Database Info

usbOTG on 3.2.2

I'm running the latest HC 3.2.2 due to having my LTE modem upgraded. It is rooted and I've tried using Drive Mount and USB Watcher to get my HDD recognized through usbOTG. It seemed to work fine before but now I can't get it to work.
A few times I've been able to see the HDD in one of the two mounting programs but then it disappears. The HDD turns off (the lights go off) after 20-30 seconds once it's recognized.
Has anybody on 3.2.2 been able to get their usbOTG to recognize? My SD card currently points to External1. Could that be an issue?

911junkie said:
I'm running the latest HC 3.2.2 due to having my LTE modem upgraded. It is rooted and I've tried using Drive Mount and USB Watcher to get my HDD recognized through usbOTG. It seemed to work fine before but now I can't get it to work.
A few times I've been able to see the HDD in one of the two mounting programs but then it disappears. The HDD turns off (the lights go off) after 20-30 seconds once it's recognized.
Has anybody on 3.2.2 been able to get their usbOTG to recognize? My SD card currently points to External1. Could that be an issue?
Click to expand...
Click to collapse
the micro sdcard should be at mnt/external1. That is correct. I suggest you flash the Tiamat Odachi kernel 2.2.0 on your rooted 4G Xoom. That should return any OTG functionality you may have lost. This kernel is the only one I know of that was expressly made for and known to be working well on the 4G Xoom. Team Rogue may have also been working on a 4G kernel. Just don't try to flash any custom ROMs until ICS is ported.

Well I tried with latest TIAMAT kernel as well as ROGUE kernel and both give me the same result. Neither drivemount nor usb watcher otg seems to recognize the HDD.
I appreciate the help. Just can't seem to figure out why it's not working. It worked great on Tiamat rom.

911junkie said:
Well I tried with latest TIAMAT kernel as well as ROGUE kernel and both give me the same result. Neither drivemount nor usb watcher otg seems to recognize the HDD.
I appreciate the help. Just can't seem to figure out why it's not working. It worked great on Tiamat rom.
Click to expand...
Click to collapse
Well, I have wifi only and you can see my configuration in my signature line, but on the Odachi kernel I just mounted my 750GB Passport HDD. I used USB Mass Storage Watcher. Works like a charm. I think the newest kernel install overwrites the kernel in the ROM and the kernel controls this hardware stuff, right?

Hello everyone, happy Thanksgiving. How can I use this feature on my Xoom without rooting it? Can someone help me please.
P.S. I have not purchased the OTG cable yet. I need more info before buying one.
Thank you.

Can someone help me please. Thanks.

Cato22 said:
Hello everyone, happy Thanksgiving. How can I use this feature on my Xoom without rooting it? Can someone help me please.
P.S. I have not purchased the OTG cable yet. I need more info before buying one.
Thank you.
Click to expand...
Click to collapse
Unfortunately, the usb host mode is only available for a rooted Xoom with a custom kernel that gives this functionality. Otherwise the microusb port is only for connecting to your pc.
Why not root?

okantomi said:
Unfortunately, the usb host mode is only available for a rooted Xoom with a custom kernel that gives this functionality. Otherwise the microusb port is only for connecting to your pc.
Why not root?
Click to expand...
Click to collapse
Because I don't know from where to start rooting.

I find that even with root and either Katana or Odachi I cannot get usbOTG to work with a portable HDD. I'm on 3.2.2.

911junkie said:
I find that even with root and either Katana or Odachi I cannot get usbOTG to work with a portable HDD. I'm on 3.2.2.
Click to expand...
Click to collapse
Is your HDD a newer one? I have a 1st generation Passport that needs a powered hub to run it Xoom doesn't have enough power, but my newer, bigger Passport works just dandy.
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
Cato22 said:
Because I don't know from where to start rooting.
Click to expand...
Click to collapse
Try this guide: http://forum.xda-developers.com/showthread.php?t=1249798
It should help. There's a modified adb setup link that has you only download just what you need for root...but the guide really walks you through everything.

I had it working on an earlier Tiamat build and kernel. But since the 4G update it's been a no go.

911junkie said:
I had it working on an earlier Tiamat build and kernel. But since the 4G update it's been a no go.
Click to expand...
Click to collapse
That's strange... what could have caused that?

[How to] UN-ROOT Galaxy Tab 2 10.1 [GT-P5113 / 5100 / 5110]

This Root Remover has been tested with the Samsung Galaxy Tab2 10.1, Model GT-P5113.
REQUIREMENT: You must have root using the procedure at [How To] ROOT Galaxy Tab 2 10.1 [GT-P5113 / 5100 / 5110]
• After you download this file, move it the root of your external SD card( /mnt/extSdCard ). This is the micro sdcard you insert in tablet slot. Your /mnt/sdcard folder is internal memory (not recognized in CWM recovery).
• Reboot into CWM (recovery) using Quick Boot app or
• Power OFF your tablet, disconnect from computer and restart in recovery (CWM) by pushing and holding POWER & Volume DOWN/LEFT buttons at same time. When Samsung Tab 2 10.1 logo appears, you can release power button but continue holding volume button for a few more seconds. Note: If you've done this on other Samsung devices, you will notice that it takes longer before blue CWM v5.5.0.4 text appears ... just be patient.
• Once you are in recovery, use volume button (UP/DOWN/LEFT OR RIGHT) to move around andPOWER button to select an option.
Select install zip from sdcard. Choose Root_Remover file you already copied to root of sdcard.
When unrooting is finished, choose reboot system now from CWM menu.
By downloading this file you understand and agree that you bear all responsibility for the use and anything it may do to your tablet.
DOWNLOAD
Root_Remover.zip
Unrooting does NOT reset the download counter (developers are still working on that).
As soon as I or another developer figure out how to reset the counter on this device,
I will post information HERE.
Keep in mind that at least three Tab2 10.1 variations exist around the world.
BE PATIENT. As with prior Androids, a solution will come.
Enjoy,
Glenn

Reserved for notes & feedback
Reserved for OP notes & feedback

Thanks welton!
I still haven't taken the dive in rooting this tablet yet (its my mom's and I want to make sure that if/when something breaks we can return it under warranty). This gets me 1 step closer though. Once we can figure out the download counter then I'm 100% in!

Yes, it would be great if the counter could be resetted. On the Samsung Galaxy S2 there is only a little USB stick, which have to be putted into the power slot on the phone. Then the phone boots and the counter will be resetted... Why there is no such a trick on the Tab?

Counter reset device
Patschi_ said:
Yes, it would be great if the counter could be resetted. On the Samsung Galaxy S2 there is only a little USB stick, which have to be putted into the power slot on the phone. Then the phone boots and the counter will be resetted... Why there is no such a trick on the Tab?
Click to expand...
Click to collapse
Yes, would be nice if it were that easy. I have the USB jig for my SGS2 smartphone. If I can get an adapter from the SGS2 microUSB male plug to the Tab2 connnector plug, I intend to try it on my tablet.
If ANYBODY knows where i can purchase an adapter with a female microUSB port that converts it to standard USB 2.0, PLEASE post or PM me so i can try my SGS2 reset jig with my GT-P5113 to see if it will reset the download counter to zero. Thanks!
For the record, I tried using Cheatman's Triangle Away app Versions 1.1, 1.25 and 1.51 but with no success.
Glenn

Thanks for your work!

weltwon said:
If ANYBODY knows where i can purchase an adapter with a female microUSB port that converts it to standard USB 2.0, PLEASE post or PM me so i can try my SGS2 reset jig with my GT-P5113 to see if it will reset the download counter to zero. Thanks!
Click to expand...
Click to collapse
Well I did some searching and the closest thing I can find is a Micro to Mini adapter on Ebay Here or Here. You'd then have to get a Mini to USB adapater... It would be a pain but it just doesn't look like they make a mini that converts to a full-fledged USB.
-- Zeustopher

Making a USB jig or finding stock bootloader
Zeustopher said:
Well I did some searching and the closest thing I can find is a Micro to Mini adapter on Ebay Here or Here. You'd then have to get a Mini to USB adapater... It would be a pain but it just doesn't look like they make a mini that converts to a full-fledged USB.
-- Zeustopher
Click to expand...
Click to collapse
Thanks. I found the same. If I can verify the pin designations for the tab2 10.1 as being similar to my SGS2 phone, I will try jumping the USB2.0 end of my tab2 cable with a resisitor to see if that works.
Plan B: If I can find a stock bootloader.bin file for GT-P5113 tablet, I can try resetting the download counter using ODIN to flash that file. I already tried installing the GT-P5110 bootloader via ODIN, and it would not connect or flash. As life has taught me many times "Quitters never win & winners never quit" so I am determined to find a solution!
Glenn

Important of counter reset
Sorry for the noob question, but what will happen if we can not reset the counter to 0 i see so many people are talking abt it how important is this "counter reset" stuff?
edit: This is my first samsung device so i don´t know much abt it, am still learning.
weltwon said:
Thanks. I found the same. If I can verify the pin designations for the tab2 10.1 as being similar to my SGS2 phone, I will try jumping the USB2.0 end of my tab2 cable with a resisitor to see if that works.
Plan B: If I can find a stock bootloader.bin file for GT-P5113 tablet, I can try resetting the download counter using ODIN to flash that file. I already tried installing the GT-P5110 bootloader via ODIN, and it would not connect or flash. As life has taught me many times "Quitters never win & winners never quit" so I am determined to find a solution!
Glenn
Click to expand...
Click to collapse

Counter reset
jamesclinton said:
Sorry for the noob question, but what will happen if we can not reset the counter to 0 i see so many people are talking abt it how important is this "counter reset" stuff?
edit: This is my first samsung device so i don´t know much abt it, am still learning.
Click to expand...
Click to collapse
Unless counter says zero you may not be able to get any service if/when needed
because Samsung can refuse to honor the factory warranty. It's that simple. However, this tablet is my 4th Android tablet and I've never needed any service on ANY of them. All my former tablets have been sold or given away as gifts and ALL still work perfectly.
Glenn

weltwon said:
If I can find a stock bootloader.bin file for GT-P5113 tablet, I can try resetting the download counter using ODIN to flash that file.
Click to expand...
Click to collapse
Is there a way to pull the stock bootloader without rooting/adding to the Odin counter? So if someone out there was reading this and had stock they could supply you with it?
Sent from my GT-P5113 using XDA Premium HD app

Pulling bootloader
shakatu said:
Is there a way to pull the stock bootloader without rooting/adding to the Odin counter? So if someone out there was reading this and had stock they could supply you with it?
Sent from my GT-P5113 using XDA Premium HD app
Click to expand...
Click to collapse
Good question. I normally find files like this using Root Explorer which is a Catch 22 or getting it from Samsung but they have not released GT-P5113 Stock files. Maybe someone reading this (who is smarter than me) will know of a way we can get it!
Glenn

weltwon said:
Good question. I normally find files like this using Root Explorer which is a Catch 22 or getting it from Samsung but they have not released GT-P5113 Stock files. Maybe someone reading this (who is smarter than me) will know of a way we can get it!
Glenn
Click to expand...
Click to collapse
Okay... Cuz I haven't rooted mine yet, but I may considering pulling the stock bootloader... Though I really don't want to mess with the bootloader...
Since it was from Best Buy is there really any worry about the Odin counter just in case something DOES happen with my tablet after root? I've heard some people say Best Buy doesn't check Odin...
My Samsung phone used the recovery root method so the counter still says "NO"...

Best Buy
shakatu said:
Okay... Cuz I haven't rooted mine yet, but I may considering pulling the stock bootloader... Though I really don't want to mess with the bootloader...
Since it was from Best Buy is there really any worry about the Odin counter just in case something DOES happen with my tablet after root? I've heard some people say Best Buy doesn't check Odin...
My Samsung phone used the recovery root method so the counter still says "NO"...
Click to expand...
Click to collapse
Based on my experiences and feedback from friends, odds are 70/30 in your favor with Best Buy. I know it's just a matter of time before I get my hands on the stock bootloader.bin file or we get a version of TriangleAway for this tablet.
What's interesting to me is that only about 1 in 10 people who root their tablets seem to even care about being able to unroot it and i've yet to meet anyone who has needed service of any kind on a Tab2.
Glenn

Thanks,un-rooted,DLed and installed the update and rooted again in 1/2 hr. Worked great! 25 minutes was download time for the update via Kies.

does this work for the 7 inch tablets (p3113)??

kan_bleach said:
does this work for the 7 inch tablets (p3113)??
Click to expand...
Click to collapse
You are asking in the wrong dev section. I do not have a 7 inch tab2.

weltwon said:
You are asking in the wrong dev section. I do not have a 7 inch tab2.
Click to expand...
Click to collapse
Hmm ok...thanks for reply....i was hoping that this would work on the 7 inch tab too...

Unrooting Tab2 7 inch model with this tool
kan_bleach said:
Hmm ok...thanks for reply....i was hoping that this would work on the 7 inch tab too...
Click to expand...
Click to collapse
In theory it should work but I can not and wwill not guarantee it.
If you try it, please post your results here so others will know it does or does not work with the Tab2 7 inch model.
Glenn

Gents,
I have been looking for the stock recovery for the 5100.
who plz can provide?

Tf300t with usb modem

Hi. I have my asus tf300t only with wireless. I have at home hsdpa usb modem huawei model e220. Does anyone know if i put my sim card in modem and plug it in tf300t, is there any chance to get internet acces? Tnx

as far as I'm aware Android does not support USB modems - So no it isn't possible.
Unless someone can correct me (Which would be great as I'd like to be able to do this).

gypsyshaw said:
as far as I'm aware Android does not support USB modems - So no it isn't possible.
Unless someone can correct me (Which would be great as I'd like to be able to do this).
Click to expand...
Click to collapse
Android does support USB modems.
It just needs an USB port that is in host mode. Also some kernel/ramdisk modification needs to be done.
I am using a huawei e153 USB modem on my advent Vega tablet. No problems.
But as I said, it will no work on stock kernel, it needs the correct RIL, references t the ril and a recompilation of android with phone features enabled.
Verstuurd van mijn Transformer Pad TF300T met Tapatalk

gypsyshaw said:
as far as I'm aware Android does not support USB modems - So no it isn't possible.
Unless someone can correct me (Which would be great as I'd like to be able to do this).
Click to expand...
Click to collapse
most chinese tablets comes with included drivers for usb modems (generally huawey 3g sticks) so it is possible, at least in theory.
dunno if they are linked to some framework or if they are easy to port to other roms.

boriss30 said:
Hi. I have my asus tf300t only with wireless. I have at home hsdpa usb modem huawei model e220. Does anyone know if i put my sim card in modem and plug it in tf300t, is there any chance to get internet acces? Tnx
Click to expand...
Click to collapse
yes it works, somewhere here is an old thread on this a few months ago a few of us have it working, i cant remember the software off hand its not near me, but that old thread should mention what you need to load to get it working.
just search for it it will show up.

[Q] Seek Thermal camera on Galaxy Tab 2 10.1

Hi guys
Here is my problem: I upgraded my Galaxy Tab 2 10.1 P5113 to Kitkat 4.4.4
That was a requirement for installing the Seek Thermal Camera that I am having trouble with (please Google it I am not allowed to post links yet)
The other requirement that someone from support indicated to me was OTH USB which Galaxy Tab 2 10.1 seems to have
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
My tablet is rooted. Is there any way I can debug this and see if actually the kernel sees this new thermal camera ?
thanks a lot
PF

PF4XDA said:
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
Click to expand...
Click to collapse
I tried three micro USB extension cables. Two from EBAY did not work. Tablet did not detect camera.
One from Amazon (suggested by support) does work.
Http: SLASH www DOT amazon DOT com SLASH gp SLASH product SLASH B00HAOK7XE SLASH ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

prof_braino said:
I tried three micro USB extension cables. Two from EBAY did not work. Tablet did not detect camera.
One from Amazon (suggested by support) does work.
Http: SLASH www DOT amazon DOT com SLASH gp SLASH product SLASH B00HAOK7XE SLASH ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
My Tablet does not have that type of connector at the tablet end
I don't know what you are talking about

PF4XDA said:
Hi guys
Here is my problem: I upgraded my Galaxy Tab 2 10.1 P5113 to Kitkat 4.4.4
That was a requirement for installing the Seek Thermal Camera that I am having trouble with (please Google it I am not allowed to post links yet)
The other requirement that someone from support indicated to me was OTH USB which Galaxy Tab 2 10.1 seems to have
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
My tablet is rooted. Is there any way I can debug this and see if actually the kernel sees this new thermal camera ?
thanks a lot
PF
Click to expand...
Click to collapse
How did you root it? And I know the cable your talking about, it isn't the micro SD cable like everyone has, it's the one that looks like an older apple cable. I have the Tab 2 7.0
From my CM11 S3

ShapesBlue said:
How did you root it? And I know the cable your talking about, it isn't the micro SD cable like everyone has, it's the one that looks like an older apple cable. I have the Tab 2 7.0
From my CM11 S3
Click to expand...
Click to collapse
I rooted the tablet following the procedures posted on this site

PF4XDA said:
I rooted the tablet following the procedures posted on this site
Click to expand...
Click to collapse
Ok, there are many ways to root a device. Which specific method did you use
From my CM11 S3

ShapesBlue said:
Ok, there are many ways to root a device. Which specific method did you use
From my CM11 S3
Click to expand...
Click to collapse
I installed CWM or something like that
In the process it rooted the device. I am now able to get the # prompt if I use "su"
This is irrelevant for the topic since the camera is not seen by the device

PF4XDA said:
I installed CWM or something like that
In the process it rooted the device. I am now able to get the # prompt if I use "su"
This is irrelevant for the topic since the camera is not seen by the device
Click to expand...
Click to collapse
I'm attempting to help you, I won't bother with that kind of response. Good luck
From my CM11 S3

ShapesBlue said:
I'm attempting to help you, I won't bother with that kind of response. Good luck
From my CM11 S3
Click to expand...
Click to collapse
Well.....thanks but no thanks
If it takes us 2 days to get to the point of your questions (we are not even close to that) then I would prefer not to be helped this way
You could have said I need you to do this and that... if your tablet was not rooted correctly then this is not going to work.
The camera does not require the tablet to be rooted. debugging that might require that but I don't see your point.

PF4XDA said:
Well.....thanks but no thanks
If it takes us 2 days to get to the point of your questions (we are not even close to that) then I would prefer not to be helped this way
You could have said I need you to do this and that... if your tablet was not rooted correctly then this is not going to work.
The camera does not require the tablet to be rooted. debugging that might require that but I don't see your point.
Click to expand...
Click to collapse
I've never had an issue with the camera on my tablet or my phone... Try another app if that one doesn't work. The attitude is something I don't have to deal with and you can easily find someone else to help you
As far as debugging sometimes things just don't work, there isn't always a reason it just happens
From my CM11 S3

ShapesBlue said:
I've never had an issue with the camera on my tablet or my phone... Try another app if that one doesn't work. The attitude is something I don't have to deal with and you can easily find someone else to help you
As far as debugging sometimes things just don't work, there isn't always a reason it just happens
From my CM11 S3
Click to expand...
Click to collapse
What camera type do you have?

I don't have the tab 2 10.1, I'm running the stock CM camera, like I said if you don't want help I won't help
From my CM11 S3

ShapesBlue said:
I don't have the tab 2 10.1, I'm running the stock CM camera, like I said if you don't want help I won't help
From my CM11 S3
Click to expand...
Click to collapse
Like I said I don't need your help
You should read a little bit about Seek Thermal, what it does and what it needs and then you can think about helping me
Don't offer something that you don't have
Bye!

PF4XDA said:
Like I said I don't need your help
You should read a little bit about Seek Thermal, what it does and what it needs and then you can think about helping me
Don't offer something that you don't have
Bye!
Click to expand...
Click to collapse
For your information I help people all the time, there's no need to be rude
From my CM11 S3

ShapesBlue said:
For your information I help people all the time, there's no need to be rude
From my CM11 S3
Click to expand...
Click to collapse
Then try to be less patronizing when you offer your help and make sure you understand the context

So you are using this with a micro USB adapter?
Looking at the specs it doesn't mention "android tablet compatibility " except for eYepaDs .
Maybe that's why IT doesn't work?
Pp.

PanchoPlanet said:
So you are using this with a micro USB adapter?
Looking at the specs it doesn't mention "android tablet compatibility " except for eYepaDs .
Maybe that's why IT doesn't work?
Pp.
Click to expand...
Click to collapse
Yes I am trying to use it this way
Here is what the developer told me
Ryan (Seek Thermal)
Nov 06 10:22
The basic requirements that can prevent download are 4.3 or newer Android and a rear-facing native camera. The USB OTG functionality, as well as the USB port providing power to OTG attached devices, will not block download, but the camera won't connect. Ideally we would block downloads by USB OTG functionality, but tha tis not an option in Android right now.
Ryan
Seek Support

So you need to revert to a stone age rom in order to use a gadget that is not really supported by an android tablet, and the developer will tell you a bunch of double talk so you don't return the gadget costing him a profit.
"And a rear facing native camera " will prevent download?
What does he mean by "prevent download "?
Does that mean that app won't function?
You need to download samsung stock firmware, and flash with Odin (may need to do factory reset also ) if it doesn't work after first odin flash.
I would test before rooting.
Pp.

PanchoPlanet said:
So you need to revert to a stone age rom in order to use a gadget that is not really supported by an android tablet, and the developer will tell you a bunch of double talk so you don't return the gadget costing him a profit.
"And a rear facing native camera " will prevent download?
What does he mean by "prevent download "?
Does that mean that app won't function?
You need to download samsung stock firmware, and flash with Odin (may need to do factory reset also ) if it doesn't work after first odin flash.
I would test before rooting.
Pp.
Click to expand...
Click to collapse
Nope he was dumb ..actually he wanted to say that if you have something older than 4.3 you can't install the app
The rear facing camera was unclear to me.
I am going to but a cable and test this in an emulator
I suspect that my cable can be the right one but it does not take the OTG power from the tablet to the other end of the cable...
I did not make sure that the cable was OTG, I thought that only the port is that way. Not sure how I can verify this

Don't think cable has to be OTG specific, if the voltage is present to power a device the cable will work. You may need to find out what pin on connector is supposed to be hot for OTG and test.
Pp.

USB OTG problem

Hello, i'm having a problem about my phone not recognizing my external keyboard. The keyboard is working on my computer and it used to work on my phone then suddenly my phone cant recognize it anymore although it gives power to it. Not sure if it's the OTG cable or my phone in general.

danny.worsnoop2828 said:
Hello, i'm having a problem about my phone not recognizing my external keyboard. The keyboard is working on my computer and it used to work on my phone then suddenly my phone cant recognize it anymore although it gives power to it. Not sure if it's the OTG cable or my phone in general.
Click to expand...
Click to collapse
Have you changed anything about the device between when it worked and now?
Does the kernel the device has now support OTG?
Sent from my SCH-I535 using Tapatalk

Droidriven said:
Have you changed anything about the device between when it worked and now?
Does the kernel the device has now support OTG?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
No, i didn't change anything, i just use my phone the way i use it before.

danny.worsnoop2828 said:
No, i didn't change anything, i just use my phone the way i use it before.
Click to expand...
Click to collapse
You haven't applied any stock updates or anything? If it worked before then you've changed something in settings or something if you haven't updated the device.
It would help if you posted your device model number and the stock firmware version/build number that your device has. Then I can help you troubleshoot through the required steps for your device.

Droidriven said:
You haven't applied any stock updates or anything? If it worked before then you've changed something in settings or something if you haven't updated the device.
It would help if you posted your device model number and the stock firmware version/build number that your device has. Then I can help you troubleshoot through the required steps for your device.
Click to expand...
Click to collapse
Its a local phone here in the philippines.
Cherry Flare S3 Power Build Number is Lollipop SW04 08252015
I just checked for software update and it says that i have the latest version, i don't remember changing anything on the settings, but i'm quite sure i haven't

danny.worsnoop2828 said:
Its a local phone here in the philippines.
Cherry Flare S3 Power Build Number is Lollipop SW04 08252015
I just checked for software update and it says that i have the latest version, i don't remember changing anything on the settings, but i'm quite sure i haven't
Click to expand...
Click to collapse
You are missing the point about the update.
I'm asking if the device has what it had when you bought it or has it had a stock update applied at any time? If it was on one version when you bought it and the keyboard worked at that time but has had a stock update since then and now the keyboard isn't working then that could be what is giving you problems.
Have you also checked the language and input setting to see if you have the physical keyboard enabled?

Droidriven said:
You are missing the point about the update.
I'm asking if the device has what it had when you bought it or has it had a stock update applied at any time? If it was on one version when you bought it and the keyboard worked at that time but has had a stock update since then and now the keyboard isn't working then that could be what is giving you problems.
Have you also checked the language and input setting to see if you have the physical keyboard enabled?
Click to expand...
Click to collapse
The physical keyboard is enabled. Sorry, I dont have idea what is stock update but it's still the same version when i bought it.