Unlock Vodafone RIM BlackBerry 7230 - General Topics

Anyone knows how to unlock Vodafone RIM BlackBerry 7230 please?

BB7230
Procedure for accessing SIM unlock.
Warning! The Wireless Mode MUST BE OFF before
performing the given SIM Unlock instructions in order
to avoid causing the device from becoming defective.
How to turn Wireless Mode Off:
1. Scroll to the Airplane Icon (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.
How to SIM Unlock the device:
1. Go to the "Options" screen
2. Select the "SIM Card" option
3. Type ALT-MEPD (hold ALT key while typing the 4
letters, M-E-P-D)
4. Release the ALT key, it should then display a list
"SIM, Network, Network Subset, etc..."
5. To select "Network" type ALT-MEPE (since E is the
key that gives 2 when shifted)
6. Release the ALT key, it should then ask for the
code
7. Enter the unlock code
Now what's left is the code.

Related

Service Mode, Slot Cycle Index, 13K Vocoder

I was trying to fix my 3-4 Ring delay, and tried the Slot Cycle Index change, but no luck.
Anyway, not sure if there is anything in the Service Mode that may help us arrive at a better phone, but there are some challenges using it with the Omnia 2. It doesn't have a D pad or enter button.
Maybe somebody else has a better idea, but I used AEButton + to create (from button 1) a "Down arrow", a "Right arrow", and an Enter button. Since you need to hit down about 65 to 70 times before arriving at Slot Cycle index, I used 1 single press for Down, 2 presses for Right, and 3 for Enter.
Then you can modify settings in the Service Menu, including the following:
1. Dial **772
2. Enter the Service Code 000000 (six 0's) and tap OK
3. Push the directional pad down until you see a screen that says:
SVC Mode NAM1
End of BASIC NAM
EXIT
4. Push the directional pad right so that "Exit" becomes "More"
5. Press the action (Enter) button to enter the additional settings menu.
6. scroll down about 70 times. You will get the the "Slot cycle" screen and the default value will be "2".
1 or 0 should be better.
In case you want to change to 13k Vocoder:
1. Dial **772
2. Enter the Service Code 000000 (six 0's) and tap OK
3. Push the directional pad down until you see a screen that says:
SVC Mode NAM1
End of BASIC NAM
EXIT
4. Push the directional pad right so that "Exit" becomes "More"
5. Press the Enter button to enter the additional settings menu.
6. Press down 1 time to get to the screen that says:
SVC Mode NAM1
Orig. SVC OPT
EVRC
7. The default is set to EVRC. To change to 13k Vocoder press right on the d-pad once.
8. Then press the action button once to save the change.
9. Finally, press the left soft key "Exit" to exit the service menu.
I haven't found much that has helped me so far, but maybe someone smarter and braver than me can find some better settings in there.
For d pad on the I920, use the swype d pad. Its already in the phone.
I knew I would hear from somebody with a better idea eventually. Thank you very much. Very cool.
On my stock Verizon i920, the Vocoder is set to EVRC-B and the only other choice listed is EVRC.
On the last screen for slot cycle, I can't figure out how to change it from "2". Center D-pad (Swype) doesn't select, Enter exits the program, as does "Right arrow".
Anyone have success with this?

how to view the nam2 in omnia i910 Verizon CDMA?

configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)
through the code ** 772 not meeting the nam2 only nam 1
**772 to enter service code area
000000 to enter programming phone number area
1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter
That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.
YAK_BR said:
configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)
through the code ** 772 not meeting the nam2 only nam 1
**772 to enter service code area
000000 to enter programming phone number area
1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter
That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.
Click to expand...
Click to collapse
To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.
A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.
Robtao said:
To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.
A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.
Click to expand...
Click to collapse
thanks a lot Robtao, I'll try your suggestion ...
===
someone else can help me?
Also, you can use the arrows and enter in SWYPE. From Geebox in post number 2 in my other Service Mode thread:
http://forum.xda-developers.com/showpost.php?p=5651846&postcount=2

[Q] NEED HELP in NETWORK LOCK I have code RAT_FREE_SUPPORITING ON

I have a S4 i337 for AT&T
FIRST THE ONLY WAY TO GET TO THE MAIN MENU &
ITS been the only way I could get to the MAIN MENU with the [1] UMTS
DIAL PAD *#0011# -- MENU press BACK -- MENU press KEY INPUT then 1 --MENU again press KEY INPUT Q (capital ) --
MENU again press KEY INPUT 0000 ---------> and that gets me to the MAIN MENU and follow the steps as before
UMTS MAIN MENU press [1] DEBUG SCREEN etc etc etc
now when I get to NETWORK LOCK my phones reads [1] PERSO SHA256 info [2] RAT_FREE_ SUPPORITING ON ????? so
using MENU - BACK I go back to the UMTS MAIN MENU
there I press [6] COMMON -[6] NV REBUILD --[4] RESTORE BACK-UP and has GOLDEN BACKUP EXITS - YOU CAN RESTORE CAL/NV and it does turn off and restarts BUT I PUT A DIFF SIM CARD AND IT STILL ASK FOR A UNLOCK CODE -----???? HELP ?????
I have no history of phone and using a H2O sim card but was told that it works like att but I never activated it -- or should I buy a att sim card and try again I want to go to new cricket
THANKS in advance

Google 2FA Recovery, black Screen. I can unlock S6 with keyboard. How activate ADB?

Hello,
I have a Samsung S6 with android 7.0 running on it. (latest stock firmware) The screen got cracked this week and the digitizer and OLED are not working anymore.
I've got some 2 FA keys in google authenticator that i did not backup. Now i know that i have to keep the QR code safely... but that is too late in this case. I don't want to buy a new screen...
I did manage to get a full backup of my phone by attaching a keyboard with an OTG cable. but this will not recover the 2FA keys in Google Authenticator.
How you can unlock your phone with a keyboard:
1. attach a keyboard with an OTG cable.
2. press the 'esc' button' and 'backspace' button
3. insert your password and press enter. You should hear the unlock sound. (you can unlock with the fingerpint from now on, if it was set)
I did activate developer options before but i disabled it when i'm not using it. So i have to activate it again.
I think i can enable Developer mode blindly by following these steps. The phone needs to be unlocked.
1. typ one letter. This will bring up google search. press backspace and delete (just to be sure it is blank). Now type 'Settings'
2. Press the down key once
3. Press enter
4. press the down key for 10 seconds (this should focus the item on the last option in the list, which is 'developer mode' )
5. press enter
6. press up once
7. press right once
8. enter
developer options should now be enabled.not sure how i can check this tho. I checked if my computer can find my phone. I can access the internal memory because the phone is unlocked.
i asume developer options is enabled... The next step is re-activating debugging mode in order to mirror the screen. But 'adb devices' does not show any device yet. This means 'debugging mode' is still deactivated.
So i'm trying to enable 'Debugging mode' within the 'developer options'.
I searched on youtube to see how the menu looks like in Android 7 on a S6 so i can figure out how many keys i need to press in order to re-activate USB debugging. But i seem to be stuck on this step.
My question: can somebody make screenshots or a video from a samsung S6 (with android 7.0) device with a keyboard attached that shows how many key presses are needed to activate USB debugging?
When i'm in the developer options menu i think i have to press 9 times down, hit enter, then press the right key once and then hit enter again.
Can someone confirm that this is correct?
The RSA keys for my pc were already accepted previously. so that should not be an issue. unless i hit the 'revoke keys' options by accident... (i hope not!)
if anyone knows an other way to activate USB debugging without erasing the whole phone, please tell me. I need access to my 2FA keys. :crying:
edit:
i'm not sure if the steps to enable Developer mode are working. I'm reproducing the steps on an old S5 phone. I now realize that there are internet suggestions when typing "Settings' on the S5 model. I need to press 4x down then enter. hmmm... These suggestions only pops up when wifi is enabled. I can ping my S6 phone. So WiFi is enabled on my broken s6.
---
It would be awesome if someone can record a video that shows me (and potentially others) how to install and run 'SideSync' through keystrokes. on an S6 with android 7.0. SideSync can then mirror and control the screen on a pc..
I'm going to try this blindly for now... fingers crossed
edit2: it seems that SideSync needs a code that is shown on the S6 screen. damn it. Searching for other solutions...
Kind Regards,
Vincent

Miui keyboard usb - settings shortcut

MIUI 12.0.2 Global
Someone knows how to enter Settings or Search in settings or
Open TalkBack menu (I know shortcut is available as Vol+ Vol- but default is off)
with a USB keyboard connected to the phone?
It is a keyboard shortcut or a sequence of keys.
Under Win + / there is a shortcut list, but not there.
OKAY. After hours of rummaging around, I found a way.
I attach the keyboard to the phone.
Standby phone, pin locked.
I press 2xSPACEBAR, enter the pin, ENTER
(I'm on the desktop)
I press WINDOWS + N, after a while 5xTAB, ENTER
(I'm in settings)
and if someone else wanted TalkBack to turn it on even further:
ENTER
I type TAL
ENTER
SPACEBAR
SPACEBAR
(you hear a voice saying where I am currently on the menu)
WINDOWS + BACKSPACE
WINDOWS + BACKSPACE
My bestfriend is on a mi 9, and she has a broken screen.
For my phone (mi 11) I managed to get to SETTINGS with FN+A keys (oppens search bar) then typing settings and enter.
I will try activate talkback as you suggested, or maybe directly usb file sharing if I can, I'll tell you, you may have saved her her datas
cant manage to delete this post, posted same message twice

Categories

Resources