Hello all,
I was running ViperXL 3.2.8, but i could not connect to a pc to access unless in bootloader so i went back to 3.2.6 works fine but now i cannot use data over 4g 3g or 2g. I then tried installing (Using venomhub) a new radio nothing changed then did ElementalX kernel it killed my phone and it took me two days before i could either get it to boot or it would boot but .com processes were crashing.
I am not back in to 3.2.6 but as i said i have no data please could someone advise a fix.
Thank you in advance.
Are your APNs correct?
Sent from my Evita
Still new to Android even after 6 years, APN's were blank but even after I manually input the details and hit save the list stays empty.
Just rebooting and trying again
Try flashing a different ROM and see if you get data.
Sent from my Evita
It looks like that is what im going to have to do.
Thank you for your help.
Related
Ok so the problem i am having is i am unable to get wifi to work without the phone saying error next to wifi. My One S has the lastest radio and HBOOT 1.06. So i understand that i do not need to flash the boot.img from fastboot, but i still do to make sure that it is flashing ok. That does not fix the problem. I have even used the stock T-MO nanodroid to go back to stock rom and i still flash the boot.img file from fastboot still not wifi. Everything on the phone works fine but wifi. After the phone boots up wifi is already on and it does scan and see networks. When i try to connect to one it doesn't connect, if i toggle wifi off and turn it back on again it gives me a error when turning wifi on. Only thing i am wondering is, i do not have a SIM CARD in the phone right now since i do not have a micro sim right now. Does the phone need a SIM CARD in it for wifi to work. I spent 3 hours last night flashing different roms and boot.imgs trying to get wifi to work. All with errors still. Anything ideas right now would be great.
edit: forgot to add when i flash the boot.img in fastboot i always get a finished with no errors as if the boot.img is flashing fine.
wifi problem
I just pulled my sim from my One s and found i had no problem with the wifi connection. What kind of error is it, do you have any code?
No code. If I do a full wipe the wifi scans for a network sees them but does not connect. Then it will turn off on its own and just say error next to the on and off button. It does it with every rom and kernel combo I have tried. Even going to back to the full stock rom it does it. I know the kernel is flashing since it shows the right kernel under about.
Sent from my Galaxy Nexus using Tapatalk 2
i've encountered the same issue, but only when i flashed an overclocked kernel. and when i flashed the kernel back the error went away. have you tried unrooting?
I was looking for a full stock unrooted rom and but couldn't find anything other then a nanodroid of stock rooted. I was thinking of just flashing the ruu and seeing if that fixes it. Not sure at this point because I have tried every kernel and rom all which do not work so far. I have also formated everything thinking maybe something was left behind no go as well. I know wifi works since I used the phone for a few days before I Dev unlocked it and rooted it. I also setup the phone on wifi with no sim card when I pulled it out of the box at the start. Something happen after the unlock and rooting part. Could updating the hboot help at all.
Sent from my Galaxy Nexus using Tapatalk 2
I fixed it. I flashed the TMO 1.84 RUU and wifi is working again. It updated the HBOOT to 1.09 and everything is stock with working wifi. I am starting all over to see if i can get it working with a rom as well now.
Alrighty, I have a One S S4, rooted, running ViperOneS 1.2.1.
Not the first time I've run a custom on here, I've been bouncing back and forth between Viper and Cyanogen, usually without issue. Normally, I've been using CWM recovery...
My problem is that I can't get a new radio to install. I've reinstalled Viper a few times, full wipe and all, reinstalled CWM, and finally, just tried using TWRP. CWM says that it updated, but nothing changes, TWRP just gets stuck saying that it is updating, but never does (have to force a shutdown)
So...anybody else run into this problem? I can't find an answer anywhere, and I have no idea what to do next, because I want to keep Viper on here, but right now, my mobile is alright, but I get no WiFi (and the solution that I'm being told is to install a new radio (would that even fix a WiFi issue))
Please help...
Mage42384 said:
Alrighty, I have a One S S4, rooted, running ViperOneS 1.2.1.
Not the first time I've run a custom on here, I've been bouncing back and forth between Viper and Cyanogen, usually without issue. Normally, I've been using CWM recovery...
My problem is that I can't get a new radio to install. I've reinstalled Viper a few times, full wipe and all, reinstalled CWM, and finally, just tried using TWRP. CWM says that it updated, but nothing changes, TWRP just gets stuck saying that it is updating, but never does (have to force a shutdown)
So...anybody else run into this problem? I can't find an answer anywhere, and I have no idea what to do next, because I want to keep Viper on here, but right now, my mobile is alright, but I get no WiFi (and the solution that I'm being told is to install a new radio (would that even fix a WiFi issue))
Please help...
Click to expand...
Click to collapse
It's probably the hboot you have on your phone not letting you flash the radio ? As for Wi-Fi you probably need to just flash the Wi-Fi partitions. You need to find out what hboot you're on as well as if you don't know how to check which radio you're on you should look into that. About phone software baseband and more something like that.
Sent from my HTC One S using xda premium
ickedmel said:
It's probably the hboot you have on your phone not letting you flash the radio ? As for Wi-Fi you probably need to just flash the Wi-Fi partitions. You need to find out what hboot you're on as well as if you don't know how to check which radio you're on you should look into that. About phone software baseband and more something like that.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
As far as radio, it's 1.08ts.50.02.16_10.08e etc
As far as hboot version....nothing has changed since the time I could reprogram my radio
I'm pretty versed with the phone, I'm asking here, because you will know more than I do...but I know my some of my phone, and I definitely know how to program...but I don't experiment as much as I want to, and I want to know how to fix my phone..
sorry, little drunk at this time, don't want to sound like an ass...
If I think that I'm missing a basic step, I'll ask =)
The hboot, as far add I've know hasn't changed, but I don't know what does. Old versions of recovery, no luck. Had programming issues, get stuck in booloops etc, make it work right...n dint know why the radio won't program out of nowhere =(
From the beginning.
Unlocked
EVITA PVT SHIP S-ON RL
HBoot 1.14.002
Radio 0.19as.32.09.11_2
OpenDSP v29.1.0.45.0622
eMMC-boot
June 11 2012, 14:36:28
Click to expand...
Click to collapse
I was running a ViperRom my camera light was staying on, I tried everything to get it to turn off. I decided it been a few month it was time to get a new ROM anyways. I tried installing Gummy Nightly's was having problem with the install read about getting a different version of TWRP so I updated to 2.6.3.0 I believe I had 2.1.0.0. Gummy still won't work, so I changed plans and want for the Viper XL Rom 4.2.0 this led to a bootloop not getting past the Viper splash screen. I thought I might as well just with one of my backup. So, i wiped and loaded a backup. This is the problem, it will load up the ROM for about 30 seconds before the icon all appear it will reboot. I've now been working on this for 2 days. I've went through each post and tried the advice each person was given, I've tried to Flash a different Rom, the Viper Rom I had when I had the Camera Light Issue, each time I get about 30 second into the Rom Load and reboot. (One of the ROMs would let me access the SDCARD0 but found a work around that.) I've let the phone sit charged for 2 hours looping. I've turn it off and let it sit charging. The next thing I'm going to try to to downgrade the TWRP. If anyone can give me some advice, something new and different to try that would be great. Thanks!
Cheers
xDrFirefly
talked to one of my buddy and said the downgrade would be pointless so, i'm trying to flash a stock rom at the moment.
When you changed to TWRP 2.6.3.0 was it the official version or the unofficial modified version?
Sent from my Evita
Recovery: Custom TWRP 2.6.3.0 w/selinux support
And what errors did it give you when trying to install Gummy?
Sent from my Evita
The install failed. I tried it multi times, and even d/l it again to see if that would make a difference. Nope.
Here is what i've done so far. I factory reset everything. Found a stock rom flashed it on. For the two hours I used it seemed to work fine. I then flashed CleanRom everytime I would open Ti Backup the phone would reboot. I flashed another ROM, was getting the signal drop snagged the Beastmode Kernel it keep failing everytime I tried to flash it. Factory Wiped EVERYTHING again. Flashed the Stock, then Flashed ViperXL (then went to bed) in the morning still had signal bars, so far had two reboots, one when I was uninstalling apps using Manage apps feature, and another time when I was in the Venom HUB app. But at the moment the phone seems to be working. The battery life is ****. In the 30 mins I've had the phone unplug i've down to 89% and all I did was delete a few apps, and move some stuff to the home screens. Hopefully it will get better with time.
Side Note: To anyone reading this. I got the AT&T HTC XL preorder. I doubt I will ever do that again. In all the years I've been flashing and messing with phone. ( My first phone I messed with was a Sidekick ) I've never had so much trouble as I had with this phone. ( HTC Tilt, Fuze and Tilt 2 never had this kinda problem ) a friend of mine whom waited a year to get the XL has never had any of the problem I've had. Just my thoughts. Thanks and I hope I won't have to be asking anymore question.
When, I have more time and such I'm going to try to flash Gummy. If I get the same error message for it or anything else I will post it here.
Cheers
-Dr FF
I get that it failed, I asked what error you got. Your battery life on Viper will improve, just let the ROM settle in for a few days. I've had this phone since just after release and I've never had a single problem with it, not one. There are quirks that come with any device but if you do the proper research and know what you're doing you shouldn't have issues.
Sent from my Evita
You might also want to try setting a fresh install up without restoring any apps or installing any social networking apps. Those are possibly the worst for fc's, random reboots, and bad battery life. At least for me that's how it is.
jacobas92 said:
You might also want to try setting a fresh install up without restoring any apps or installing any social networking apps. Those are possibly the worst for fc's, random reboots, and bad battery life. At least for me that's how it is.
Click to expand...
Click to collapse
I will try this. Sounds like a very logical plan.
timmaaa said:
I get that it failed, I asked what error you got. Your battery life on Viper will improve, just let the ROM settle in for a few days. I've had this phone since just after release and I've never had a single problem with it, not one. There are quirks that come with any device but if you do the proper research and know what you're doing you shouldn't have issues.
Sent from my Evita
Click to expand...
Click to collapse
Timmaaa I just get annoyed how easy this phone get caught in bootloops. That is really my main complaint. I know it's trivial. -- I really don't know what caused the fail when I tried to install Gummy. I wiped and tried it a few time and I keep getting failed. I normally try twice then find something else. To quote Little Britain "Computer says no".
xdrfirefly said:
Timmaaa I just get annoyed how easy this phone get caught in bootloops. That is really my main complaint. I know it's trivial. -- I really don't know what caused the fail when I tried to install Gummy. I wiped and tried it a few time and I keep getting failed. I normally try twice then find something else. To quote Little Britain "Computer says no".
Click to expand...
Click to collapse
Computer always says no for a reason. You need the right recovery installed to flash KitKat ROMs, you also need to check the md5 of every ROM you download before you flash it. What I'm saying is there's no reason Gummy wouldn't install if you have done everything correctly.
I got my one SV k2_cl from boost a little over a month ago and got the bootloader unlocked and rooted, working fine until one morning it wouldn'tmake calls or texts. I tried to factory reset and when I tried to boot got stuck at the HTC logo. Took me 2 weeks to get it to even flash a Rom on here that will somewhat work. I've got WiFi and partial 3g 4g connectivity but no voice at all. When I try to use the phones its activation tool-error, tried manually programming phone- nothing. I'm stumped. Can someone please help me out here. Don't want to have to buy another phone if I can help it. The only guess I've got at the moment is that if I could get a stock original rom to flash I'd be good to go probably and just hold out on doing anything else to it until after the kitkat ota is launched. The few stock roms I've tried either wouldn't download for some reason or just won't flash right. Thanks in advance for any help guys. I've always been more of a hardware geek more so than software but I can usually muddle through following guides of course.
I'm not much into boost, but did you try to flash the available RUU?
help...
As a matter of fact I have tried that and unfortunetly the installer locked up on a reboot of the phone because the phone wants to do the "Android is upgrading # of #" on every boot. That was why I was thinking since adb/fastboot and the HTC One Toolkit all sorta work that if I could get ahold of a working stock rom to flash on there and I have a stock CWM backup still on my laptop from when I first got the phone rooted and everything working. But of course thanks for the tip anyway. I wish that would work. It seems to be the easiest way to install back to stock.
Hello, having some troubles with data. Phone calls and text work fine. I have an HTC one m8, viperone rom, on PPC. A few nights ago I let my battery completely drain to the point that it would get stuck on boot screen. So I did a factory reset, that got me out of the bootloop but since then I only have data when im on 1x, nor 3g or 4g, says mobile data disconnected. I have been using roms for a few years, no expert but i know enough to check the basic when troubleshooting. So next i tried installing a new sim card, same issue. Next I flashed the same 5.1 rom, same issue. I downloaded the latest rom from viper, 6.1 installed fine but now no data at all. So tried all the reboots, reinserted the card, airplane mode, modes, etc.....
Do i need to install a new radio firmware? I currently have the 1.12
Or did I mess up the divice with the battery completely draining?
Hopefully its a noob error I can fix with some advice from you guru's
Much thanks in advance!!
Bill
Duplicate.
Thread closed.