Tf300t with usb modem - Transformer TF300T Q&A, Help & Troubleshooting

Hi. I have my asus tf300t only with wireless. I have at home hsdpa usb modem huawei model e220. Does anyone know if i put my sim card in modem and plug it in tf300t, is there any chance to get internet acces? Tnx

as far as I'm aware Android does not support USB modems - So no it isn't possible.
Unless someone can correct me (Which would be great as I'd like to be able to do this).

gypsyshaw said:
as far as I'm aware Android does not support USB modems - So no it isn't possible.
Unless someone can correct me (Which would be great as I'd like to be able to do this).
Click to expand...
Click to collapse
Android does support USB modems.
It just needs an USB port that is in host mode. Also some kernel/ramdisk modification needs to be done.
I am using a huawei e153 USB modem on my advent Vega tablet. No problems.
But as I said, it will no work on stock kernel, it needs the correct RIL, references t the ril and a recompilation of android with phone features enabled.
Verstuurd van mijn Transformer Pad TF300T met Tapatalk

gypsyshaw said:
as far as I'm aware Android does not support USB modems - So no it isn't possible.
Unless someone can correct me (Which would be great as I'd like to be able to do this).
Click to expand...
Click to collapse
most chinese tablets comes with included drivers for usb modems (generally huawey 3g sticks) so it is possible, at least in theory.
dunno if they are linked to some framework or if they are easy to port to other roms.

boriss30 said:
Hi. I have my asus tf300t only with wireless. I have at home hsdpa usb modem huawei model e220. Does anyone know if i put my sim card in modem and plug it in tf300t, is there any chance to get internet acces? Tnx
Click to expand...
Click to collapse
yes it works, somewhere here is an old thread on this a few months ago a few of us have it working, i cant remember the software off hand its not near me, but that old thread should mention what you need to load to get it working.
just search for it it will show up.

Related

usbOTG on 3.2.2

I'm running the latest HC 3.2.2 due to having my LTE modem upgraded. It is rooted and I've tried using Drive Mount and USB Watcher to get my HDD recognized through usbOTG. It seemed to work fine before but now I can't get it to work.
A few times I've been able to see the HDD in one of the two mounting programs but then it disappears. The HDD turns off (the lights go off) after 20-30 seconds once it's recognized.
Has anybody on 3.2.2 been able to get their usbOTG to recognize? My SD card currently points to External1. Could that be an issue?
911junkie said:
I'm running the latest HC 3.2.2 due to having my LTE modem upgraded. It is rooted and I've tried using Drive Mount and USB Watcher to get my HDD recognized through usbOTG. It seemed to work fine before but now I can't get it to work.
A few times I've been able to see the HDD in one of the two mounting programs but then it disappears. The HDD turns off (the lights go off) after 20-30 seconds once it's recognized.
Has anybody on 3.2.2 been able to get their usbOTG to recognize? My SD card currently points to External1. Could that be an issue?
Click to expand...
Click to collapse
the micro sdcard should be at mnt/external1. That is correct. I suggest you flash the Tiamat Odachi kernel 2.2.0 on your rooted 4G Xoom. That should return any OTG functionality you may have lost. This kernel is the only one I know of that was expressly made for and known to be working well on the 4G Xoom. Team Rogue may have also been working on a 4G kernel. Just don't try to flash any custom ROMs until ICS is ported.
Well I tried with latest TIAMAT kernel as well as ROGUE kernel and both give me the same result. Neither drivemount nor usb watcher otg seems to recognize the HDD.
I appreciate the help. Just can't seem to figure out why it's not working. It worked great on Tiamat rom.
911junkie said:
Well I tried with latest TIAMAT kernel as well as ROGUE kernel and both give me the same result. Neither drivemount nor usb watcher otg seems to recognize the HDD.
I appreciate the help. Just can't seem to figure out why it's not working. It worked great on Tiamat rom.
Click to expand...
Click to collapse
Well, I have wifi only and you can see my configuration in my signature line, but on the Odachi kernel I just mounted my 750GB Passport HDD. I used USB Mass Storage Watcher. Works like a charm. I think the newest kernel install overwrites the kernel in the ROM and the kernel controls this hardware stuff, right?
Hello everyone, happy Thanksgiving. How can I use this feature on my Xoom without rooting it? Can someone help me please.
P.S. I have not purchased the OTG cable yet. I need more info before buying one.
Thank you.
Can someone help me please. Thanks.
Cato22 said:
Hello everyone, happy Thanksgiving. How can I use this feature on my Xoom without rooting it? Can someone help me please.
P.S. I have not purchased the OTG cable yet. I need more info before buying one.
Thank you.
Click to expand...
Click to collapse
Unfortunately, the usb host mode is only available for a rooted Xoom with a custom kernel that gives this functionality. Otherwise the microusb port is only for connecting to your pc.
Why not root?
okantomi said:
Unfortunately, the usb host mode is only available for a rooted Xoom with a custom kernel that gives this functionality. Otherwise the microusb port is only for connecting to your pc.
Why not root?
Click to expand...
Click to collapse
Because I don't know from where to start rooting.
I find that even with root and either Katana or Odachi I cannot get usbOTG to work with a portable HDD. I'm on 3.2.2.
911junkie said:
I find that even with root and either Katana or Odachi I cannot get usbOTG to work with a portable HDD. I'm on 3.2.2.
Click to expand...
Click to collapse
Is your HDD a newer one? I have a 1st generation Passport that needs a powered hub to run it Xoom doesn't have enough power, but my newer, bigger Passport works just dandy.
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
Cato22 said:
Because I don't know from where to start rooting.
Click to expand...
Click to collapse
Try this guide: http://forum.xda-developers.com/showthread.php?t=1249798
It should help. There's a modified adb setup link that has you only download just what you need for root...but the guide really walks you through everything.
I had it working on an earlier Tiamat build and kernel. But since the 4G update it's been a no go.
911junkie said:
I had it working on an earlier Tiamat build and kernel. But since the 4G update it's been a no go.
Click to expand...
Click to collapse
That's strange... what could have caused that?

Cleanrom tf700

Hello so I was going to install the TWRP clean rom for my device, however on the download link my device was not avalible, can someone suggest any other clean rom for me?
Ps: One of the main reasons that I want to try a clean rom is that i hope that the micro hdmi cable will work again, I dont completly understand what the clean rom does so does anyone think this might help?
(the micro hdmi worked fine before, but the next day the device didnt find the cable, however the TV finds it. The day before it stopped working I added a few roms for my emulator)
thx in advance
TWRP is a custom recovery.
CleanROM Inheritance(CROMI) is a different firmware or ROM for your device.
You need to install TWRP if you want to flash a new ROM like CROMI.
In order to install a custom recovery like TWRP you need to be unlocked. There is a sticky at the top of General waling you through the steps as well as guides.
Here is a link to the CleanROM thread where you can download the latest version
http://forum.xda-developers.com/showthread.php?t=2049274
Stammis said:
Hello so I was going to install the TWRP clean rom for my device, however on the download link my device was not avalible, can someone suggest any other clean rom for me?
Ps: One of the main reasons that I want to try a clean rom is that i hope that the micro hdmi cable will work again, I dont completly understand what the clean rom does so does anyone think this might help?
(the micro hdmi worked fine before, but the next day the device didnt find the cable, however the TV finds it. The day before it stopped working I added a few roms for my emulator)
thx in advance
Click to expand...
Click to collapse
It sounds like you indeed are mixing up "custom ROM", recovery and CROMI. Be sure to read up on those and DO NOT FLASH ANYTHING until perfectly educated. You might end up with a very expensive paperweight otherwise. We'll gladly help you in preventing that, rather than cleaning up the mess afterwards.
Sv: [Q] micro hdmi cable
I have indeed already flashed my device and am about to instal clean rom, however as i said there s non for my device apparently, atleast the download link doess not show for my devce. So back to my original question. Are there any other i can use and do you think it wil fix my hdmi connection problem?
Skickat från min ASUS Transformer Pad TF700T via Tapatalk 2
Stammis said:
I have indeed already flashed my device and am about to instal clean rom, however as i said there s non for my device apparently, atleast the download link doess not show for my devce. So back to my original question. Are there any other i can use and do you think it wil fix my hdmi connection problem?
Skickat från min ASUS Transformer Pad TF700T via Tapatalk 2
Click to expand...
Click to collapse
What do you mean there is none for your device? The download link for what? I make the ROM for the TF700.....
Stammis said:
I have indeed already flashed my device and am about to instal clean rom, however as i said there s non for my device apparently, atleast the download link doess not show for my devce. So back to my original question. Are there any other i can use and do you think it wil fix my hdmi connection problem?
Skickat från min ASUS Transformer Pad TF700T via Tapatalk 2
Click to expand...
Click to collapse
I think I now understand where you're getting at: the original CleanROM is no longer available for the TF700. Scrossler ended support -- sbdags picked it up and called it CleanRom Inheritance (CROMI for short). Go to the Development forum and pick it up there, and flash away.
Lightbulb moment! Thank you Marty! :good:
Sv: Cleanrom tf700
Thx man I found the cleanrom inheritence for tf700
Skickat från min ASUS Transformer Pad TF700T via Tapatalk 2

GT-N5100 After 4.2.2 Update MultimediaDock not recognized

Hi
Today i make the official update to 4.2.2 on my 5100.
After this my Samsung Multimedia Dock wont work. Neither HDMI nor Mass Storage (USB flash drive) is recognized.
Thats really annoying because i need the dock for my work (Presentations with VGA adapter and Mouse)!
Would anyone confirm this problem?
Have anyone a solution?
Thanks for answering!
MoWa007 said:
Hi
Today i make the official update to 4.2.2 on my 5100.
After this my Samsung Multimedia Dock wont work. Neither HDMI nor Mass Storage (USB flash drive) is recognized.
Thats really annoying because i need the dock for my work (Presentations with VGA adapter and Mouse)!
Would anyone confirm this problem?
Have anyone a solution?
Thanks for answering!
Click to expand...
Click to collapse
Why do you have a question posted in the accessories section?
Muffycheeks said:
Why do you have a question posted in the accessories section?
Click to expand...
Click to collapse
Sorry for that!
But i am looking around in this section and there are a lot of questions.
Im thinking too, that it was a important information for users that it could be problems with accessories like the multimedia dock after a update.
Yep, Confirmed.
Multimedia Dock only working as a charging dock now with 4.2.2
Can't even sync with it.
Went back to 4.1.2 because of this and all is working fine again.
GT N5100 After 4 2 2 Update MultimediaDock not recog
You have to install them while the card is NOT connected. After you installed them, connect the card. As you can read in the post I linked to I had to install them several times myself and reboot before I did not get that device not recognized anymore. After that it seemed to work.....
Lauggidadiero said:
You have to install them while the card is NOT connected. After you installed them, connect the card. As you can read in the post I linked to I had to install them several times myself and reboot before I did not get that device not recognized anymore. After that it seemed to work.....
Click to expand...
Click to collapse
It´s not working for me.
Did you meen the Sim-Card not to Connect.
If I right understand you, I have to plug in the Docking (with Power Chord on) without connected to my carrier?
Thanks for answering!
Maybe he means the usb cable. ( cord? )
Back to 4.1.2
And all is working again!
Sincerely, the 4.2 update was a bad choice. Samsung should make a better update. I'm not spitting on it, but no Smart Dock mode?
I'm hopefull that Samsung will launch a bugfix for that.
More than half year passed since that problem appeared with the 4.2.2 update.... Is there any solution to use the multimedia dock on 4.2.2 or only the downgrade can help?
You need a kernel with dock support enabled.
There are some configurations to change while compile new kernel:
CONFIG_MUIC_MAX77693_SUPPORT_OTG_AUDIO_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_SMART_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_CAR_DOCK=y
I compiled my own kernel and use a cable made to support simultaneos charge and otg.
If you want, send a message and I will sent my kernel.
I wonder how the adapter I've got off eBay^ works then. As long as I do plug in power + USB before the HDMI, I get screen off, charging, and USB host and MHL output. Although the only way I can trickle charger rather than slowly drain is by using the 3A charger from my Chromebook instead of a regular 2A charger.
^: http://www.ebay.com/itm/USB-OTG-MHL...LKgwLjtQBabKyCvZbnoAQ%3D&orig_cvip=true&rt=nc
Has anyone tried the Samsung dock after the KitKat update?
Spidey01 said:
Has anyone tried the Samsung dock after the KitKat update?
Click to expand...
Click to collapse
Doesn't work. You need a special kernel.
sidmoraes said:
Doesn't work. You need a special kernel.
Click to expand...
Click to collapse
Do you have a smart dock enabled kernel for 4.4.2?
I would also be interested in a KitKat Kernel that's working with the dock...
sidmoraes said:
You need a kernel with dock support enabled.
There are some configurations to change while compile new kernel:
CONFIG_MUIC_MAX77693_SUPPORT_OTG_AUDIO_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_SMART_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_CAR_DOCK=y
I compiled my own kernel and use a cable made to support simultaneos charge and otg.
If you want, send a message and I will sent my kernel.
Click to expand...
Click to collapse
I just updated to 4.4.2 and lost docking ability. Will it be possible to use your kernel for an SGH-I467 from AT&T, the boot loader is locked...I don't know of a method to unlock it. Please advise. Thank you:good:
Any further update to our device?

[Q] Seek Thermal camera on Galaxy Tab 2 10.1

Hi guys
Here is my problem: I upgraded my Galaxy Tab 2 10.1 P5113 to Kitkat 4.4.4
That was a requirement for installing the Seek Thermal Camera that I am having trouble with (please Google it I am not allowed to post links yet)
The other requirement that someone from support indicated to me was OTH USB which Galaxy Tab 2 10.1 seems to have
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
My tablet is rooted. Is there any way I can debug this and see if actually the kernel sees this new thermal camera ?
thanks a lot
PF
PF4XDA said:
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
Click to expand...
Click to collapse
I tried three micro USB extension cables. Two from EBAY did not work. Tablet did not detect camera.
One from Amazon (suggested by support) does work.
Http: SLASH www DOT amazon DOT com SLASH gp SLASH product SLASH B00HAOK7XE SLASH ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
prof_braino said:
I tried three micro USB extension cables. Two from EBAY did not work. Tablet did not detect camera.
One from Amazon (suggested by support) does work.
Http: SLASH www DOT amazon DOT com SLASH gp SLASH product SLASH B00HAOK7XE SLASH ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
My Tablet does not have that type of connector at the tablet end
I don't know what you are talking about
PF4XDA said:
Hi guys
Here is my problem: I upgraded my Galaxy Tab 2 10.1 P5113 to Kitkat 4.4.4
That was a requirement for installing the Seek Thermal Camera that I am having trouble with (please Google it I am not allowed to post links yet)
The other requirement that someone from support indicated to me was OTH USB which Galaxy Tab 2 10.1 seems to have
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
My tablet is rooted. Is there any way I can debug this and see if actually the kernel sees this new thermal camera ?
thanks a lot
PF
Click to expand...
Click to collapse
How did you root it? And I know the cable your talking about, it isn't the micro SD cable like everyone has, it's the one that looks like an older apple cable. I have the Tab 2 7.0
From my CM11 S3
ShapesBlue said:
How did you root it? And I know the cable your talking about, it isn't the micro SD cable like everyone has, it's the one that looks like an older apple cable. I have the Tab 2 7.0
From my CM11 S3
Click to expand...
Click to collapse
I rooted the tablet following the procedures posted on this site
PF4XDA said:
I rooted the tablet following the procedures posted on this site
Click to expand...
Click to collapse
Ok, there are many ways to root a device. Which specific method did you use
From my CM11 S3
ShapesBlue said:
Ok, there are many ways to root a device. Which specific method did you use
From my CM11 S3
Click to expand...
Click to collapse
I installed CWM or something like that
In the process it rooted the device. I am now able to get the # prompt if I use "su"
This is irrelevant for the topic since the camera is not seen by the device
PF4XDA said:
I installed CWM or something like that
In the process it rooted the device. I am now able to get the # prompt if I use "su"
This is irrelevant for the topic since the camera is not seen by the device
Click to expand...
Click to collapse
I'm attempting to help you, I won't bother with that kind of response. Good luck
From my CM11 S3
ShapesBlue said:
I'm attempting to help you, I won't bother with that kind of response. Good luck
From my CM11 S3
Click to expand...
Click to collapse
Well.....thanks but no thanks
If it takes us 2 days to get to the point of your questions (we are not even close to that) then I would prefer not to be helped this way
You could have said I need you to do this and that... if your tablet was not rooted correctly then this is not going to work.
The camera does not require the tablet to be rooted. debugging that might require that but I don't see your point.
PF4XDA said:
Well.....thanks but no thanks
If it takes us 2 days to get to the point of your questions (we are not even close to that) then I would prefer not to be helped this way
You could have said I need you to do this and that... if your tablet was not rooted correctly then this is not going to work.
The camera does not require the tablet to be rooted. debugging that might require that but I don't see your point.
Click to expand...
Click to collapse
I've never had an issue with the camera on my tablet or my phone... Try another app if that one doesn't work. The attitude is something I don't have to deal with and you can easily find someone else to help you
As far as debugging sometimes things just don't work, there isn't always a reason it just happens
From my CM11 S3
ShapesBlue said:
I've never had an issue with the camera on my tablet or my phone... Try another app if that one doesn't work. The attitude is something I don't have to deal with and you can easily find someone else to help you
As far as debugging sometimes things just don't work, there isn't always a reason it just happens
From my CM11 S3
Click to expand...
Click to collapse
What camera type do you have?
I don't have the tab 2 10.1, I'm running the stock CM camera, like I said if you don't want help I won't help
From my CM11 S3
ShapesBlue said:
I don't have the tab 2 10.1, I'm running the stock CM camera, like I said if you don't want help I won't help
From my CM11 S3
Click to expand...
Click to collapse
Like I said I don't need your help
You should read a little bit about Seek Thermal, what it does and what it needs and then you can think about helping me
Don't offer something that you don't have
Bye!
PF4XDA said:
Like I said I don't need your help
You should read a little bit about Seek Thermal, what it does and what it needs and then you can think about helping me
Don't offer something that you don't have
Bye!
Click to expand...
Click to collapse
For your information I help people all the time, there's no need to be rude
From my CM11 S3
ShapesBlue said:
For your information I help people all the time, there's no need to be rude
From my CM11 S3
Click to expand...
Click to collapse
Then try to be less patronizing when you offer your help and make sure you understand the context
So you are using this with a micro USB adapter?
Looking at the specs it doesn't mention "android tablet compatibility " except for eYepaDs .
Maybe that's why IT doesn't work?
Pp.
PanchoPlanet said:
So you are using this with a micro USB adapter?
Looking at the specs it doesn't mention "android tablet compatibility " except for eYepaDs .
Maybe that's why IT doesn't work?
Pp.
Click to expand...
Click to collapse
Yes I am trying to use it this way
Here is what the developer told me
Ryan (Seek Thermal)
Nov 06 10:22
The basic requirements that can prevent download are 4.3 or newer Android and a rear-facing native camera. The USB OTG functionality, as well as the USB port providing power to OTG attached devices, will not block download, but the camera won't connect. Ideally we would block downloads by USB OTG functionality, but tha tis not an option in Android right now.
Ryan
Seek Support
So you need to revert to a stone age rom in order to use a gadget that is not really supported by an android tablet, and the developer will tell you a bunch of double talk so you don't return the gadget costing him a profit.
"And a rear facing native camera " will prevent download?
What does he mean by "prevent download "?
Does that mean that app won't function?
You need to download samsung stock firmware, and flash with Odin (may need to do factory reset also ) if it doesn't work after first odin flash.
I would test before rooting.
Pp.
PanchoPlanet said:
So you need to revert to a stone age rom in order to use a gadget that is not really supported by an android tablet, and the developer will tell you a bunch of double talk so you don't return the gadget costing him a profit.
"And a rear facing native camera " will prevent download?
What does he mean by "prevent download "?
Does that mean that app won't function?
You need to download samsung stock firmware, and flash with Odin (may need to do factory reset also ) if it doesn't work after first odin flash.
I would test before rooting.
Pp.
Click to expand...
Click to collapse
Nope he was dumb ..actually he wanted to say that if you have something older than 4.3 you can't install the app
The rear facing camera was unclear to me.
I am going to but a cable and test this in an emulator
I suspect that my cable can be the right one but it does not take the OTG power from the tablet to the other end of the cable...
I did not make sure that the cable was OTG, I thought that only the port is that way. Not sure how I can verify this
Don't think cable has to be OTG specific, if the voltage is present to power a device the cable will work. You may need to find out what pin on connector is supposed to be hot for OTG and test.
Pp.

USB OTG problem

Hello, i'm having a problem about my phone not recognizing my external keyboard. The keyboard is working on my computer and it used to work on my phone then suddenly my phone cant recognize it anymore although it gives power to it. Not sure if it's the OTG cable or my phone in general.
danny.worsnoop2828 said:
Hello, i'm having a problem about my phone not recognizing my external keyboard. The keyboard is working on my computer and it used to work on my phone then suddenly my phone cant recognize it anymore although it gives power to it. Not sure if it's the OTG cable or my phone in general.
Click to expand...
Click to collapse
Have you changed anything about the device between when it worked and now?
Does the kernel the device has now support OTG?
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Have you changed anything about the device between when it worked and now?
Does the kernel the device has now support OTG?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
No, i didn't change anything, i just use my phone the way i use it before.
danny.worsnoop2828 said:
No, i didn't change anything, i just use my phone the way i use it before.
Click to expand...
Click to collapse
You haven't applied any stock updates or anything? If it worked before then you've changed something in settings or something if you haven't updated the device.
It would help if you posted your device model number and the stock firmware version/build number that your device has. Then I can help you troubleshoot through the required steps for your device.
Droidriven said:
You haven't applied any stock updates or anything? If it worked before then you've changed something in settings or something if you haven't updated the device.
It would help if you posted your device model number and the stock firmware version/build number that your device has. Then I can help you troubleshoot through the required steps for your device.
Click to expand...
Click to collapse
Its a local phone here in the philippines.
Cherry Flare S3 Power Build Number is Lollipop SW04 08252015
I just checked for software update and it says that i have the latest version, i don't remember changing anything on the settings, but i'm quite sure i haven't
danny.worsnoop2828 said:
Its a local phone here in the philippines.
Cherry Flare S3 Power Build Number is Lollipop SW04 08252015
I just checked for software update and it says that i have the latest version, i don't remember changing anything on the settings, but i'm quite sure i haven't
Click to expand...
Click to collapse
You are missing the point about the update.
I'm asking if the device has what it had when you bought it or has it had a stock update applied at any time? If it was on one version when you bought it and the keyboard worked at that time but has had a stock update since then and now the keyboard isn't working then that could be what is giving you problems.
Have you also checked the language and input setting to see if you have the physical keyboard enabled?
Droidriven said:
You are missing the point about the update.
I'm asking if the device has what it had when you bought it or has it had a stock update applied at any time? If it was on one version when you bought it and the keyboard worked at that time but has had a stock update since then and now the keyboard isn't working then that could be what is giving you problems.
Have you also checked the language and input setting to see if you have the physical keyboard enabled?
Click to expand...
Click to collapse
The physical keyboard is enabled. Sorry, I dont have idea what is stock update but it's still the same version when i bought it.

Categories

Resources