Stylus skips on screen - Asus Transformer TF700

Hey all,
i have an Asus transformer, but i actually need help with my other tablet. I just bought an Insignia Flex 10.1 android tablet from Best buy. It seems to work great with my finger. However, when i use my stylus it doesnt detect it very well. When drawing or writing, it "skips" on the screen. Can someone help me with this? Maybe theres a certain stylus i need.
Thanks!

My GT2 does the same thing. It's because the screen sensitivity is significantly lower than on the Transformer. Changing stylus will probably not make any difference.

Oh that would suck. I was thinking of trying one of these:
http://www.amazon.com/Musemee-Notie...=1376404811&sr=8-4&keywords=fine+point+stylus

Related

[Q] Can I use parts from other tablets on my transformer?

I posted once before asking where to get a touch screen replacement. Since I have discovered no one in the world has one, now I would like to know is the screen part interchangeable. I am thinking that I could use the screen from the galaxy tab 10.1 because the screens look very similar. Has anyone tried this? Is it even possible?
You're gonna crack open one tablet to possibly fix another tablet?
asdfuogh said:
You're gonna crack open one tablet to possibly fix another tablet?
Click to expand...
Click to collapse
I'm going to buy the part. I wouldn't cannibalize a perfectly good tablet that's just wrong.
The parts would not likely be compatible, even if the two tablets were using the exact same screen technology and the same screen size. Every tablet has a different placement on the ribbon cables, batteries, daughter boards, speakers, etc., which all has an effect on how the screen, buttons, and bezel will all fit together on top. You have to use identical devices in order to be able to swap parts.
Haha, just had to make sure.. You know, in case you were that crazy about your asus.

[Q] Capacitive Stylus

Hey!
I really hope that this haven´t been asked already...I haven´t found an answer yet. Tell me, is there any possibility to get a digitizer working on this touchpad? I do not have any knowledge about the technical requirements for these active pens...
Y dont you just get a ipad pen type of pen?
greenlant said:
Hey!
I really hope that this haven´t been asked already...I haven´t found an answer yet. Tell me, is there any possibility to get a digitizer working on this touchpad? I do not have any knowledge about the technical requirements for these active pens...
Click to expand...
Click to collapse
Do you mean a capacitive stylus? The screen is capacitive so only a capacitive stylus will work. Just check out ebay. Any stylus that works with an ipad, transformer, or iconia will work on the touchpad.
If you are thinking of something more like a Wacom tablet type 'active' digitizer, then no, they cannot work with a standard (capacitive only) device. They operate using a radio frequency system which has to be present both on the pen and on the tablet itself.
The bonus is improved accuracy and sensitivity for the device, the drawback being cost, a *screenless* wacom tablet using that technology is already a hundred dollars or more, and to combine it with a screen wacom charges a thousand dollars handily.
HTC has a compromise of a sort with the flyer tablet, but again thats a two part system, part of it is in the pen and part is engineered into the tablet itself.
Thats´what I meant (an active digitizer)...okay, thank you all for your help!!! In this case I have to find out, if such a capacitive pen runs well, but I´ve heard that the are not that good...
Thanks!

[A510] Adonit Jot unresponsive

Has anyone else tried using the Jot stylus on their Acer? Mine has a really hard time picking up this stylus. The Jot worked great on my previous Toshiba Thrive and other tablets I have tried it on. But for some reason it just will not work on the A510. Is this a software problem or a hardware defect? I have tried toggling the touchscreen sensitivity but it appears to have no affect on the screen sensitivity.
Any ideas?
xamindar said:
Has anyone else tried using the Jot stylus on their Acer? Mine has a really hard time picking up this stylus. The Jot worked great on my previous Toshiba Thrive and other tablets I have tried it on. But for some reason it just will not work on the A510. Is this a software problem or a hardware defect? I have tried toggling the touchscreen sensitivity but it appears to have no affect on the screen sensitivity.
Any ideas?
Click to expand...
Click to collapse
hi I assume you have a screen protector? I have the exact same issue, in fact the screen is so insensitive that I can't even type properly ..
but if I'm holding it I my hands it seems much better.
anyone else with this problem?
same here, pretty much useless. want to buy mine???
JJackJi said:
hi I assume you have a screen protector? I have the exact same issue, in fact the screen is so insensitive that I can't even type properly ..
but if I'm holding it I my hands it seems much better.
anyone else with this problem?
Click to expand...
Click to collapse
Nope, no screen protector yet. But it still doesn't work.

[SOLVED][Q] Any suggestions for wavy lines when drawing?

I have the Galaxy Tab 2 7.0, rooted with 4.0.4, and have not had any problems with it for the most part.
I recently downloaded Sketchbook Express to see how well the tablet could handle drawing. It handles it very well with one exception: the closer you get to drawing at a 45* angle, the more wavy the lines get. If I quickly swipe in that direction, it straightens out, but the slower I go, the more pronounced the waves or zig zags get. This happens using any of my fingers, the $20 Rocketfish stylus, and the $30 Wacom Bamboo stylus. All attempted on a freshly cleaned screen. I've also tried different apps with the same result. This guy had the same issue, as have others from what research I could pull up, but outside of unhelpful answers of "it's your stylus" (it's not), they all seem to have given up on getting help.
I've tried these apps on my friend's Evo 4G 3D, running Android 4.0.3, and had the same issue. I then tried on my rooted Xperia Play running Android 2.3.3 Gingerbread, and did not have this issue. I'm not entirely convinced it's an OS version that's making the difference, but I'm not able to find much information about the screens these devices use outside of "capacitive touch". I did learn that these screens use the corners to determine the location of input being received, so maybe moving directly in the direction of a corner is causing it to mess up?
Long story short, my questions are thus: is there any way to fix, calibrate, or compensate for this issue? Is it the screen, a hardware issue, or something else? Is there anything I can do?
Thanks for your time.
pWEN said:
I have the Galaxy Tab 2 7.0, rooted with 4.0.4, and have not had any problems with it for the most part.
I recently downloaded Sketchbook Express to see how well the tablet could handle drawing. It handles it very well with one exception: the closer you get to drawing at a 45* angle, the more wavy the lines get. If I quickly swipe in that direction, it straightens out, but the slower I go, the more pronounced the waves or zig zags get. This happens using any of my fingers, the $20 Rocketfish stylus, and the $30 Wacom Bamboo stylus. All attempted on a freshly cleaned screen. I've also tried different apps with the same result. This guy had the same issue, as have others from what research I could pull up, but outside of unhelpful answers of "it's your stylus" (it's not), they all seem to have given up on getting help.
I've tried these apps on my friend's Evo 4G 3D, running Android 4.0.3, and had the same issue. I then tried on my rooted Xperia Play running Android 2.3.3 Gingerbread, and did not have this issue. I'm not entirely convinced it's an OS version that's making the difference, but I'm not able to find much information about the screens these devices use outside of "capacitive touch". I did learn that these screens use the corners to determine the location of input being received, so maybe moving directly in the direction of a corner is causing it to mess up?
Long story short, my questions are thus: is there any way to fix, calibrate, or compensate for this issue? Is it the screen, a hardware issue, or something else? Is there anything I can do?
Thanks for your time.
Click to expand...
Click to collapse
The problem is the digitizer. It's cheap. I think all of the g tabs have this issue. Mine is terrible drawing diagonal lines and even scrolling in landscape mode is choppy. Only way around it from what I can tell is to apply more finger surface area. That seems to fix it. But since you're using a stylus that's not possible. If you find a solution to calibrate the digitizer, please let me know!
I have the same exact problem and the same exact request. There must be some option to increase sensitivity to at least minimize this effect. It's the only flaw I can find on this otherwise wonderful device.
And honestly, for the prize it cost, I would expect this not to exist. But... I have it now and would like to be able to use it in it's full extent and power.
dammit
Nice to know I'm not the only one who notice that, but it's crazy how my finger seems preciser than my pen and even more, that in my Galaxy S the pen works perfectly. I was so happy to use some drawing apps on the tab but when I tried...
I tried in my Tab 7 2, then I'll try on my uncle's 10.1 just to check.
hello all,
just to report the same issue. i have same problem with my samsung galaxy tab 2 7" like you all here. i get this problem since the first time i bought it (about a month ago). drawing the lines and reading in landscape mode is choppy :crying: same as MrHyde03 said. i have been tested my cousin's tablet to draw diagonal line for comparison, he has galaxy tab p1000. and the line result i get, though his tab has wavy line too, but mine has more wavy line than his tablet. i didn't noticed his tablet has so wavy line, just a little. i did it with my finger.
i hope this issue can be fixed later.
could be a solution
I don't know if it's just for marketing or what, but maybe the original Samsung stylus is better for these screens.
I wish someone could certify this...
I bave The Same Problem... Vawy diagonal and arcs. The same pens and fingers works fine on my Asus TF 101...
I have the same problem
gonzogonzo said:
I bave The Same Problem... Vawy diagonal and arcs. The same pens and fingers works fine on my Asus TF 101...
Click to expand...
Click to collapse
Hi guys, I have the same problem. Horrible response when i draw with a (cheap) stylus and perfect when i do it with my fingers. Has anyone tried adonit jot pro or Dagi ??? Maybe they increase the contact area and it solves the problem. If so, please tell us!!!
Thanks for reading and waiting for a solution.
I know this is an old post, but I can't just abandon my own thread! I've done quite a bit of research on this since making this post, and sadly, it's the way the screen is. Strange that my Xperia Play and Galaxy S3 phones can do this, but the Tab 2 was given such a cheap screen. I ended up selling it and putting the money towards a Note 10.1 with S-pen, which works as I would expect it to.

[Q] Surface pen on laptop?

Is this even possible? The bluetooth on the acer w/touchscreen seems to connect just fine with the surface pro 3 pen, but then it does absolutely nothing. Doesn't click, doesn't track buttons do nothing.
I had hopes this might be possible, I just hope it isn't proprietary and there would be some sort of stylus for the touchscreen
Nice idea.. never tried it btw.. i kinda don't think its possible

Categories

Resources