Related
This thread is opened to troubleshoot the HONOR issues and find ROM links at one post because there is no dedicated thread for this great phone
RESPECT THE DEVELOPER AND XDA THEY WILL RESPECT YOU
HUAWEI HONOR INTRO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model U8860
Platform Android 2.3
Band WCDMA/HSPA+ 900/2100 MHz; GSM 850/900/1800/1900 Transfer Rate HSPA+ DL 14Mbps/UL 5.76Mbps
CPU 1.4GHz
Weight 135g
DisplaySize 4.0 inch
Resolution FWVGA( 854x480 pixels)
Camera 8Mega-pixels AF HD camera & 0.3Mega-pixels camera
Memory 512M RAM+ 4G ROM
Extended Up to 32GB micro SD
USB Micro USB 2.0
Wi-Fi 802.11b / 802.11g / 802.11n
Bluetooth Bluetooth 2.1 / Bluetooth stereo (A2DP)
AGPSSensors Accelerometer sensor Proximity sensor Ambient light sensor Gyro Compass Battery*Capacity 1900mAH
VIDEOS
"http://www.youtube.com/watch?v=PAIz7_-Wj1E"
ROMS LINKSThere are CUSTOM' ROM! USE AT YOUR OWN RISK!!!
OFFICIAL ROMS
ICS V4.0.3
http://www.huaweidevice.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDUwOTg=
GB V2.3.6 OLD(since the the file is not available in Huawei website download in MF)
http://www.mediafire.com/download.php?knktzjxik9y5aot
http://www.mediafire.com/download.php?8u2fjh32ralmcrl
http://www.mediafire.com/download.php?ogb52kgtaj71jdt
GB V2.3.6 updated
http://www.huaweidevice.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDY2NTM=
UNOFFICIAL ROMS
MIUI OFFICIAL CHINA based on V4.0.3
Language Support : ENGLISH/CHINA
"http://bigota.d.miui.com/2.6.29/miui_Honor_2.6.29_8a66d3c1f1_4.0.zip"
MIUI UNOFFICIAL US based on V4.0.3
Language Support : ENGLISH
"http://roms.miui.us/2.7.6/MIUI.us_Honor_v4_2.7.6_Eng_Deo_ZipA_Signed.zip"
SHENDU OFFICIAL V1.0 based on 2.3.7
"http://download.shendu.com/downloads/shenduos/u8860/ShenDu-u8860-v1.0RC-120708.zip"
DEVELOPERS ROMS
MIUI by doc3000 based on 2.3
http://forum.xda-developers.com/showthread.php?t=1596442
CM7 by geno
1, using the latest CM7 source compiler, Chinese missing part finished by the individual, the translation of less than forgive
2, using self-compiled kernel, a number of optimization, turn on more features, the default overclocking (1.4G), can be overclocked to 1.9G
3, adding a personal enhanced script
4, all functions are normal, the FM does not work, front camera upside down (can be placed horizontally normal video)
5, by adding the RE Manager, ING market (do not like to handle)
6, google the addon, add the AGPS server (commonly known as GPS acceleration)
"http://dl.dbank.com/c09vwre63u"
ICS ROM REDUCED-V-4.0.3
This ROM is based on Huawei's official 4.0.3 production, add ROOT permissions, RE File Manager.
ROM does not do the depth changes, but in streamlining procedures.
1, ROM version of the Android ICS 4.0.3;
2, delete the Huawei comes with a lot of applications, leaving only the Huawei input method;
3, comes with the Google calendar, contacts, update plugins;
4, the desktop Google native desktop programs;
5, support the Root;
6 the update RootExplorer to the latest version;
7, add the application market;
8, remove the extra language files;
9, streamline off the excess in other countries TTS voice files;
"http://dl.dbank.com/c0qt17lblh"
U8860 ROM by Geno V3based on 2.3.6
A substantially streamlined, joined boot optimization script
(2) open the HDR camera, Task Manager, use habits
3 Huawei desktop overall official interface can modify the
4 The kernel is the default super-1G, the stand-down back 245m
Off by default keyboard light, you can delete boot script to restore
6.fps not unlock the machine looking for the glory of the final version of the post in July to see how to unlock
Not integrated input method
8.Email does not recommend removing, or point to add new accounts will restart stuck
Support the dual system (not to say that this brush becomes a dual system, you must first have a dual system partition, and then brush this will automatically identify the current partition)
Brushing machine to restart the browser HD support me click on the built-in dolphins can enter the interface do not like to directly deleted.
If you can not, please read the Brush Brush Description:
To the official 2.3 (B522, B518) and successfully ROOT, replace recovery5.0.27,
1 will download the zip Brush package do not extract directly into the SDcard
Hold the volume up + power button is turned on, do not release until well into the recovery mode, enter the advanced mode - reboot to recovery
Recovery, the volume up and down keys / menu Home key to move up and down the power button / Search button to confirm the back key to return to the previous menu level.
Select "Clear all data recovery factory
Select from the SD card, select the Brush package "
6 re-election to select the ZIP file from the SD card "
7 to find just download the zip Brush package confirmed
8 confirmed, Brush, wait about 1 minute to complete.
After brushing, back to the first menu, select "immediately reboot the system restart the phone
"http://dl.dbank.com/c0y9yfx5le"
U8860 ROM by Bones V1 1.4 based on 2.3.6
ROM size: 81.78MB
Android version: 2.3.6
UI type: Android native
Suitable for models: Huawei U8860
Update date :2012-02-23
"http://dl.dbank.com/c06a9zaty3"
INSTALLATION HOW TO INSTALL OFFICIAL/STOCK ROM
find the PDF attachment below for step by step procedures
HOW TO ROOT OFFICIAL/STOCK ROM
1. Download the file in the attachment (UPDATE.RAR)
2. Extract u get (update.app)--> Create a folder in SDcard by name "dload" copy update.app in the folder
3. go to Settings --> SDCARD --> SOFTWARE UPDATE --> UPDATE then restart
4. Download SuperOneClick.rar --> extract (below link)
5. start SuperOneClick.exe --> connect the phone to pc via USB cable
6. Click root -- > DONE ENJOY ur device is rooted
http://www.mediafire.com/?8a921g3bvq4uxp9
HOW TO INSTALL CWM V5
1. Download "recovery.img" form attachment
2. Install "Romtoolbox" free version form google market (need root to run)
3. Open the app --> Go to Rootbrowser --> find ".cust_backup" folder --> open "image" folder
4. Rename "recovery.img" to "recovery_backup.img"
5. Copy the downloaded version of "recover.img" and paste in "image" folder (step3)
6. Exit the app --> Switch Off
7. Press "power on" button while holding "volume up"
done u got cwm V5 enjoy
IF U FIND THIS POST HELPFUL CLICK THANKS AND VOTE OR U CAN ALSO DONATE
MORE TO COME ON TROUBLE SHOOTING WILL UPDATE THIS POST FREQUENTLY
i think there is one similar thread here : http://forum.xda-developers.com/showthread.php?t=1552038
how are the roms made by geno and bones wich one are better?
tropblaster said:
how are the roms made by geno and bones wich one are better?
Click to expand...
Click to collapse
still i am testing will edit the post soon for update,
tri_zet said:
i think there is one similar thread here : http://forum.xda-developers.com/showthread.php?t=1552038
Click to expand...
Click to collapse
Yes and there is already a wealth of information over there. I recommend this thread should be closed instead of having multiple threads acting as a main thread.
trekker99 said:
Yes and there is already a wealth of information over there. I recommend this thread should be closed instead of having multiple threads acting as a main thread.
Click to expand...
Click to collapse
hi everybody, unfortunately i've tried to install CWM5 reading information in this thread but my phone when start up give me image error and dont start.
i have used information point on point but brick my phone, please help me.
thank you
Always "Update failed"
I've tried all the different UPDATE.APP versions. And every one of them starts to unpack, and then, just as it's about to start installing,
I get a yellow warning triangle and an "Update failed" message.
Anyone experienced the same or know what to do with this?
I'd like to root the current 2.3.6 or upgrade to ICS or something, but everything just fails
The phone is totally stock from manufacturer, I haven't flashed or done anything.
System information:
Android version: 2.3.6
Build number: U8860V100R001EURC00B875
Kernel:2.6.35.7-perf, [email protected]#1
Any hints or help will be greatly appreciated!
giovandry said:
hi everybody, unfortunately i've tried to install CWM5 reading information in this thread but my phone when start up give me image error and dont start.
i have used information point on point but brick my phone, please help me.
thank you
Click to expand...
Click to collapse
download stock rom, take out the sd card connect to pc through some card reader create dload folder extract the downloaded stock rom in the dload folder put back the sdcard, start your phone while holding up & down volume button
mlysgaard said:
I've tried all the different UPDATE.APP versions. And every one of them starts to unpack, and then, just as it's about to start installing,
I get a yellow warning triangle and an "Update failed" message.
Anyone experienced the same or know what to do with this?
I'd like to root the current 2.3.6 or upgrade to ICS or something, but everything just fails
The phone is totally stock from manufacturer, I haven't flashed or done anything.
System information:
Android version: 2.3.6
Build number: U8860V100R001EURC00B875
Kernel:2.6.35.7-perf, [email protected]#1
Any hints or help will be greatly appreciated!
Click to expand...
Click to collapse
download stock rom B866 then install and try to root stock rom 2.3.6 or just normally install ics
trekker99 said:
Yes and there is already a wealth of information over there. I recommend this thread should be closed instead of having multiple threads acting as a main thread.
Click to expand...
Click to collapse
if u want to close your most welcome
I'm having issues :/ I can't seem to get my old number off my phone :/ I live in the middle of no where and I can't get my old phone number off my phone. Ideas?
Sent from my Inspire 4G using xda premium
Does the custom recovery.img (in the attachements' section) work for ICS ??
The answer is just yes or no.
THANK YOU!
Please update this thread with newer roms
[email protected] Mod V2 [clear edition]
4.2.2 [ROM+KERNEL 3.0.87][LINARO] SLIMBEAN 8.0 | SALUT HALO! (MAJ)
greatkhali123 said:
HOW TO INSTALL CWM V5
1. Download "recovery.img" form attachment
2. Install "Romtoolbox" free version form google market (need root to run)
3. Open the app --> Go to Rootbrowser --> find ".cust_backup" folder --> open "image" folder
4. Rename "recovery.img" to "recovery_backup.img"
5. Copy the downloaded version of "recover.img" and paste in "image" folder (step3)
6. Exit the app --> Switch Off
7. Press "power on" button while holding "volume up"
done u got cwm V5 enjoy
Click to expand...
Click to collapse
Hi, i manage to change my recovery with this method but do it with TWRP 2.7.1.0, when i reboot i have this message :
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down.
Click to expand...
Click to collapse
i remove the battery put in place and push "Volume - Volume + Power" to have the purple screen but the directory doesn't mount.
I have a backup of original file (amss.mbm, boot.img, cust.img, EMMCBOOT.MBM, recovery.img) but i can't find a way to push into the phone with ADB command or with standard way.
I also try to push the dload directory of different version of official ROM (B866, B926, B924, B927, B919, B932) to an MicroSD card but it always end with an error at Step 2/2 (install) with this message :
Firmware update
Step 2/2
Install
Update failed
Click to expand...
Click to collapse
when i check my MicroSD card i have a new file in the dload directory called sd_update.log with this text inside :
Failure: OSBL°æ±¾Æ¥Åäʧ°Ü.
dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Click to expand...
Click to collapse
I search a long time to find a solution for this but don't find anything.
If somebody have a solution for this i really apreciate your help.
Links removed!
Killerdog said:
Hi, i manage to change my recovery with this method but do it with TWRP 2.7.1.0, when i reboot i have this message :
i remove the battery put in place and push "Volume - Volume + Power" to have the purple screen but the directory doesn't mount.
I have a backup of original file (amss.mbm, boot.img, cust.img, EMMCBOOT.MBM, recovery.img) but i can't find a way to push into the phone with ADB command or with standard way.
I also try to push the dload directory of different version of official ROM (B866, B926, B924, B927, B919, B932) to an MicroSD card but it always end with an error at Step 2/2 (install) with this message :
when i check my MicroSD card i have a new file in the dload directory called sd_update.log with this text inside :
I search a long time to find a solution for this but don't find anything.
If somebody have a solution for this i really apreciate your help.
Click to expand...
Click to collapse
i have the same problem with same result but now i'm looking for latest official firmware
i hear from someone if you have cwm you will be fine case you can reflash rom with it
links expired! hope to find new links.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello world !!!
I'm very happy to present you a project of a new kind : The RecoverX Project
The goal of this project is to gather ALL the recoveries for ALL android devices in ONE tool which install them on the devices. RecoverX is coded in C++ thanks to QtSDK and allow to install a recovery on more than 150 different devices !!!
You just have to select your phone and your recovery, to click "Install" and RecoverX does the rest, It's as simple as that
This program have been published on XDA News : Here and here
Behind this tool : over 120 - 180 hours of work, 4200 lines of code and +600 uses by day !!!
Here is the list of the recoveries which are available :
This program require different prerequesties, depending of your device
- Wether you need an unlocked bootloader to flash the recovery partition (and fastboot drivers on your PC)
- Wether you need root access and usb debugging activated (if busybox is not installed, RecoverX will ask you the permission to install it).
To boot in bootloader mode :
- Tape "reboot bootloader" in terminal emulator.
- Or shutdown your device, hold "Volume +", "Volume -" and press power button.
To boot in recovery mode (depending of the device) :
- Tape "reboot recovery" in terminal emulator.
- Or shutdown your device, enter in bootloader mode and select "Recovery".
- Or press back button when the device start.
- Or press volume button when the device start.
- Or tap the screen when the device start.
PS : On the first lauch, the download may fail, please, try to restart the program again.
DOWNLOAD
RecoverX is now available on Google Play : http://forum.xda-developers.com/showthread.php?t=2595072
RecoverX v1.6.9.0 : http://sybiload.shost.ca/recoverx/download.htmlSupported devicesMirror
FEEDBACK
emadido said:
Awesome Post
Thanks Alot
Need this tool very much
Click to expand...
Click to collapse
noradoor said:
And one thing I have to mention is that it allows me to install CWM on Neo V.
Because the auto-installer on Play Store doesn't support this one.
Many thanks to LED.:good:
Click to expand...
Click to collapse
geekynoob said:
If this works for Unlocked Bootloaders.. Thn this shud b made a sticky in my opinion..
Wonderful tool created By a wonderful Brain..
Click to expand...
Click to collapse
PREVIEW
Here is some screenshots
THANKS
The CWM team, for their recovery
The TWRP team, for their recovery
Amon_RA, for his recovery
nobodyAtall & Zihu for their based-recovery
Ansfer for his based-recovery
cray_Doze for his based-recovery
PvyParts, who have help me to fix the ICS support bug
If you have any suggestions or you want to report a bug, just write above this post.
The source code of RecoverX is available on the second post.
To finish, I can only anwer to PM on the week-end so... be patient !!!
PS : Donations are volunteer but allow me to spend more time on the project
Support
Help center :
http://sybiload.shost.ca/recoverx/help.html
The full changelog can be consulted here :
http://sybiload.shost.ca/recoverx/changelog.html
If you want a recovery to be added or updated, please fill this form :
http://sybiload.shost.ca/recoverx/form.php
My GitHub
https://github.com/sybiload/RecoverX
FAQ
Q- My device isn't supported !
A- Just use the form bellow to submit a request.
Q- The recovery is'nt installed even if RecoverX said 'Installation complete'
A- On some devices, the installation may fail even if the device is rooted, due to production builds, drivers issues..
Q- How to root my device ? How to install my driver ?
A- Just search on google and/or on XDA.
Q- Can you make a recovery for this device.
A- I'm not a recovery developper ! I've just created the tool who install them.
Q- I get error 7 ! Help me !
A- Just wait a while and try to disable your firewall. The server could be down or overloaded.
Q- I can't download RecoverX !
A- Idem
Q- I've lost my cat because of your software !
A- I can't help you
Reserved for future use
Here is video of RecoverX, enjoy !!!
Anyone tested it ???
I will add ClockWorkMod Recovery for this devices in v1.1 :
Xperia X10
Xperia X10 Mini
Xperia S
If you want me to add a recovery or a device, just post the thread mink to the recovery/device.
Awesome Post
Thanks Alot
Need this tool very much
is it require to have a root access or not??
@emadido : No problem, did you have tested it ??? If you have any questions or suggestions, do not hesitate !!!
@molimo : Yes, this tool require root access and locked bootloader to install the recovery in the /system/bin folder.
Did I answered your question ???
thnks for the nice tool
but is it need to ublock bootloader
on arc s to install any recovery ??
@ahmadzxc : No, this tool works also on locked bootloader but you need to be on 2.3 stock rom, to have root access and busybox on your device.
Did I answered you ???
LEDelete said:
@ahmadzxc : No, this tool works also on locked bootloader but you need to be on 2.3 stock rom, to have root access and busybox on your device.
Did I answered you ???
Click to expand...
Click to collapse
thanks for the replay
i have arc s and i rooted it
and it's now on ics 4.0.4
i thinks this will work too ??
is this running locked bootloaders?
Awesome and question
Hello!
Awesome stuff.
It is not working for me,here is the result:
Installing clockworkmod recovery...
Waiting for connection...
Push files to temp folder...
2096 KB/s (1945600 bytes in 0.906s)
1263 KB/s (59360 bytes in 0.045s)
38 KB/s (810 bytes in 0.020s)
2100 KB/s (735308 bytes in 0.341s)
Remount device (r/w)...
remount: not found
Copy files to system...
failed on '/data/local/tmp/recovery.tar' - Cross-device link
failed on '/data/local/tmp/charger' - Cross-device link
failed on '/data/local/tmp/chargemon' - Cross-device link
failed on '/data/local/tmp/sh' - Cross-device link
Chmod files...
Unable to chmod /system/bin/recovery.tar: No such file or directory
Unable to chmod /system/bin/charger: No such file or directory
Unable to chmod /system/bin/chargemon: Read-only file system
Unable to chmod /system/xbin/sh: Read-only file system
Installation complete. Press a key to reboot the phone.
(Xperia mini Rooted stock 2.3.4 rom,usb debugging,unknown sources enabled)
@celka : Hum, your device seem to not be rooted correctly because adb can not remount the device :
Remount device (r/w)...
remount: not found
However, I tried to solve the problem by remount the device by an other way and I publish a new version : RecoverX v1.1
Keep me informed if it's work !!!
Thanks in advance,
LEDelete
Have you changed the file charger? On ICS the false charger causes that the phone is in a bootloop wenn its switched off and a usb-charger connected. It couldn´t charge the battery.
Source: http://forum.xda-developers.com/showpost.php?p=27140107&postcount=1
Sorry for this Question but i have seen that your charger file has an old timestamp. I´m not able to test it because my phone is in service center.
@mangdasire : yes, it's work on locked bootloader.
@skuhn1978 : No problem, but this tool isn't for ICS because I didn't find a recovery compatible with ICS so I think the file "charger" works on 2.3.
But you seem to be informed about a recovery for ICS, can you give the the link ??? And did you know if my file "charger" works on Android 2.3 ???
Thanks for your usefull post !!!
Re-rooted my device and tried this new version, now everything was OK.
Big Thanks
LEDelete said:
@celka : Hum, your device seem to not be rooted correctly because adb can not remount the device :
Remount device (r/w)...
remount: not found
However, I tried to solve the problem by remount the device by an other way and I publish a new version : RecoverX v1.1
Keep me informed if it's work !!!
Thanks in advance,
LEDelete
Click to expand...
Click to collapse
LEDelete said:
@skuhn1978 : No problem, but this tool isn't for ICS because I didn't find a recovery compatible with ICS so I think the file "charger" works on 2.3.
But you seem to be informed about a recovery for ICS, can you give the the link ??? And did you know if my file "charger" works on Android 2.3 ???
Click to expand...
Click to collapse
I´m not a developer, i have learned such things by search google and try and error.
The recovery you use CWM 5.0.2.7 should work in ICS only thing is you must replace the charger-file. If charger works in ICS and GB must someone try.
I saw it that the recovery works in ICS because i installed the APP http://goo.gl/XurYt before it was updated for ICS, only change the charger file and it worked perfectly. Now the APP is updated to ICS, you can install it it will create a folder naa... on your SDCARD with the CWM recovery files.
celka said:
Re-rooted my device and tried this new version, now everything was OK.
Big Thanks
Click to expand...
Click to collapse
So you mean RecoverX has installed the recovery correctly on your phone, no ???
Can you confirm it's work, thanks.
@skuhn1978 : Thank you very much, I will add the charger file for ICS in the next version. Thank you very much for your contribution and if you notice an other thing, do not hesitate !!!
ahmadzxc said:
thanks for the replay
i have arc s and i rooted it
and it's now on ics 4.0.4
i thinks this will work too ??
Click to expand...
Click to collapse
what about that people ?!!
LEDelete said:
So you mean RecoverX has installed the recovery correctly on your phone, no ???
Can you confirm it's work, thanks.
@skuhn1978 : Thank you very much, I will add the charger file for ICS in the next version. Thank you very much for your contribution and if you notice an other thing, do not hesitate !!!
Click to expand...
Click to collapse
Yes,it works.I made a backup with it, later will try to install cm7
Micromax Funbook Infinity - P275Development & Hacking
HOT NEWS : CyanogenMod 10 or CM10 (Jellybean) is available for Funbook Infinity P275 and you can install from HERE
This thread is dedicated to Micromax Funbook Infinity P275 as there is no specific forum for it. This deals with Root, CWM, Roms, Mods, etc. You may also share if you found something new about this device...
INDEX
|
|------- About Device
|------- Parts Of The Device
|------- Specifications (HW)
|------- Rooting/Unrooting
|------- CWM Recovery
|------- Installing ADB Drivers
|------- Mods & Apps
|------- LiveSuit Guide
|------- Roms
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Micromax Funbook Infinity P275 is a Android Full touch bar, based on the ARM Cortex-A8 architecture,collocation Android4.0.3 operating system.P275 provides MP3/MP4 player, camera, camcorder, voice memo. Built-in WiFi function, supports Web surfing and email, bring you perfect Internet, social, email and shopping experience. P275 supports connectivity as WIFI, T-flash card, UART and USB2.0 OTG
Specifications:
HardWare :
Design :
Dimension : 26x209x11.2 mm
Weight : 460g ( Including Battery )
Form Factor : Android Full Touch Bar
Antenna : FPC Antenna
LCD :
Display : 7”,800 x 480,TFT LCD, 16.7M Color
Panel type : Capacitive 5 Multi Touch
Camera :
Image Sensor : CMOS
Resolution : Front 0.3MP / Rear 0.3 MP
Focus : Front FF / Rear FF
Digital Zoom : x4
Optical Zoom : Non
Motion JPEG : Yes
Camcorder : Yes
Flash : No
Video :
Sound Format : Support up to HD 2160P; Support AVI, MPG, MKV, RM, RMVB, MP4, MOV, VOB, DAT, FLV, TS, 3GP, WEBM(VP8), etc. 1080p decoder
Video Steaming : RTSP/SDP over TCP; RTP/RTCP over UDP
Video output : Non
(HDMI)
Audio :
Sound Format - Encoding : Yes
Sound format - Decoding : MP1、MP2、MP3、WMA、WAV、OGG、OGA、APE、FLAC、AAC、M4A、3GP
Ringtones : Yes (64poly MIDI, MP3)
MP3 playback : Yes (up to VBR)
Voice Memo : Yes
External Audio Jack : 3.5mm
Audio amplifier - AWINIC : Yes
Memory :
DDR RAM : 512MB DDR3
Nand Flash : 4GB
MicroSD : Upto 32 GB
(T-flash)
Battery :
Standard 4,000mAh Li-ion
Extended Non
Connectivity :
RS232C : Non
USB 1 Mini : USB OTG,
IrDA : Non
IrRC : Non
Bluetooth : Non
Wi-fi 802.11: b/g/n
Other Options :
Travel charger Adapter : Yes
USB Data Cable : Yes
USB adapter : Yes
Ear – Microphone : No
Motion Sensor : Yes (3-axis supportable)
z
Rooting Funbook Infinity P275
Rooting & Unrooting Funbook Infinity P275
Android rooting is the process of allowing users of smartphones, tablets and other devices running android to attain privileged control (known as "root access") within Android's subsystem.
There are two methods for rooting our Funbook Infinity :
1) Root Many Android! by Bin4ry
2) Super One Click by CLShortFuse
Both are very easy methods, but I prefer using Universal Rooting Script by Bin4ry. However, I will post how to root in both methods!
Preparing Funbook Infinity For Rooting :
1) On your infinity tablet, go to Settings- -> Developers options and tap on USB debugging to check (tick) the USB debugging on.
2) Connect the Funbook Infinity with your Windows Computer via USB cable.
3) If it is the first time that you have connected your tablet to your computer, then allow windows to Automatically Install the Drivers for you.
4) Change the Connectivity Option from MTP to Mass Storage in Settings --> Storage --> Options --> USB computer connection
If the drivers are not installed automatically then you nedd to install them manually. Go to 3rd post for the guide on installing ADB drivers manually.
Note : Remove your SD Card from your Tab.
METHOD 1 :
Root Many Android! BY BIN4RY
1) Download Root_With_Restore_by_Bin4ry_v31 : HERE or HERE [OP LINK]
2) Extract & Double-Click RunMe.bat
3) Follow the instructions
4) Connect your tablet to the computer.
5) Then, the program will ask you to go to the tablet and
tap Restore My Data. Do it.
6) Wait till it finishes. Your tablet will restart once.
7) Once the program is done, press Enter.
8) Your Funbook Infinity will be rooted.
METHOD 2 :
Super One Click by CLShortFuse
Note : The program requires Microsoft .NET Framework 2.0+ or Mono v1.2.6+
1) Download SuperOneClick Root v2.3 : HERE [ORI LINK]
2) Open SuperOneClick.exe
3) Click the Root button and wait for a few minutes.
4) You can select Yes, if you would like to test it.
5) Your Funbook Infinity will be rooted.
Unroot Your Funbook Infinity:
i) Use Root_with_Restore_v31
Select the Unroot Option from the list.
ii) Use SuperOneClick
Click on Unroot on the SuperOneClick.exe window.
z
CWM Recovery 6 For Funbook Infinity P275
ClockWorkMod Recovery
Screenshots in updated CWM recovery:
Prerequisite :
Your Funbook Infinity Must Be Rooted In Order To Install CWM.
Credits to dolorespark for posting this.
1) Downlad CWM_6028_P275.zipfrom HERE [Dev-Host]
and Novo_Tools.apk from HERE
2) Put both Novo_Tools_1_0.apk and recovery.img in /sdcard of your Funbook Infinity.
3) Install Novo_Tools_1_0.apk as a normal app.
4) Open NovoTools and grant SU (SuperUser) permissions.
5) Click Flash Recovery in NovoTools and wait for few seconds.
6) Next Click Enter Recovery in NovoTools and You will go to CWM Recovery 6.0.2.8.
Note :
i) If You Want to Go To Recovery :
ii) Switch Off the Tab.
iii) Press and Hold Home And Power Keys at the same time.
or
Use Novo_Tools.(Enter Reocvery option)
Note : This updated CWM reocvery contains the *** Go Back *** option which favours devices like P275 which doesn't sport back or volume rocker button.
Installing P275 ADB Drivers :
If your tab is not rooted, even after trying both Methods, then the problem must be the ADB drivers. Here is a guide for installing them.
1) First, download the P275-Drivers.rar from HERE [Dev-Host] and Extract it anywhere in your PC.
2) Go to Settings > Developer Options > (and tick) USB Debugging ON
3) Connect your tablet to your PC via USB Cable.
4) Open Device Manager (Seach in Start)
5) Under Other Devices, you will see Android with a caution symbol.
Note : If you do not see the Android with a caution symbol, then ADB drivers are already installed in your PC and you don't need to continue...
6) Right-Click on Android and select Update Drivers and a dialog box will appear. Select Browse my Computer for Driver Software
7) Browse for the folder that you extracted earlier and click OK.
8) A warning will appear. Click Install the driver software anyway.The ADB drivers will be installed.
9) The caution symbol will disappear and you will see Android Composite ADB Interface.
Guide by luvk1412 : Post #104
z
Roms & Mods For Funbook Infinity P275
MoDs & AppS
1) Remove Bloatwares
Download Link : http://www.mediafire.com/?oapdvt5n7hw47e4
About :
Type : Flashable Zip
Instructions : Flash In CWM
This will remove all the unwanted or bloatware apps from your Funbook Infinity.
List Of Apps : (will be removed)
-Apps.apk
-E-learning.apk
-Entertainment.apk
-Games.apk
-Livetv.apk
-Movies.apk
-mStore_P275_230812.apk
-Need For Speed The Run.apk
-Weather Widget Tab.apk
-Exchange.apk
-PlusOne.apk
-Tetris.apk
-LiveWallpapers.apk
2) Swap Internal & External SD Card
Thanks to luvk1412
Download Link : http://www.mediafire.com/?2gazncf5z2zx85y
Original Thread : http://forum.xda-developers.com/showthread.php?t=2066307
About :
Type : Flashable Zip
Instructions : Flash In CWM
This mod will swap your internal & external sdcards making your External SD card Internal and Internal SD card External. You can even have a mighty 32 GB internal memory with this mod...
3) Undo Swap Internal & External SD Card
Download Link : http://www.mediafire.com/?qt8ossi4iiyk2l3
About :
Type : Flashable Zip
Instructions : Flash In CWM
This mod will undo what you did in the above mod. This will reset if you swapped your SD cards.
LiveSuit Guide
Guide by EMOBlazeXD : http://forum.xda-developers.com/showthread.php?t=2326368
z
Thread Changelog :
Added advanced specs
Added two root methods
Added CWM recovery
Added Mods
Updated CWM recovery
Added guide for instaling drivers
Things to expect :
Livesuit guide
More CooL Mods
Mod to deodex custom rom
Detailed guide with pictures for installing drivers
CM10 rom (under development)
will the above mod work on p275?
Ganesh A said:
last one
Click to expand...
Click to collapse
will the above mod work on p275?
arunanson said:
will the above mod work on p275?
Click to expand...
Click to collapse
Yes, I tested and only posted here...
Ganesh A said:
Yes, I tested and only posted here...
Click to expand...
Click to collapse
Found Original ROM!
LiveSuit flashable
Some good-guy-greg was generous enough to post a link to Micromax FTP servers, intended for Service Technicians.
And voila! There was livesuit Image for every single micromax tabs.
I am currently downloading it (78%@ 150k).
FTP
Username/Pswd:https://docs.google.com/file
:good:
You guys download it too, as a security.... Who knows when micromax bar this user..
:angel:
Thnks I will add it to my thread...
Sent from my GT-S5360 using Tapatalk 2
Prashnts said:
Found Original ROM!
LiveSuit flashable
Some good-guy-greg was generous enough to post a link to Micromax FTP servers, intended for Service Technicians.
And voila! There was livesuit Image for every single micromax tabs.
I am currently downloading it (78%@ 150k).
FTP
Username/Pswd:https://docs.google.com/file
:good:
You guys download it too, as a security.... Who knows when micromax bar this user..
:angel:
Click to expand...
Click to collapse
somehow i am not able to enter the server...its saying "530 User cannot log in."
Edit : Missed the "m" XD ..now able to log in! =)
Ok, guys...
Thread will be updated with some advanced specs and livesuit flashing guide...
FEEL FREE TO COMMENT!!!
Eagerly waiting for your custom rom
Ganesh A said:
Ok, guys...
Thread will be updated with some advanced specs and livesuit flashing guide...
FEEL FREE TO COMMENT!!!
Click to expand...
Click to collapse
Gr8 Efforts..
Keep up the good work...
Regards,
Amardeep Banga
pratap6789 said:
somehow i am not able to enter the server...its saying "530 User cannot log in."
Edit : Missed the "m" XD ..now able to log in! =)
Click to expand...
Click to collapse
I'd recommend to download early version, as the latest image is 600 MB+ and has some crap preinstalled..:good:
Prashnts said:
I'd recommend to download early version, as the latest image is 600 MB+ and has some crap preinstalled..:good:
Click to expand...
Click to collapse
Yeah, the V2 contains the Virint folder which will be copied to our sdcard...
But, the V2 is compatible with both the variants of Infinity..
Added Advanced Specs
Advanced Specifications Added Guys...
Check it Out...
Question
Ganesh A said:
Advanced Specifications Added Guys...
Check it Out...
Click to expand...
Click to collapse
I want know how to go back to the default Recovery, If I have to?
I am new to this, so please don't mind if its a stupid question.
Waiting for your reply.
Thanks,
amarbanga123 said:
I want know how to go back to the default Recovery, If I have to?
I am new to this, so please don't mind if its a stupid question.
Waiting for your reply.
Thanks,
Click to expand...
Click to collapse
In Stock Recovery, You can't do anything cause you cannot scroll...You can only reboot in stock recovery...
A person who never made a mistake never tried anything new.
- Albert Einstein
Thanks for a quick response
Ganesh A said:
In Stock Recovery, You can't do anything cause you cannot scroll...You can only reboot in stock recovery...
A person who never made a mistake never tried anything new.
- Albert Einstein
Click to expand...
Click to collapse
Thank you for a quick response.
But I want to know how to go back to stock recovery after installing CMW?
The only reason I think I will go back to stock is in situation where in I have to take the tab to the service centre.
Thanks,
amarbanga123 said:
Thank you for a quick response.
But I want to know how to go back to stock recovery after installing CMW?
The only reason I think I will go back to stock is in situation where in I have to take the tab to the service centre.
Thanks,
Click to expand...
Click to collapse
maybe ...just maybe ...flashing the image through livesuit might install the stock recovery...
(i am also new to this... do dont mind me )
amarbanga123 said:
Thank you for a quick response.
But I want to know how to go back to stock recovery after installing CMW?
The only reason I think I will go back to stock is in situation where in I have to take the tab to the service centre.
Thanks,
Click to expand...
Click to collapse
Just flash the live suit image to ur tab...
And it will be as u brought from the shop!
For livesuit instructions...
I will add it to this thread...
A person who never made a mistake never tried anything new.
- Albert Einstein
Hei friends this my second post on chinies karbonn A1+
Today im gonna show u show go back Stock rom
or
unbrick Karbonn A1+
And i hve made 2 parts Here 1. stock rom 2.stock rom rooted
So 1st how to get back to stock rom
lets start
fashing software: http://dc391.4shared.com/download/j...Tool_Latest.rar?tsid=20130515-043612-6c2b7d49
S/w link for New H/W version : 2.0.2 : http://www.sendspace.com/file/2b5snn
S/w link for Old H/W version : 2.0.3: http://www.sendspace.com/file/qch6va
How to flash:
select flashfile in flasher
power off set
stat ...connect cable.....and press power on
PART 2
So, let me try to explain the outcome of my work and how to flash the ROM into this device.
First of all, I want to say thanks to pogodancer for his help in my investigation and for providing me the software for flashing the device, as I couldn't get any version to work.
So, getting to the point, I have created 2 versions of the firmware:
Standard Stock ROM - Rooted
This is mostly a copy of the stock rom of the device with the following changes:
- SU binaries included
- SuperUser app added
As the ROM is rooted, you can now mount as RW the /system folder and change anything you want.
Link to the firmware:http://199.91.152.132/78ww1kb2rncg/4x9ra4y3e53isjf/6820_2.3.5_c910_hteng_s5_en_4.0_v01_Root.zip
Modded Stock ROM - Rooted
This is a modified version of the rom I have done to clean the device from unwanted and chinese software and to add some missing apps. Details are:
- SU binaries included
- SuperUser app added
- Ayu_Sales.apk (CAIVS) application removed
- Go Keyboard (and all its language plugins) removed
- Default Launchers (there were 2) and theme removed.
- ADW Launcher added
- GMail added
- Google Talk added
- Gallery3D substituted by Cool 3D Gallery
And that should be all.
Link to firmware:http://199.91.152.49/yseacg4cwdkg/8i3soi585vjvyfh/6820_2.3.5_c910_hteng_s5_en_4.0_v01_Mod.zip
Now, for the flashing software, the link to get it is: http://www.mediafire.com/?o9km8vl287ev24j
Instructions for flashing, from pogodancer, are:
Quote:
0. Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-v4-.rar".
1. Disable just in case your Win7 firewall.
2. Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
3. Start "ResearchDownload.exe" from package folder "ResearchDownload".
4. In ResearchDownload-application chose firmware with first button (for me: 6820_2.3.5_c910_hteng_s5_en_4.0_v01.pac).
5. Be sure that the Baudrate from Win7-Device-Manager-Comports-Settings in CHANNELSERVER equals the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115.200.
6. Press the Start (Play) button in ResearchDownload-application (third button).
7. Turn off the phone.
8. Keep holding the "- volume" key.
9. Without releasing the button "- volume" plug the usb-cord from phone to Win7 (install the driver if not done before in step 0).
10. The process of firmware-burning should start now in ResearchDownload-application and take approximately 1 Minute. You can release the Vol.Button once it starts.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Please note that I have flashed the phone it in a Windows XP virtualbox machine and I realized I didn't need the CHANNELSERVER application, so I went directly to step 3.
Cheers.
And my last post is coming soon ics for Karbonn A1+
After im moving to Sony Xperia Sp fourm
See u soon.........Bye:angel:
ch3than said:
Hei friends this my second post on chinies karbonn A1+
Today im gonna show u show go back Stock rom
or
unbrick Karbonn A1+
And i hve made 2 parts Here 1. stock rom 2.stock rom rooted
So 1st how to get back to stock rom
lets start
fashing software: http://dc391.4shared.com/download/j...Tool_Latest.rar?tsid=20130515-043612-6c2b7d49
S/w link for New H/W version : 2.0.2 : http://www.sendspace.com/file/2b5snn
S/w link for Old H/W version : 2.0.3: http://www.sendspace.com/file/qch6va
How to flash:
select flashfile in flasher
power off set
stat ...connect cable.....and press power on
PART 2
So, let me try to explain the outcome of my work and how to flash the ROM into this device.
First of all, I want to say thanks to pogodancer for his help in my investigation and for providing me the software for flashing the device, as I couldn't get any version to work.
So, getting to the point, I have created 2 versions of the firmware:
Standard Stock ROM - Rooted
This is mostly a copy of the stock rom of the device with the following changes:
- SU binaries included
- SuperUser app added
As the ROM is rooted, you can now mount as RW the /system folder and change anything you want.
Link to the firmware:http://199.91.152.132/78ww1kb2rncg/4x9ra4y3e53isjf/6820_2.3.5_c910_hteng_s5_en_4.0_v01_Root.zip
Modded Stock ROM - Rooted
This is a modified version of the rom I have done to clean the device from unwanted and chinese software and to add some missing apps. Details are:
- SU binaries included
- SuperUser app added
- Ayu_Sales.apk (CAIVS) application removed
- Go Keyboard (and all its language plugins) removed
- Default Launchers (there were 2) and theme removed.
- ADW Launcher added
- GMail added
- Google Talk added
- Gallery3D substituted by Cool 3D Gallery
And that should be all.
Link to firmware:http://199.91.152.49/yseacg4cwdkg/8i3soi585vjvyfh/6820_2.3.5_c910_hteng_s5_en_4.0_v01_Mod.zip
Now, for the flashing software, the link to get it is: http://www.mediafire.com/?o9km8vl287ev24j
Instructions for flashing, from pogodancer, are:
Quote:
0. Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-v4-.rar".
1. Disable just in case your Win7 firewall.
2. Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
3. Start "ResearchDownload.exe" from package folder "ResearchDownload".
4. In ResearchDownload-application chose firmware with first button (for me: 6820_2.3.5_c910_hteng_s5_en_4.0_v01.pac).
5. Be sure that the Baudrate from Win7-Device-Manager-Comports-Settings in CHANNELSERVER equals the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115.200.
6. Press the Start (Play) button in ResearchDownload-application (third button).
7. Turn off the phone.
8. Keep holding the "- volume" key.
9. Without releasing the button "- volume" plug the usb-cord from phone to Win7 (install the driver if not done before in step 0).
10. The process of firmware-burning should start now in ResearchDownload-application and take approximately 1 Minute. You can release the Vol.Button once it starts.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Please note that I have flashed the phone it in a Windows XP virtualbox machine and I realized I didn't need the CHANNELSERVER application, so I went directly to step 3.
Cheers.
And my last post is coming soon ics for Karbonn A1+
After im moving to Sony Xperia Sp fourm
See u soon.........Bye:angel:
Click to expand...
Click to collapse
it does not detect it...it says driver failed to install....even after manually installing drivers there is an exclamation mark
Can I flash this using CWM recovery? If no, then how to do this?
Sent from rooted Karbonn A1+
hey,i am gonna buy this fone
so can u tell if its batery backup is good?
DJDSB said:
hey,i am gonna buy this fone
so can u tell if its batery backup is good?
Click to expand...
Click to collapse
Dont buy any phone of karbonn or micromax. They have non robust chinese h/w and s/w.No proper updates. No services. Go for samsung galaxy series. Costly but worth a buy.
Sent from customized Karbonn A1+
Help needed!!!
Heyy dude can u make a flashable rom for new h/w version 3.0 coz my device is bricked.......
Could u pls provide me working link for flash software for 2.0.2 version. Of a1+.....
Pls sir......
Sent from my GT-N7000 using xda premium
dr.sanjaykumar16 said:
Could u pls provide me working link for flash software for 2.0.2 version. Of a1+.....
Pls sir......
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
This may help you...
http://www.moulnisky.com/index.php?dir=Karbonn/A1+/
Sent from my A1+ using xda app-developers app
Thanks for prompt reply
But I m not able to flash d firmware .....it simply keeps saying checking baudrate but nothing happens ....I hv selected 115200 in both settings nd channel server as advised in d guide..... pls help me in this regard
Sent from my GT-N7000 using xda premium
.::MAX::. said:
This may help you...
http://www.moulnisky.com/index.php?dir=Karbonn/A1+/
Sent from my A1+ using xda app-developers app
Click to expand...
Click to collapse
Hey bro I tried flashing v2.0.8 using research download but it says waiting..And it is stuck there forever!!!!!
---------- Post added at 01:49 PM ---------- Previous post was at 01:38 PM ----------
dr.sanjaykumar16 said:
Thanks for prompt reply
But I m not able to flash d firmware .....it simply keeps saying checking baudrate but nothing happens ....I hv selected 115200 in both settings nd channel server as advised in d guide..... pls help me in this regard
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hey dude open 2 instances of the channelserver then select the sci port on both instances of channelserver.i hope it helps...
Do I need any modified cable or normal usb cable wil n fine for flashing????
Pls help me in this regard ....I m stuckup wt a bootloop phone
Sent from my GT-N7000 using xda premium
dr.sanjaykumar16 said:
Do I need any modified cable or normal usb cable wil n fine for flashing????
Pls help me in this regard ....I m stuckup wt a bootloop phone
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Simple usb cable is just fine....
sent from my rooted a1+
No buddy still not able to flash stock rom...:banghead:
Same checking baudrate .....nd nothing happens
Sent from my GT-N7000 using xda premium
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
I m using the stock usb cable provided in box wt a1+
Sent from my GT-N7000 using xda premium
H/W 3.0.0
S/W 2.0.5 in bellow bettry
My phone is stuck on karbonn logo
Plz give me flashing software n firmwere
Thnks
Sent from my GT-N7000 using XDA Premium 4 mobile app
Is There Some Bug in this versions ?
sir i have a arise rowdy t1+ phone its board is sp6820gb_7620 and cpu id is 8810 cpu frequency is 1ghz and ram is 512mb with mali 300 gpu,
android version is 2.3.6 and kernal version is 2.6.35.7 [email protected] #7, software version is mocordroid2.3.6.w12.20_p20.01_20130715.130506, hardware version is 1.1.0. my problem is that my phone has only 128 mb of internal memory and when i tried to edit vold.fstab to swap its memory with memory card it stopped detecting sd card when turned on but when in recovery mode sd is shown present, i think its very similar to karbonn a1+ in hardware and software part so can you please help me with my phone?
ch3than said:
Hei friends this my second post on chinies karbonn A1+
Today im gonna show u show go back Stock rom
or
unbrick Karbonn A1+
And i hve made 2 parts Here 1. stock rom 2.stock rom rooted
So 1st how to get back to stock rom
lets start
fashing software: http://dc391.4shared.com/download/j...Tool_Latest.rar?tsid=20130515-043612-6c2b7d49
S/w link for New H/W version : 2.0.2 : http://www.sendspace.com/file/2b5snn
S/w link for Old H/W version : 2.0.3: http://www.sendspace.com/file/qch6va
How to flash:
select flashfile in flasher
power off set
stat ...connect cable.....and press power on
PART 2
So, let me try to explain the outcome of my work and how to flash the ROM into this device.
First of all, I want to say thanks to pogodancer for his help in my investigation and for providing me the software for flashing the device, as I couldn't get any version to work.
So, getting to the point, I have created 2 versions of the firmware:
Standard Stock ROM - Rooted
This is mostly a copy of the stock rom of the device with the following changes:
- SU binaries included
- SuperUser app added
As the ROM is rooted, you can now mount as RW the /system folder and change anything you want.
Link to the firmware:http://199.91.152.132/78ww1kb2rncg/4x9ra4y3e53isjf/6820_2.3.5_c910_hteng_s5_en_4.0_v01_Root.zip
Modded Stock ROM - Rooted
This is a modified version of the rom I have done to clean the device from unwanted and chinese software and to add some missing apps. Details are:
- SU binaries included
- SuperUser app added
- Ayu_Sales.apk (CAIVS) application removed
- Go Keyboard (and all its language plugins) removed
- Default Launchers (there were 2) and theme removed.
- ADW Launcher added
- GMail added
- Google Talk added
- Gallery3D substituted by Cool 3D Gallery
And that should be all.
Link to firmware:http://199.91.152.49/yseacg4cwdkg/8i3soi585vjvyfh/6820_2.3.5_c910_hteng_s5_en_4.0_v01_Mod.zip
Now, for the flashing software, the link to get it is: http://www.mediafire.com/?o9km8vl287ev24j
Instructions for flashing, from pogodancer, are:
Quote:
0. Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-v4-.rar".
1. Disable just in case your Win7 firewall.
2. Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
3. Start "ResearchDownload.exe" from package folder "ResearchDownload".
4. In ResearchDownload-application chose firmware with first button (for me: 6820_2.3.5_c910_hteng_s5_en_4.0_v01.pac).
5. Be sure that the Baudrate from Win7-Device-Manager-Comports-Settings in CHANNELSERVER equals the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115.200.
6. Press the Start (Play) button in ResearchDownload-application (third button).
7. Turn off the phone.
8. Keep holding the "- volume" key.
9. Without releasing the button "- volume" plug the usb-cord from phone to Win7 (install the driver if not done before in step 0).
10. The process of firmware-burning should start now in ResearchDownload-application and take approximately 1 Minute. You can release the Vol.Button once it starts.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Please note that I have flashed the phone it in a Windows XP virtualbox machine and I realized I didn't need the CHANNELSERVER application, so I went directly to step 3.
Cheers.
And my last post is coming soon ics for Karbonn A1+
After im moving to Sony Xperia Sp fourm
See u soon.........Bye:angel:
Click to expand...
Click to collapse
Which firmware do u want us to use?? The ones which have been provided at the top of the post or the ones which a below. Also there are 2 places where you've mentioned the process. The first one is very small while the second is longer. Need some help please.
New VERNEE MARS Modding Thread
New Modding thread for the new model Vernee Mars Helio P10 Octa core Mtk 6757
Vernee MARS MT6757 Octa Core 4G LTE 802.11ac 4GB 32GB Android 6 & 7 Smartphone 5,5 inches
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everybody are Welcome! :laugh::good:
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
XDA:DevDB Information
Vernee MARS , ROM for all devices (see above for details)
Contributors
ghost45
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2017-02-18
Last Updated 2017-03-25
Reserved
Software Section
New Official firmware:
Lollipop Android 6 (Backup By Hanuma50)
http://www.needrom.com/download/vernee-mars/
Lollipop Android 7 (Backup By Ghost45)
https://mega.nz/#!ph1X2DDQ!N9Jrob7Fla7jxy-FtOETjGqQNH4My5aycBpnfRYo_aI
Drivers :
https://mega.nz/#!D4MnFBCZ!pb-v5EeRixWXb-NRzoi2fZuaYYkclM36-1QisVyBag4
https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip
Recovery Modded
TWRP for Android 6 ported By Hanuma50
https://mega.nz/#!Sd8TnCJQ!skz9TLqSO2z8bM6ZwNA7gO7wph-ZZRqlK64KtlJoQjQ
TWRP for Android 7 ported By Megthebest
https://mega.nz/#!SAE3lbpL!reWHuRKgEI_7xvTcJAchWT9N8bXk62Ay5m0virtolyw
Carliv CWM By Ghost45
CWM Touch for Android 6
https://mega.nz/#!Bh8ViSbA!M29VpZKV7y7_y66nZTweXvgjXi-HGyHchv-SmcOR7tE
Cwm Touch for Android7
https://mega.nz/#!h4EAXbJQ!YrBzqRA44HUJYqvGGVVBpfxbYPAgzu2w1jx4hZsBXlw
Super Su
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Flashtool V.5.xxx
Version Only for last Devices Octa Core
https://mega.nz/#!ikkW2QhB!RK18HNLZUoUO4mpxP77GguN2rzeKS7tRuIAdW-9sDGE
Section setup Software:
Drivers Installation :
Procedure :
To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer
Once you have installed the terminal will be shown in this way (the COM port may be different)
For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict, or even if you just do the confusion and installed it different,
to solve, you can try to use the program
usbdeview:
http://www.nirsoft.net/utils/trans/usbdeview_italian.zip
select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC
Installation of the Firmware:
PROCEDURE
1) Setup new Firmware
download the new firmware.
Unzip the compressed file and insert into the firmware folder:
a) recovery modded (is necessary for receive right root)
Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!
Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade
...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.
How to have right root on Vernee MARS
Procedure
Install one recovery modded through the previous link with flashtool (Flag only preloader and recovery files)
after run through recovery place the supersu zip file and you will receive, after reboot, the right root .
Attention after received the right root is not possible to apply the ota update of new firmwares.
MANY THANKS TO :
C3C076, Dearlynounou the autors of Xposed modules add on, and
Hanuma,Carliv,Chainfire,MegTheBest, Marsapa,Cleopatra81,Tao,Stahl and all my friends that collaborate with me...
New Custom Rom for Vernee MARS Based android 7
New Custom Rom Based Android 7
MARS
Details:
- Custom Rom Based Android 7 aosp official firmware (Version For FLASHTOOL)
- Pre root with Busibox
- SuperSu must be installed after installed the custom rom through flashtool
- new launcher add nova basic (must be upgraded to prime version)
- Recovery Cwm Touch
- New melodies added
- Dolby Digital
- New arrows inside
- New tricks and apps .
How Install The Custom Rom V1
1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ....connected!
Run Flashtool version octa-core ..... select the file scatter,
and then check that all flags are selected
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress.....
2) Step (Necessary)
This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition .
for this moment i'm not able to save that partition and so probably in the V2 Custom rom probably will be)
1) reboot in android system (7) after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,79.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and the right root .
Files to download :
Custom Rom V1
https://mega.nz/#!4lUFUSKa!zXccQ3zGaqi2y11p5ssp0JKuiT1XsNzMoN9zKwwchgQ
Supersu
https://mega.nz/#!cxUSkYBA!CxmVdoftoSeDGvrnaugsxFKklV7tdFa6GhN5gKgyRTQ
New Custom Rom for Vernee MARS Based android 6
New Custom Rom Based Android 6
MARS
Details:
- Custom Rom Based Android 6 aosp (official firmware By Hanuma)
(Version For FLASHTOOL)
- Pre root with Busybox
- GravityBox (must be activated after the 2" Step Attention Please ...supersu must be installed first )
- Xstana Xposed modules for changing icons for navigation bar and more..
must be activated after the 2" Step Attention Please ...supersu must be installed first )
- new launcher add last nova 503 (must be upgraded to prime version)
- Recovery Cwm Touch By Ghost45
- New melodies added
- Dolby Digital
- New arrows inside with Xposed modules
- New tricks and Several apps
- SuperSu must be installed after installed the custom rom through flashtool.
How Install The Custom Rom V1
1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ....connected!
Run Flashtool version octa-core ..... select the file scatter,
and then check that all flags are selected
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress.....
2) Step (Necessary)
This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition .
for this moment i'm not able to save that partition and so probably in the V2 Custom rom probably will be)
1) reboot in android system after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,79.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and the right root .
Files to download :
Custom Rom V1
https://mega.nz/#!xg9EVBrI!YU8a7gSTRerwPoiaJoZN1inAMFqCbKkD1bhkNN1Y5c8
Supersu
https://mega.nz/#!cxUSkYBA!CxmVdoftoSeDGvrnaugsxFKklV7tdFa6GhN5gKgyRTQ
Many Thanks to:
Hanuma,Carliv,C3C076,Chainfire,MegTheBest, Marsapa,Cleopatra81,Tao,Stahl and all my friends that collaborate with me..
New Cwm Touch for Android 6 & 7 Right ported
added the link in first page.
Also added link to official android 7 for MARS
"DO NOT SELECT FORMAT ALL "
But Firmware upgrade
to change type of android system
like android 6 to 7 or the contrary.
You will lost your IMEI number and you will receive too many problems!
I'm looking foward to test the new rom
vaorr said:
I'm looking foward to test the new rom
Click to expand...
Click to collapse
Soon the link to my new custom rom.
I have found one problem with supersu that need, in android 7,to be installed in a temporary partition.... So is this the late time to be publish my new custom rom..
Sent from my GT-I9505 using XDA Free mobile app
Reserved
Hi! Do you change anything on bluetooth? Because on the official rom i have a bug! The phone conects with the car bluetooth (hands free Parrot) but i have no sound on phone calls, but if i disconnect my smartwatch i have sound!
vaorr said:
Hi! Do you change anything on bluetooth? Because on the official rom i have a bug! The phone conects with the car bluetooth (hands free Parrot) but i have no sound on phone calls, but if i disconnect my smartwatch i have sound!
Click to expand...
Click to collapse
Try it i have modded several things...bluetooth according me run well.
:laugh:
Hi, I have one of these devices that just won't boot at all (bricked?) I have no idea how to fix this, I have downloaded and tried to do the above without much luck, I did however get the recovery modded twrp for android 7 successfully flashed (I think) but still nothing, any assistance would be most helpful, I would be happy to allow someone to take over my pc, to see if they can figure it out, just getting it to boot up would be a start !
What happened to your phone to make it bricked?
nothing, it came that way , but I can't send it back, if i cant get it working, I'll have to take the financial hit ?
Oh man, that sucks, I'm not techi enough to offer any help.
Hope someone cab help u out
New Custom Rom based android 6 is in Testing Phase ....see details in first page!
Custom Rom V1 Based android 6 is on The Air !
First pages...:laugh:
Is there a thread for Q&A for the Mars, I don't see 1
Can we ask here or not?
AnubuRe said:
Is there a thread for Q&A for the Mars, I don't see 1
Can we ask here or not?
Click to expand...
Click to collapse
This thread is only for custom rom...but ask to me i will try to help you...obvious