CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Your warranty is now void.
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you
.
Although many things work, there is still a lot of things we need to work out and fix.
After we get everything working, then I will no longer be maintaining this thread. I will turn it over to anyone who wants it. Since I have so many other projects going on.
This thread is specifically targeted in fixing the issues.
Please prune and post your logcats to pastebin.com.
Please include what you did to recreate the issue at hand.
If you figure out a fix, please update us with exactly what you did.
Instructions
- Read known issues ans FAQs
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Wipe /cache, /system, /data, /dalvik
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
source code for the t769
I will update source code weekly with upstream. I will update fixed issues as they occur.
Special thanks to:
ktempleton
j3r3
The donators (Please PM so I can add your xda user name instead of your real names...lol)
jparnell8839
Download Links and Changelog/issue tracker
Gapps
For radio issues check post #31 (thanks jparnell8839 )
For now, the date will determine the build/version number (look at the date which are the numbers before "UNOFFICIAL")
Mostly Official cm-10.1-20130922-UNOFFICIAL-t769.zip
Camera fixed
userdebug added to build type
RC cm-10.1-20130903-UNOFFICIAL-t769.zip
Changelog:
With WiFi now working, we can move to a release candidate
RC build
Fixed WiFi
Fixed intermittent gallery crash
Initial WIP build (Release candidate)
cm-10.1-20130729-UNOFFICIAL-t769.zip
Fixed intermittent audio void
Fixed sdcard mounts
Fixed usb/otg connection (must go to system settings/storage, tap menu key, select usb computer connection and change it to mass storage)
Bug tracker:
WiFi signal intermittently low
Camera still not working
GPS doesn't seem to get a lock (someone please test)
Testers, please update me. I still need feedback on bluetooth, video, etc...
I am tracking that radio, data, calls, mms/sms are all working fine.
FIRST
Edit: YES AHAHHAHA.
xWolf13 said:
FIRST
Edit: YES AHAHHAHA.
Click to expand...
Click to collapse
Really? lol... Like little kids in a candy store...lmbo!
thomas.raines said:
Really? lol... Like little kids in a candy store...lmbo!
Click to expand...
Click to collapse
Yup ahaha. Been refreshing this whole dev section once you posted "lets move to this to the dev section".
Thanks Thomas (':
http://goo.im/gapps/gapps-jb-20130301-signed.zip
Link for gapps 4.2.2
Sent from my GT-N7100 using xda app-developers app
lol great, now I need to download the new build and get fresh logcats!
as always, if you need a mirror, my server is open not the fastest, my ISP wont let me go any higher than 5mb/s, but it's stable
I'll download and start testing the build
Sent from my GT-N7100 using xda app-developers app
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
jparnell8839 said:
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
Click to expand...
Click to collapse
When you connect a device running Android 4.2.2 or higher to your computer, the system shows a dialog asking whether to accept an RSA key that allows debugging through your computer.. You confirm it and you can get the log.
jparnell8839 said:
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
Click to expand...
Click to collapse
Thanks for the offer on the mirror... I have 2 sites I use, one main and one just in case...lol... But you are welcome to upload it and post the link... I'll include it in the dl section.
As for your issues, I'm tracking the camera/gallery issue and of course wifi. as for data, have you tried using a different radio? Torch is working fine for me. Try downloading/flashing again. Might have gotten a bad flash/download (doubtful, but let's try it). Also, has the log changed or is about the same?
for the logcat to work change the type of usb connection to camera. It worked for me.
theprogram1 said:
for the logcat to work change the type of usb connection to camera. It worked for me.
Click to expand...
Click to collapse
Go to System settings/About phone and tap Build number several times until it tells you that you are a developer. Then you will have developer options and can now enable adb debugging...
Hey Thomas there is a fix for the camera crash on gerrit
http://review.cyanogenmod.org/#/c/46310/
Its for 4.3 but should work with 4.2 same logic
Sent from my SAMSUNG-SGH-I577 using xda premium
For those still getting device offline in adb. my n4 does this every time I switch between mine and my wife's. First make sure SDK is up to date. Secondly if it still does it. Tap the USB debugging option in developer options on and off again several times and the dialog box asking to accept the computer should come up. . Its not a for sure way to get it to work but this usually works for me.
Sent from my Nexus 4 using xda app-developers app
ktempleton said:
Hey Thomas there is a fix for the camera crash on gerrit
http://review.cyanogenmod.org/#/c/46310/
Its for 4.3 but should work with 4.2 same logic
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
The patch is already present... but I'm going to add it to the boardconfig.mk and see if it works...
I'm not sure if all of it was there but there were changes in the kernel and common folders as well as v media and display caf
They discuss them in detail here
http://forum.xda-developers.com/showthread.php?t=1798056
Sent from my SAMSUNG-SGH-I577 using xda premium
ktempleton said:
I'm not sure if all of it was there but there were changes in the kernel and common folders as well as v media and display caf
They discuss them in detail here
http://forum.xda-developers.com/showthread.php?t=1798056
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
I got it in there... let's see if it works... tomorrow... I've screwed the phone up anyways, so I'm stuck trying to fix that for now...lol
10.1 comes out as soon as i switch to the Nexus 4! Haha, well great job raines, and all else who contributed. Proud of you guys.
aronianchici said:
10.1 comes out as soon as i switch to the Nexus 4! Haha, well great job raines, and all else who contributed. Proud of you guys.
Click to expand...
Click to collapse
Switched to a nexus 4 a few months back from the blaze. You will love the development section for it(;
Sent from my Nexus 4 using xda app-developers app
Related
Hey everyone,
I started doing daily builds from the CM 7 source code just for myself but then people asked me to share them so I figured I would post them and share them with you crackflashers out there so you have something to flash as you wait for the official nightly
This is UNOFFICIAL and is NOT supported by CyanogenMod. DO NOT SUBMIT BUG REPORTS FOR THESE BUILDS TO CYANOGEN MOD.
This is kanged straight from the Cm 7 source. It has not been changed or modified in any way, just compiled. I will try to update the 2nd post everyday around 2 or 3pm EST with a fresh link
Same installation instructions that apply to the nightlies go for these builds as well so I'll quote the text from Chris Soyars' thread: http://forum.xda-developers.com/showthread.php?t=1058131
"Important!
It is strongly recommended that you flash clockwork recovery via NVFlash. If for some reason this or a future nightly build causes your phone to not boot up, you will not be able to boot into recovery unless you have it flashed via NVFlash.
NVFlash for Linux
NVFlash for Windows
To clear up some confusion, if you flashed your recovery via ROM Manager, you didn't actually flash a recovery. It is what we call a fakeflash, you should still probably flash with NVFlash.
Instructions
Download from http://download.cyanogenmod.com/?device=p999 and flash like you would any other ROM (via recovery or ROM Manager).
Be sure to backup before flashing, and of course a wipe is necessary when coming from stock.
Gapps are available from the usual places, however do not download the version that says it is for Tegra, even though this is a tegra device, as it will not flash.
Mod Edit:
Originally Posted by Mikey1022 View Post
Google Addon: http://goo-inside.me/google-apps/
Check the lastest package available on top
ChrisSoyars Edit:
After skimming some of the posts in this thread, here are some things that you can expect.
What to expect
- Everything working including Wifi, GPS, Audio, Camera, Front Facing Camera
- Screen off animation is not enabled, therefore it isn't broken.
- Occasional audio problems (as far as I know they have not been fixed). If audio does not play just reboot.
- Automagical brightness weridness, this is controlled by the kernel and not userspace, even having it working is very hacky."
Again this is NOT supported by cyanogen in ANY WAY. Flash at your own risk. I take no responsibility if you brick your device. ALWAYS BACK UP BEFORE FLASHING. I wont be fixing anything in these builds or changing anything, I'll leave that to the cyanogen crew to do So if you have issues or bugs no sense in reporting them as I'm sure they will be addressed in future official CM 7 builds
Build Date: 05/06/2011 repo synced and built at approx 3:00 AM EST:
upload got botched.. will re upload soon
dont wear yourself out now but daily work I hope you are a good coder
graffixnyc said:
Build Date: 5/04/2011 at approx 2:00 PM EST:
Download Link: http://www.megaupload.com/?d=ZEWGSEAA
Click to expand...
Click to collapse
Much appreciated!!!
can you or someone post mirrors? I can't seem to get the download to finish from mega
sooner0010 said:
can you or someone post mirrors? I can't seem to get the download to finish from mega
Click to expand...
Click to collapse
http://dl.dropbox.com/u/21064708/update-cm-7.1.0-RC0-G2x-KANG-signed.zip
graffixnyc said:
http://dl.dropbox.com/u/21064708/update-cm-7.1.0-RC0-G2x-KANG-signed.zip
Click to expand...
Click to collapse
Alot of ppl that are kanging g2x cm7 have the date and time as part of the file name, then when we put it on the sd card we don't get confused if we have multiple updates from diff ppl, in the same folder. just a friendly suggestion. and would help ppl out.
Oh and i did try this kang out it is getting better and better, but still some minor things that make it a non-daily driver for me, but they are small and will hopefully get resolved in the near future....but man I love CM7 on this phone!
pychobj2001 said:
Alot of ppl that are kanging g2x cm7 have the date and time as part of the file name, then when we put it on the sd card we don't get confused if we have multiple updates from diff ppl, in the same folder. just a friendly suggestion. and would help ppl out.
Oh and i did try this kang out it is getting better and better, but still some minor things that make it a non-daily driver for me, but they are small and will hopefully get resolved in the near future....but man I love CM7 on this phone!
Click to expand...
Click to collapse
ok, Will do for the next build with the date/time
I don't know if this was posted but you can see the commits that are part of each nightly.
http://cm-nightlies.appspot.com/?device=p999
Flashed it over nightly3, it booted Seems to be running fine, no problems encountered so far. Thanks!
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
sooner0010 said:
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
Click to expand...
Click to collapse
I just went out and got a new simcard and sdcard because of this and the connection is faster, as well as the apns only deleting a handfull of times. A battery pull always brings them back.
Sent from my LG-P999 using XDA App
Good luck.....
I should get 10 cents every time someone uses the word "crackflashers" ..... I regret not having trademarked it
Awesome!!!!
Am I the only person who can't get video chat for gtalk working? It works perfect on my MT4G running cm7 but it won't work on my g2x. it shows that I have video capabilities but I can't video chat. I've tried all the settings and 4 different gapps zips... help
sooner0010 said:
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
Click to expand...
Click to collapse
I always had that happen on all the CM7 versions I tried. I had to go in and select the network manually to AT&T and then after it failed to register on the network I selected Automatic. Then the APNs would come back and I could get online. I don't know why this works but restarting never fixed it for me, it only caused the APNs to go away.
nccu_eagles said:
Am I the only person who can't get video chat for gtalk working? It works perfect on my MT4G running cm7 but it won't work on my g2x. it shows that I have video capabilities but I can't video chat. I've tried all the settings and 4 different gapps zips... help
Click to expand...
Click to collapse
Only chat is working at the moment.
Now I have a question:
Is this the same as the one fitsnugly shares in his twitter? Or just the same compile made by two different people?
About the gtalk video, I have found a link in twitter for latest gapps that lets you do video in gtalk. *untested by me*
latest gapps can be downloaded here gapps-gb-20110503-signed.zip
sooner0010 said:
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
Click to expand...
Click to collapse
I had that issue. I did a full wipe. Fixed it.
Sent from my LG-P999 using XDA Premium App
wIIse said:
Is this the same as the one fitsnugly shares in his twitter? Or just the same compile made by two different people?
Click to expand...
Click to collapse
nope, not the same as mine. i also add unfinished/unmerged mods from gerrit for testing in my builds.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Samsung Mesmerize, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-Mesmerize
Download: link
Mirror: link
MD5sum: 36356d5b03d3713e55489cd0d263ef26
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
I flashed to the version listed above and had two major issues that required me to switch back to the stock USCC 2.3.4.
Could not send or receive text messages
GPS would not acquire signal
I really (REALLY) want to go back to CyanogenMod 7 - I was loving it! If I did not rely on my phone so much, I would have left it on until someone posted a fix.
Is this something that I am doing wrong or is it a bug?
Flash a fascinate modem.
Sent from my MIUI SCH-i500
sageDieu said:
Flash a fascinate modem.
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
Is there a guide on how to do that? Also, will that fix both the GPS and texting issues or just the texting issues?
Honestly flashing the EE19 modem should fix any SMS and MMS issues you're having. That's what has fixed it for others as well as myself.
This build wasn't buildt for the eh09 modem. That is supposed to be added shortley.
scarmon25 said:
Honestly flashing the EE19 modem should fix any SMS and MMS issues you're having. That's what has fixed it for others as well as myself.
This build wasn't buildt for the eh09 modem. That is supposed to be added shortley.
Click to expand...
Click to collapse
So is there a modem I can flash to that will get it working or do I have to wait? If there is a fix - can you provide me with a link to it please?
Thanks so much.
7earitup said:
So is there a modem I can flash to that will get it working or do I have to wait? If there is a fix - can you provide me with a link to it please?
Thanks so much.
Click to expand...
Click to collapse
Here is the EE19 modem. Unzip and flash the file in the PDA slot in Odin
http://db.tt/1YqerUvT
This is just the modem. It wont mess with any data on the phone like apps or things like that.
scarmon25 said:
Here is the EE19 modem. Unzip and flash the file in the PDA slot in Odin
This is just the modem. It wont mess with any data on the phone like apps or things like that.
Click to expand...
Click to collapse
Thanks. I am going to reflash it with C7 now.
---------- Post added at 06:39 PM ---------- Previous post was at 05:53 PM ----------
Whelp - that fixed the texting - thanks!
Now I cannot get the Google Apps pack to install. It succeeds when I install it through the Clockworkmod but none of the apps show up once the system loads.
I have tried reflashing and everything. It just makes no sense.
7earitup said:
Thanks. I am going to reflash it with C7 now.
---------- Post added at 06:39 PM ---------- Previous post was at 05:53 PM ----------
Whelp - that fixed the texting - thanks!
Now I cannot get the Google Apps pack to install. It succeeds when I install it through the Clockworkmod but none of the apps show up once the system loads.
I have tried reflashing and everything. It just makes no sense.
Click to expand...
Click to collapse
Try this gapps package
http://db.tt/mSU9a0MP
scarmon25 said:
Try this gapps package
Click to expand...
Click to collapse
Even though I had the latest package from the CyanogenMod web site, yours is the one that worked.
Thanks again! I think I am all set now.
I am back again - sorry!
I am having some issues with Wi-Fi. Every now and then, I will just stop receiving access to the Internet. The phone stays connected to my router, I just stop receiving any data. If I turn it off for a couple of minutes and then turn it back on, it usually comes back, but this is a hassle. It never happened on the stock ROM so it has to be a driver or something.
Any ideas?
Thanks again.
7earitup said:
I am back again - sorry!
I am having some issues with Wi-Fi. Every now and then, I will just stop receiving access to the Internet. The phone stays connected to my router, I just stop receiving any data. If I turn it off for a couple of minutes and then turn it back on, it usually comes back, but this is a hassle. It never happened on the stock ROM so it has to be a driver or something.
Any ideas?
Thanks again.
Click to expand...
Click to collapse
Go into settings - cm settings - interface- notification power widget- widget button and put a check in mobile data. That will put the mobile data toggle in the notification widget. When you have wifi on make sure to turn off mobile data. Then when you turn wifi off turn it back on. Wait a few seconds in between turning one off and the other on. Also while you are in interface there is alot of things you can adjust in there to make it look the way you want so check it out. If that doesn't work then there might be something else at play but that is normally the cause of it.
scarmon25 said:
Go into settings - cm settings - interface- notification power widget- widget button and put a check in mobile data. That will put the mobile data toggle in the notification widget. When you have wifi on make sure to turn off mobile data. Then when you turn wifi off turn it back on. Wait a few seconds in between turning one off and the other on. Also while you are in interface there is a lot of things you can adjust in there to make it look the way you want so check it out. If that doesn't work then there might be something else at play but that is normally the cause of it.
Click to expand...
Click to collapse
I will give that a shot. It is handy to have a way to turn off mobile data anyway.
Another small issue I have come across - maybe you have seen it as well. Whenever I answer calls, the in-call volume is at max and it literally blows me away when someone says something. I have to adjust it with the rocker to make it go down every time, even though I have the in-call volume adjusted lower in the settings.
Any tips for that one?
That's a known issue. I say it wilk be fixed at some point. The only thing I can tell ya is set it to where you want it and then when you answerbor make a call. Hit the volume rocker down once then back up once and it will put it back to where it was. Hopefully once Nightlies start rolling out we will see fixes for that.
scarmon25 said:
That's a known issue. I say it wilk be fixed at some point. The only thing I can tell ya is set it to where you want it and then when you answerbor make a call. Hit the volume rocker down once then back up once and it will put it back to where it was. Hopefully once Nightlies start rolling out we will see fixes for that.
Click to expand...
Click to collapse
Good to know I am not the only one having the issue then. Lol
Do you have any reception issues with Wi-Fi by chance? It seems like I lost a lot of range with this ROM.
I really can't say. I am never more than aabout ten feet away from where my router is and when I am I'm using mobile data. But with that said I haven't seen any signal loss.
Any idea why my GPS no longer works? I cannot receive a signal using Runkeeper. Kind of a bummer.
Sent from my SCH-I500 using XDA App
7earitup said:
Any idea why my GPS no longer works? I cannot receive a signal using Runkeeper. Kind of a bummer.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Not sure. I am actually getting a lock rather quickley. You nay try this. Navigate to System/etc and delete GPS.conf. tthen unzip the linked file and place both files back in system/etc and set permissions to rs,r,r in both files and reboot. You will need root explorer to do this.
http://db.tt/rtSBRVQD
scarmon25 said:
Not sure. I am actually getting a lock rather quickley. You nay try this. Navigate to System/etc and delete GPS.conf. tthen unzip the linked file and place both files back in system/etc and set permissions to rs,r,r in both files and reboot. You will need root explorer to do this.
http://db.tt/rtSBRVQD
Click to expand...
Click to collapse
Any free alternatives to Root Explorer?
Sent from my SCH-I500 using XDA App
There's one called file expert I believe but i don't know if it will allow you to set permissions. You can try it though. Can't hurt. Just check and see if you can before deleting anything.
This is a snapshot of my work on bringing camera support to Tezet's Milestone2 ICS port.
This is continuation of this thread: http://forum.xda-developers.com/showthread.php?t=1520572
- it's based on CM9 snapshot from March 2nd
- it may contain more (or less) bugs from Tezet's builds. It's simply different, newer etc.
- it should be possible to load this without factory reset on top of Tezet's CM9 builds and the other way around, though the last time I've tried this was early February...
- there's no need to wipe dalvik cache - the update script does this
- the fix for SIM lock pin is not included
- there's no Torch and file manager app. Don't ask
Camera notes:
The work is based on Atrix ICS camera support, with added overlay emulation.
What is working:
live preview
zooming
flash
focus
exposure compensation etc
taking photos
some 3rd party apps (Pano, CameraFX, Barcode scanner)
doesn't crash when enterinng video/panorama mode
generally much more stable
... probably not much more
What is not working:
panorama mode
video recording
a lot more
Other stuff: (compared to previous version)
- bluetooth should be OK (please test)
- aGPS should work
I highly recommend to do a nandroid backup before trying it.
Latest version available at http://code.google.com/p/cm9-milestone2/downloads/list
If your phone is stuck on Google logo, it means you have chosen a wrong version and you need to recover your phone from the SBF file.
Repository:
repo init -u git://github.com/rondoval/android.git -b ics
All the credits go to:
- Tezet, for the Milestone2 port
- tpruvot, Quarx2k, for their tremendous efforts on Defy support (and thus Milestone2)
- whole Atrix-Dev-Team, Raviprasad V Mummidi, zivan56 for their tremendous work on the camera driver
Just backing up my MS2 now. Going to flash it over CM7 Tezet and see how it goes.
Cheers for the efforts
omg thanks ! download...
Sent from my MotoA953 using xda premium
mattyt_491 said:
Just backing up my MS2 now. Going to flash it over CM7 Tezet and see how it goes.
Cheers for the efforts
Click to expand...
Click to collapse
its for CM9....
devilbatghost said:
its for CM9....
Click to expand...
Click to collapse
Actually this would be a good test... I did that in december. I had some issues, bu I think that was mainly due to wrong version of gapps.
If you're still planning to try upgrading from CM7 to CM9: You may need to wipe telephony provider data and deskclock after upgrade.
/data/data/com.android.deskclock/databases/alarms.db
/data/data/com.android.providers.telephony/databases/telephony.db
Please tell us how did it go
hi, rondoval.
chrome beta don't work. can you try to fix it when you have free time? thx.
rondoval said:
Actually this would be a good test... I did that in december. I had some issues, bu I think that was mainly due to wrong version of gapps.
If you're still planning to try upgrading from CM7 to CM9: You may need to wipe telephony provider data and deskclock after upgrade.
/data/data/com.android.deskclock/databases/alarms.db
/data/data/com.android.providers.telephony/databases/telephony.db
Please tell us how did it go
Click to expand...
Click to collapse
I know it is CM9 I said I was flashing (upgarding) FROM CM7.
As per your advice I cleared alarms.db and telephony.db and was going well.
I also was unable to find the fix for the SIM PIN lock, so I just disabled it.
I haven't yet tried the gapps for ICS because the download through multiupload.com is not working (seems as though multiupload in general is down).
I can confirm that the camera works (photos only) and was able to upgrade from CM7 with no issues without wiping my data.
The ROM is smooth and seems to handle most tasks I have thrown at it. However, I am finding 3D performance a bit lesser than that experienced on CM7 (not a major issue).
Cheers.
Good work, thx! Glad to see we have one more dev working on our MS2.
This rom is awesome!!! =D
Someone can upload the Gapps 4.0.3 please ? because the link on the other post is dead.
Thanks in advance
tony_the_unik said:
This rom is awesome!!! =D
Someone can upload the Gapps 4.0.3 please ? because the link on the other post is dead.
Thanks in advance
Click to expand...
Click to collapse
Here's the link to gapps http://goo.gl/krVg1
Thanks for the gapps link.
Out of interest is there a fix for the Sim pin code yet?
Sent from my MotoA953 using XDA
Some news:
First 5sec 480p video recorded.
Going to cinema now, so don't expect a build today.
New patch for 1% step battery counter on this build
rondoval said:
Some news:
First 5sec 480p video recorded.
Going to cinema now, so don't expect a build today.
Click to expand...
Click to collapse
thank you. I am glad to see the video recording fixed
Is there any bug for the touch?
Since when I am touching and holding on the screen, it displays I'm swiping horizontally instead of holding it (I enabled "Show touches" in Development Tools)
I believe i might have run into a bug, Im not sure if anyone has note this bug or not. In the apps menu, if you hold a application, you can drag it to Remove which will uninstall the app normally, however at the moment, dragging it to Remove does nothing. Does anyone have a idea whats wrong?
i have a huge problem. when my phone is booting up, it only shows the google logo, and.. nothing happend. only a black screen with backlights.
if i try the X factory reset, the screen with an exclamation mark pops up -
but if i press the @ key, nothing happen.
if i try to the connect my phone with RSD lite, the bootloader is loading but shows 'battery low
cannot program'
when i was trying to load the ROM my battery was ~50%...
what should i do?
after a few times failing with the @ - it works.. one time..pressed the factory reset - booted up - still bugged with the google boot up logo...
hi, aznsniper
i have the same problem,i have no idea to solve it. sorry... maybe rondoval will fix it in next build.
@jimbo0815
Did you factory wipe, cache wipe and dalvik wipe before installing the rom? If you did, is it possible that you installed the wrong version? Just my 2 cents worth.
aznsniper said:
I believe i might have run into a bug, Im not sure if anyone has note this bug or not. In the apps menu, if you hold a application, you can drag it to Remove which will uninstall the app normally, however at the moment, dragging it to Remove does nothing. Does anyone have a idea whats wrong?
Click to expand...
Click to collapse
ylqiu said:
hi, aznsniper
i have the same problem,i have no idea to solve it. sorry... maybe rondoval will fix it in next build.
Click to expand...
Click to collapse
that's a problem of trebuchet, the launcher. so it has to be fixed there.
but i think should be like that.
Sent from my MB525 using XDA App
Thomas.Raines and Team Fah-Q! presents
source code Lightning_Zap_Powered CM-10 Unoffical for SGH I577
https://github.com/TeamFahQ/msm8660-common_lz_kernel.git
https://github.com/TeamFahQ/msm8660-common_LZkernel_tools.git (scripts and zipalign binary)
A BIG THANK-YOU goes out to DR4ASTIC for the many months of work he put into porting cm-10 and our kernel so if you see him hit his thanks button, and if you have the means help get him some soap..lol Also thanks to Thomas Raines for bringing us LZ. the site will be under construction for a while as I have had a few requests for links to the various guides and tuts I've used to learn how to build...mind you it takes alot of time and research but to me its deffenitly worth it...Here is a thread for the blaze TFQ tweaks and install instructions for the LZ kernel. also features from this thread http://forum.xda-developers.com/showthread.php?t=1959657
Features:
Improved performance
Improved battery life
Improved network speeds
Improved boot times
Smoother scrolling
Better responsiveness
Cleaner file systems
Governor tweaks for amazing speed and performance without sacrificing battery life
Improved Memory and Ram tweaks
Improved Internet speed
Amazing kernel tweaks, build.prop mods, init.d scripts and more!
TUTS
[GUIDE] PARANOIDANDROID:JB
http://forum.xda-developers.com/showthread.php?t=1863547
Project Rookie How to build ROMS
http://forum.xda-developers.com/showthread.php?t=1798056
Guide how to compile and install CM10 for i9300
http://forum.xda-developers.com/showthread.php?t=1946481
TUT Building your first kernel
http://forum.xda-developers.com/showthread.php?t=1748297
Thanks to everyone who has helped this rookie put all this together
Dr4stic, thomas.raines, racing19969, and many others who i dont remember thanks everyone.
Warning: if you rooted your phone using the blaze recovery you need to use Odin and push our custom recovery tar file located below. make sure to uncheck repartion. if you push this with the blaze recovery it could cause issue's.
ok so d4astic cooked us up a CM 10 mod unofficial and our very own CMW recovery here are the links, and we need someone who can grab this and take over because d4astic doesnt have this phone and has a nightly on the blaze, so here you go everyone. I've taken over running the builds so....
,,,let the fun begin....
One more thing make sure you push the recovery first because the blaze one won't work with this rom
WARNING: if you brick your phone its not my fault i did this and it worked out fine just so you know
Also find this at this thread
http://forum.xda-developers.com/showthread.php?t=1730518
New Govs and U/V control brought to us by Thomas Raines and j3r3goss who dedicated his entire christmas break getting this to work for our phone. Also we know that at this time you cant control voltage with 3 rd party controls we are working on this so no need to tell us thanks
recovery cwm
cwm-6.0.1.4-exhilarate.tar - 6.92 MB
md5sum: f4f327659c35942ac8b5d08940b27efc
Cwm flash able zip
http://d-h.st/0KP
twrp 2.6
TWRP-2.6-Recovery-I577.zip - 7.67 MB
Official cm-10.2 thread
http://forum.xda-developers.com/showthread.php?p=45140599
official carbon rom by somcom
http://forum.xda-developers.com/showthread.php?t=2458690
official pacman by ink slinger
http://forum.xda-developers.com/showthread.php?t=2445143
4.3 is here hey guys so we skipped 4.2 and jumped right up to 4.3 due to efforts of many people
credits
j3r3goss
dr4stic
uberpeaguin
thomas raines
racing
somcom
teamchopsticks
meticulous(wifi-fix and several other things )
and of course yours truley
i know this list should be bigger and if you need to be on it because i missed you pm me and i will add you
i want to offer everyone on this list my heartfelt thanks from me and the rest of the i577 and blaze community without each and everyone of you we would still be stuck on 4.1 so thanks
4.3 moretz kernel source
thanks to these fine gentlemen
Team Chopsticks
CyanogenMod
Car vs Driver
elbermu
https://bitbucket.org/carvsdriver
moretz kernel oc to 1.5 ghz
flash from recovery and wipe caches
moretz_fixed_exhilarate.zip - 5.97 MB
4.3 roms
Liquid-JB-v3.0-UNOFFICIAL-exhilarate.zip - 115.52 MB
dirty unicorns all fixes included camera, torch, light sensor
du_exhilarate_2013-09-23.zip - 167.97 MB
beanstalk all fixes
BeanStalk-4.3.08-20130924-exhilarate.zip - 174.92 MB
pa_exhilarate-3.99-20130831.zip - 150.55 MB
i left out my slim build since meticulous has that under control there is a pac build in the thread by ink search for it its in the last 20 pages or so of the thread we are oficially supported by cm and team chopsticks and working on getting our own forum but xda seems to not be listening to me so all of you raise your voices and be heard by mods and anyone else who has a say in it i hope you enjoy my work this is the culmination of several months of time and energy and believe it or not i didnt even know what linux was when i started lol enjoy
old builds
4/25/13
SlimBean
Slim-3.1.0-i577-20130426-1514-UNOFFICIAL.zip - 80.51 MB
root box
5/6/13
fixed menu button and rom control
RootBox-JB-i577-Nightly-20130506.zip - 141.89 MB
http://d-h.st/3Nw
Remember with the LZ kernel if it hangs at boot let it sit for 10 minutes reboot and enjoy...
pacman LZ UPDATED 2/8/13
http://d-h.st/Afa
1/12/13
http://d-h.st/sjj
Paranoid Android: UPDATED 2/8/13
http://d-h.st/X5B
1/9/13
http://d-h.st/3AF
check this one out guys....
LiquidSmooth UPDATED 12/14/12
LZ:http://d-h.st/4z1
http://d-h.st/bqe. No LZ: NOT UPDATED
AOKP UPDATED revamped kernel
2/8/13
http://d-h.st/UEr
01/28/13
http://d-h.st/gg8
12/18/12
http://d-h.st/Wzb
rom and md5sum: cm10 sgh i577 exhilirate zip unofficial(Powered by LightningZap Kernel)
Cm10 updated 2/8/13
http://d-h.st/2Pd
UPDATED 1/9/13
http://d-h.st/4Hi
G-apps. JB
http://goo.im/gapps/gapps-jb-20121011-signed.zip
CM 9 stable unoficial build by dr4stic (At this time CM 9 does not have the lightning zap kernel)
so below is the folder where you will find the zip file for the cm9 build, make sure you get the md5 sum and compare it,please make sure you do a factory reset and wipe the dalvic cashe also, its under advance in the recovery
Now just in case you did not read from the top and just jumped down here; please push the recovery from the link above, if you do not do this you will have issues.
Thanks dr4stic for all your hard work, I'm going to post the ICS g-apps link . I hope everyone enjoys this as much as i do... With all that said .....enjoy....
CM9 unoficial rom with new kernel(updated by j3r3goss)
http://d-h.st/lNB
ICS G-APPS
http://db.tt/65fqUOcO
Ported ROMS
these roms were ported by InkSlinger420 they are not built from source but still very stable and a good expieriance
Credits
Avatar thanks for letting us post this here
the original thread can be found here
http://forum.xda-developers.com/showthread.php?t=2142130
Avatar Port
http://www.d-h.st/B4O
LiquidSmooth
Donation link for liquid smooth
http://bit.ly/Ruy2HF
thanks to Xwolf13 and the all star team for allowing us to port their work and post it for you guys the original thread can be found here
http://forum.xda-developers.com/showthread.php?t=2284763
Rom Port
http://d-h.st/RE5
i didnt do these ports guy so look up InkSlinger420 hit his thanks button and then go to the original thread and click the thanks button on the op post
this stuff takes alot of time and effort weather its a port or built from source so show them some love
thanks for posting it here... I will test it. Also you should post Gapps link. I have it.. but others might not and may flash the wrong Gapps.
This is NOT a rant...
These are some bugs I found so far.
1. Screen Orientation (Which OP mentioned)
2. While charging if you touch the power button It will black out and Hangs up (Pull battery and restart)
3. Camera sometimes having issues. (camera not found) but most of the time works perfect.
4. Call quality Low (Like all CM builds)
Rest everything seems to be very smooth. Google Now works without any issues.
I'm just writing this for information purpose only for those who like to use this build.
Thanks a lot to dr4stic for giving us this build.
Googler_1976 said:
These are some bugs I found so far.
1. Screen Orientation (Which OP mentioned)
2. While charging if you touch the power button It will black out and Hangs up (Pull battery and restart)
3. Camera sometimes having issues. (camera not found) but most of the time works perfect.
4. Call quality Low (Like all CM builds)
Rest everything seems to be very smooth. Google Now works without any issues.
I'm just writing this for information purpose only for those who like to use this build.
Thanks a lot to dr4stic for giving us this build.
Click to expand...
Click to collapse
Guys, turn off the notifications. The touchkey driver I used is the stock samsung one which doesn't have the BLN (button lights notifications) which CM is looking for. Whenever you get a message, or email, or really anything that would trigger a blinking LED, it's gonna crash the phone cuz the driver doesn't know how to handle it.
http://forum.xda-developers.com/showpost.php?p=32548093&postcount=108
dr4stic said:
Guys, turn off the notifications. The touchkey driver I used is the stock samsung one which doesn't have the BLN (button lights notifications) which CM is looking for. Whenever you get a message, or email, or really anything that would trigger a blinking LED, it's gonna crash the phone cuz the driver doesn't know how to handle it.
http://forum.xda-developers.com/showpost.php?p=32548093&postcount=108
Click to expand...
Click to collapse
BLN was never checked at-least on my phone. But its the screen rotation issue made me rollback to Stock ICS. I know you're very busy... but if you can guide me where to look into for that issue I will. Thanks again for ur hard work.
He needs a log cat run during the screen rotation and during start up so he can see what's going on. I don't know how to do this yet I've been looking into it but don't really know where to start. Do you know how to do this
Sent from my SAMSUNG-SGH-I577 using xda premium
Another thing that would be nice, the output of dmesg.
Just a brief explanation of what these things are. Logcat is basically the general android system logs as it boots up and runs. The dmesg is the log specifically of kernel messages as it boots up. This often includes details on drivers and potential errors there. ADB = android debug bridge, a way to connect to android, push and pull files, get a shell on the system, etc...
Install ADB drivers: If you've installed the drivers necessary to use Odin with your phone, it should include Samsung's ADB drivers for the phone. So I don't think you need to worry about that.
Install ADB: Not great, but not horrible ADB install tutorial
As for the phone itself, ADB is automatically enabled within recovery. When the phone is booted up as, you know... a phone... you'll want to go into Settings -> Developer Options, find "Android Debugging" and make sure it's turned on. That will enable ADB on android.
Now, some sample ADB commands to make your lives easier...
Check to make sure ADB sees your device (you should do this whenever you connect your phone to your computer, just to make sure you won't run into any errors with the commands below):
Code:
adb devices
Grab the output of dmesg (two versions, see it or redirect to a file.. you pick):
Code:
adb shell dmesg
or
adb shell dmesg > C:\name-of-some-text-file.txt
Grab the output of logcat (two versions, see it or redirect to a file.. you pick):
Code:
adb logcat
or
adb logcat > C:\name-of-some-text-file.txt
* NOTE: This will continue to grab output until either the system reboots or you hit CTRL+C on your keyboard. If you're just looking for the most recent messages, let it run for a few seconds and then CTRL+C it out.
Get a Linux shell on the system:
Code:
adb shell
Restart local ADB server (sometimes necessary... if you KNOW your phone is connected and ADB stopped recognizing it):
Code:
adb kill-server
Thanks guys!
I began setting a dB up on my comp last night I have java installed and started on the SDK but I fell asleep will work on it some more today. Now I'm going to read the links you posted and see if my research went in the right direction. One thing I will tell you is I've been spoiled by windows. Setting this up has given me flashbacks to the days of DOS. Lol
Thanks for the info and the time to point us in the right direction.
Sent from my SAMSUNG-SGH-I577 using xda premium
ktempleton said:
I began setting a dB up on my comp last night I have java installed and started on the SDK but I fell asleep will work on it some more today. Now I'm going to read the links you posted and see if my research went in the right direction. One thing I will tell you is I've been spoiled by windows. Setting this up has given me flashbacks to the days of DOS. Lol
Thanks for the info and the time to point us in the right direction.
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
Another easy way is install Droid Explorer (http://de.codeplex.com/) Power off phone when connected. then click on the logcat console button. It will open the command window and lines keep scrolling... Don't do anything till it completely boots. then Save the file (option on cmd window).
But i think the rotation issue is in the kernel so we might have to use the cmd line provided for that. U can use it in the same app.
Currently I'm back on ICS... So once I can't do it now. Today when I get some time I will re-install and run this.
Googler_1976 said:
But i think the rotation issue is in the kernel so we might have to use the cmd line provided for that. U can use it in the same app.
Click to expand...
Click to collapse
It probably is in the kernel. That's why I want the output of dmesg as well.
Incidently, it seems my initial kernel patch is winning some reviews and with any luck, I'll have it in the official cm kernel fairly soon now.
I did a search in the play Store for Log Cat, there are numerous apps in there for saving, sharing logcats, will these do the job? I certainly seems it would be much easier than ADB. Just curious.
dr4stic said:
It probably is in the kernel. That's why I want the output of dmesg as well.
Incidently, it seems my initial kernel patch is winning some reviews and with any luck, I'll have it in the official cm kernel fairly soon now.
Click to expand...
Click to collapse
So Is it basically same kernel for ur device and I577? if it is.. That's really cool.
---------- Post added at 07:42 PM ---------- Previous post was at 07:40 PM ----------
pegb856 said:
I did a search in the play Store for Log Cat, there are numerous apps in there for saving, sharing logcats, will these do the job? I certainly seems it would be much easier than ADB. Just curious.
Click to expand...
Click to collapse
I think most of them cant run booting up... ("I think is the keyword")
Googler_1976 said:
So Is it basically same kernel for ur device and I577? if it is.. That's really cool.
---------- Post added at 07:42 PM ---------- Previous post was at 07:40 PM ----------
I think most of them cant run booting up... ("I think is the keyword")
Click to expand...
Click to collapse
*I think* that makes sense and you are probably right.
dr4stic said:
Guys, turn off the notifications. The touchkey driver I used is the stock samsung one which doesn't have the BLN (button lights notifications) which CM is looking for. Whenever you get a message, or email, or really anything that would trigger a blinking LED, it's gonna crash the phone cuz the driver doesn't know how to handle it.
http://forum.xda-developers.com/showpost.php?p=32548093&postcount=108
Click to expand...
Click to collapse
Here is the Logcat... and Kernel Log
Well I'm all in. I was cleaning things up before loading everything up and accidentally deleted all my backups . Oh well, so far I'm loving this. Hope it's good to go for a daily or I'll be setting up a new ICS install too.
I could always upload one of my ICS backups to drop box for you if it comes down to that
Sent from my SAMSUNG-SGH-I577 using xda premium
ktempleton said:
I could always upload one of my ICS backups to drop box for you if it comes down to that
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
Not a big deal. So far not having any issues other than rotate bug. Even notifications are working ok. I did turn off some notification light setting and I thought I saw something about softkey flash notification, but I couldn't find it again. Take me a bit to get used to the menu structure.
Everything is pretty smooth as of right now.
Unfortunately my phone randomly shut down twice today and I ended up going back to ICS for now. The first time I had foursquare open but had laid it down since the light changed and when I picked it up it was off, the second time it was just laying on the desk and when I picked it up it was off again. I did back it up before restoring ICS though. I've got a lot going on the next couple days and need a dependable device.
I might restore back to CM 10 and tinker with it when I'm not expecting phone calls.
pegb856 said:
Unfortunately my phone randomly shut down twice today and I ended up going back to ICS for now. The first time I had foursquare open but had laid it down since the light changed and when I picked it up it was off, the second time it was just laying on the desk and when I picked it up it was off again. I did back it up before restoring ICS though. I've got a lot going on the next couple days and need a dependable device.
I might restore back to CM 10 and tinker with it when I'm not expecting phone calls.
Click to expand...
Click to collapse
Same here after i provided the logs. The phone was lying and when i checked it was shutdown.
.
We were having similar problems on the blaze end. Most of them seem to be getting worked out pretty quickly so I'm fairly confident you guys should be seeing some problems fixed soon too.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of Android JellyBean 4.2 from AOSP source code based on the CyaogenMod device tree for Acer A700. I have made this build to gauge how difficult it would be to port JellyBean 4.2 to current devices.
Kernel Source Code: https://github.com/pawitp/android_kernel_acer_t30/tree/jellybean-next
Device Tree: None yet available (Only notable part: patch for TinyHAL: https://gist.github.com/4104332)
Downloads
ROM: http://goo.im/devs/pawitp/a700/a700_aosp_jb42_20121116.zip
Google Apps: Currently integrated due to lack of gapps package for 4.2
SuperSU: http://download.chainfire.eu/282/SuperSU/CWM-SuperSU-v0.98.zip (Currently, only SuperSU is compatible with 4.2)
Installation
Note: due to new /data/media layout in 4.2 for multiple user support, your data in /data/media (/sdcard) will be moved to /data/media/0. This may cause problems in restoring backups in recovery, you may fix it by moving data /data/media/0 back to /data/media via adb in recover prior to restoring data.
Install CWM recovery from http://forum.xda-developers.com/showthread.php?t=1791165
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Wipe data if coming from stock
Known Issues
Camera does not work
Bluetooth sometimes freezes bringing down Wi-Fi with it
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. The development of this preview will also cease once enough progress has been made in CyanogenMod.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
gonna grab this later
Wow! This ROM is awesome. Please make it more stable. And the Performance is not so good as other ROMs.
Webitu
Webitu said:
Wow! This ROM is awesome. Please make it more stable. And the Performance is not so good as other ROMs.
Webitu
Click to expand...
Click to collapse
For stability: Please report crashes as mentioned in the OP, without logs, there'd be no way to know what broke.
For performance: Please report where and how performance differs.
Note that generic "please make this better" report do not help, please be more specific.
Runs so far, unfortunately I can not get a wifi connection. 'm Back to 4.1 back.
Fooox1 said:
Runs so far, unfortunately I can not get a wifi connection. 'm Back to 4.1 back.
Click to expand...
Click to collapse
Next time, please get a logcat.
pawitp said:
For stability: Please report crashes as mentioned in the OP, without logs, there'd be no way to know what broke.
For performance: Please report where and how performance differs.
Note that generic "please make this better" report do not help, please be more specific.
Click to expand...
Click to collapse
Okay sorry. The launcher laggs sometimes and the Antutu benchmark results are not really good.
The GPU test results are 967 points. (3D = 674, 2D = 293)
The fps are 31. In the stock ROM i had 42 fps i think.
And i havn´t any crashes but it seems like its a little bit unstable but it can be also the apps who are not official for 4.2
But very good work! :good:
Sorry for my bad English.
Webitu
The graphic issue can't really be helped, Android 4.2 requires new graphic drivers and the current binaries used are optimized for the Nexus 7. As there are closed-source binaries, there is no way to modify them. The situation may change in the future as compatibility layers are introduced or new drivers are released.
pawitp said:
The graphic issue can't really be helped, Android 4.2 requires new graphic drivers and the current binaries used are optimized for the Nexus 7. As there are closed-source binaries, there is no way to modify them. The situation may change in the future as compatibility layers are introduced or new drivers are released.
Click to expand...
Click to collapse
Okay thank you. I already thought so. Hopely Acer brings a new Update with 4.2
Webitu
Nvidia is the same xxx as samsung (
Is A701 supported?
It will work on A701, but 3G will not work.
BTW, CM10.1 preview. Nearly everything working (including Camera, etc.). Nightlies should start soon and I'll make a new thread then.
http://goo.im/devs/pawitp/a700/cm-10.1-20121216-UNOFFICIAL-a700.zip
pawitp said:
It will work on A701, but 3G will not work.
BTW, CM10.1 preview. Nearly everything working (including Camera, etc.). Nightlies should start soon and I'll make a new thread then.
http://goo.im/devs/pawitp/a700/cm-10.1-20121216-UNOFFICIAL-a700.zip
Click to expand...
Click to collapse
Yeah. Big thanks for your work! I will try it out now. Did you recognized that when you set a wallpaper on CM10 only half of the wallpaper is used on the homescreen? Don`t know how to log this issue.
OCmylife said:
Yeah. Big thanks for your work! I will try it out now. Did you recognized that when you set a wallpaper on CM10 only half of the wallpaper is used on the homescreen? Don`t know how to log this issue.
Click to expand...
Click to collapse
It's due to our screen size and peculiar wallpaper handling, so the default wallpapers don't scale too well.
pawitp said:
It's due to our screen size and peculiar wallpaper handling, so the default wallpapers don't scale too well.
Click to expand...
Click to collapse
Yeah I`ve tried logcat in the terminal, before I read your command. It shows no error-message when I changed the wallpaper. But I think I could live with this one.
I`ve encountered one minor Issue. You could change the default page size in the trebutchet settings, but it doesn`t take effect on your pages on the homescreen. Yeah really minor issue, but otherwise I haven`t found a bug so far. But I will search further.
Again. CM 10.1 looks absolutely awesome on the Acer A700 and I would recommend everybody who has CWM on his A700 to try this one out. :highfive:
Has anyone tried twrp recovery on the A700? I`m frightened every time to flash on my A700, cause I experienced the freeze issue also(one time so far, after I switched from CM10 to Iconian 2.2).
Trying to install CM10.1 but until now only bootscreen for 20 mins :/
Edit: hmm almost 40 minutes -.-
Tried Wiping Data/System/Cache now, but still Bootscreen loading and loading..
Chris0706 said:
Trying to install CM10.1 but until now only bootscreen for 20 mins :/
Edit: hmm almost 40 minutes -.-
Tried Wiping Data/System/Cache now, but still Bootscreen loading and loading..
Click to expand...
Click to collapse
Use adb to get a logcat, it'll tell you what's wrong. Normally, it's caused by not wiping data when coming from a stock ROM, but since you've said that you've wiped data, maybe there's some other cause.
pawitp said:
Use adb to get a logcat, it'll tell you what's wrong. Normally, it's caused by not wiping data when coming from a stock ROM, but since you've said that you've wiped data, maybe there's some other cause.
Click to expand...
Click to collapse
Which command parameters should i use ? Its a load of text.
If i want to save the log in a file with the -f parameter i always get the error, that the output file couldnt be openend and that my filesystem is read-only ..
Chris0706 said:
Which command parameters should i use ? Its a load of text.
If i want to save the log in a file with the -f parameter i always get the error, that the output file couldnt be openend and that my filesystem is read-only ..
Click to expand...
Click to collapse
adb logcat > log.txt
Sent from my GT-I9000 using xda app-developers app
So now i got the logcat attached, hopefully you find the error..