configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)
through the code ** 772 not meeting the nam2 only nam 1
**772 to enter service code area
000000 to enter programming phone number area
1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter
That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.
YAK_BR said:
configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)
through the code ** 772 not meeting the nam2 only nam 1
**772 to enter service code area
000000 to enter programming phone number area
1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter
That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.
Click to expand...
Click to collapse
To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.
A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.
Robtao said:
To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.
A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.
Click to expand...
Click to collapse
thanks a lot Robtao, I'll try your suggestion ...
===
someone else can help me?
Also, you can use the arrows and enter in SWYPE. From Geebox in post number 2 in my other Service Mode thread:
http://forum.xda-developers.com/showpost.php?p=5651846&postcount=2
Related
Anyone knows how to unlock Vodafone RIM BlackBerry 7230 please?
BB7230
Procedure for accessing SIM unlock.
Warning! The Wireless Mode MUST BE OFF before
performing the given SIM Unlock instructions in order
to avoid causing the device from becoming defective.
How to turn Wireless Mode Off:
1. Scroll to the Airplane Icon (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.
How to SIM Unlock the device:
1. Go to the "Options" screen
2. Select the "SIM Card" option
3. Type ALT-MEPD (hold ALT key while typing the 4
letters, M-E-P-D)
4. Release the ALT key, it should then display a list
"SIM, Network, Network Subset, etc..."
5. To select "Network" type ALT-MEPE (since E is the
key that gives 2 when shifted)
6. Release the ALT key, it should then ask for the
code
7. Enter the unlock code
Now what's left is the code.
Hello everyone,
I own the terminal in question (DX900 VER A147 ITA 040 0502 2009/03/04 12:42). As I imagine you know, this is a DualSIM Phone.
Currently, my main problem is to assign to a key the ability to make as "main" a SIM rather than another.
To do this, on the phone, you must press a key sequence and have a few menu items choices:
Phone (left softkey),
Menu (right softkey),
Down (via the correspondig key on the key pad)
Enter (via the central key on the key pad)
At this point, you have the ability to choose which SIM to activate, the first one (first line above) or the second one (second bottom line).
I tried to achieve this through MortScript and I have succeeded. However, firstly the process is rather slow (I had to insert a pause of 250ms between the various commands to get it to work correctly), secondly the process does not happen in background and finally the process works only on the "today" screen.
Someone has any advice about it, whereas I am not very familiar with programming?
Thanks in advance.
Since "...help yourself that God help you...", "...aiutati che Dio t'aiuta..." (Italian), "...aide toi et le ciel t’aidera..." (French) , I wrote this little program, which I called "SIM_Switch" and which is used precisely to instantly change the main calling SIM.
Just map it on an hardware button and on every press of that button, the main calling SIM change instantly from "SIM 1" to "SIM 2" and vice versa.
No "Pop-up", no "Message Box": just have a look at the Today screen and see how the color of the Operator name of the active SIM change from white to orange, and vice versa, indicating the active calling SIM change.
Hi from Italy
I was trying to fix my 3-4 Ring delay, and tried the Slot Cycle Index change, but no luck.
Anyway, not sure if there is anything in the Service Mode that may help us arrive at a better phone, but there are some challenges using it with the Omnia 2. It doesn't have a D pad or enter button.
Maybe somebody else has a better idea, but I used AEButton + to create (from button 1) a "Down arrow", a "Right arrow", and an Enter button. Since you need to hit down about 65 to 70 times before arriving at Slot Cycle index, I used 1 single press for Down, 2 presses for Right, and 3 for Enter.
Then you can modify settings in the Service Menu, including the following:
1. Dial **772
2. Enter the Service Code 000000 (six 0's) and tap OK
3. Push the directional pad down until you see a screen that says:
SVC Mode NAM1
End of BASIC NAM
EXIT
4. Push the directional pad right so that "Exit" becomes "More"
5. Press the action (Enter) button to enter the additional settings menu.
6. scroll down about 70 times. You will get the the "Slot cycle" screen and the default value will be "2".
1 or 0 should be better.
In case you want to change to 13k Vocoder:
1. Dial **772
2. Enter the Service Code 000000 (six 0's) and tap OK
3. Push the directional pad down until you see a screen that says:
SVC Mode NAM1
End of BASIC NAM
EXIT
4. Push the directional pad right so that "Exit" becomes "More"
5. Press the Enter button to enter the additional settings menu.
6. Press down 1 time to get to the screen that says:
SVC Mode NAM1
Orig. SVC OPT
EVRC
7. The default is set to EVRC. To change to 13k Vocoder press right on the d-pad once.
8. Then press the action button once to save the change.
9. Finally, press the left soft key "Exit" to exit the service menu.
I haven't found much that has helped me so far, but maybe someone smarter and braver than me can find some better settings in there.
For d pad on the I920, use the swype d pad. Its already in the phone.
I knew I would hear from somebody with a better idea eventually. Thank you very much. Very cool.
On my stock Verizon i920, the Vocoder is set to EVRC-B and the only other choice listed is EVRC.
On the last screen for slot cycle, I can't figure out how to change it from "2". Center D-pad (Swype) doesn't select, Enter exits the program, as does "Right arrow".
Anyone have success with this?
MIUI 12.0.2 Global
Someone knows how to enter Settings or Search in settings or
Open TalkBack menu (I know shortcut is available as Vol+ Vol- but default is off)
with a USB keyboard connected to the phone?
It is a keyboard shortcut or a sequence of keys.
Under Win + / there is a shortcut list, but not there.
OKAY. After hours of rummaging around, I found a way.
I attach the keyboard to the phone.
Standby phone, pin locked.
I press 2xSPACEBAR, enter the pin, ENTER
(I'm on the desktop)
I press WINDOWS + N, after a while 5xTAB, ENTER
(I'm in settings)
and if someone else wanted TalkBack to turn it on even further:
ENTER
I type TAL
ENTER
SPACEBAR
SPACEBAR
(you hear a voice saying where I am currently on the menu)
WINDOWS + BACKSPACE
WINDOWS + BACKSPACE
My bestfriend is on a mi 9, and she has a broken screen.
For my phone (mi 11) I managed to get to SETTINGS with FN+A keys (oppens search bar) then typing settings and enter.
I will try activate talkback as you suggested, or maybe directly usb file sharing if I can, I'll tell you, you may have saved her her datas
cant manage to delete this post, posted same message twice
Anyone know how to enable the Engineer Mode on the S22 Ultra?
The standard Android shortcut key *#*#3646633#*#* doesn't work, and the other suggestion of going to the Service Menu and typing "Q0" in key entry doesn't work either.
Thanks.
This seems to be a solution posted on XDA but I cannot get it to work? I assume that's the upper case letter Q and lower case letter o I'm supposed to type? I type it into the box but it just takes me back to the SERVICE MENU with BASIC INFORMATION, [1] SIM INFORMATION [2] SIM state is not ready.
"Open the dial pad and enter *#0011#A window will pop up saying you've entered 'Service Mode'Click on Key Input (on the right hand corner of the screen)Enter the 'Qo' key. "
looks more like Q0
in "words" QZero
I've tried every combination of the letter Q and number Zero, as well as the letter O and nothing works. Can you try to see on your phone?
See this post for how to access service menu (engineering mode).
Wow! Seems complicated but will give it a go. Thanks!