Hey there,
i've searched a lot for it, but can't find a solution, so here is the problem:
i bought a minix x5 mini (rockchip 3066). last week, minix released the 4.2.2. FW but it did not resolve the problem that the system does not mount a 2TB external HDD, connected straight to one of the two integrated USB ports.
i read that the minix must be rooted to use stickmount (i.e.) and then i can mount the hdd from the /mnt/ directory. is that correct or is there a way to get it on without rooting the x5 mini?
thanks fr your help!
Will the MINIX mount a USB flash drive?
Sent from my Nexus 7 using Tapatalk 4
Related
Hello all,
I am not sure if i connect a 500 gb usb external hard disk to my xoom through micro usb otg cable. Can anyone answer this? IF positive, I will buy a 500 gb instantly.
That depends.
I am running Tiamat manta ray 2.0.1 on UK MZ601 3g xoom and I can mount an external WD usb powered 500Gb drive over otg with no problems.For stock 3.01which I came from it didn't work.
I use usb otg watcher (available in market place) to mount and es filemanager to move, and copy and browse etc
Regards,
wendell7 said:
That depends.
I am running Tiamat manta ray 2.0.1 on UK MZ601 3g xoom and I can mount an external WD usb powered 500Gb drive over otg with no problems.For stock 3.01which I came from it didn't work.
I use usb otg watcher (available in market place) to mount and es filemanager to move, and copy and browse etc
Regards,
Click to expand...
Click to collapse
I have a new WD Passport Essential 750GB HDD that works fine with the Moto OTG adaptor and the USB Mass storage Watcher OTG app. My Xoom's configuration is in my sig.
okantomi said:
I have a new WD Passport Essential 750GB HDD that works fine with the Moto OTG adaptor and the USB Mass storage Watcher OTG app. My Xoom's configuration is in my sig.
Click to expand...
Click to collapse
If i use stock 3.2 rom would it be possible then to use?
raihankabir_1 said:
If i use stock 3.2 rom would it be possible then to use?
Click to expand...
Click to collapse
You could try but that app I mentioned requires root and I'm not sure if stock 3.2 provides usb host mode support.
I'm still on Tiamat 1.0 and can read my WD 1TB HDD (NTFS) without issue.
I'm still in stock 3.0.1 uk and I can use my 500, 750 and 1T WD passports fine by mounting through terminal emulator.
Sent from my HTC Desire using Tapatalk
Hi to all!
Here's the problem that I have.
After upgrading my Xoom (US 3G) to Tiamat 2.1 Hammerhead USBOTG stopped to work. When I try to connect flashdrive via this cable it blinks only once and that's all. The folder USBOtg is empty -> nothing is shown (but I know that there are files). I tried to format flashdrive to various filesystems (NTFS, FAT32) -> no result.
Another strange thing after upgrade is with MicroSD folder. It shows me only old data. All new one that I copied to it via PC it doesn't show at all. AND!!! PC doesn't see the content of folder with name "external" on Xoom but when I copy there files from PC then Xoom can see them.
May anyone advice any steps to return usbotg and microsd in normal working state?
I tried to re-flash Xoom with previous various versions of firmwares (mods) -> the same situation.
BR, akadimka
akadimka said:
Hi to all!
Here's the problem that I have.
After upgrading my Xoom (US 3G) to Tiamat 2.1 Hammerhead USBOTG stopped to work. When I try to connect flashdrive via this cable it blinks only once and that's all. The folder USBOtg is empty -> nothing is shown (but I know that there are files). I tried to format flashdrive to various filesystems (NTFS, FAT32) -> no result.
Another strange thing after upgrade is with MicroSD folder. It shows me only old data. All new one that I copied to it via PC it doesn't show at all. AND!!! PC doesn't see the content of folder with name "external" on Xoom but when I copy there files from PC then Xoom can see them.
May anyone advice any steps to return usbotg and microsd in normal working state?
I tried to re-flash Xoom with previous various versions of firmwares (mods) -> the same situation.
BR, akadimka
Click to expand...
Click to collapse
Two different issues--if you read the release notes with the Hammerhead Rom, Team Tiamat removed the USB Mass Storage enabling that had been in earlier Rom, due to various difficulties. So that means you can no longer use your PC to copy files into the micro sd card in the Xoom, but you can cop files directly to the sdcard using an adapter or card reader. Your Xoom should still have access to the files on your micro sd card at mnt/external1.
The usbOTG works fine for me but it needs the help of an app like USB Mass Storage Watcher OTG or Drive Mount. Both will work. It also helps to reboot with the drive plugged in the first time if you are having a hard time getting the Xoom to recognize it.
Thanx! Drive Mount helped me with recognizing and mounting flash drive (but only after Xoom reboot with drive plugged in). USB Storage Watcher OTG crashes everytime when I start it with drive connected -> with disconnected it starts normally but won't see any after-connected drives. Ssems that I'll use Drive Mount program
As for MicroSD -> even connected directly to PC and copied some files to it Xoom still sees only old data. Any ideas?
BR, Dmitry
Sent from my Xoom using XDA Premium App
akadimka said:
Thanx! Drive Mount helped me with recognizing and mounting flash drive (but only after Xoom reboot with drive plugged in). USB Storage Watcher OTG crashes everytime when I start it with drive connected -> with disconnected it starts normally but won't see any after-connected drives. Ssems that I'll use Drive Mount program
As for MicroSD -> even connected directly to PC and copied some files to it Xoom still sees only old data. Any ideas?
BR, Dmitry
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
Actually, try checking the folder mnt/external1 (1) as this is HC3.2's official mount point. The Microsd mount point is an artifact of an older Rom.
i am using hammerhead rom with tachi kernel.
yup the usb otg not working.
tried both usb watcher and drive mount.
rohit3192 said:
i am using hammerhead rom with tachi kernel.
yup the usb otg not working.
tried both usb watcher and drive mount.
Click to expand...
Click to collapse
Make sure that you are using a REAL usbOTG cable.
A real USB otg cable? What needs to be special about the cable in order for it to work?
Sent from my Nexus One using xda premium
msavic6 said:
A real USB otg cable? What needs to be special about the cable in order for it to work?
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
This is where I will suggest that you do some research. Start with this forum and then search elsewhere. Just today I have answered this question 3 times. Search on my name and you will see my posts with your answer.
i am using micro usb male to normal usb female.
cable is gold plated and branded.
but others have also mentioned that usbotg not working after they updated to 3.2
though i never tested on 3.1
rohit3192 said:
i am using micro usb male to normal usb female.
cable is gold plated and branded.
but others have also mentioned that usbotg not working after they updated to 3.2
though i never tested on 3.1
Click to expand...
Click to collapse
Your cable will never work because it is not OTG. OTG has a different pin configuration to allow the Xoom to function in usb host mode. If you are handy with a soldering iron you could make one, but why not buy one, they are availble. Here is my Google search for USBOTG Xoom to get you started: http://www.google.com/search?hl=en&source=hp&q=usb+otg+xoom&aq=2s&aqi=g1g-s9&aql=&oq=usbOTG
Hi Guys - After an unsuccessful attempt to find a solution to connect one andoid to another through USB, I am posting this thread hoping to find a solution from the XDA gods
Problem:- I have a Xperia x10 (Rooted Android) and a Transfomer (Unrooted Android), now when I connect my Xperia to the tab, the Xperia recognises the connection and prompts to mount the SD card. After mounthing the card, I am unable to browse the contents of the phone card in my tab. Actually the tab fails to recognise the phone card as external memory card.
Is there any application that will enable Android to Android file sharing through USB?
Thanks In Advance
Mount it manually in Settings>Storage>Mount USBDisk x.
It does not mount automatically.
If that does not work, try Multi-Mount SD on your Xperia.
If still won't work, it will be a ROM related problem on your phone.
Mine works fine - HTC Desire Root/S-OFF on MIUI XJ - unrooted TF
Sorry for my Strange English
I bought a otg usb for my nexus 5
I am using 32GB Model. However I am really hard user so I bought 32gb otg usb.
I formatted it(ExFat, 32KB)
I disappointed with the speed.
So I installed ElementalX 0.29-cm
and formatted my usb again(NTFS, 2048B)
Is it fine?(Please see the screenshot file attachment)
ntmaring said:
Sorry for my Strange English
I bought a otg usb for my nexus 5
I am using 32GB Model. However I am really hard user so I bought 32gb otg usb.
I formatted it(ExFat, 32KB)
I disappointed with the speed.
So I installed ElementalX 0.29-cm
and formatted my usb again(NTFS, 2048B)
Is it fine?(Please see the screenshot file attachment)
Click to expand...
Click to collapse
ExFat has given some problems to some people. If you like moving big files, stay on NTFS. 48.7MB/s is not bad.
FAT32 also works.
I bought a dual USB disk for Nexus 4 , the one like sony has released recently, my Nexus 4 doesn't detect it, I tried flashing a custom kernel with a OTG support but no luck. Any idea how can i make the USB work ?? The USB does have a micro-usb connector ..Any reply will be really helpful
Abhiheart said:
I bought a dual USB disk for Nexus 4 , the one like sony has released recently, my Nexus 4 doesn't detect it, I tried flashing a custom kernel with a OTG support but no luck. Any idea how can i make the USB work ?? The USB does have a micro-usb connector ..Any reply will be really helpful
Click to expand...
Click to collapse
nexus 4 does not support usb otg. the only way is to have a custom rom with usb otg AND have a Y micro usb cable to give power to the disc.
in other words nexus only supports external powered usb otg.
http://forum.xda-developers.com/nexus-4/development/kernel-patch-hells-core-kernel-otg-t2586524
this a list of compatible kernels. somewhere in the forums there is a thread for this if i remember that so search and you will find it.