I rooted my phone today using "Bin4ry for Root A110 By sagarwep". I downloaded and put Bumblee rom in my SD card and tried to apply it through CWM Recovery. But I get the "Signature Verification Failed" Installation Aborted. I googled about this problem, and people have suggested to turn of signature verification in the advanced options menu in CWM Recovery, but there is no advanced options in my version of cwm recovery. Please someone help me to overcome this problem and install Bumblebee rom!
Thanks in Advance
Boot into cwm.
Go to install zip from sd card and there u will find an option of toggle signature verification.
Just turn it off.
there u go and install bumblebee rom.
[email protected] said:
Boot into cwm.
Go to install zip from sd card and there u will find an option of toggle signature verification.
Just turn it off.
there u go and install bumblebee rom.
Click to expand...
Click to collapse
I mistook the android recovery for CWM recovery..
I now managed to install bumblebee rom but its now struck in homescreen after reboot.. Its not going in
karnan said:
I mistook the android recovery for CWM recovery..
I now managed to install bumblebee rom but its now struck in homescreen after reboot.. Its not going in
Click to expand...
Click to collapse
I restored my original rom from my sd card backup folder... i installed bumblebee again.. and hola it worked..
I'm not sure if this was the reason for the problem..May be I'm toooo dumb! My mobile was charging when I installed bumblebee the first time..
While installing any custom must check if it have a file named boot.img
For proper and detailed knowledge refer to this thread
Link: http://forum.xda-developers.com/showthread.php?t=2382424
Sent from my Micromax A110 using xda premium
karnan said:
I rooted my phone today using "Bin4ry for Root A110 By sagarwep". I downloaded and put Bumblee rom in my SD card and tried to apply it through CWM Recovery. But I get the "Signature Verification Failed" Installation Aborted. I googled about this problem, and people have suggested to turn of signature verification in the advanced options menu in CWM Recovery, but there is no advanced options in my version of cwm recovery. Please someone help me to overcome this problem and install Bumblebee rom!
Thanks in Advance
your phone is not rooted dear..if u r on ics den dis binary tool works..but if u r on jellybean it dowsent work..u hv to install cwm wid sp tools den u can root your mobilke..after done dis things..u r ready to go with any rom u want..
go ahead..good luck
Click to expand...
Click to collapse
REX340 said:
karnan said:
I rooted my phone today using "Bin4ry for Root A110 By sagarwep". I downloaded and put Bumblee rom in my SD card and tried to apply it through CWM Recovery. But I get the "Signature Verification Failed" Installation Aborted. I googled about this problem, and people have suggested to turn of signature verification in the advanced options menu in CWM Recovery, but there is no advanced options in my version of cwm recovery. Please someone help me to overcome this problem and install Bumblebee rom!
Thanks in Advance
your phone is not rooted dear..if u r on ics den dis binary tool works..but if u r on jellybean it dowsent work..u hv to install cwm wid sp tools den u can root your mobilke..after done dis things..u r ready to go with any rom u want..
go ahead..good luck
Click to expand...
Click to collapse
You're right! I was thinking that my phone's recovery menu was cwm but I realized it wasn't cwm only after a while. I installed cwm and flashed the rom.. Now I have Bumblebee rom running on my phone! Thank you very much for the help. This community is amazing! :victory:
Click to expand...
Click to collapse
I've installed bumblebee ROM 3.0 but my messages are all black.. I can't read anything.. I don't know what went wrong..
Sent from my Micromax A110 using xda app-developers app
CarefullLLLLL
karnan said:
I rooted my phone today using "Bin4ry for Root A110 By sagarwep". I downloaded and put Bumblee rom in my SD card and tried to apply it through CWM Recovery. But I get the "Signature Verification Failed" Installation Aborted. I googled about this problem, and people have suggested to turn of signature verification in the advanced options menu in CWM Recovery, but there is no advanced options in my version of cwm recovery. Please someone help me to overcome this problem and install Bumblebee rom!
Thanks in Advance
Click to expand...
Click to collapse
Be careful, If you have wrongly tried something your device might have got bricked and you need to pay hefty amount to recover back.
Please read the instructions and follow the instructions before trying anything new.
I believe there is step by step videos available on youtube to root and install CWM on MMX A110
[email protected] said:
Boot into cwm.
Go to install zip from sd card and there u will find an option of toggle signature verification.
Just turn it off.
there u go and install bumblebee rom.
Click to expand...
Click to collapse
How to boot into CWM ? when i select boot into recovery mode the stock android recovery mode comes up.
WhiteSanta said:
How to boot into CWM ? when i select boot into recovery mode the stock android recovery mode comes up.
Click to expand...
Click to collapse
then you will have to first flash any custom recovery
[email protected] said:
then you will have to first flash any custom recovery
Click to expand...
Click to collapse
CWM doesnt have one for my device. Mine is Micromax A68
I want to install dolby in my micromax q381 bt in recovery it is showing e signature verification failed .... what to do
Help!!
Did anyone find the solution ??
I am facing the same problem...
Related
Presenting CWM Recovery v5
Hi Friends, Here is the download link...
CLICK HERE (Eclair 2.1) with 2.6.29 Kernel
MD5 checksum 37d712d4b8fb3856cd68ffd7147ac9d7
Click to expand...
Click to collapse
Please test this recovery for new A60 devices purchased in 2012
Click here to downlaod New (25th April)
Follow the below procedure to install.
Click to expand...
Click to collapse
How to install... Better instructions here for novice..
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Purpose of this recovery...... I can see only few... To clarify others doubt...
1. We can utilize latest format of updater/update scripts... while flashing....
2. It does backup of sd-ext also.. not sure if u hv observed for v2.5 or not...
3. Better and faster....
4. Most important... A recovery have nothing to do with any ROM... so it's 2.1 or 2.2 or 2.3... Its sole purpose is to backup the partition
Click to expand...
Click to collapse
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
CwM Recovery v5 for Froyo 2.2.1
Here is the link for A60 Froyo 2.2.1 users.....
CLICK HERE (Froyo 2.2.1) with 2.6.32 Kernel STILL WAITING FOR CLARO TESTERS... LINK IS FALSE NOW
Click to expand...
Click to collapse
Installation Procedure remains same as mentioned above.....
CLARO USERS RECOVERY IS UNDER TEST.. NEED MORE TESTER FOR CLARO
Click to expand...
Click to collapse
Cheers.... Njoy.... & Thank....
For those who are using the recovery for first time
1. Root ur phone. check here
2. install busybox from market.
3. Install "recovery manager".. check there is a "recoveryy" folder on ur sd card is created.
4. Download the latest recovery or the v2.5 recovery.. links on my signature..
5. place the downloaded recovery in "recoveryy" folder and flash it via recovery manager..
For those recovery 5 isn't work.. try v2.5 recovery first..
Follow the instruction carefully...
A better way of doing this on the way.. stay tuned...
ngage_me said:
Planned to post for eclair, froyo..
and also for claro users....
Click to expand...
Click to collapse
It was long time awaiting development from your side..Good work again, keep going.........
????
ngage_me, this recovery will enable us to run gingerbread on our fones or something else, thanks for the development, I have already clicked the thanks button.
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
link ?
dude when are you going to post the link ? and i have clicked on thanks !
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
bro where is the link bro i am the most happiest man if this recovery works perfect in our a60 really thanks a lot bro
Sorry for d delay friends......
I did tested things.. nd all work fine.. jst usb toggle isn't work this time again..
it's detecting my sd-ext partition too... since i don't hv anything on sd-ext not sure if it will take backup.. for first few test it hvn't created any backup...
so just wanted to double sure before i post here.. that you guys don't loose ur valuable data of sd-ext..
so please b patient...
I'll upload it tonight......
@ngage_me-yes you did that again by making a new recovery as u made earlier, just one bug as you said in the mount corner except everything is fine........
confirmed successful flashing with android download tool on micromax a60.
thanks,I successfully flashed cwm recovery v5.0.2.8 using recovery manager.apk
Sent from my HTC Explorer A310e
@ngage_me
Awesome work!!!
Built from source??
Btw can I get recovery.fstab of this??
Sent from my Micromax_A70 using Tapatalk 2 Beta-4
Stuck at Micromax Screen
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
awesome
bro really awesome bro downloading will reply in a while i already cliked thanks yesterday itself anyway thanks a lot bro
---------- Post added at 04:49 PM ---------- Previous post was at 04:31 PM ----------
bro your recovery is great can u please post me the backup.img files of the 2.1 eclair rom bro please i need them to flash it from the android download tool please help me bro
@nagae_me--please help me bro
rohan.sankhe said:
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
Click to expand...
Click to collapse
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Congrtzzz.....
ngage_me said:
Presenting CWM Recovery v5
How to install...
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
hey ngage_me....its another grt work from u dude.....u rockzzzzz..........and tanx for upgrading us frm stone age.......
--------------------------------------------------------
Juz click thanx if u liked this post...!!!
small problem bro
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Suggestion....
sridz.y.j said:
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Click to expand...
Click to collapse
OK cool!!! seems u messed of few things...
Try factory reset from recovery....
else
follow this... (2.1 original rom)
1. download full dump, link available in signature..
2. In case Android tool is detecting ur phone gr888.. just flash all the image available in the zip... MAKE SURE U HIG ERASE CHECK BOX WHILE FLASHING..., else first install the usb driver available in zip...
3. then repeat the step 2.
i sure ur phone will be back on working.... u can directly flash this recovery instead of using stock recovery from zip...
later u hv all options to using ny other rom...
Cheers!!!...
And yeah sorry for d delay.. i ws out on a party yesterday...
ramyjec said:
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Click to expand...
Click to collapse
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
ngage_me said:
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
Click to expand...
Click to collapse
@ngage_me I am using Jet 2.1 (froyo one) and yours froyo recovery is not working (not installing through ARM 11 and if installed using recovery manager it stucks in micromax logo when going into recovery), but eclair recovery is working I have taken backup from it and everything sceems fine even sd-ext was backedup.
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Go into recovery mode by first switching off your device. Then press volume up, down and power button all together to go into recovery when light flashes. Then you can try flashing stock rom and see what happens after that
OR
follow this guide
http://d-h.st/pt2
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Hey Just Go to Recovery Mode Again and Do a Data Reset...
Thats all..
If you have bricked your phone you can flash it using sp flash tool with the stock rom.
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
I had the same probelm!!
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
mayur.3.92 said:
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
Click to expand...
Click to collapse
Write ur imei by own.. how plz visit dis linkandroidforums.com/a75-all-things-root/542716-how-unbrick-a75-if-bricked-using-recovery.html
Sent from my Cynus T2 using xda app-developers app
Thanx but what about no am error being showed up as open wifi network
plz help stuck at recoverymode
imridul said:
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
Click to expand...
Click to collapse
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/showthread.php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/showthread.php?t=1960080 check the first post for the Stock V2 ROM
similar issue ,
Let me try what VipinKC says
un brick
ravee1010 said:
similar issue ,
Let me try what VipinKC says
Click to expand...
Click to collapse
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
vjdsivakumar said:
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
Click to expand...
Click to collapse
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
nice
ravee1010 said:
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
Click to expand...
Click to collapse
nice work enjoy
Bricked a110
Guyz, i recently installed CWM on my a110, but somhow while testing the features, i installed 12 mp patch and rebooted the phone. But it got stuck on the boot screen. And then i again went to CWM and done all this:
Fomat Data
Format System
Format Cache
And now its just hanged on to boot screen and am afraid that i have just done the biggest mistake.
Any help will be very thankful..
Plzz Reply Fast...
Similar but Different Problem
I may have a similar problem, big bros. Please check this thread. Sorry for bothering. I really need help.
http://forum.xda-developers.com/showthread.php?p=53004045
use
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
SP tool and flash stock rom through sp tools
If u have nandroid backtup then restore it
Sent from my A250 SUVI ROM v16 AURA using XDA Premium 4 mobile app
Hi Guys , I have a Micromax funbook p560 (Android ICS 4.0.4) . I have rooted it already but unable to install clockwalkmod recovery. I have tried everything but it only boot into old recovery " android system recovery <e3> "..
I have already used lots of thing to install CWM recovery but nothing works.
Then I found from terminal that "/dev/block/nandg" is not there in /dev/block/ folder...
There is only mmcb1k0, mmcblk0p1 to mmcblk0p21 files (which i think responsible for recovery mode ) & loop files
So the bash script was not worked...
So kindly help me on this so that I can install CWM recovery.
Rooting Process
Can you post a thread about rooting the tablet.
Thank You.
rijul.riddhiman said:
Can you post a thread about rooting the tablet.
Thank You.
Click to expand...
Click to collapse
There are already lots of rooting tutorial available here . So whats the point of writing another one ?? As you are a senior member here so I cant understand what u actually want from me... I will be very happy if i can help you or help this community in anyway.
And do you get my point in the thread that I have posted .?? can you help me on this please.
Thank You
deepdbest said:
Hi Guys , I have a Micromax funbook p560 (Android ICS 4.0.4) . I have rooted it already but unable to install clockwalkmod recovery. I have tried everything but it only boot into old recovery " android system recovery <e3> "..
I have already used lots of thing to install CWM recovery but nothing works.
Then I found from terminal that "/dev/block/nandg" is not there in /dev/block/ folder...
There is only mmcb1k0, mmcblk0p1 to mmcblk0p21 files (which i think responsible for recovery mode ) & loop files
So the bash script was not worked...
So kindly help me on this so that I can install CWM recovery.
Click to expand...
Click to collapse
You mean you want to make cwm your default, you might need to flash a custom kernel. Else you can flash cwm.zip via your stock recovery and enter cwm recovery and use it for everything you need.
deepdbest said:
........do you get my point in the thread that I have posted .?? can you help me on this please.....
Click to expand...
Click to collapse
i was searching for a solution for a friend who owns this device. he can't get either 3G sim or netsetter dongle to work on this. then, i saw this page: Upgrade/Update Micromax Funbook 3G P560 to 4.1 Jelly Bean. says something in there about using rom manager app to install cwm recovery.
post the results, if you try. include steps you followed to root and also link to the cwm recovery file.
btw, can anyone help with getting BSNL 3G SIM Card and MTS Huawei EC1561 dongle to work on this device? thanks.
haridevil99 said:
You mean you want to make cwm your default, you might need to flash a custom kernel. Else you can flash cwm.zip via your stock recovery and enter cwm recovery and use it for everything you need.
Click to expand...
Click to collapse
Yes that is the what only can work ... I think some boot script overlap cwm with stock recovery...
So I tried CWM.zip file flashing through stock recovery and it boot into cwm but Interface is very large and many error pops up...(like /cache not found .. etc etc )
thats all because of the partition related... wrong mount points in recovery.fstab file in cwm.zip.
So I edited that file with my correct mount points....... but signature got broken .. &
I'm not able to flash the new Edited CWM.zip file, as stock recovery refuses because of signature error..
So is there any way to edit recovery.fstab file in CWM.zip without breaking signature or re-signing it ???
Kindly tell me .. It will be very helpfull..
Is there anyone using funbook 3g P560 with working CWM. I dint find anything bout it.. All having the same issue I think..
So Please help me on this....Thanks
Is anyone there can help me ???
what are the possible blocks for recovery ics 4.0.4 ???
Thanks
deepdbest said:
Hi Guys , I have a Micromax funbook p560 (Android ICS 4.0.4) . I have rooted it already but unable to install clockwalkmod recovery. I have tried everything but it only boot into old recovery " android system recovery <e3> "..
I have already used lots of thing to install CWM recovery but nothing works.
Then I found from terminal that "/dev/block/nandg" is not there in /dev/block/ folder...
There is only mmcb1k0, mmcblk0p1 to mmcblk0p21 files (which i think responsible for recovery mode ) & loop files
So the bash script was not worked...
So kindly help me on this so that I can install CWM recovery.
Click to expand...
Click to collapse
iam useing funbook p560 i don't know how to root can u please tell me how to root ?????????.
My device is rooted... but can not install cwm recovery... when I'm installing it with rom manager, it shows installation completed... but... when I reboot my device into recovery mode.. 3e is openning... I'm unable to install clockworkmod recovery.. please help me....
Sent from my Micromax P560 using XDA Free mobile app
Deleted
How to root micromax funbook 3g p560
rijul.riddhiman said:
Can you post a thread about rooting the tablet.
Thank You.
Click to expand...
Click to collapse
Hey, i have that tablet and have rooted it.
1. Download root master english.
2click root and follow what it tells.
3.download root checker.
4. Go in su binary it comes with it.
5. Give root permission to root checker and verify root in root checker.
6.its rooted but when you use a root apk a popup will come to allow root permission to that apk. If not then do the same check it in su binary.
hi guys , I have a penta is701c which I have rooted successfully.
I want to install a rom and for that I downloaded clockworkmod rom manager but it says that I need to setup a "custom recovery"
when I clicked on "install or update recovery", it said my device is not supportd and asked if I had installed a cwm based recovery manually
what do I do now?
ps: when I clicked yes it asked me which version - 2x + or 3x + so didn't know wat to do ..
arnavb8 said:
hi guys , I have a penta is701c which I have rooted successfully.
I want to install a rom and for that I downloaded clockworkmod rom manager but it says that I need to setup a "custom recovery"
when I clicked on "install or update recovery", it said my device is not supportd and asked if I had installed a cwm based recovery manually
what do I do now?
ps: when I clicked yes it asked me which version - 2x + or 3x + so didn't know wat to do ..
Click to expand...
Click to collapse
its normal bro....search the cwm for ur phone in google .... u l find and just flash it....
dont forget to press thanks
wait, do I need cwm for installing roms on my device or is it just required to keep your settings saved ?
on a side note are there any alternatives to cwm as I cant figure out how to use cwm for my device ..?
arnavb8 said:
on a side note are there any alternatives to cwm as I cant figure out how to use cwm for my device ..?
Click to expand...
Click to collapse
custom recoveries are the base for rooting and installing custom roms. I am quite surprised by how you managed to root successfully without installing a custom recovery.
My kind advice dont do anything without proper knowledge.
U can find clockworkmod recovery on the playstore
u can find all ur answers here in the xda forums
so read well before u flash
no dude , I got the cwm rom manage from the play store.. the trouble comes when I try to set up "custom recovery".. the thing is , cwm doesn't support my device and it requires me to manually install a cwm based recovery.. which I don't know how to do.. so any instructions on how to do that (or some alternative to cwm ) would be really helpful
thanks
arnavb8 said:
no dude , I got the cwm rom manage from the play store.. the trouble comes when I try to set up "custom recovery".. the thing is , cwm doesn't support my device and it requires me to manually install a cwm based recovery.. which I don't know how to do.. so any instructions on how to do that (or some alternative to cwm ) would be really helpful
thanks
Click to expand...
Click to collapse
then try installing the latest version suggested by the rom mangaer.
You could also try the twrp recovery. These recoveries support the rom manager
hope i helped
arnavb8 said:
wait, do I need cwm for installing roms on my device or is it just required to keep your settings saved ?
Click to expand...
Click to collapse
yu require cwm for installing roms bro...
roms are flashd through cwm
Rooting: Root access can be gained by using Framaroot app.
Download it From Attechment Below
1.Open the app.
2.Click on Boromir.
3.Click on Ok.
4.Reboot.
Your device is rooted and u can verify it by root checker app.
Flashing Custom Recovery:
You can flash CWM recovery by mobile uncle app from play store.
Download CWM Recovery From Attechment Below
Now put This recovery on root of Your Sd Card And Rename It To recovery.img
Now Open Mobile Uncle Tool Then Click On Recovery Update.
Then Choose Your Recovery And press Ok .
You Are Done
For custom Rom We will Work soon
Backup not working... Error: cannot mount /system !!!!
mayankgirdhar said:
Rooting: Root access can be gained by using Framaroot app.
Download it From Attechment Below
1.Open the app.
2.Click on Boromir.
3.Click on Ok.
4.Reboot.
Your device is rooted and u can verify it by root checker app.
Flashing Custom Recovery:
You can flash CWM recovery by mobile uncle app from play store.
Download CWM Recovery From Attechment Below
Now put This recovery on root of Your Sd Card And Rename It To recovery.img
Now Open Mobile Uncle Tool Then Click On Recovery Update.
Then Choose Your Recovery And press Ok .
You Are Done
For custom Rom We will Work soon
Click to expand...
Click to collapse
Bro, I'm gtng an error while backing up data,, cannot mount /system
appreciate if you could help me
cwm not working
i m flash my karbonn s5 plus this cwm but this is not working so plzz send me original cwm for karbonn s5 plus
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
plzz help
any one backup cwm karbonn s5 plus
plzz helps me admin
i m flash my karbonn s5 plus this cwm but this is not working
so plzzz upgrade recovery plzzzzzzz
'Prasad Rulzz' said:
Bro, I'm gtng an error while backing up data,, cannot mount /system
appreciate if you could help me
Click to expand...
Click to collapse
+1 have the same problem
when i try mount /system partition "by hands" the same error
viber.ua said:
+1 have the same problem
when i try mount /system partition "by hands" the same error
Click to expand...
Click to collapse
Do any of you have stock recovery img? if yes I can probably help you guys
no i don't have, i find solution.
This version is 6.0.4.4 I reinstall early version 5.5.0.4. Back up working.
viber.ua said:
no i don't have, i find solution.
This version is 6.0.4.4 I reinstall early version 5.5.0.4. Back up working.
Click to expand...
Click to collapse
hey can you plz post the 5.5.0.4 recovery.img
thanks :good:
Andriod 17 said:
hey can you plz post the 5.5.0.4 recovery.img
thanks :good:
Click to expand...
Click to collapse
http://www.mediafire.com/download/2umind73ro54hm6/karbonn-s5+plus-cwm.img
viber.ua said:
http://www.mediafire.com/download/2umind73ro54hm6/karbonn-s5+plus-cwm.img
Click to expand...
Click to collapse
What tool do you use to overwrite the 6.0.4.4 with this one?
Andriod 17 said:
What tool do you use to overwrite the 6.0.4.4 with this one?
Click to expand...
Click to collapse
Read top of topic there are user manual how to root and how to install CWM (via Mobile Uncle Tools).
Just put on sd new recovery.img and install.