Hey guys here are 3 ways by whick u can find your android's IEMI No:
Dial method: From the phone keypad, enter *#06#, and your IMEI will be displayed.
The battery: Like all phones with an accessible battery, the IMEI is located on a label underneath.
Settings. From the home screen, press Menu, then Settings, then About phone, and then Status. Your IMEI (or IMSI) will be located on the resulting screen.
Hit thanks if i helped
Sent from my GT S7500
Related
When I press the green(call) button its opens the phone and automaticalt dial *# and then phone generate error the command not supported. What this behaviour and How do I changed it. I just want to load the phone and do not dial any number.
configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)
through the code ** 772 not meeting the nam2 only nam 1
**772 to enter service code area
000000 to enter programming phone number area
1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter
That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.
YAK_BR said:
configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)
through the code ** 772 not meeting the nam2 only nam 1
**772 to enter service code area
000000 to enter programming phone number area
1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter
That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.
Click to expand...
Click to collapse
To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.
A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.
Robtao said:
To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.
A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.
Click to expand...
Click to collapse
thanks a lot Robtao, I'll try your suggestion ...
===
someone else can help me?
Also, you can use the arrows and enter in SWYPE. From Geebox in post number 2 in my other Service Mode thread:
http://forum.xda-developers.com/showpost.php?p=5651846&postcount=2
Hi,
I Googled the following question and watched a YouTube vidoe where it suggested using an access code of either 0000 or 1234 which I did but it would not allow me to "pair" /access the area where the manual suggests you can change the Bluetoothing timing out to never time out.
The process I've followed is to to tap the Settings icon which brings up the next screen and then tapping the Bluetooth icon (switched on) where there is a green check mark next to the tablet model and says ready for Bluetooth.
Underneath that is PC-Admin which when you tap that you get a screen prompting you for the 4 digit access code. An access code was never set on this tablet so I tried the 0000 and then tried the 1234, to no avail.
Is there a place/way to change the access code so I can enter this area to extend the Bluetoothing to "Never Time Out"?
If one can not change the access code, then how else can I change the Bluetoothing to Never Time Out?
Thank you.
Hello,
After getting my Gear S2 back from Samsung service (I tried to wash it via the faucet water stream, it entered an infinite reboot cycle and then died - IP68 compatible huh?) I turned it on and it appeared to enter some sort of Service Menu. I haven't left this menu (nor do I know how, except maybe a factory reset?), but I would like to know how I could reenter it if I wished to, in the future. Googling for this yielded no results, and that is shocking. I wanted to post an image showing this menu, but I'm not allowed to since I've got less than 10 posts.
Thanks.
Should be able to just upload it to a photo service, like imgur and just pasting the link as text, if you wish to share it. Interested in what it looks like.
Hi. Looking for this menu in the web, i found the method for the Gear 2, and *i think* is the same. I tried succesfully in my Gear S2.
Just go to the dialer and press: *#0*#
and you can enter to a menu titled TESTMODE
You can exit from this menu pressing twice in the upper button.
Greetings.
Pressing the upper button twice does nothing. In fact, I'm unable to exit this mode even with a restart or a factory reset (via Gear Info -> Reset). Here's the link, delete the spaces.
http :// i . imgur . com / taR0NEH.jpg
I brought it back to the service and apparently they forgot to flash it. That was a default service Tizen that ships from the factory. It contains tests and it's supposed to be overwritten once the mobo is replaced.
Bixthor said:
Hi. Looking for this menu in the web, i found the method for the Gear 2, and *i think* is the same. I tried succesfully in my Gear S2.
Just go to the dialer and press: *#0*#
and you can enter to a menu titled TESTMODE
You can exit from this menu pressing twice in the upper button.
Greetings.
Click to expand...
Click to collapse
Thanks for the info about the Test Mode. The Sensor screen was fun.
Rob
Good!. I tried to find this menu but i only guessed that is for developer options or something like that (because a lot of tizen icons).
Also i tried some codes for Samsung devices and found some of them work in my Gear S2 (use at your own risk):
*#06# Serial Number
*#0*# LCD Test Menu
*#1234# Version Info
*#12580*369# Main Version
*#0228# Battery Status
*#0*# General Test Mode
*#2663# Touch Firmware Version
*#0283# Audio Loopback Control
*#9900# Log Dump
*#34971539# Camera Firmware Update
*#7353# Self Test
Greetings
Did anyone noticed...
I find an easy way to input these codes; plus others that in the dialer doesn't work.
Go to Settings>> Gear info>> Device>> Software version (push 5 times the button) A system ui with a different dialer let you input codes- it's like when we try to get the developer options on android phone.
Hope it helped!
Dear all,
I would like to request your help in this case:
I bought a Xiaomi Redmi Pro Exclusive from Aliexpress, this seller: https://www.aliexpress.com/item/Orig...763899877.html
But in one minute the capacitive buttons stop working, the rest works fine. When I do hard reset, it works during few minutes but once I press the buttons, they stop working. I am afraid it is a problem related to the LCD... Did you have any problem similar?
My problem is that the seller is rejected any proposal. I made a video he asked me for:
1>> Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. We need record it.you can not show the IMEI in this way .please show the IMEI on the phone box and the original film with stickers if you still keep them. We will accumulate the data to improve our "Quality Control".
2>> set the phone to "factory setting" ( you may backup the data before recording the video)
3>> Press " about phone " to show us the version of the MIUI.
4>>Dial *#*#6484#*#* to test "Key"
4>> Show us the problem about the button can not use in the video.
But then I received this answer:
I have checked the video you offered.
1.But sorry for we can not found the imei number in our database. WTF????
2.For the button.i have contacted with the xiaomi after-sale department,
The unofficial film could also effet the button.
3.With the video you offered.
The way you check the button is not right. WTF????
You need to press the button directly.not press the display. WTF????
So please make a new video to show us steps below:
1.Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. and please show the IMEI on the phone box and the original film with stickers if you still keep them. we need to record it.
2.Remove the flim to press the button,
3.Dial *#*#6484#*#* to test "Key" (When test . please press the button directly to show the issue.)
Then upload the video to Aliexpress.
I will do it again, but I would be glad if you could give any advice on how to answer and make the video. If there is not an agreement I am afraid I would have to buy the LCD (around 70 pounds) and give them to a corner shop to do it as I do not want to take the risk.
Thanks,
Jose
josemolto said:
Dear all,
I would like to request your help in this case:
I bought a Xiaomi Redmi Pro Exclusive from Aliexpress, this seller: https://www.aliexpress.com/item/Orig...763899877.html
But in one minute the capacitive buttons stop working, the rest works fine. When I do hard reset, it works during few minutes but once I press the buttons, they stop working. I am afraid it is a problem related to the LCD... Did you have any problem similar?
My problem is that the seller is rejected any proposal. I made a video he asked me for:
1>> Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. We need record it.you can not show the IMEI in this way .please show the IMEI on the phone box and the original film with stickers if you still keep them. We will accumulate the data to improve our "Quality Control".
2>> set the phone to "factory setting" ( you may backup the data before recording the video)
3>> Press " about phone " to show us the version of the MIUI.
4>>Dial *#*#6484#*#* to test "Key"
4>> Show us the problem about the button can not use in the video.
But then I received this answer:
I have checked the video you offered.
1.But sorry for we can not found the imei number in our database. WTF????
2.For the button.i have contacted with the xiaomi after-sale department,
The unofficial film could also effet the button.
3.With the video you offered.
The way you check the button is not right. WTF????
You need to press the button directly.not press the display. WTF????
So please make a new video to show us steps below:
1.Please turn on the cellphone and dial *#06# to show the IMEI number and make sure the IMEI number is clear in the vedio. and please show the IMEI on the phone box and the original film with stickers if you still keep them. we need to record it.
2.Remove the flim to press the button,
3.Dial *#*#6484#*#* to test "Key" (When test . please press the button directly to show the issue.)
Then upload the video to Aliexpress.
I will do it again, but I would be glad if you could give any advice on how to answer and make the video. If there is not an agreement I am afraid I would have to buy the LCD (around 70 pounds) and give them to a corner shop to do it as I do not want to take the risk.
Thanks,
Jose
Click to expand...
Click to collapse
Download lenovo compainion mobile from play store and do the touch screeen test and tell me the results
Since you have a mi device, I don't know weather this app will work for you or not but better give it a try
Regards milkyway3
milkyway3 said:
Download lenovo compainion mobile from play store and do the touch screeen test and tell me the results
Since you have a mi device, I don't know weather this app will work for you or not but better give it a try
Regards milkyway3
Click to expand...
Click to collapse
Ok forget about it just download the touchscreen test app from the playstore and tell me the results
Regards milkyway3
milkyway3 said:
Ok forget about it just download the touchscreen test app from the playstore and tell me the results
Regards milkyway3
Click to expand...
Click to collapse
See the screenshot below