today i tried to flash a new rom on my phon(ihackers) it worked really well but there was a bug with a android process always popping up so i wiped it again and tried to flash it like before but after finishing the process my screen went black and my phone didi nothing i cant turn it on or off or something only when i plug it in to my pc it gets recognized as unknown devices Z1 but without drivers and now i dont know what to doo... :crying:
Related
i have a x10 mini pro and it got bricked.
i tried out every single procedure i could find on the internet. But still, i could not unbrick the phone.
The current status of my phone is , when i start it, it briefly vibrates then a blank screen appears for 5seconds. Then nothing for another 5 seconds, then the blank screen again... its the blank screen loop.
I dont see any Sony Ericsson logo or NAA kernel Logo.
The phone was running of
1. Naa Kernel v10,
2. cm7 1.9
3. unlocked boot loader
Things i tried:
1. Flashing stock rom and all other roms using flash tool.
2. Flashing Naa kernel v11.
3. Repair my phone using Sony Ericsson PC Companion.
4. Hard Reset.
5. Disassembled the device and the screen cables are good.
The adb does not recognize my phone, the flash tool recognizes my phone, but the PC Companion does not. When i select the Support Tool in the PC Companion and repair my phone, the PC Companion re-installs the Stock ROM successfully.
But still, i am stuck in the blank screen loop.
I had PMed this scenario to some experienced devs here in XDA.... and got replies too.... that didnt help again....
Please do help.
Thanks in advance.
It seems to be a hardware problem and not a brick.....
thanks to @leajian for the advice....
Thats a relief..... will give the device to the service center and see.....
Post closed...
I've bricked my SGS2 loads of times just by flashing roms, I just flash a stock rom back and start again then use my jig - that resolves bricking
Yup...
i did the flashing like 100 times....
restored the phone with pc companion another 100 times...
still the same thing..... blank screen loop.....
I installed AOPK milestone(not sure which version) on my brothers Xperia X8. And after I did everything, it only had to boot. Restarted phone and it always stop at the black screen saying with white letters Sony Ericsson. I tried to restart it with Sony PC companion program, but my computer froze every time I put my phone in flash state.
Any suggestions? Thanks in advance.
CyFeed said:
I installed AOPK milestone(not sure which version) on my brothers Xperia X8. And after I did everything, it only had to boot. Restarted phone and it always stop at the black screen saying with white letters Sony Ericsson. I tried to restart it with Sony PC companion program, but my computer froze every time I put my phone in flash state.
Any suggestions? Thanks in advance.
Click to expand...
Click to collapse
Flash stock ftf through flashtool.
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
IrvinPinto said:
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
Click to expand...
Click to collapse
More details, please What soft were you running, what kernel were you flashing.
Notice that CWM is only for ICS!
wnerw said:
More details, please What soft were you running, what kernel were you flashing.
Notice that CWM is only for ICS!
Click to expand...
Click to collapse
ok..so i got it now...damn..i cant seem to install a custom ROM now..cant get the device into recovery mode without flashing the kernal..
tried installing ParanoidAndroid custom ROM on my rooted ST26i firmware ver 11.2.A.0.21 but just goes into bootloops once i install the zip file and restart..
i rooted the phone like so....
http://forum.xda-developers.com/showthread.php?t=2183737
cant get the phone into recovery mode
IrvinPinto said:
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
Click to expand...
Click to collapse
Try flashing the stock rom, it worked for me!!!!!!
the same thing hapenned to me too
Okay so I seem to have soft bricked my Xperia J too
Only this time I can't seem to get into Flash mode or Recovery mode!
Holding/Pressing Vol+ doesn't bring up the blue LED and the phone doesn't vibrate at all.
Likewise for Vol+. Nothing happens and the phone remains stuck on the Sony boot logo.
Any idea what I could do? (USB isn't recognised on PC either so I can't connect that way.)
Edit: Okay scratch that, randomly button mashing Volume DOWN seemed to work for me. Only took about 50 or so reboots
Sony`s PC Companion can repair Boot Up problems after CWM install faild
Just watch this video on youtube and follow exactly the description on your PC Companion. Just search for this video on youtube "How to fix a (soft) bricked Sony Xperia Play( any Xperia )EASY METHOD, when stuck on the Sony logo"
Wanted to post the Link but it`s not allowed before posted at last ten contributions - sorry for that (XDA rules!)
This will fix all Xperia Models - it works so easy and pretty fast (about 20 minutes) and after that you have a phone just like brand new from the dealer with the latest software rolled out for your device in your country - sweet
Pls help me S1 fastboot prblm
Jampony said:
Okay so I seem to have soft bricked my Xperia J too
Only this time I can't seem to get into Flash mode or Recovery mode!
Holding/Pressing Vol+ doesn't bring up the blue LED and the phone doesn't vibrate at all.
Likewise for Vol+. Nothing happens and the phone remains stuck on the Sony boot logo.
Any idea what I could do? (USB isn't recognised on PC either so I can't connect that way.)
Edit: Okay scratch that, randomly button mashing Volume DOWN seemed to work for me. Only took about 50 or so reboots
Click to expand...
Click to collapse
My phone is not detected due to the driver problem !
Cannot get into fastboot mode !
I use Windows 7 32bit ..... the s1fastboot driver is not getting installed correctly !!
Why bother with Fastboot mode, use flashmode or SEUS to Repair ur phone....
I know this has been asked a lot, but i literally tried everything.
i have a sony xperia s, no SD card. rooted on jelly bean firmware 6.2.B.0.211 using Doomlord root kit, after playing with some tweaks, i rebooted the phone so they will take effect, the phone is now stuck in a boot loop... TRIED EVERYTHING, deleted the cache, system, data, tried the sony update, flashtools, installing custom ROM or flashing the same one. the problem is, when i'm trying to put the phone in flashmode or fastboot mode, the sony logo appears after 5 seconds, showing "device disconnected" on flashtools. thus i can't ( i think) use it. i really dont know what to do here, i've been looking all over the internet for anything to do...tried everything i have read, but to no use. can anyone PLEASE help me.
Cant connect via usb fastboot then very less hope...
Contact sony costumer care....
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.