Database Info

Damn！Reboot again and again after flash the RADIO!

I flashed the new RADIO and SPL,but forgot to flash a new recovery in HBOOT model. The flash was totally succeed (because after fashing,I tap "fastboot reboot-bootloader" command in HBOOT and it could reboot automatically into hboot model and I can see the new RADIO and SPL had been fashed.
But here comes the problem, I try to reboot my phone into recovery model to flash the new ROM, but no matter I press HOME+POWER or BACK+POWER this time, it reboots again and again at first boot screen, and donnot have any response with the key I tapped!
God! is that bricked? No please don't tell me it's true!

so to clarify, you didn't flash a recovery image and now you don't know why you can't boot to recovery?
boot to fastboot, flash the recovery only, reboot to recovery, flash the rom of your choice and enjoy

Of course, but I cannot boot into fastboot or recovery model now.

nabor said:
Of course, but I cannot boot into fastboot or recovery model now.
Click to expand...
Click to collapse
*facepalm*
if you can't get into fastboot and you can't get into recovery you just bricked your phone.

while it's bootlooping, can you adb devices and tell us what you get?
i'm surprised that it's bricked because you forgot to flash a recovery, would have thought you could still access fastboot...

I was surprised too.
I don't know why,but I can boot into fastboot model now, but my recovery and rom are still broken.
So I tried to type "fastboot boot recovery.img" on my computer, so that I can enter recovery temporary, but here comes another trouble, it can't mount sdcard now! Display "Can't mount /dev/block/mmcblk0p1(or /dev/block/mmcblk0)(No such file or directroy) E:Can't mount SDCARD
!"
So can I use adb shell to install a ROM???

calm down bro....
you didn't brick your phone...
i've same problem after I flashed the new radio SPL HBOOT and recovery...
I've used Hero Recovery...
after u flashed your handset with new radio SPL HBOOT and Recovery, the ROM file DELETED....
so, u just download new rom (that have SAME RADIO HBOOT and Recovery with your handset)
after finished the download, put the file into ROOT SDCard... and then flash it from your RECOVERY....
I've used HERO RECOVERY....
my handset is HTC MAGIC 32A
just do that, if the problem same with me....
BRAVO
nabor said:
I flashed the new RADIO and SPL,but forgot to flash a new recovery in HBOOT model. The flash was totally succeed (because after fashing,I tap "fastboot reboot-bootloader" command in HBOOT and it could reboot automatically into hboot model and I can see the new RADIO and SPL had been fashed.
But here comes the problem, I try to reboot my phone into recovery model to flash the new ROM, but no matter I press HOME+POWER or BACK+POWER this time, it reboots again and again at first boot screen, and donnot have any response with the key I tapped!
God! is that bricked? No please don't tell me it's true!
Click to expand...
Click to collapse

the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)

I don't recall the OP mentioning what handset they have. If its the MyTouch 3G Limited Edition or 1.2 (has headphone jack on top) a new user to rooting may confuse that with a Magic 32A in which case your instructions without clarifying would surely brick his phone. (Though he's on Fido, so not likely to be a MyTouch, but he didn't even mention of it was a Magic, Hero, G1, or if it was a DVT board instead of a PVT)
LoGaY said:
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
Click to expand...
Click to collapse

LoGaY said:
the command is
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
read from this thread
http://forum.xda-developers.com/showthread.php?t=605239
download all files you need....
better use last recovery.... (1.5.2 isn't last recovery)
Click to expand...
Click to collapse
You shouldn't offer instructions like this. You have no idea what phone he's using. You offer such a high risk of bricking the phone since most members here fail to read instructions before running a bunch of commands.
He's fido like the above guy said which could mean he's using a rogers magic, but it's also unlikely. Fido doesn't have Magic, so he definitely got it off someone. And since it's rootable (it is unlikely that he could get a hands on a rooted magic here since their lame update) it has a high chance that its from tmo or something which = 32B board.

my phone is htc magic with 32A and it's ENG S-ON so I can't flash a recovery through fastboot, so I have to use "fastboot boot recovery.img" to use a recovery temporary just I said above. I do know that I can put a rom into a sdcard to flash it, but it can't mount sdcard now

Try waiting 30-60 seconds before accessing the SD card. Some recovery images take a while to mount the card.

[SOLVED] Plz help: my phone can't boot now

Dear all, I need your help ASAP.
My phone (rooted) doesn't boot now, adb does not recognizes, fastboot still ok. And I don't know what to do.
Recently I rooted my Desire S and succeeded with the stock ROM. After a coupe of days I dicided to flash Endymion, from here: http://forum.xda-developers.com/showthread.php?t=1310845
I downloaded Endymion 3.1 into SD, then used Rom Manager to flash it. But then it was not be able to reboot (stucked on splash screen).
After that I rebooted into recovery (4EXT) and formated system, data, cache, boot and retried to install Endymion 3.1.
But then it became worse, now I can't use adb (always says: device not found), normal boots always stucks at splash screen (with green "HTC"). No hard button can be used, I need to reboot by take off the battery, then put it back on.
fastboot still seems working fine if I reboot to fastboot mode, but when I try "fastboot erase ...", I get "remote: not allowed". But other commands (fastboot flash...) still ok.
4EXT recovery is also still working.
Please help me to install some ROM at least. A lot of thanks.

Not quite sure, but could it be a faulty eMMC chip? Since you did mention you pulled out the battery.
http://forum.xda-developers.com/showthread.php?t=1314629
I did have a similar problem before myself.

So can you get into the boot loader? I'm assuming so since u got into fast boot. I would try flashing an update.zip through there, such as a stock from containing recovery.img,system.img...etc.
Sent from my HTC Desire HD using xda premium

Thank you for replies.
@microlah: I think my problem is not eMMC because I did not get those errors.
@stumpyz9: Before trying to flash Endymion 3.1, I made a backup of the rooted Sense 3.0 through Rom Manager -> a collection of *.img files.
I have tried to boot into fastboot, and executed these commands:
fastboot erase boot -> Error: remote not allowed
fastboot erase recovery -> Error: remote not allowed
fastboot flash system system.img -> OK
fastboot flash boot boot.img -> OK
fastboot flash userdata data.img -> OK
fastboot flash recovery recovery.img -> OK
but after this, the phone still does not boot normally.
Please tell me if I did something wrong or not. I dont know how to make update.zip from *.img files, and dont know where to get and choose the right stock rom for my phone.

d_t_kien said:
Dear all, I need your help ASAP.
My phone (rooted) doesn't boot now, adb does not recognizes, fastboot still ok. And I don't know what to do.
Recently I rooted my Desire S and succeeded with the stock ROM. After a coupe of days I dicided to flash Endymion, from here: http://forum.xda-developers.com/showthread.php?t=1310845
I downloaded Endymion 3.1 into SD, then used Rom Manager to flash it. But then it was not be able to reboot (stucked on splash screen).
Click to expand...
Click to collapse
Are you S-OFF or htcdev unlocked ? If you're still S-on you have to manually flash boot.img with fastboot to get Endymion or others custom roms working.

d_t_kien said:
Thank you for replies.
@microlah: I think my problem is not eMMC because I did not get those errors.
@stumpyz9: Before trying to flash Endymion 3.1, I made a backup of the rooted Sense 3.0 through Rom Manager -> a collection of *.img files.
I have tried to boot into fastboot, and executed these commands:
fastboot erase boot -> Error: remote not allowed
fastboot erase recovery -> Error: remote not allowed
fastboot flash system system.img -> OK
fastboot flash boot boot.img -> OK
fastboot flash userdata data.img -> OK
fastboot flash recovery recovery.img -> OK
but after this, the phone still does not boot normally.
Please tell me if I did something wrong or not. I dont know how to make update.zip from *.img files, and dont know where to get and choose the right stock rom for my phone.
Click to expand...
Click to collapse
No font flash the backup .imgs flash a whole update zip through the boot loader. Use a stock rom that contains a bunch of .imgs. reflashing the ones u already have won't help
Sent from my HTC Desire HD using xda premium

Are you on hboot 2.00.002? If yes, did you flash the boot.img from Endymion via fastboot??
Sent from my iPod touch using Tapatalk

I used htcdev to unlock, it's still S-ON and HBOOT 2.00.002.
I did not flash boot.img of Endymion. Can I do that with "fastboot flash..." ?
Does it matter if "fastboot erase boot" makes error? (as I posted above)
Could you give me instructions step-by-step what I need to do, thank you.

hi all,
i have some problem like a d_t_kien (i have htcdev unlock dev. and HBOOT 2.00.002, 4EXT Recovery).... so after flash ROM (i try Reaper V2.0 - CM7mod) device has freeze on white HTC screen....
Please help us... how correctly flash Endymion ROM via fastboost..
Thanks

For both of you, here's the procedure. First, flash the ROM normally. Then, enter fastboot mode and flash the boot.img that came in the ZIP of your ROM.
Reference - http://forum.xda-developers.com/showpost.php?p=19071114&postcount=37

thx for your answer, its my bad, because i dont use search button... so i finf solution in this thread: http://forum.xda-developers.com/showthread.php?t=1314629
thx again .)

shrome99 said:
For both of you, here's the procedure. First, flash the ROM normally. Then, enter fastboot mode and flash the boot.img that came in the ZIP of your ROM.
Reference - http://forum.xda-developers.com/showpost.php?p=19071114&postcount=37
Click to expand...
Click to collapse
Many thanks. That solved my problem.
Edmyrion works great now on my phone.

Glad i helped

Solved
Please marked this thread as solved. Thanks moderator.

d_t_kien said:
Please marked this thread as solved. Thanks moderator.
Click to expand...
Click to collapse
You'll have to do it yourself.... As OP, that's one of your privileges... Just go to the first post, select EDIT, then ADVANCED, and then you can edit the title of your thread and add "SOLVED" to the title.

[Q] AT&T HTC One X Bricked and need advice

Hi,
I have an AT&T HTC One X with no OS. I wiped it when I was trying to flash a custom ROM.
I only have access to bootloader and TWRP. Fastboot is working fine but TWRP is not. It does
mount properly, and adb sideload fails as well. I am using a Windows 7 PC and used a USB 2.0 port.
I installed some HTC Drivers from here:
http://forum.xda-developers.com/showthread.php?t=2217396
but it still says "device drivers failed to install" when I boot into recovery.
When I try to mount, it does not let me mount the sdcard. I see an E: drive on my
PC but it is inaccessible.
I have S-On, my bootloader is unlocked, and I have hboot version 2.14 if that info helps.
Does anybody have any suggestions as to what I can try next?

First thing you need to do is clear your post up a bit. You said you have access to TWRP but it isn't working, can you elaborate on that please?
You also said that it does mount, but then you said later it doesn't mount, which is it?
Have you performed a factory reset from the bootloader at any point?
Exactly which ROM(s) did you try to install? I need the exact filename(s) please.
Did you remember to flash the boot.img with fastboot after flashing the ROM?
Do you have a TWRP backup on your phone?
Please answer all questions with as much relevant detail as possible, that'll aid me to help you properly.
Sent from my Evita

I helped him over teamviewer so I can clarify the situation. He can't mount in TWRP, it must of been a typo. It seems he cleared everything when he was trying to wipe to flash a rom. I believe it was ViperXL. He has no backup and sideload does not work as well. Hopefully that will clear things up a little bit more. I installed some newer HTC Drivers since the ones he had were old. The only thing that works seems to be fastboot at this point.
Sent from my HTC One X using Tapatalk

timmaaa said:
First thing you need to do is clear your post up a bit. You said you have access to TWRP but it isn't working, can you elaborate on that please?
You also said that it does mount, but then you said later it doesn't mount, which is it?
Have you performed a factory reset from the bootloader at any point?
Exactly which ROM(s) did you try to install? I need the exact filename(s) please.
Did you remember to flash the boot.img with fastboot after flashing the ROM?
Do you have a TWRP backup on your phone?
Please answer all questions with as much relevant detail as possible, that'll aid me to help you properly.
Sent from my Evita
Click to expand...
Click to collapse
Sorry it was a Typo, I was not able to mount at all. The error said "unable to mount /sdcard"
Yes I have tried performing a factory reset from bootloader but the phone restarts and comes back to TWRP and then same thing.
I tried installing the ViperXL ROM but was not successful.
I was not able to flash the ROM and I tried to fix that but meanwhile looks like I wiped all what I had on my Phone, so no but I did try to flash a new boot.img after and it didnt work.
I dont think I have any TWRP backup on my phone, even though I tried flashing new TWRP but all failed.

Ok first thing, don't ever perform a factory reset from the bootloader because it corrupts your sd card. That's why you're experiencing problems now. You need to wipe the sd card/internal storage using TWRP 2.6 to make it usable again. If you don't currently have TWRP 2.6 installed you'll need to do that. Download it from here. Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you should be able to mount your sd card using TWRP and copy a ROM across to flash.
Sent from my Evita

timmaaa said:
Ok first thing, don't ever perform a factory reset from the bootloader because it corrupts your sd card. That's why you're experiencing problems now. You need to wipe the sd card/internal storage using TWRP 2.6 to make it usable again. If you don't currently have TWRP 2.6 installed you'll need to do that. Download it from . Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you should be able to mount your sd card using TWRP and copy a ROM across to flash.
Sent from my Evita
Click to expand...
Click to collapse
So I followed all the above steps as noted; I had TWRP 2.6.3.0 earlier, I flashed the new TWRP 2.6.0.0 from the link you provided.All
successfully done.
-------------------------------------------------------------------------------------------------------
C:\Fastboot>fastboot devices
HT29WW300913 fastboot
C:\Fastboot>fastboot flash recovery "openrecovery-twrp-2.6
.0.0-evita.img"
sending 'recovery' (8000 KB)... OKAY [ 1.530s]
writing 'recovery'... OKAY [ 1.900s]
finished. total time: 3.430s
C:\Fastboot>fastboot erase cache
erasing 'cache'... OKAY [ 0.120s]
finished. total time: 0.120s
C:\Fastboot>fastboot reboot-bootloader
rebooting into bootloader... OKAY [ 0.070s]
finished. total time: 0.070s
---------------------------------------------------------------------------------------------------------
I rebooted into recovery, still came up as TWRP 2.6.3.0, then I went to TWRP reboot and chose Recovery, phone rebooted into TWRP 2.6.0.0
Tried mounting (could not select /sd card and /cache(expected as we erased it)) and ADB sideload, got the same errors as before. Unable to mount /sdcard.
Rebooted again and it displayed TWRP 2.6.3.0

Did you wipe the sd card/internal storage like I said before trying to mount it?
Sent from my Evita

timmaaa said:
Did you wipe the sd card/internal storage like I said before trying to mount it?
Sent from my Evita
Click to expand...
Click to collapse
Yes I did

And which recovery is currently installed?
Sent from my Evita

timmaaa said:
And which recovery is currently installed?
Sent from my Evita
Click to expand...
Click to collapse
Its 2.6.3.0, but in recovery when I go into option TWRP reboot and chose Recovery button, phone reboots into TWRP 2.6.0.0 and when I reboot it again, its 2.6.3.0

That's really screwy. I think you should try installing recovery again. What happens when you boot the phone normally?
Sent from my Evita

timmaaa said:
That's really screwy. I think you should try installing recovery again. What happens when you boot the phone normally?
Sent from my Evita
Click to expand...
Click to collapse
Ok good news, something happened, I tried all the steps again carefully and now I see TWRP 2.6.0.0 on boot and I am able to mount the sdcard and my computer now recognises the phone and I can manually copy files on to it.
Now in order to not mess it up anymore, should I just copy ViperXL ROM or should I use ADB sideload?

tapukakababa said:
Ok good news, something happened, I tried all the steps again carefully and now I see TWRP 2.6.0.0 on boot and I am able to mount the sdcard and my computer now recognises the phone and I can manually copy files on to it.
Now in order to not mess it up anymore, should I just copy ViperXL ROM or should I use ADB sideload?
Click to expand...
Click to collapse
Either one should be fine. If you have S-ON and the phone gets stuck on the HTC screen, you have to flash the boot.img. here's how to do it.
1. On your PC in the ViperXL.zip, take out the boot.img and put it in the directory where you have the adb and fastboot files.
2. Boot into fastboot.
3.Open cmd. Change the directory to the folder where you have those files.
4.type "fastboot flash boot boot.img"
5. Reboot the phone.
The phone should boot.
Sent from my One Xl using Tapatalk

Definitely install through TWRP. You shouldn't need to flash a boot.img because Viper uses an aroma installer which does that for you. But, if for some reason it doesn't work just flash the boot.img via fastboot.
Sent from my Evita

timmaaa said:
Definitely install through TWRP. You shouldn't need to flash a boot.img because Viper uses an aroma installer which does that for you. But, if for some reason it doesn't work just flash the boot.img via fastboot.
Sent from my Evita
Click to expand...
Click to collapse
So I flashed the boot image, then copied ViperXL and installed it through TWRP, it failed.

Exactly which error is it giving you? Did you check the md5 of the downloaded file? Are you still on TWRP 2.6?
Sent from my Evita

timmaaa said:
Exactly which error is it giving you? Did you check the md5 of the downloaded file? Are you still on TWRP 2.6?
Sent from my Evita
Click to expand...
Click to collapse
No I did not check the MD5, yes I'm on TWRP 2.6.0.0 and the errors it gives are as follows:
unable to mount '/cache'
unable to open zip
Error flashing zip

Always check the md5. It's possibly corrupt.
Sent from my Evita

timmaaa said:
Always check the md5. It's possibly corrupt.
Sent from my Evita
Click to expand...
Click to collapse
Yup redownloaded the file, checked/compared MD5, copied it back to the phone, removed the previous bad copy, flashed ROM successfully..., as per the message but system reboots to recovery.. is that expected?
And I still see both the TWRP's 2.6.3.0 and 2.6.0.0 the phone needs couple reboots in order to get to TWRP 2.6.0.0 but automatic reboot is in TWRP 2.6.3.0 whats the deal here?

I have no idea why your recovery is acting like that. Hopefully someone else can chime in on that.
Sent from my Evita

help !!

hello i have a big trouble with my htc one s, is a S4 variant and i try to boot normally but is always boot on the cwm 5.8! i reboot and is return to cwm! help me i try everything

Sounds like no ROM
From the sounds of it, it doesn't seem like you have a ROM installed.
A few things to remember when flashing new ROM's:
-Try not to ever flash dirty* (without wiping data, cache, dalvic cache, and system)
-ONLY wipe the system if you have another ROM loaded onto the internal SD card and ready to flash
-Make sure said ROM is COMPATIBLE with your phone. (Device model, in our case HBOOT [2.15, 2.16 have their differences]
-Try to update to the latest Recovery when flashing, unless stated otherwise in the ROM's OP. THEY WILL TELL YOU WHAT YOU NEED.
There is plenty more, but for your issue these may help.
Update your recovery through FASTBOOT and then use the MOUNT option to mount your SD card and add a new [compatible] ROM and try to flash it. (and if it has GAPPs, flash that AFTER you flash the ROM)

i dont flash anyrom, i just flash the recovery and write this command line "fastboot flash boot recovery*.img" (just a cut of the .img of the recovery) and after that, is allways reboot in recovery mode

le_numerik said:
i dont flash anyrom, i just flash the recovery and write this command line "fastboot flash boot recovery*.img" (just a cut of the .img of the recovery) and after that, is allways reboot in recovery mode
Click to expand...
Click to collapse
Code:
fastboot flash boot recovery.img
flashes recovery to boot sector. That's why your device boots into recovery every time. You should use
Code:
fastboot flash recovery recovery.img
to flash recovey correctly, unzip boot.img from your rom's zip and flash it with
Code:
fastboot flash boot boot.img
to be able to boot into your rom
Sent from my HTC One S

cool, but where is boot.img?

le_numerik said:
cool, but where is boot.img?
Click to expand...
Click to collapse
Like i said it's in your rom's zip. Which rom are you on?
Sent from my HTC One S

i dont use external rom's, just the android inside

ics or jb?
Sent from my HTC One S

the stock rom 4.1.3

le_numerik said:
the stock rom 4.1.3
Click to expand...
Click to collapse
Sorry, i couldn't get online for some time.
try the one on my attachment

thanks but twrp recovery try to install sideload.zip, my transfert work but twrp say sideload.zip is corrup :/ i try to reinstall twrp? im really in sh*t because this not my cell and i fu**ed up the telephone :'(
EDIT: OH GOD ok im too tired xD i try adb sideload but is fastboot i need, ok i install boot.img and is work well! THANK YOU ALL!!! ok now... need to install SuperSU he dont work
LOLL

[Q]Htc sensation Z710e help with corrupted recovery

Hello everyone,
I am a new htc sensation user and I recently rooted it using the traditional method and have been installing roms since then.
However, recently when I was installing CarbonRom Kitkat 4.4.3, the ClockWork Mod recovery told me that I cannot flash the rom ( I don't know for what reason). I thought it was something to do with my recovery. So I decided to flash 4EXT touch recovery but as I have S-on, even after giving the command through fastboot for erasing recovery and all the partitions "fastboot -w" , the command prompt gave me this error " remote access not allowed". So I thought of going on with the flashing and flashed the 4EXT recovery image through fastboot. But when I tried to boot into recovery , the phone was just stuck on the htc white screen.
As I did not erase the recovery and flashed a new recovery, i think that I have overlapped the two recoveries and have corrupted them. Now, my phone boots only into the bootloader and I also have s-on. Can anyone please tell me how to install the stock rom (as I would like to revert back to the original rom) through bootloader and fastboot? i heard about the PG58IMG method but will it work on s-on? Please help me out.

Hi, im guessing u already have recovery.img in ur fastboot folder so try this command from fastboot
fastboot boot recovery.img
Hopefully that will get u there so u can flash a rom but u will have to download 4ext recovery updater app once phone is booted to flash recovery coz doing above command only boots recovery, doesnt flash it. It works on desire s and desire so it should work for sensation too (hopefully)

jmcclue said:
Hi, im guessing u already have recovery.img in ur fastboot folder so try this command from fastboot
fastboot boot recovery.img
Hopefully that will get u there so u can flash a rom but u will have to download 4ext recovery updater app once phone is booted to flash recovery coz doing above command only boots recovery, doesnt flash it. It works on desire s and desire so it should work for sensation too (hopefully)
Click to expand...
Click to collapse
So this means that I should first flash the recovery and then boot it using the command
fastboot boot recovery.img
?? or should I just boot it up using the command . And is there anyway to give any master commands like erase a partition while on s-on? And which recovery do u prefer CWM or 4EXT?

hammadyi said:
So this means that I should first flash the recovery and then boot it using the command
fastboot boot recovery.img
?? or should I just boot it up using the command . And is there anyway to give any master commands like erase a partition while on s-on? And which recovery do u prefer CWM or 4EXT?
Click to expand...
Click to collapse
since you are on S-ON go for 4ext

rzr86 said:
since you are on S-ON go for 4ext
Click to expand...
Click to collapse
That is actually where the problem started from. i tried to install 4ext before erasing CWM and I think that caused the problem.
Do you think that recoveries can be overlapped or am i just being pointless? And can you tell me about any master commands like erasing a parition that will work with s-on?

hammadyi said:
That is actually where the problem started from. i tried to install 4ext before erasing CWM and I think that caused the problem.
Do you think that recoveries can be overlapped or am i just being pointless? And can you tell me about any master commands like erasing a parition that will work with s-on?
Click to expand...
Click to collapse
you can overwrite 4ext in top of cwm
i used to have cwm but i changed it with 4ext using only the command
fastboot fash recovery recovery.img
i didn't use any command for erasing partitions

rzr86 said:
you can overwrite 4ext in top of cwm
i used to have cwm but i changed it with 4ext using only the command
fastboot fash recovery recovery.img
i didn't use any command for erasing partitions
Click to expand...
Click to collapse
I also used the same commands but since then I am not able to get into the recovery. it just shows the htc logo on white background
Do you think it has something to do with s-on? were you on s-off when you flashed the recovery?

hammadyi said:
I also used the same commands but since then I am not able to get into the recovery. it just shows the htc logo on white background
Do you think it has something to do with s-on? were you on s-off when you flashed the recovery?
Click to expand...
Click to collapse
Nothing to do with s-on. Try flashing 4ext recovery again
fastboot flash recovery recovery.img
If that doesnt work then try what i said earlier
fastboot boot recovery.img

hammadyi said:
I also used the same commands but since then I am not able to get into the recovery. it just shows the htc logo on white background
Do you think it has something to do with s-on? were you on s-off when you flashed the recovery?
Click to expand...
Click to collapse
no was on S-ON

I saw this forum on xda which says that we can use the riff box to install partitions so can I do the same with my recovery?
http://forum.xda-developers.com/showthread.php?p=53343296

hammadyi said:
I saw this forum on xda which says that we can use the riff box to install partitions so can I do the same with my recovery?
http://forum.xda-developers.com/showthread.php?p=53343296
Click to expand...
Click to collapse
i don't think you need the riff box now
you can go first for ruu.exe to restore everything back to stock

hammadyi said:
I saw this forum on xda which says that we can use the riff box to install partitions so can I do the same with my recovery?
http://forum.xda-developers.com/showthread.php?p=53343296
Click to expand...
Click to collapse
Did u try the command
fastboot boot recovery.img
I tried it last night on my sensation and it works, boots u into recovery.

jmcclue said:
Did u try the command
fastboot boot recovery.img
I tried it last night on my sensation and it works, boots u into recovery.
Click to expand...
Click to collapse
So i just flashed stock htc sensation recovery but I do not know how to install the stock rom through stock recovery can you tell me how to do that?

hammadyi said:
So i just flashed stock htc sensation recovery but I do not know how to install the stock rom through stock recovery can you tell me how to do that?
Click to expand...
Click to collapse
connect your device in fastboot mode to pc
double click the ruu from pc and follow the on screen instructions
by the way did you do first as jmcclue told you?

rzr86 said:
connect your device in fastboot mode to pc
double click the ruu from pc and follow the on screen instructions
by the way did you do first as jmcclue told you?
Click to expand...
Click to collapse
yes i did that but as there was no recovery it would not boot but after installing the stock rom it worked

hammadyi said:
yes i did that but as there was no recovery it would not boot but after installing the stock rom it worked
Click to expand...
Click to collapse
so now you have access to the OS
did you try again to flash a custom recovery?

rzr86 said:
so now you have access to the OS
did you try again to flash a custom recovery?
Click to expand...
Click to collapse
actually it did not go according to plan and while installing the ruu it failed. so now I am looking for a signed stock rom to install through fastboot using this command
fastboot update update.zip
would that be fine?

hammadyi said:
actually it did not go according to plan and while installing the ruu it failed. so now I am looking for a signed stock rom to install through fastboot using this command
fastboot update update.zip
would that be fine?
Click to expand...
Click to collapse
read from this thread-> 4. Flashing RUU manually
http://forum.xda-developers.com/showthread.php?t=1672425
i don't know if this command exists but you can use this one
fastboot flash zip pg58img.zip
edit: by the way what failure did you have with ruu?