for the port.

Da_G said:
First version here has OC support to [email protected], with UV support, init.d support, boot anim support, compiler optimizations, and insecure (for adb root access)
Click to expand...
Click to collapse
Since this is a port from Jugs does it support BLN also?

Girn said:
Runs well, had to slightly declock to 1780 to run benchmarks without the phone rebooting itself.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
So, what are the benchmarks at? Will be flashing soon.

Gr8Danes said:
So, what are the benchmarks at? Will be flashing soon.
Click to expand...
Click to collapse
wanna say in the 4100's high side really nice
any of you folks running this with the skystocketeer ROM? thanks for the feedback

Running with SkySTOCKeteer (although I may have to go back until the Clock is brought back 0.o)
At 1.72ghz
Out of 5 runs
My highest quadrant 4400
Lowest Quadrant 3680
AnTuTu 6608 (best of 3 runs)

Is anyone having any issues with downloading content from the Market (non WiFi)?

No problem with Market via data here.

Which clock is out? Crawl. I use this as more of a daily driver than an experimental devoted device
2.5 yr old will def change it up for ya
Sent from my SAMSUNG-SGH-I727 using xda premium

I have no clock app, at all. (the normal Android Clock app is gone) with SkySTOCKeteer

crawlgsx said:
I have no clock app, at all. (the normal Android Clock app is gone) with SkySTOCKeteer
Click to expand...
Click to collapse
So no statusbar clock?
If answer is no - same reason for me to hold off until development passes the stock hashmark?
Sent from my SAMSUNG-SGH-I727 using xda premium

jcvancleve said:
So no statusbar clock?
If answer is no - same reason for me to hold off until development passes the stock hashmark?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
The Statusbar clock is there, the lockscreen clock is there, there is no clock APP.

You fellas an your fancy clocks..
Sent from my SAMSUNG-SGH-I727 using xda premium

Just installed the kernel.
Booted up.
Waited a couple minutes.
Then kicked off AnTuTu.
About ten seconds later, the phone rebooted.
It's cycling.
Rebooting over and over.
Gets to the lock screen and a few seconds later it reboots.
Over and over. lol
Only other mod is the T-Mobile BeastMod ROM using r34p3rex's method for running TMO ROM's on the Skyrocket.
I'm guessing this kernel is conflicting with that somehow.

CZ Eddie said:
Just installed the kernel.
Booted up.
Waited a couple minutes.
Then kicked off AnTuTu.
About ten seconds later, the phone rebooted.
It's cycling.
Rebooting over and over.
Gets to the lock screen and a few seconds later it reboots.
Over and over. lol
Click to expand...
Click to collapse
Did you install something to change the clock? It does not like 1.8ghz, clock it down to 1.78/1.72 and try again.
Though it may not like the Tmobile stuff too, not sure.

Please try shadow, samurai, and stock kernels also for a bit to see what one you like best! Don't choose a kernel because everyone else likes it or because it has a long feature list and fancy new shiny things.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a kernel, not a full ROM... please use AOKP, MIUI4, or CM9 with this...
Atarashii - New/Fresh - This kernel was made to revolutionize what all of the current 'normal' Epic kernels have. I have added in tweaks and mods that were never before seen on the Epic, long forgotten, and from other devices such as the Nexus S and i9000.
Hopefully (probably) most other kernel developers will implement these new features and help keep the Epic current.
I prefer that you use NSTools to overclock and undervolt and do other tweaks. It is more featured than Voltage Control and this kernel supports it better. Voltage Control works fine too but I recommend uninstalling all cpu tools you have and installing NSTools.
I am not responsible to ANYTHING that happens to you or your phone as a result of using this kernel. Most things in this are experimental to a point but have been tested and confirmed safe.
Some of these features have NEVER been used before on the Epic, so don't expect everything that you are used to. Things can and will be different than usual.
​
Feature List
Voodoo Sound v10 by Supercurio
Voodoo Color by Supercurio
Optimized compiler flags by netarchy and Ezekeel
Live OC (on the fly bus overclock) by Ezekeel (Use NSTools app, not voltage control)
Custom Undervolt by Ezekeel (Use NSTools app, not voltage control)
Misc. bugfixes
Battery Life eXtender (BLX) v1 by Ezekeel
OS tools compiled with O3
Swappiness set to 10 from 60 (Rodderik)
Voodoo mDNIe (keeps text sharp and backgrounds don't look like crap)
Defconfig tweaks
Overclocking (no need for enabling crap in Voltage Control)
Undervolting both via Voltage Control and NSTools (Ezekeel & nubecoder)
Tweaked ondemand
Tweaked conservative
Optimized SIO
Optimized deadline
Added TINY_PREEMPT_RCU
Added optimized CRC32 algorithm
Optimized ARM RWSEM algorithm
JHash 3
Added SLQB memory allocator
Add 3 Button Reboot
Increase default readahead to 1024kB
Voodoo Color defaults that do not suck
Allow CPU-supported unaligned accesses
Some SD/MMC tweaks (might reduce wakelocks)
mDNIe is enabled but tweaked to look good
Swag
Major thanks​
Ezekeel
Team Glitch
Epiccm team
bbelos
nubecoder
nullghost
rodderik
supercurio
Aprosamurai
thomasskull666
Many many others
Source
https://github.com/marcusant/Atarashii
Download
v5 w/ Voodoo: http://marcusant.com/nyankernel/epic/nyan_v5_perm.zip
a0e5cca4fdc856c4468f8188e5d0c871
v5 w/o Voodoo: http://marcusant.com/nyankernel/epic/nyan_v5_perm_noVoodoo.zip
ce52381883c180a09aefb2e3e427e730
Replace TWRP with CWM (flash within TWRP with inject off): http://marcusant.com/android/epic/restore-cwm.zip ​

Changelog​
v5 WiP
-Update to beta3 of cm9
-Change DVFS relayed things
-Cypress touch key fixes
-Update to kernel 2.35.13 (still listed as .7)
-Switch to git SHA1
-Add boot progress bar
-Switch to crespo mdnie
-Reduce log buffer size
-Battery updates from infuse
-KSM
-ULP_FREQ lowered to 400mhz
-Sysfs control for capacitive lights
-Glibc versions of string and memcopy
-Add proportional rate reduction
-Fix Google Maps
-Increase USB strength
-More
v4.1
-Fix green flashing to some extent
v4.2
-Add TWRP (may go back to CWM) (Dees-Troy)
v4.3
-Add some misc stuff
-Switched to voodoo color settings from bbelos
-Fixed some sleeping stuff and 100mhz (mkasick)
-Increase USB strength
-Add sysfs control for softkeys (bbelos)
-Update to current beta3 of CM9 (still works on AOKP and older CM9 builds)
-Fixed GMaps​

WOW finally 1st on a post!
And what a post to be FIRST on...Thank a ton marcusant! DL'ing NOW

Very interesting, I'll definitely be looking over your code tomorrow morning while I'm at the doctor's office lol. Good work my friend, this is definitely another big step forward for the Epic!
Sent from my SPH-D700 using xda premium

Nice Marcus!
All these new tweaks really got me curious!
I'm gna flash it and see how my phone likes it.
Pretty excited to try this kernel out
Sent from my SPH-D700 using xda premium

thomasskull666 said:
Very interesting, I'll definitely be looking over your code tomorrow morning while I'm at the doctor's office lol. Good work my friend, this is definitely another big step forward for the Epic!
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I used some of your old things for voodoo (needed to be added to a new file and changed a bit) so thanks!
Sent from my SPH-D700 using Tapatalk

OP cleaned up a bit.

downloading
hey so im anoob at this at uv and oc
whats the purpose of these two?

Thanks! DL'n Now!
---------- Post added at 11:53 PM ---------- Previous post was at 11:52 PM ----------
diablo311 said:
downloading
hey so im anoob at this at uv and oc
whats the purpose of these two?
Click to expand...
Click to collapse
UV to save battery!
OC to make your phone snappy!

downloaded and flashed.
booting up .......
ummmm one more thing tho
how wud i set up the uv to save battery? im sorry i know its off topic but i just thought about asking this sorry,...

One of the first, flashing it now, thanks!!

Flashed and running on B31. Looking good so far Marcus. Any type of behavior we should be looking out for due to some of these "new/old" tweaks?
Sent from my SPH-D700 using xda premium

One of the clear changes is that the whole color scheme appears a little bluish. It's not bad, but is there a way to revert back to natural colors? Thanks!
Sent from my SPH-D700 using XDA

incisivekeith said:
One of the clear changes is that the whole color scheme appears a little bluish. It's not bad, but is there a way to revert back to natural colors? Thanks!
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
I'm going to change that but for now you can just change it in the "voodoo sound" app under samoled
Sent from my SPH-D700 using Tapatalk

marcusant said:
I'm going to change that but for now you can just change it in the "voodoo sound" app under samoled
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Actually I'm liking the change in the color scheme - I was just wondering how to revert back if needed.
Another thing I noticed is that while scrolling in XDA threads it stutters. It might be just me but still wanted to point out.
As someone asked it would be really nice to know what kind of good changes we should expect from this kernel. It looks good.
Sent from my SPH-D700 using XDA

MD5?

Not the worst thing in the world but for about the last 4 seconds of boot and then until my sd card has been scanned, everything has a heavy green overlay.
Sent from my SPH-D700 using XDA

Also NSTool won't let me set battery charge to above 96%. Not sure if that is relevant to the kernel or if that is an app "feature" though.
Sent from my SPH-D700 using XDA

marcusant said:
How to overclock
Download NSTools from the market
Go to the CPU tab
Set the max frequency to what you want
Liveoc is really buggy and I need to talk to thomasskull about some RAM things to make sure I do not brick anybody. For now, do not mess with liveoc and keep it at 100%.
How to undervolt
Download Voltage Control (this is also possible via nstools)
Slide to the voltages tab
Click on a frequency
Slide the slider to change UV value and apply
Click to expand...
Click to collapse
So we should have both nstools and vc installed and running at the same time if Iwant to oc and uv? What kind of downside to the kernel if I want to use vc for both ocing and uving? *

riotkid976 said:
Not the worst thing in the world but for about the last 4 seconds of boot and then until my sd card has been scanned, everything has a heavy green overlay.
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
I just noticed that when I unlock my phone there is a green film covering the screen for a fraction of a second.
It seems my Epic can't handle 1.4 GHz speed as it hangs and restarts, so I am decreasing the clock speed. Does anyone have issues like me at 1.4?
Sent from my SPH-D700 using XDA

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bulletproof Kernel
for Sense-based Jelly Bean ROMs​
This is an optimized stock kernel tuned for stability and battery life with
a few added features like sweep2wake, NTFS, and higher refresh rate for HDMI output.
There is no overclocking, no scripts running at boot and no
installer options. It should just work.
Code:
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this software,
* I am not responsible for any damage or problems!
FEATURES:
based on HTC Jelly Bean source code 3.17
Aroma installer
optimized for extended battery life
sweep2wake
doubletap2wake [NEW!]
pocket detection to prevent accidental wakes [NEW!]
button light notification [NEW!]
/system writable
NTFS r/w support
governors: intellidemand (default), badass, lagfree, lionheart
i/o schedulers: ROW (default), FIOPS, SIO
increased refresh rate for HDMI output via MHL adapter
user voltage control
optimized -O3 Linaro 4.7.3
fastcharge
works with SD Manager in ViperXL 3.2.7
DOWNLOAD
For Sense 5 Android 4.2.2:
Install ElementalX with vanilla settings and you will have Bulletproof Kernel:
ElementalX:http://forum.xda-developers.com/showthread.php?t=2061577
Bulletproof-1.5.1
Previous versions:
Bulletproof-1.4
Bulletproof-1.3
Bulletproof-1.1
Bulletproof-1.0
Please hit the Thanks button if you download this
If you really like it, please consider buying me a beer
Actually, I won't spend it on beer. I'm saving it all up to buy my next device
Thanks to those who have donated!
INSTALLATION
1. Install zip from TWRP Recovery
2. Reboot!
S-OFF required!
NOTES
Voltage Control
Bulletproof uses HTC default voltages for guaranteed stability. For the adventurous, you can use apps like Kernel Tuner or Venom Tweaks to adjust your voltages manually. Warning: lowering your voltages can result in instability. Please don't report problems if you are undervolting.
Sweep2Wake
Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep). There are now options for sweep2wake/sweep2sleep, sweep2sleep only, and disabled. If you use ViperXL, make sure to enable sweep2wake in Venom Tweaks.
/sys/android_touch/sweep2wake
0=disabled
1=enable sweep2wake + sweep2sleep
2=enable sweep2sleep only
DoubleTap2Wake
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping in the bottom inch or so of the screen, above the capacitive buttons. You can edit /etc/elementalx.conf to change the setting on boot.
/sys/android_touch/doubletap2wake
0=disabled
1=enable doubletap2wake
Pocket Detection
Pocket detection protects against accidental wakes while S2W, DT2W or L2W are enabled and the phone is in your pocket. Pocket detection uses the proximity sensor. A few people have a problem with their proximity sensor that makes DT2W not work, so I've made an option to disable pocket detection. You can edit /etc/elementalx.conf to change the setting on boot.
/sys/android_touch/pocket_detect
0=disabled
1=enable pocket detection
Button Light Notification
With Button Light Notification (BLN), the capacitive buttons will blink on and off when you have a new notification. As soon as the screen comes on, BLN is canceled and the lights will no longer blink until you have another notification. Please note that if you have your screen set to turn on when a message arrives, you will not see the buttons blinking because once the screen comes on, the button light notification is canceled. You can edit /etc/elementalx.conf to change the setting on boot.
/sys/class/leds/button-backlight/bln
0 = disabled
1 = BLN enabled
Click to expand...
Click to collapse
Special thanks:
zarboz and Sbryan12144 for porting S2W to our device
backfromthestorm for fstrim
xHausx and amarullz for installer stuff
tbalden for bln
​
CHANGELOG:
August 18, 2013 - Bulletproof-1.5.1
-fix init.d support
July 29, 2013 - Bulletproof-1.5
-remove OTG whitelist to enable more devices
-build with Linaro 4.8
-add TCP congestion control algorithms
-default governor is ondemand
-default scheduler is cfq
-add optional bulletproof init.d script
-update installer
May 26, 2013 - Bulletproof-1.4
-fix fm radio
-revert autogroup: group by current UID
-add DoubleTap2Wake
-pocket detection (prevent accidental wakes with s2w and dt2w)
-add button light notification
-arm/crypto: Add optimized AES and SHA1 routines
April 13, 2013 - Bulletproof-1.3
-modification for SD manager in ViperXL 3.2.7
-fastcharge
-force ac for unknown chargers
-ROW (default scheduler)
-enable automatic process group scheduling
-switch do_fsync() to fget_light()
-use glibc string
-use glibc memcpy
-WiFi module fix (thanks thicklizard)
-various patches from ElementalX
March 23, 2013 - Bulletproof-1.1
-user voltage control
-compiled -O3 with Linaro 4.7.3
March 3, 2013 - Bulletproof-1.0
-based on HTC source code 3.17
-intellidemand default governor
-fiops default scheduler
-add sweep2wake
-init.d support
-ntfs r/w support
-fix HDMI refresh rate
-xz kernel compression
-arm cpu topology
-add fix for crash when wp_mod.ko loaded
-update cpupower according to cpu load
-adjust readahead to 2048
Click to expand...
Click to collapse
Source:
Bulletproof-1.0

This is very close to stock, except with a few features and optimizations. It should be very stable, as I do not change anything to do with voltages or clock frequencies.
Elemental X is my full featured kernel, with many, many options: http://forum.xda-developers.com/showthread.php?t=2061577
I felt there was a need for something simpler, as some people were having trouble understanding all the options in ElementalX. It's very easy to mess things up when there is full control over voltage and frequency settings.
There were also a lot of issues with the s-on and commandline customization, resulting in failure to install correctly, which caused bootloops. Bulletproof avoids all that.

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
Downloading know can't wait to try!!
Sent from my HTC One X using Tapatalk 2

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
I think I'm gonna jump back to a sense based ROM just to try this, sounds awesome!
Sent from my One X using Tapatalk 2

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
Booted up fine! S2W obviously works and super smooth!
Only weird thing was I went to kernel tuner cpu 0 min was set to 15?? Which is stock max and cpu 0 max was set to 0. Quick link of the cores and swapping the values on cpu 0 was easy! Thanks flar!!
If you ever need a tester or another one I can do it I'm always open!
Sent from my HTC One X using Tapatalk 2

Kole_Ackerson said:
Booted up fine! S2W obviously works and super smooth!
Only weird thing was I went to kernel tuner cpu 0 min was set to 15?? Which is stock max and cpu 0 max was set to 0. Quick link of the cores and swapping the values on cpu 0 was easy! Thanks flar!!
If you ever need a tester or another one I can do it I'm always open!
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
That's the way it is with the stock kernel, too.
I didn't change anything with frequencies or voltages.

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
flar2 said:
That's the way it is with the stock kernel, too.
I didn't change anything with frequencies or voltages.
Click to expand...
Click to collapse
Ok, so should I just change it back and don't screw with it? Lol
Sent from my HTC One X using Tapatalk 2

Kole_Ackerson said:
Ok, so should I just change it back and don't screw with it? Lol
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Shouldn't matter, it'll work the same either way. Even though the settings look strange, it is working normally.

Any chance we can get undervolt abilities on the next release?

I think this is also good.

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
Use elemental
Enviado desde mi HTC One X usando Tapatalk 2

flar2 said:
This is very close to stock, except with a few features and optimizations. It should be very stable, as I do not change anything to do with voltages or clock frequencies.
Elemental X is my full featured kernel, with many, many options: http://forum.xda-developers.com/showthread.php?t=2061577
Click to expand...
Click to collapse
So ideally this ought to give me better battery life than elemental?

pyromaniac1 said:
So ideally this ought to give me better battery life than elemental?
Click to expand...
Click to collapse
Elemental has all the same optimizations but also has undervolting, max screen off frequency and a minimum frequency of 192. But they'll probably be pretty close in battery life because bulletproof doesn't overclock anything.

flar2 said:
Elemental has all the same optimizations but also has undervolting, max screen off frequency and a minimum frequency of 192. But they'll probably be pretty close in battery life because bulletproof doesn't overclock anything.
Click to expand...
Click to collapse
So essentially similar battery life, but more stability is the prime concern for this kernel?

pyromaniac1 said:
So essentially similar battery life, but more stability is the prime concern for this kernel?
Click to expand...
Click to collapse
Both have stability as their primary concern. The difference is elemental allows access to all kinds off settings that can lead to instability. The primary concern for bulletproof is to not have a lot of settings that can lead to trouble but still have better performance, better battery life and more features than stock.

flar2 said:
Both have stability as their primary concern. The difference is elemental allows access to all kinds off settings that can lead to instability. The primary concern for bulletproof is to not have a lot of settings that can lead to trouble but still have better performance, better battery life and more features than stock.
Click to expand...
Click to collapse
Nice. Kind of like a no nonsense, flash and ready to go

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
Woke up thismorning to find my phone with a flashing red/green flashing rapidly. Any ideas? On viper 3.2.5
Sent from my HTC One X using Tapatalk 2

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
Kole_Ackerson said:
Woke up thismorning to find my phone with a flashing red/green flashing rapidly. Any ideas? On viper 3.2.5
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Unless you were running this kernel (which I'm pretty sure you weren't) that issue isn't really relavent. What kernel were you running?
Sent from my HTC One X using xda app-developers app

Kole_Ackerson said:
Woke up thismorning to find my phone with a flashing red/green flashing rapidly. Any ideas? On viper 3.2.5
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I don't know what that means, but I can assure you it is not due to this kernel. Please open a thread in Q&A and I'm sure someone knows what that means.
********************************
Please do not report problems here unless you do a full wipe and reinstall and include logs. You better be very certain that your problem is related to the kernel. Almost every problem posted in the elementalx thread is due to overclocking/undervolting, installation problems, or something unrelated to the kernel.
I will have zero tolerance in this thread. It discourages people from trying the kernel if the thread is full of random problems that have nothing to do with the kernel.
When the kernel has a problem, your phone will crash hard. If that happens, you give me /proc/last_kmsg. Otherwise, don't blame the kernel.

Re: [KERNEL] Bulletproof-1.0 | stockish with S2W and extended battery life
Thanks, I'm going to try it.
Sent from my HTC One XL using Tapatalk 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
Cdub50
CPA Poke
Code:
Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[URL="https://github.com/LiquidSmooth/android_kernel_samsung_d2"]Deathly Kernel Source[/URL]
Code:
[url="http://goo.gl/azhHsk"]Main Thread (Download links and explanation)[/URL]
Please Support Liquid by Donating HERE​

Deathly Kernel (Built in!)
*Deathly 1.3 Features*
Updated frequently from kernel.org and CM
CPU Related
CPU Voltage Control
CPU OC/UC
MSM_SLEEPER mod (max screen off frequency)
Will force the cpu cores to be set at 486Mhz to make battery life better.
Fast Charge
CPU Governor's:
Performance
PowerSave
UserSpace
Ondemand
OndemandX
Conservative
Lulzactive
Interactive
InteractiveX
LionHeart
Smartass2
Adaptive
Hyper
Intellidemand
Abyssplug
AbyssplugV2
Smartass
SmartassH3
Wheatley
BadAss
DanceDance
Intelliactive
SmartMax
Nightmare
AssWax
GPU Related
GPU Voltage Control
GPU OC (480Mhz, and 500Mhz steps)
GPU Governor:
Simple
TCP Congestion Control (Info http://goo.gl/GJ73jf )
Veno Set as default instead of cubic
The following were added
Advanced
BIC
HYBLA
HSTCP
ILLINOIS
LP
SCALABLE
VEGAS
RENO
VENO
YEAH
IO's
deadline
row
cfq
bfq (Default)
noop
sio
vr
zen
fifo
fiops
tripndroid
Dynamic F-Sync
This is a goodie by faux123, so all credits go to him for creating this unique feature !
Many kernels just disable synchronous writes to file to speed up system. While this works neatly, it is also dangerous as processes believe that file writes are actually synced to disk (or mmc media in our case) while this is not yet true ! The gain is a noticeably smoother user experience, but the risk of doing so is to have a corrupted filesystem if the device crashes, user pulls battery, battery fully depletes ... so that the device is turned off unexpectedly. To allow for the benefit, but to minimize the risk, faux123 created dynamic fsync, which while the screen is on, will defer file sync temporarily, but when screen gets turned off, a flush is called to synchronize all outstanding writes keeping your data safe.
SLIMBus OverClocked
This means SLIMbus will use its maximum potential to give the best audio quality for the hardware. Takes advantage of both hardware and the mods from zeroinfinity, also opening the door for more things that were previously limited by this. Researched and experimented by ZeroInfinity and Poondog

I can't remember but does this have profiles like cm?
Sent from my SCH-I535 using Tapatalk

o0BlacknesS0o said:
I can't remember but does this have profiles like cm?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
No we do not

deadman96385 said:
No we do not
Click to expand...
Click to collapse
ok...So far everything seems to be running smoothly except a couple things
d2vzw using PA GApps full modular
1. Play Store wont load...It just sits with the spinner going...Ive had it sitting on this screen for 20 minutes...tried clearing data and and reopening but no change
2. Contacts synced but no pictures
3. Some kind of sync error with Calendar
Didnt check much else cuz i needed to restore a backup due to needing to access certain apps that I couldnt download because of the Play Store issues

o0BlacknesS0o said:
ok...So far everything seems to be running smoothly except a couple things
d2vzw using PA GApps full modular
1. Play Store wont load...It just sits with the spinner going...Ive had it sitting on this screen for 20 minutes...tried clearing data and and reopening but no change
2. Contacts synced but no pictures
3. Some kind of sync error with Calendar
Didnt check much else cuz i needed to restore a backup due to needing to access certain apps that I couldnt download because of the Play Store issues
Click to expand...
Click to collapse
Try flashing slim gapps, just to see if it is a pa gapps issue

deadman96385 said:
Try flashing slim gapps, just to see if it is a pa gapps issue
Click to expand...
Click to collapse
OK... Prolly won't be till later tonight but I used the same pa gapps packet with cm11 without the issue
Sent from my SCH-I535 using Tapatalk

Imei issues still or has that been squashed ? Or is the xfat.zip still required?
Currently on 1/21 beta since 1/23 borked data for me.
Sent from my SCH-I535 using XDA Premium 4 mobile app

DrkGhst87 said:
Imei issues still or has that been squashed ? Or is the xfat.zip still required?
Currently on 1/21 beta since 1/23 borked data for me.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
All the data issues have been fixed, exfat.zip is only needed now if you have a sd card formatted in exfat.

although it has improved, still having battery charging animation issues on the circle and dotted

Im still on 1/23 build.. I posted on the 4.3 thread about the weird issue i found last nite. This rom still my fav. Great work team Liquid
Sent from my SCH-I535 using Tapatalk

How's camera on this one? Any glitches with video back to camera or FFC? Getting tired of flashing, I just want camera working. I use it a lot.
Sent from my SCH-I535 using Tapatalk

deadman96385 said:
All the data issues have been fixed, exfat.zip is only needed now if you have a sd card formatted in exfat.
Click to expand...
Click to collapse
It took an extra minute, but I was able to get signal with a clean install of the 1/30 version. All is good
Sent from my KitKat Galaxy S3.

Ok, so here's something weird. I have installed the latest build and PA Gapps, when I install the PA Gapps, then reboot it has uninstalled, messaging, browser, and launcher. I then have to pull the apk's from this zipped liquid ROM and install them manually by placing in the system folders. TiBu won't even reinstall them. Anyone run into this?

I clean installed last night everything looks fine.. No problems found
Sent from my SCH-I535 using Tapatalk

m_s_ifland said:
Ok, so here's something weird. I have installed the latest build and PA Gapps, when I install the PA Gapps, then reboot it has uninstalled, messaging, browser, and launcher. I then have to pull the apk's from this zipped liquid ROM and install them manually by placing in the system folders. TiBu won't even reinstall them. Anyone run into this?
Click to expand...
Click to collapse
PA Gapps stock package removes all AOSP apps such as messaging, browser, launcher and keyboard and replaces them with the Google versions, i.e. Hangouts, Chrome, etc..
If you want the aosp versions then you will want the full modular package
Sent from my SCH-I535 using Tapatalk

When on the charger, my screen flickers between the home and lock screen, rendering the phone useless. Any one else? Any ideas?
Sent from my KitKat Galaxy S3.

Phone would not install apps from market at first. The phone rebooted a couple times today on its own, afterwards that apps installed. Other than that no problems here. Did a clean install with Full Modular. Great ROM!

johnnytraveler said:
When on the charger, my screen flickers between the home and lock screen, rendering the phone useless. Any one else? Any ideas?
Sent from my KitKat Galaxy S3.
Click to expand...
Click to collapse
Having the same issue. Just need to keep it on the stock battery icon until the fix.. hopefully in the next build.

johnnytraveler said:
When on the charger, my screen flickers between the home and lock screen, rendering the phone useless. Any one else? Any ideas?
Sent from my KitKat Galaxy S3.
Click to expand...
Click to collapse
Thats dew to the battery animation.. Disable that and should work fine..
Sent from my SCH-I535 using Tapatalk
---------- Post added at 04:49 AM ---------- Previous post was at 04:48 AM ----------
Sent from my SCH-I535 using Tapatalk

Discussion Thread and Other Info for Frosted Kernel
Main Development Thread for Ville is Here: http://forum.xda-developers.com/htc-one-s/development/kernel-frosted-kernel-javelinanddart-t3031529/
Main Development Thread for Evita is Here: http://forum.xda-developers.com/one-x-att/development/kernel-frosted-kernel-javelinan-t3039320
Main Development for M4 is Here: http://forum.xda-developers.com/htc...kernel-frosted-kernel-javelinanddart-t3045541
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. :P
* blah blah blah you get the point.
*/
Sample Voltage Tables:
My Voltage Table:
This thread is to keep my development thread a little cleaner.
Enjoy and Happy Flashing!
Credits and Thanks:
Will Update Later

Bricked Edition​
What is Bricked Edition?
Bricked Edition is the version of Frosted Kernel with @show-p1984's MSM_MPDECISION and MSM_THERMAL
What is the focus of Bricked Edition?
Speed and Stability as well as decent battery life and no overheating.
Why would I choose Bricked Edition?
If you prefer @show-p1984's MSM_MPDECISION and MSM_THERMAL over @faux123's Intelli_Plug and Intelli_Thermal
Sample Configurations:
My Configuration:

Intelli Edition​
What is Intelli Edition?
Intelli Edition is the version of Frosted Kernel with @faux123's Intelli_Plug and Intelli_Thermal
What is the focus of Intelli Edition?
Speed and Stability as well as good battery life and no overheating.
Why would I choose Intelli Edition?
If you prefer @faux123's Intelli_Plug and Intelli_Thermal and you want better battery life.
Sample Configurations:
My Configuration:

Void Edition​
What is Void Edition?
Void Edition is Bricked Edition with more features and hopefully better performance
What is the focus of Void Edition?
Speed, Stability, Battery Life, and Customizability
Why would I choose Void Edition?
If you prefer @show-p1984's MSM_MPDECISION and MSM_THERMAL over @faux123's Intelli_Plug and Intelli_Thermal and if you love tweaking your phone a lot

Pros and Cons of the Editions​Bricked Edition:
Pros:
Fast
Stable
Lots of Tweaks for MSM_MPDEC and MSM_THERMAL
Good Battery Life (with badass governor)
Cons:
Actually none that I can think of
Intelli Edition:
Pros:
Quick
Stable
Kinda shortchanged on tweakability
Good Battery life
Cons:
Lags a lot depending on the governor
Void Edition:
Bricked Edition + More Features + More Speed
Pros:
All of Bricked Editions
Lots of Tweaks and Speed
Cons:
None that I can think of actually

FAQ​Q: What is MSM_THERMAL?
A: Kernel based 3-phase thermal control!
This replaces your /system/bin/thermald binary which is renamed by the installer to thermald_bck.
It will throttle your cpu speed to keep it cool and unleash it if the cpu has cooled down enough. (3 phases: low, mid and high)
Check /sys/kernel/msm_thermal/conf/ for the thermal configuration
Q: What is MSM_MPDECISION
A: 100% kernel based multi core decision! (should cpu1 be online or not?)
This replaces your /system/bin/mpdecision binary which is renamed by the installer to mpdecision_bck.
Check /sys/kernel/msm_mpdecision/conf/ for the configuration.
Q: What is MSM_MPDECISION Input Boost?
A: This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value (look below) on every online cpu. This boosts overall reaction times and smoothness a lot.
Q: What is Sweep2Wake?
A: You "Sweep" your fingers across the capacitive buttons to the right in order to wake the screen up
Q: What is Sweep2Sleep?
A: Sweep2Wake but sweeping to the left to turn the screen off
Q: What is DoubleTap2Wake?
A: You double tap one of the capacitive buttons (set which one in trickstermod) to wake it up
Q: What is DoubleTap2Sleep?
A: DoubleTap2Wake except it turns the screen off
Q: What is Pocket Detection?
A: It tries to detect if your phone is in a pocket. If it is, the aforementioned wake control will be disabled
Q: What is -O3 Optimization?
A: It's a GCC Optimization that compiles faster, more optimized code
Q: What are TCP Congestion Control Algorithms?
A: http://en.wikipedia.org/wiki/TCP_congestion-avoidance_algorithm
Q: What is a CPU Governor?
A: It decides how the CPU should be used
Q: What is a GPU Governor?
A: Same thing as CPU Governor but for GPUs
Q: What is an I/O Scheduler?
A: Like a CPU Governor for Input Output (file system) Events
Q: What is Fast Charge?
A: If enabled, It forces your phone to detect a USB Port as an Outlet to Speed Up Charging (depends on the output capacity of the USB Port
Q: What is FRANDOM?
A: A fast pseudo-random number generator

Nice one...Glad to see that Bubba is not dead and it's features survived (even if with another name). Thank you all involved in this project and maybe we will see a Lollipop kernel too

Rapier said:
Nice one...Glad to see that Bubba is not dead and it's features survived (even if with another name). Thank you all involved in this project and maybe we will see a Lollipop kernel too
Click to expand...
Click to collapse
+1... Very thanks javelinanddart
And we will see a Lollipop kernel too???

Winstarshl said:
+1... Very thanks javelinanddart
And we will see a Lollipop kernel too???
Click to expand...
Click to collapse
@Rapier
Possibly, its in my rainl branch but idk if it's functional, i'll try compiling it later
and I have to have some kind of originality
i added frandom support and 4 more io schedulers and OC up to 2.1 and im compiling that right now

javelinanddart said:
@Rapier
Possibly, its in my rainl branch but idk if it's functional, i'll try compiling it later
and I have to have some kind of originality
i added frandom support and 4 more io schedulers and OC up to 2.1 and im compiling that right now
Click to expand...
Click to collapse
For 4.4 or for 5.0 cause I didn't understood right. Right now I cannot test this kernel since I'm on CM12 Lollipop but I'll test it on Candy and LiquidSmooth probably tomorrow or this night

Rapier said:
For 4.4 or for 5.0 cause I didn't understood right. Right now I cannot test this kernel since I'm on CM12 Lollipop but I'll test it on Candy and LiquidSmooth probably tomorrow or this night
Click to expand...
Click to collapse
for 4.4
we have cm12 already??? where?!?!

javelinanddart said:
for 4.4
we have cm12 already??? where?!?!
Click to expand...
Click to collapse
:laugh: http://forum.xda-developers.com/htc-one-s/development/rom-cyanogenmod-12-lollipop-htc-one-s-t2946468 you not see??? this post?

javelinanddart said:
for 4.4
we have cm12 already??? where?!?!
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?t=2946468
Sent from nowhere over the air...

Winstarshl said:
:laugh: http://forum.xda-developers.com/htc-one-s/development/rom-cyanogenmod-12-lollipop-htc-one-s-t2946468 you not see??? this post?
Click to expand...
Click to collapse
Yeah i just saw it and I think I'm going to stick with 4.4 (CM11) but I'll work on development for CM12 and you and @Rapier can test it when im done working on it

javelinanddart said:
Yeah i just saw it and I think I'm going to stick with 4.4 (CM11) but I'll work on development for CM12 and you and @Rapier can test it when im done working on it
Click to expand...
Click to collapse
Of course
Sent from nowhere over the air...

javelinanddart said:
Yeah i just saw it and I think I'm going to stick with 4.4 (CM11) but I'll work on development for CM12 and you and @Rapier can test it when im done working on it
Click to expand...
Click to collapse
Yes of course, I'm only for it, if need any tests, write)
And now i test this kernel on cm 4.4)

@Rapier @Winstarshl
New version out for 4.4, check the AFH or the downloads tab
added 2.1GHz and 4 new i/o schedulers (fifo, vr, zen, and tripndroid)!!
Going to work on Lollipop now, wish me luck!

javelinanddart said:
@Rapier @Winstarshl
New version out for 4.4, check the AFH or the downloads tab
added 2.1GHz and 4 new i/o schedulers (fifo, vr, zen, and tripndroid)!!
Going to work on Lollipop now, wish me luck!
Click to expand...
Click to collapse
Okey no test new ver. 4.4...
Goooooog luck for dev to Lollipop)))
and yet, I'm a little advertised on your core on 4pda)
________
UPD: Ohhh this is the first kernel on which I have earned FauxSound - nice, very nice) Very thanks fotr this too)
UPD2: Now tested last version ... and set interactive with VR; .......until all wonderfully)

Winstarshl said:
Okey no test new ver. 4.4...
Goooooog luck for dev to Lollipop)))
and yet, I'm a little advertised on your core on 4pda)
________
UPD: Ohhh this is the first kernel on which I have earned FauxSound - nice, very nice) Very thanks fotr this too)
UPD2: Now tested last version ... and set interactive with VR; .......until all wonderfully)
Click to expand...
Click to collapse
@rmbq added Faux Sound I added VR...
OC past 1809 is completely unstable, so I'll disable that

javelinanddart said:
@rmbq added Faux Sound I added VR...
OC past 1809 is completely unstable, so I'll disable that
Click to expand...
Click to collapse
Ohhh this is very nice rezult) Seed)
1809 and VR))) Very good)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}