Ok i can enter to the bootloader, and also to the recovery, but! when i flash a rom it cant boot on ! i got stucked after the HTC Logo. Also tried to to flash PD98IMG from hboot without succes and the same thing with RUU, in HBOOT the RUU software says that my battery is 30% or less and i have to chargue it, but is full! so have to enter in fastboot mode and it pass that step then it chargue the ruu but then it send an error that the image restore from ruu cant be completed.
Btw: S-on AND unlocked bootloader
i red about flash the boot.img from the ROM zip in fastboot? it work? how do i do it?
Killerin said:
Ok i can enter to the bootloader, and also to the recovery, but! when i flash a rom it cant boot on ! i got stucked after the HTC Logo. Also tried to to flash PD98IMG from hboot without succes and the same thing with RUU, in HBOOT the RUU software says that my battery is 30% or less and i have to chargue it, but is full! so have to enter in fastboot mode and it pass that step then it chargue the ruu but then it send an error that the image restore from ruu cant be completed.
Btw: S-on AND unlocked bootloader
i red about flash the boot.img from the ROM zip in fastboot? it work? how do i do it?
Click to expand...
Click to collapse
extract the boot.img file from the zip (do not extract the zip) to your PC desktop, then boot the device in fastboot usb and in a CMD session in the PC (located in the desktop folder) type:
Code:
fastboot flash boot boot.img
then when you get the OKAY, type:
Code:
fastboot reboot
Related
I flashed the new RADIO and SPL,but forgot to flash a new recovery in HBOOT model. The flash was totally succeed (because after fashing,I tap "fastboot reboot-bootloader" command in HBOOT and it could reboot automatically into hboot model and I can see the new RADIO and SPL had been fashed.
But here comes the problem, I try to reboot my phone into recovery model to flash the new ROM, but no matter I press HOME+POWER or BACK+POWER this time, it reboots again and again at first boot screen, and donnot have any response with the key I tapped!
God! is that bricked? No please don't tell me it's true!
so to clarify, you didn't flash a recovery image and now you don't know why you can't boot to recovery?
boot to fastboot, flash the recovery only, reboot to recovery, flash the rom of your choice and enjoy
Of course, but I cannot boot into fastboot or recovery model now.
nabor said:
Of course, but I cannot boot into fastboot or recovery model now.
Click to expand...
Click to collapse
*facepalm*
if you can't get into fastboot and you can't get into recovery you just bricked your phone.
while it's bootlooping, can you adb devices and tell us what you get?
i'm surprised that it's bricked because you forgot to flash a recovery, would have thought you could still access fastboot...
I was surprised too.
I don't know why,but I can boot into fastboot model now, but my recovery and rom are still broken.
So I tried to type "fastboot boot recovery.img" on my computer, so that I can enter recovery temporary, but here comes another trouble, it can't mount sdcard now! Display "Can't mount /dev/block/mmcblk0p1(or /dev/block/mmcblk0)(No such file or directroy) E:Can't mount SDCARD
!"
So can I use adb shell to install a ROM???
calm down bro....
you didn't brick your phone...
i've same problem after I flashed the new radio SPL HBOOT and recovery...
I've used Hero Recovery...
after u flashed your handset with new radio SPL HBOOT and Recovery, the ROM file DELETED....
so, u just download new rom (that have SAME RADIO HBOOT and Recovery with your handset)
after finished the download, put the file into ROOT SDCard... and then flash it from your RECOVERY....
I've used HERO RECOVERY....
my handset is HTC MAGIC 32A
just do that, if the problem same with me....
BRAVO
nabor said:
I flashed the new RADIO and SPL,but forgot to flash a new recovery in HBOOT model. The flash was totally succeed (because after fashing,I tap "fastboot reboot-bootloader" command in HBOOT and it could reboot automatically into hboot model and I can see the new RADIO and SPL had been fashed.
But here comes the problem, I try to reboot my phone into recovery model to flash the new ROM, but no matter I press HOME+POWER or BACK+POWER this time, it reboots again and again at first boot screen, and donnot have any response with the key I tapped!
God! is that bricked? No please don't tell me it's true!
Click to expand...
Click to collapse
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
I don't recall the OP mentioning what handset they have. If its the MyTouch 3G Limited Edition or 1.2 (has headphone jack on top) a new user to rooting may confuse that with a Magic 32A in which case your instructions without clarifying would surely brick his phone. (Though he's on Fido, so not likely to be a MyTouch, but he didn't even mention of it was a Magic, Hero, G1, or if it was a DVT board instead of a PVT)
LoGaY said:
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
Click to expand...
Click to collapse
LoGaY said:
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
Click to expand...
Click to collapse
You shouldn't offer instructions like this. You have no idea what phone he's using. You offer such a high risk of bricking the phone since most members here fail to read instructions before running a bunch of commands.
He's fido like the above guy said which could mean he's using a rogers magic, but it's also unlikely. Fido doesn't have Magic, so he definitely got it off someone. And since it's rootable (it is unlikely that he could get a hands on a rooted magic here since their lame update) it has a high chance that its from tmo or something which = 32B board.
my phone is htc magic with 32A and it's ENG S-ON so I can't flash a recovery through fastboot, so I have to use "fastboot boot recovery.img" to use a recovery temporary just I said above. I do know that I can put a rom into a sdcard to flash it, but it can't mount sdcard now
Try waiting 30-60 seconds before accessing the SD card. Some recovery images take a while to mount the card.
A few days ago, a friend present a G2 magic to me, it could be used normally.
However, when i want to flash ROM, i found it could not supports SDCARD in system and in recovery mode, only in fastboot mode.
I got the information in fastboot mode:32B ENG S-ON H ; HBOOT-1.33.2010; CPLD-10; RADIO-3.22.20.17;
You know, it is so interesting, because i could not match the RUU in the list. I think 32B is wrong, because i downloaded the 1.6.2g.img recovery and flash in fastboot mode, it is fake. but 1.6.2h.img is right after i boot the recovery.
First of all, I want to edit S-ON to OFF, for i read some articles in much android BBS, once it will be OFF, the G2 could support SDCARD in recovery mode again and flash other ROM.
I made a goldcard and copy the 2.53.707.2 sappimg.zip in the SDCARD, in fastboot mode, the system rebuilded again. i could power on the phone normally, and it could not support SDCARD.
in adb shell and fastboot mode, i try again to cover orginal hboot with the signed hboot.img(spl-1.33.2010) to OFF, but i failed.
what shall i do? i am nearly crying now.
fastboot oem enableqxdm 0
Good thing u reverted to stock SPL. Now the above option might not work.
the 32B is not wrong , the radio is. Flash a 2.xx.xx.xx radio and all will be well.
thanks eyegor
i followed your way, but it was failed. because it showed: signature verify fail.
In fastboot mode, input fastboot erase radio and fastboot flash radio radio.img
is it right?
i think the reason of verify fail is spl-ON.
Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.
guymalpass said:
Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.
Click to expand...
Click to collapse
try to gain s-off.
you can install every ruu then and chaning cid will be much easier then.
guymalpass said:
Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.
Click to expand...
Click to collapse
To run the latest cm hou have to have a hboot of 2.15. What's your current version?
Did you btw flash the boot.img seperatly?
If s-on you have to.
Flash a RUU (cant flash a RUU with a lower hboot than that you already have)
Than do otas till your on jb. Then go back to custom roms.
Verstuurd van mijn HTC One S met Tapatalk
Thanks for the replies, is it possible to s-off when I can only access bootloader though? My hboot is 2.15.0000 and yes I had flashed the boot.img separately, the rom worked perfectly until I flashed the wrong gapps. I would love to flash an RUU but I can only find one that is compatible with my cid and it won't install.
guymalpass said:
[...] and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop.
Click to expand...
Click to collapse
fastboot erase cache
^-- this often / sometimes / maybe fixes the situation where recovery fails to boot.
guymalpass said:
Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.
Click to expand...
Click to collapse
Have you tried using Hansoons All-in-one toolkit to flash a recovery?
Okay, I tried putting a new rom on my at&t one xl, and it did something horribly wrong. I was able to get to recovery and it told me I had no operating system, the I tried flashing a new rom again. At this point it restarted the phone got stuck at the splash screen and now I cant even get to recovery just the fast boot and boot loader. Any help would greatly appreciated.
You haven't given any of the vital information required to help you. Please provide the following:
hboot/firmware version
S-on or s-off
Recovery version
What ROM(s) you were trying to flash
What you have done to try to recover
Sent from my Evita
timmaaa said:
You haven't given any of the vital information required to help you. Please provide the following:
hboot/firmware version
S-on or s-off
Recovery version
What ROM(s) you were trying to flash
What you have done to try to recover
Sent from my Evita
Click to expand...
Click to collapse
hboot 1.14.002
s is off
cant remember recovery version since I can't access it
I had viper rom and I was going to cyanogen mod 10.1
and I thought I had a titanium backup but my whole sd card go deleted, so I mounted my sd card and got the rom again and flashed it and at that point I couldn't go back to recovery
Did you read the OP for cm10.1? It states in the requirements that you must RUU up to the latest (3.18) to run that ROM. In terms of your recovery, just flash it again from fastboot.
Sent from my Evita
timmaaa said:
Did you read the OP for cm10.1? It states in the requirements that you must RUU up to the latest (3.18) to run that ROM. In terms of your recovery, just flash it again from fastboot.
Sent from my Evita
Click to expand...
Click to collapse
I must of completely overseen that. and sir the only option I have on my boot is fast boot, recovery, factory reset, clear storage, simlock, image crc, and power down. I don't know how to even flash things at this point.
and only options I fast boot are bootloader, reboot, reboot boot loader and powerdown
That's all you need to RUU, it's an exe file that you just run while your phone is connected in fastboot mode. You'll need top flash your recovery again, then you can flash a ROM.
Download the RUU
Run the RUU
Download recovery
Flash recovery
Flash ROM
The fastboot command to flash the recovery is:
fastboot flash recovery "recovery.img"
(The exact recovery filename, without the talking marks)
fastboot erase cache
fastboot reboot-bootloader
Now you can enter recovery on your phone, mount usb storage, copy ROM to phone, flash ROM.
Sent from my Evita
Thanks guys. My kids an idiot and did this today to his phone (my old phone). He got the information from you guys and left it to me to fix when I got home.
timmaaa said:
That's all you need to RUU, it's an exe file that you just run while your phone is connected in fastboot mode. You'll need top flash your recovery again, then you can flash a ROM.
Download the RUU
Run the RUU
Download recovery
Flash recovery
Flash ROM
The fastboot command to flash the recovery is:
fastboot flash recovery "recovery.img"
(The exact recovery filename, without the talking marks)
fastboot erase cache
fastboot reboot-bootloader
Now you can enter recovery on your phone, mount usb storage, copy ROM to phone, flash ROM.
Sent from my Evita
Click to expand...
Click to collapse
Cool glad ur all set
Sent from my HTC One XL using xda premium
I have been in fast boot current bootloader screen is hboot 3.19.0.0000 radio 1.12.20.1211 and os 4.17.605.9
Im S-off unlocked
with TWRP 3.0.2.0 installed
DarkCodedDragon said:
I have been in fast boot current bootloader screen is hboot 3.19.0.0000 radio 1.12.20.1211 and os 4.17.605.9
Im S-off unlocked
with TWRP 3.0.2.0 installed
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347819109
Place the zip in your fastboot/adb directory on your computer.
Put the device in fastboot mode
(Volume down and power until menu appears, select fastboot using power button)
Connect the device to the computer
Enter the following commands from terminal/command prompt in the fastboot directory, one at a time:
fastboot oem rebootRUU (this puts the device in RUU mode)
fastboot flash zip firmware.zip (rename file to firmware.zip to make it simple/optional)
It will say that the update did not finish, to flush again, so repeat the above step:
fastboot flash zip firmware.zip
Quote:
Important: the flash process halts at around 75% to 90% on phone screen! This is normal and a safety precaution!
The last few percent is the reboot, which is NOT happening automatically, so you get a chance to check the console output before reboot to make sure it is safe to reboot!
The bar will only fill up to 100% once you type the following command:
fastboot reboot-bootloader (this reboots the device to bootloader)
That's it, you're done. You can now reboot and will be running the latest firmware and radios.
http://forum.xda-developers.com/showpost.php?p=62734094&postcount=2
So from here do I just pick any 5.01 rom and flash with TWRP.?? And I do have to reflash SU after this correct?
I got updated rom , still need to check SU after rom loads thanks