[Q] Changing cid in RUU then resigning - HTC One S

Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.

guymalpass said:
Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.
Click to expand...
Click to collapse
try to gain s-off.
you can install every ruu then and chaning cid will be much easier then.

guymalpass said:
Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.
Click to expand...
Click to collapse
To run the latest cm hou have to have a hboot of 2.15. What's your current version?
Did you btw flash the boot.img seperatly?
If s-on you have to.
Flash a RUU (cant flash a RUU with a lower hboot than that you already have)
Than do otas till your on jb. Then go back to custom roms.
Verstuurd van mijn HTC One S met Tapatalk

Thanks for the replies, is it possible to s-off when I can only access bootloader though? My hboot is 2.15.0000 and yes I had flashed the boot.img separately, the rom worked perfectly until I flashed the wrong gapps. I would love to flash an RUU but I can only find one that is compatible with my cid and it won't install.

guymalpass said:
[...] and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop.
Click to expand...
Click to collapse
fastboot erase cache
^-- this often / sometimes / maybe fixes the situation where recovery fails to boot.

guymalpass said:
Hi, after flashing an incorrect version of gapps onto a CM10.1 nightly rom I have worked myself into a very tight corner.
The phone is s-on, wont boot into android and also I am unable to enter any kind of recovery. I have tried fastboot flash recovery and fastboot boot recovery with CWM and TWRP and flashing a stock recovery extracted from an RUU. All I get when trying to enter recovery is a reboot then HTC white screen then boot loop. I am under the impression all I can possibly do at this stage is to flash a stock RUU yet I can only find one RUU that matches my ORANG_001 cid and that gives me the error of "44 hboot version check fail". So I then tried to flash a more recent RUU but they all have different cid numbers. If I attempt to modify the android-info.txt to add my cid I corrupt the zip and get a sign verification failure. I've attempted to make a new zip and then resign it with AutoSign.zip but again I get a "12 signature verify fail."
If anyone could shine any light on altering cid inside RUU or possibly a way of me getting back into recovery it would be greatly appreciated.
Click to expand...
Click to collapse
Have you tried using Hansoons All-in-one toolkit to flash a recovery?

Related

ruu wont work, cant boot from recovery

ok now i tried 2 different ruu's and both said error 155, get the correct one, but it was the correct one i checked the number 2.20. I tried to restore from a backup in twrp and when it tries to boot it goes to the htc screen and then goes blank and goes into a bootloop. what should i do?
you should flash the boot.img for the ROM you are trying to restore.
or "boot.emmc.win" rename to boot.img and flash that with fastboot flash boot boot.img

[Q] Fastboot flash radio

I have S-Off, custom H-Boot 2.14 with red writing on splash removed, unlocked bootloader, cid 11111111, viper 3.2.3 rom and TWRP 2.4.1.0 recovery, why can't I fastboot flash radios? I keep getting "FAILED (remote: not allowed)".
I can flash the zips in recovery no problems but can't flash the extracted radio images through fastboot, it sends the radio but fails to write it.
Any ideas anyone?
You flash the radio zip from fastboot I think. Not the extracted image
Sent from my VENOMized HoxL
agbart said:
I have S-Off, custom H-Boot 2.14 with red writing on splash removed, unlocked bootloader, cid 11111111, viper 3.2.3 rom and TWRP 2.4.1.0 recovery, why can't I fastboot flash radios? I keep getting "FAILED (remote: not allowed)".
I can flash the zips in recovery no problems but can't flash the extracted radio images through fastboot, it sends the radio but fails to write it.
Any ideas anyone?
Click to expand...
Click to collapse
I always have flashed radios thru recovery
With the one xl you can simply flash the radios through recovery with s off... With new HTC devices if s off is present you'll be flashing radios through fastboot which night require an eng hboot but I'm not 100% sure on that

Softbrick, brick, dont know what the F is happening lol help!

Ok i can enter to the bootloader, and also to the recovery, but! when i flash a rom it cant boot on ! i got stucked after the HTC Logo. Also tried to to flash PD98IMG from hboot without succes and the same thing with RUU, in HBOOT the RUU software says that my battery is 30% or less and i have to chargue it, but is full! so have to enter in fastboot mode and it pass that step then it chargue the ruu but then it send an error that the image restore from ruu cant be completed.
Btw: S-on AND unlocked bootloader
i red about flash the boot.img from the ROM zip in fastboot? it work? how do i do it?
Killerin said:
Ok i can enter to the bootloader, and also to the recovery, but! when i flash a rom it cant boot on ! i got stucked after the HTC Logo. Also tried to to flash PD98IMG from hboot without succes and the same thing with RUU, in HBOOT the RUU software says that my battery is 30% or less and i have to chargue it, but is full! so have to enter in fastboot mode and it pass that step then it chargue the ruu but then it send an error that the image restore from ruu cant be completed.
Btw: S-on AND unlocked bootloader
i red about flash the boot.img from the ROM zip in fastboot? it work? how do i do it?
Click to expand...
Click to collapse
extract the boot.img file from the zip (do not extract the zip) to your PC desktop, then boot the device in fastboot usb and in a CMD session in the PC (located in the desktop folder) type:
Code:
fastboot flash boot boot.img
then when you get the OKAY, type:
Code:
fastboot reboot

[Q] one xl stuck

Okay, I tried putting a new rom on my at&t one xl, and it did something horribly wrong. I was able to get to recovery and it told me I had no operating system, the I tried flashing a new rom again. At this point it restarted the phone got stuck at the splash screen and now I cant even get to recovery just the fast boot and boot loader. Any help would greatly appreciated.
You haven't given any of the vital information required to help you. Please provide the following:
hboot/firmware version
S-on or s-off
Recovery version
What ROM(s) you were trying to flash
What you have done to try to recover
Sent from my Evita
timmaaa said:
You haven't given any of the vital information required to help you. Please provide the following:
hboot/firmware version
S-on or s-off
Recovery version
What ROM(s) you were trying to flash
What you have done to try to recover
Sent from my Evita
Click to expand...
Click to collapse
hboot 1.14.002
s is off
cant remember recovery version since I can't access it
I had viper rom and I was going to cyanogen mod 10.1
and I thought I had a titanium backup but my whole sd card go deleted, so I mounted my sd card and got the rom again and flashed it and at that point I couldn't go back to recovery
Did you read the OP for cm10.1? It states in the requirements that you must RUU up to the latest (3.18) to run that ROM. In terms of your recovery, just flash it again from fastboot.
Sent from my Evita
timmaaa said:
Did you read the OP for cm10.1? It states in the requirements that you must RUU up to the latest (3.18) to run that ROM. In terms of your recovery, just flash it again from fastboot.
Sent from my Evita
Click to expand...
Click to collapse
I must of completely overseen that. and sir the only option I have on my boot is fast boot, recovery, factory reset, clear storage, simlock, image crc, and power down. I don't know how to even flash things at this point.
and only options I fast boot are bootloader, reboot, reboot boot loader and powerdown
That's all you need to RUU, it's an exe file that you just run while your phone is connected in fastboot mode. You'll need top flash your recovery again, then you can flash a ROM.
Download the RUU
Run the RUU
Download recovery
Flash recovery
Flash ROM
The fastboot command to flash the recovery is:
fastboot flash recovery "recovery.img"
(The exact recovery filename, without the talking marks)
fastboot erase cache
fastboot reboot-bootloader
Now you can enter recovery on your phone, mount usb storage, copy ROM to phone, flash ROM.
Sent from my Evita
Thanks guys. My kids an idiot and did this today to his phone (my old phone). He got the information from you guys and left it to me to fix when I got home.
timmaaa said:
That's all you need to RUU, it's an exe file that you just run while your phone is connected in fastboot mode. You'll need top flash your recovery again, then you can flash a ROM.
Download the RUU
Run the RUU
Download recovery
Flash recovery
Flash ROM
The fastboot command to flash the recovery is:
fastboot flash recovery "recovery.img"
(The exact recovery filename, without the talking marks)
fastboot erase cache
fastboot reboot-bootloader
Now you can enter recovery on your phone, mount usb storage, copy ROM to phone, flash ROM.
Sent from my Evita
Click to expand...
Click to collapse
Cool glad ur all set
Sent from my HTC One XL using xda premium

Won't accept flashing RUU

Hello! I have this phone and it had unlocked bootloader so i flashed custom recovery to install stock rom. But it didn't boot even after flashing zip from CM. So i decided to flash stock RUU. I managed to get cid from unbootable phone by using "getvar cid" so i downloaded RUU with proper cid. This RUU flashes fine until it comes to the end- and that is represented as error 152.
When i unplug the cable, phone shows that partition "USERDATA" failed, and when i reboot the phone, i have black screen with HTC shown, with 4 triangles at the corners.
I tried to unlock bootloader to flash recovery again, but it does nothing when i use unlocktoken obtained from HTCDev. I also tried using rom.zip from RUU to flash through fastboot, but it doesn't help.
is there any hope for this phone ? thanks in advance.

Categories

Resources