Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
looks like you got into a bit of trouble can you get into recovery or anything
try accessing your phone through abd maybe that would help
further help
shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
alexyaz said:
try accessing your phone through abd maybe that would help
Click to expand...
Click to collapse
I am a new user and can't post links but Google what alexyaz said to help guide you through, search something like hot to access abd to install ROM. also if you need your original software Google search the model of your phone with stock ROM.
Once you fix it due try to read all directions a few times when implementing a new ROM to make sure you don't get any unneeded errors
i have a x10 mini pro and it got bricked.
i tried out every single procedure i could find on the internet. But still, i could not unbrick the phone.
The current status of my phone is , when i start it, it briefly vibrates then a blank screen appears for 5seconds. Then nothing for another 5 seconds, then the blank screen again... its the blank screen loop.
I dont see any Sony Ericsson logo or NAA kernel Logo.
The phone was running of
1. Naa Kernel v10,
2. cm7 1.9
3. unlocked boot loader
Things i tried:
1. Flashing stock rom and all other roms using flash tool.
2. Flashing Naa kernel v11.
3. Repair my phone using Sony Ericsson PC Companion.
4. Hard Reset.
5. Disassembled the device and the screen cables are good.
The adb does not recognize my phone, the flash tool recognizes my phone, but the PC Companion does not. When i select the Support Tool in the PC Companion and repair my phone, the PC Companion re-installs the Stock ROM successfully.
But still, i am stuck in the blank screen loop.
I had PMed this scenario to some experienced devs here in XDA.... and got replies too.... that didnt help again....
Please do help.
Thanks in advance.
It seems to be a hardware problem and not a brick.....
thanks to @leajian for the advice....
Thats a relief..... will give the device to the service center and see.....
Post closed...
I've bricked my SGS2 loads of times just by flashing roms, I just flash a stock rom back and start again then use my jig - that resolves bricking
Yup...
i did the flashing like 100 times....
restored the phone with pc companion another 100 times...
still the same thing..... blank screen loop.....
Hello everyone,
Yesterday I've tried to update my Xperia J to the new Jelly Bean firmware, but before that, I've done a full wipe and format system and cache through CWM. After that, I reboot my phone and it never goes after the Sony logo. I've tried to repair it with PC Companion, SUS and Flashtool, but everytime it starts to flash new Rom, the green led goes off and nothing is done.
Is there any solution for this, or should I go to the store and pray that it isn't to expensive to fix it?
Thanks in advance.
Anyone have a suggestion?
Re: [Help] Hard bricked my Xperia J...
Its not hard bricked.Its really normal for green light to go off while flashing ftf.Just wait for the flashtool to complete preparing files and then connect your phone in flash mode(green led) after the prompt appears.It will instantly start the flashing process (and yes, the green led goes off as soon as flashing starts so dont worry).
You may also experience a strange problem where the flashtool gets stuck at 0 percent. You can fix that by trying some older version of flashtool.
Good luck
Sent from my Xperia Tipo using Tapatalk 2
balboarocky said:
Its not hard bricked.Its really normal for green light to go off while flashing ftf.Just wait for the flashtool to complete preparing files and then connect your phone in flash mode(green led) after the prompt appears.It will instantly start the flashing process (and yes, the green led goes off as soon as flashing starts so dont worry).
You may also experience a strange problem where the flashtool gets stuck at 0 percent. You can fix that by trying some older version of flashtool.
Good luck
Sent from my Xperia Tipo using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for your help, I'm really getting stucked at 0 percent at Flashtool. I can´t even repair it with PC Companion, that's why I was afraid that is was an hard brick. I'm going to try with an older version of Flashtool as you've said.
Thanks again.
EDIT: I've tried with an older version of Flashtool and still no luck, always getting stucked at 0 percent. I read somewhere that my problem must be that my phone at this moment don't have any operating system and that probably I couldn't fix it at home. Is this true or is there something more I can do?
Re: [Help] Hard bricked my Xperia J...
Well i used to get this problem with my flashtool.Installing an older version did the trick for me.You can try flashing from some other system
Sent from my Xperia Tipo using Tapatalk 2
Re: [Help] Hard bricked my Xperia J...
Unloked bootloader????
Sent from my ST21i using xda app-developers app
Re: [Help] Hard bricked my Xperia J...
If you got unlocked bootloader then you can fastboot flash fxp kernel followed by the rom itself.This will atleast make your device functional again.
Sent from my Xperia Tipo using Tapatalk 2
Unfortunately my bootloader is locked.
I will try again, but this time on my computer here at work.
EDIT: Still no luck in another computer. I guess I will need to go to Vodafone Store at the end of the day and see what they can do with my phone.
Good news!!
I've installed PC Companion here on my work computer and it repaired my phone. Probably there's some kind of problem with my computer at home. I'm already flashing Jelly Bean normally with flashtool.
Thanks a lot for your help balboarocky.
Use Flashtool for this
Triptamine said:
Hello everyone,
Yesterday I've tried to update my Xperia J to the new Jelly Bean firmware, but before that, I've done a full wipe and format system and cache through CWM. After that, I reboot my phone and it never goes after the Sony logo. I've tried to repair it with PC Companion, SUS and Flashtool, but everytime it starts to flash new Rom, the green led goes off and nothing is done.
Is there any solution for this, or should I go to the store and pray that it isn't to expensive to fix it?
Thanks in advance.
Click to expand...
Click to collapse
I have got the same problem when i am trying to root my phone after that i flash my device with flashtoot and now its perfect working
Really hard Brick sony xperia J
under clockwork mod (after using int for installing cyanogen) i want to erase some data because my Cyanogen install was bugged (i forgot to Md5 checksum, so the files was maybe corrupted),
but i was very tired.and it's more than possible than i erase boot or systeme,
since that NO Led, No fastboot or Flashmode connections,
Do you think my Xperia is dead from dead (tm) .
Edit : to make the phone react and avoid bootloop i have to remove the battery and use it like the "power button" to take my phone in Flashboot, reflash Cwm and my phone work again ....
sony experia j (ST26I) hard brick
Helo everyone
I have problem with my xperia j (ST26i). My phone can't booting and not respond when I press power button. I think is hard brick. So I trying to flash it. When I connect phone to the computer(with press volume up button), computer cannot detected (I have installed sony pc companion). So i can't flash it. Anyone's can help me?
today i tried to flash a new rom on my phon(ihackers) it worked really well but there was a bug with a android process always popping up so i wiped it again and tried to flash it like before but after finishing the process my screen went black and my phone didi nothing i cant turn it on or off or something only when i plug it in to my pc it gets recognized as unknown devices Z1 but without drivers and now i dont know what to doo... :crying:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.