Related
Hi all,
A week ago I bought a brand new Desire S and installed latest CM 7.1 stable following the guide on cyanogemod Desire S Wiki using revolutionary 0.4pre4. Everything was smooth and nice, I flashed ROM and GAPPS and my phone is working absolutely perfectly... but there is one little problem...
I am using Desire to fetch my mails from 2 mailservers using IMAP every 30 mins. But when the phone is switching between network modes i.e. HSDPA -> EDGE or EDGE -> GSM or any other way, I am disconnected from operator network for about 10 seconds until the network mode changes and everything is fine after that, until there is another network mode switch.
This happens for me about 10 times a day, so my phone sometimes appears that It is turned off for people who want to call me. Immediately after connecting to network I get a missed call SMS from my operator.
Interesting thing is, that when I disable email fetching, disable background data transfer and disable network data, the phone works fine without "blackouts".
Can someone help me with this problem? Maybe a radio issue?
Some more info:
ROM: Cyanogenmod 7.1.0 Desire S
Recovery: Revolutionary CWM v4.0.1.4
HBOOT: 6.98.1002
Kernel: 2.6.35.14-cyanogenmod+ [email protected] #1
Radio: 20.28I.30.085AU_3805.06.02.03_M
There is a newer radio-file online.
Maybe it's solving your problem.
I'm using MIUI and never had such problems, but i'm interested in flashing CM, so please report if the problem is gone by flashing newer radio!
Which radio version are you using?
Today I am testing 2G only switch so I am on EDGE data only.
Flashing radios is safe......, but a bad radio flash will instantly brick your phone.
You are using 1.47.401.4 radio, try updating to the 2.10.401.5 one.
Thanks for reply.
Shoud I flash something else with the radio?
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Another I have is ftom OTA update zip file OTA_Saga_S_HTC_Europe_2.10.401.8-1.47.401.4_release_225210fmxlt12djw1sr7y5.zip where is one radio.img in formware.zip file too - version unknown
So Which one to flash?
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
MyroLM said:
Shoud I flash something else with the radio?
Click to expand...
Click to collapse
no need
MyroLM said:
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Click to expand...
Click to collapse
this file is what ur looking for! check md5-checksum before flashing!
MyroLM said:
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
Click to expand...
Click to collapse
Both will work, i'm using method by using bootloader normaly
Strangely I had the same issues as you on Endymion.
Then I updated radio to the latest.
It worked well.
Then I went to CM7. It was fine for a while, but now I'm losing signal with no 3G bars and its not switching automatically to 2G like it should when It has no 3G signal!
EDIT:
After really reading your post, I realise my issue is no way like yours! Yours seems really bad. Update your radio.
-------------------------------
Sent from my HTC Desire S
So, here we go with the results
I flashed 20.4801.30.0822U_3822.10.08.04, md5sum checked OK, update sucess, but phone with no signal...
I flashed 20.48.30.0822U_3822.09.08.20, md5sum checked OK, update sucess, but phone with no signal again...
I flashed 20.28I.30.085AU_3805.06.02.03 back, md5sum checked OK, update sucess, but phone with no signal again...
... what now ... ?
After each flash wiped cache and Dalvik...
in your telephone-info there is shown the new radio after every flash?
do you have removed the batterycover, because there is integrated the antenna of your device!
mouzzza said:
in your telephone-info there is shown the new radio after every flash?
Click to expand...
Click to collapse
Yes, correct number every time.
mouzzza said:
do you have removed the batterycover, because there is integrated the antenna of your device!
Click to expand...
Click to collapse
No, the cover is at its place where it should be. Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now.
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
MyroLM said:
Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now
Click to expand...
Click to collapse
in your area 3g is actually available?
may it helps to go outside, to find your net for the first time!
did you set an accesspoint for 3g?
may you have to set automatic settings, rather than 3g/2g-only?!
MyroLM said:
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
Click to expand...
Click to collapse
using same hboot as you, never had problems on flashing radio-files!
yes, in my area there is 3g, when I turn off 2g only switch there is a problem described in my first post, so i am on 2g for now just to keep phone connected to network.
main problem is when i am driving and the phone is switching network modes.
so I give 20.4801.30.0822U_3822.10.08.04 today another chance, try to flash if again.
but i am woried about stucking on HTC logo after flash :-( and brick it.
MyroLM said:
but i am woried about stucking on HTC logo after flash :-( and brick it.
Click to expand...
Click to collapse
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
I have the same or a very similar problem. I have the stock rom.
I already had 3 different desire s motherboard's and 2 different display's.
The first Desire S i had, with android 2.3.3, had a excellent signal. Due some problems i had, the phone bricked and had to go to HTC to repair.
HTC replaced the motherboard and update the version of the android to 2.3.5 and ever since the signal caption, the signal switch was working very bad.
The phone went to a second repair because of this, new phone, and again with android 2.3.5. The problems persisted.
I also tested with different SIM cards, from different mobile operators.
So, my conclusion is either android 2.3.5 or this new versions of Desire S have problems with signal caption and signal switch.
So as you, i need some help with this issue!
mouzzza said:
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
Click to expand...
Click to collapse
But when I reboot to recovery it will flash the radio again I think.
i hate stock roms, and dont like MIUI design That is why I am using Cyanogen
Anyway if I use 2G only switch, the phone is stable as rock both calls and data transfer.
EDIT: OK, flashed 20.4801.30.0822U_3822.10.08.04 sucessfully, signal OK, I will see what happens whet metwork mode switches
@Green Hawk:
give us more information about your device please, which radio you're using? Did they flash actual radion also?
@MyroLM:
report if the problem is still there or it's gone with flashing the rom
I am still testing new radio, but looks good Give me some days let you know...
Hi All,
I have a similar problem with the latest CM7.1 nightly builds (Reaper, jorgen2009). I never saw this with older CM7.1 versions, e.g. Nexx version, ICS, MIUI oder Endymion.
I have WLAN on and leave my house. Phone switches to 2G/3G..., so far so good. When I return home, The WLan sign in the status bar appears again, everything seems to be fine, but I have no connection. I get no data via WLan until I swicth WLan off and on again.
Radio is the latest from 2.10.401.5.
Best Regards
Wrapp
Had similar problems, upgrading to the latest radio helped. I got stuck on the HTC screen and I went through flashing RUU's and unlocking bootloaders back and forth... when the only thing that needs to be done is to wipe the cache.
Learned a lot about bootloaders though. But my warranty got void because i did the htcdev unlock... (Sorry for OT)
I searched around and couldn't find a definitive answer. The problem I'm having is connecting to wifi at all.
After getting a phone replacement, I unlocked the bootloader, flashed CWM recovery, rooted, flashed CM 10 nightly 09/29 and GApps but when I booted, I could not connect to wifi at all...I can't even turn on wifi because the toggle is greyed out. I have tried reflashing several times and even tried a different rom. but still no luck. Anyone else have this problem or know how I can fix it? I rely heavily on wifi because of ****ty data in my dorm. Any help would be much appreciated!
jaker.the.skater said:
I searched around and couldn't find a definitive answer. The problem I'm having is connecting to wifi at all.
After getting a phone replacement, I unlocked the bootloader, flashed CWM recovery, rooted, flashed CM 10 nightly 09/29 and GApps but when I booted, I could not connect to wifi at all...I can't even turn on wifi because the toggle is greyed out. I have tried reflashing several times and even tried a different rom. but still no luck. Anyone else have this problem or know how I can fix it? I rely heavily on wifi because of ****ty data in my dorm. Any help would be much appreciated!
Click to expand...
Click to collapse
Hello,
What was the version of software on you phone before rooting, was it a T-Mobile phone? The newest version for T-Mobile has created is issues for roms that aren't the same version.
Rsotbiemrptson
Sent from my Nexus 7 using xda premium
Yep, just found out that was the issue. kinda sucks because I'd rather have jelly bean! Oh well guess I'll deal with no wifi till a fix comes out.
why does the Ruu not work anymore i want to take my phone back to where the wifi works..... i have a cwm backup from before the update but that did not even fix the problem
____EDIT____
Well i got the wifi back. ( and the OTA update ? again )
Relocked the phone boot loader
I opened the RUU
took the Rom.zip from the folder.
took the stock recovery img
flashed the stock recovery img
start the phone back up
downloaded the update again. ( 4.0.4 )
did all the waiting etc
phone powers down reboots applies the updates to it self.
powers back up updating completed
WIFI WORKING.
go to try and do the ruu.exe again but no it says error 140( i think ) wrong bootloader version.
This update changes the bootloader to version 1.14___ So now the phone is non tamperd and says relocked so back to stock ( YAY )(((for now))))( i think lol )
Most importantly the Wifi is working.
If anyone wants i can take and give the files from the RUU ( not the whole zip but what ever img's you want from it ) Just send me a PM i will mail it to ya.
YousufWalton said:
why does the Ruu not work anymore i want to take my phone back to where the wifi works..... i have a cwm backup from before the update but that did not even fix the problem
____EDIT____
Well i got the wifi back. ( and the OTA update ? again )
Relocked the phone boot loader
I opened the RUU
took the Rom.zip from the folder.
took the stock recovery img
flashed the stock recovery img
start the phone back up
downloaded the update again. ( 4.0.4 )
did all the waiting etc
phone powers down reboots applies the updates to it self.
powers back up updating completed
WIFI WORKING.
go to try and do the ruu.exe again but no it says error 140( i think ) wrong bootloader version.
This update changes the bootloader to version 1.14___ So now the phone is non tamperd and says relocked so back to stock ( YAY )(((for now))))( i think lol )
Most importantly the Wifi is working.
If anyone wants i can take and give the files from the RUU ( not the whole zip but what ever img's you want from it ) Just send me a PM i will mail it to ya.
Click to expand...
Click to collapse
So did you use the 1.84 ruu? And you did this after applying the tmobile ota?
I would have posted this in the Sensation Android development area, but I don't have sufficient privileges to do so.
I no longer have WiFi.
I am using the 4.1.2 CM Kang, and I originally had WiFi working with that ROM, but it stopped working about a weeks ago, and I can't get it to come back.
If I watch the Wifi on/off toggle, I can see it blink white for a split second then return to grayed out about once every 5-10 seconds.
I've checked the WiFi settings, and the only thing that looks peculiar is that the region code under Advanced says "Europe," but when I try to change that, it just reverts.
I have tried a factory data reset,re-flash of the ROM, and installing newer versions of the ROM with no luck.
Does anyone have any suggestions?
tried this ?
WiFi will not turn on
ganeshp said:
tried this ?
Click to expand...
Click to collapse
I tried to install WiFix Manager, and I followed the directions closely, but WiFi still will not turn on.
The country code always reverts back to Europe in the Advanced WiFi Settings.
I'm on T-Mobile US, running AOKP aokp_pyramid_unofficial_Oct-19-12.zip; a JB ROM; 4.1.2
I previously tried the CM10 Kang for the HTC Sensation, but switched ROMs to make sure that it wasn't issue with the ROM.
To be clear, my problem is not that the WiFi radio never locks to a particular signal, it's that the WiFi radio won't even turn on.
When I go to WiFi settings it just says, "Turning on WiFi...," and never actually turns on.
My best guess was that it had something to do with the WiFi country code, but that's really just a stab in the dark; open to suggestions.
Thanks
bump
Surely, there's someone out there that can help?
kosstheory said:
Surely, there's someone out there that can help?
Click to expand...
Click to collapse
In order of easiest and quickest to longest time it will take to do each one...
Install the latest version of the ROM (10/23) overtop of your existing rom (5 minutes)
If that doesn't work...
Do a full wipe and install a fresh copy of the latest version. (15 minutes, with Nandroid backup)
If that doesn't work...
Format your SD card (save all the contents to your computer first) (40 minutes between copying every to the computer and back to the SD card)
NON ROM RELATED OPTION IF YOU ARE S-OFF
Reinstall your firmware as it's possible something got messed up. You will have to boot to recovery after this and wipe cache and dalvik or you will get bootloops. (5 minutes, but a little more involved)
My guess is that the full wipe and fresh install is the most likely to work the first time.
Skipjacks said:
Reinstall your firmware as it's possible something got messed up. You will have to boot to recovery after this and wipe cache and dalvik or you will get bootloops.
Click to expand...
Click to collapse
is there a sensation specific guide for this procedure?
Still perplexed
How do I know which kernel and radio combination should work best with my ROM. I switched out to AOKP to see if that was the problem, and I believe I'm using the 3.33 Kernel, but I don't know how to check to make sure it installed correctly.
Had the same problem as you but a full wipe and reflash would bring it back. Seems to be a CM10 problem since it happens with Bruce's and Paranoid roms. Try a Sense rom and see if wifi works.
Is OpenSense considered a "Sense ROM?"
http://forum.xda-developers.com/showthread.php?t=1926858
Try that rom, more stable and better performance than all the popular roms.
I had the same problem only option was another room Android_Revolution_HD-Sensation_6.8.0 (this is the rom)
so long, and thanks for all of the fish...
I figured it out.
I bought a Samsung Galaxy S III. WiFi is working again.
Thanks for all of the help!
wifi cm10
I have tried several CM10 roms. It is as you said about the region code. It reverts back to the original and doesnt save it on the settings
Even though editing db file doesn't work. Actually it changes the country code. I guess the ROM changes it during booting. Because while it boots you can see that the wifi is connecting first then goes off. I have tried several roms. DOnno what the problem is. probably JB both on cm10 and aokp
Please bare with me since this is the first time having to post for an issue since I usually find an answer on your forums
So here's the situation.
I bought the photon q 4g lte from ebay and it came with the unlocked bootloader.
Needless to say it was with the stock ics and i tried to find a jellybean update because it wasn't taking the ota and ended up going with cyanogen since i had no problems before. However those phones i had before were with sim cards not cdma.
I found out i couldn't update prl or profile manually without having to do something on the pc.
So after searching left and right i found i could use rsl lite (I used 6.1.5) and eventually found the "stock" file from this post
http://forum.xda-developers.com/showthread.php?t=2095536&highlight=rsd+lite
I did the stock jellybean, got it to go through the process and it booted up with no errors.
However, when it boots into the os it pops up a force close on omadmclient_sprint_dataservice and eventually also on the process com.android.phone.
I tried putting it in airplane mode to see if the service error would go away but it didn't work for the process part crashing.
I tried re-flashing, deleting cache in recovery, doing a data/factory reset in recovery and the one time i was able to do a data factory reset within the settings menu.
I could not find anyone that said they had a rom that worked with sprint and updating prl within the rom, if anyone knows of one let me know and i will flash it through rsd.
Otherwise does anyone have an idea of what could be happening because googling the omadmclient part did not pull up anything specific and pulling up the process issue for other phones has not helped me either.
Was this a hacked GSM phone, or are you using it as CDMA?
I've never heard of people having FC issues after flashing a FXZ from RSD. Which one did you flash? Android 4.1.2 - Sprint US - 9.8.2Q-122_XT897_FFW-5 (No simlock) ?
If you are on stock, you should be able to update the PRL within the ROM.
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
crispy6 said:
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
Click to expand...
Click to collapse
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
arrrghhh said:
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
Click to expand...
Click to collapse
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
crispy6 said:
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
Click to expand...
Click to collapse
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
arrrghhh said:
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
Click to expand...
Click to collapse
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
crispy6 said:
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
Click to expand...
Click to collapse
To downgrade to ICS, you need to remove some additional lines. See this post for more information on that.
However, you should be able to update the PRL on either stock ROM.
I think I said this before, but I will say it again. You need to do PRL updates, activate the phone, and get EVERYTHING working on stock BEFORE you flash ANY custom ROM. This is just standard practice - you don't want to put the cart before the horse! Get the phone working, then play with custom ROM's.
Hi there,
I have a problem with my HTC Sensation XE: Can't get the WiFi working.
When i hit the switch to put it ON, it stays on OFF and gives me "Turning on WiFi..." message forever.
- It is not a Radio / RIL problem since, i've tested many ROM's with many Radio / RIL's and it still doesn't work.
- It's not a Hardware problem since, sometimes, it works after various reboots or battery unplugs.
- When i write "getprop" in the terminal i get:
[wifi.interface]: [wlan0] | but if i write ifconfig wlan0 down the answer is SI0CGIFFLAGS no such device
[wifi.softap.interface]: [wlan0]
[wifi.softapconcurrent.interface]: [wl0.1]
[wifi.supplicant_scan_interval]: [15]
[wlan.driver.status]: [unloaded]
[wlan.sim.enabled]: [1]
I really don't know how to get it working again.
[Questions]
* What does the WiFi working / not working depends by? Kernel, Firmware, Radio, RIL, ROM ecc ?
* Is there any way to fix this?
Let me know fellas!
---------------- LOG ----------------
After unsing WiFix: http://forum.xda-developers.com/showthread.php?p=45909421#post45909421
-------------------------------------------------------------------------------------------------
Phone Specs:
ROM: Android Revolution HD 7.3 ( Android 4.0.3 )
Sense: 3.6
Kernel: SebastianFM 3.0.16-v1.5.2
Baseband: 11.76C.3504.00P_11.29A.3504.18_M
it depends from kernel mostly
try a diffrent kernel and see how it goes
you can use also the wifix manager app
I've tried a lot of kernels while changing ROMs but, the problem doesn't seem to get fixed ( actually i'm on a SebastianFM kernel ), however, after the WiFix got installed and activated through *#94349#, i've restarted the phone and the WiFi worked for 2 minutes ( in fact it scanned for wireless network, recognized them and almost connected ). After 2 mins, the WiFi stopped working again and, while trying to reactivate it, I saw that now I can't even deactivate it and i get the "Turning WiFi off..." message
Even tried to change the country code in the app from US to IT ( i'm in Italy ) but nothing happens...
At least i can confirm that it is not a hardwer problem.
MySelf_v1 said:
I've tried a lot of kernels while changing ROMs but, the problem doesn't seem to get fixed ( actually i'm on a SebastianFM kernel ), however, after the WiFix got installed and activated through *#94349#, i've restarted the phone and the WiFi worked for 2 minutes ( in fact it scanned for wireless network, recognized them and almost connected ). After 2 mins, the WiFi stopped working again and, while trying to reactivate it, I saw that now I can't even deactivate it and i get the "Turning WiFi off..." message
Even tried to change the country code in the app from US to IT ( i'm in Italy ) but nothing happens...
At least i can confirm that it is not a hardwer problem.
Click to expand...
Click to collapse
take out your back cover and lift up gently the pins which are responsible for the wifi
after that check your wifi
I had it too. But when I install revelation 1.0.2 rom and flash sebastian kernel it works good.
http://forum.xda-developers.com/showthread.php?t=2349756
@rzr86 already done that but nothing.
@1qasdfghj gonna try that too and i'm gonna report back asap. Thanks for caring about.
MySelf_v1 said:
@rzr86 already done that but nothing.
@1qasdfghj gonna try that too and i'm gonna report back asap. Thanks for caring about.
Click to expand...
Click to collapse
That works for you?
Hello, I have a problem which is almost similar to yours. I tested EVERYTHING, i mean everything i could find in this forum and in the internet. I knew that the Sensation has a problem with the Wi-Fi when i was buying it. (I bought it second hand - the seller told me that the problem with the wifi came after an official update to 4.0.4 Android). It was on low price so i starter looking for a solution to the problem. I found so many things and i said to myself that i will buy the phone, fix it using the forum (I really love u guys, on all my 4 Android phones i used ROM from here) and use the phone with no problem. So i bought the phone. Unlocked the bootloader, made it S-ON, installed 4ext recovery and starter trying everything to fix my problem. I will describe my problem now :
I Installed all versions of ICS, JB (4.1, 4.2 and 4.3), all the various kernels - the problem is that, when i turn the WI fi on i use the phone for 1-2-3 minutes (depends on the load and things i do on the phone) and after that it freezes and reboots. This is on everyrom ! Also while the wifi is turned on, if i want to lock the phone and turn-off the screen - the phone reboots again. I tried to use it without SIM card, tried WiFix Manager on all the ROMs and it didn't help. On ICS ROM WiFix manager helped me to get rid of that "Turning WI-fi on....." message and turns the wi-fi on, but the problem with the reboots persists. I asked the developers of the ROM, wrote in the SebastianKernel thread about that (they just didn't wanted to help me after i told them that flashing boot.img and WiFix doesn't work , I am with 4ext recovery with enabled "smart flash" - no problem with the boot.img) Now i am with MIUI ROM + Sebastian r31 with aroma installer kernel- also having the problem. Can anyone help ?
P.S : I took the phone to a service ( to exclude a hardware problem) and they confirmed that the phone has no hardware issue, the problem comes from the software. I attached a last_kmsg file from such kind of a reboot when the wi-fi is on and i try to turn off the screen.
P.S 2 : I Just installed GetRIL apps to get my RIL and the app says "Unknown RIL Found" ot shows my md5sum and the baseband but the RIL is not found ? What does this mean ?
actually try to return the device to stock by using a ruu.exe
http://forum.xda-developers.com/showthread.php?t=1672425
rzr86 said:
actually try to return the device to stock by using a ruu.exe
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
This process will start a long journey of going back S-OFF, installing recovery, Unlocking bootloader etc. and will consume a decent amount of time which i am not sure i have. Are u sure that going back to the far past RUU at any point will solve my problem ?
lionman011 said:
This process will start a long journey of going back S-OFF, installing recovery, Unlocking bootloader etc. and will consume a decent amount of time which i am not sure i have. Are u sure that going back to the far past RUU at any point will solve my problem ?
Click to expand...
Click to collapse
I don't think this will solve ur problem as I also had the same problem if WiFi and BT for 1 year and I was not able to solve it (story is long) I the tried every thing ruu etc nothing worked , but when I disassembled and reassembled my phone from local market it started to work and I was like o.0 only that fixed my fix problem and its working till now
Sent from my HTC Sensation using Tapatalk 4
lionman011 said:
This process will start a long journey of going back S-OFF, installing recovery, Unlocking bootloader etc. and will consume a decent amount of time which i am not sure i have. Are u sure that going back to the far past RUU at any point will solve my problem ?
Click to expand...
Click to collapse
actually if you are on S-OFF you will remain on S-OFF after ruu installation
so need for S-OFF again nor unlocking bootloader again
if you are on S-ON just use the unlock.code bin after ruu installation to unlock the bootloader
no need for extra steps