CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Samsung Mesmerize, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-Mesmerize
Download: link
Mirror: link
MD5sum: 36356d5b03d3713e55489cd0d263ef26
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
I flashed to the version listed above and had two major issues that required me to switch back to the stock USCC 2.3.4.
Could not send or receive text messages
GPS would not acquire signal
I really (REALLY) want to go back to CyanogenMod 7 - I was loving it! If I did not rely on my phone so much, I would have left it on until someone posted a fix.
Is this something that I am doing wrong or is it a bug?
Flash a fascinate modem.
Sent from my MIUI SCH-i500
sageDieu said:
Flash a fascinate modem.
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
Is there a guide on how to do that? Also, will that fix both the GPS and texting issues or just the texting issues?
Honestly flashing the EE19 modem should fix any SMS and MMS issues you're having. That's what has fixed it for others as well as myself.
This build wasn't buildt for the eh09 modem. That is supposed to be added shortley.
scarmon25 said:
Honestly flashing the EE19 modem should fix any SMS and MMS issues you're having. That's what has fixed it for others as well as myself.
This build wasn't buildt for the eh09 modem. That is supposed to be added shortley.
Click to expand...
Click to collapse
So is there a modem I can flash to that will get it working or do I have to wait? If there is a fix - can you provide me with a link to it please?
Thanks so much.
7earitup said:
So is there a modem I can flash to that will get it working or do I have to wait? If there is a fix - can you provide me with a link to it please?
Thanks so much.
Click to expand...
Click to collapse
Here is the EE19 modem. Unzip and flash the file in the PDA slot in Odin
http://db.tt/1YqerUvT
This is just the modem. It wont mess with any data on the phone like apps or things like that.
scarmon25 said:
Here is the EE19 modem. Unzip and flash the file in the PDA slot in Odin
This is just the modem. It wont mess with any data on the phone like apps or things like that.
Click to expand...
Click to collapse
Thanks. I am going to reflash it with C7 now.
---------- Post added at 06:39 PM ---------- Previous post was at 05:53 PM ----------
Whelp - that fixed the texting - thanks!
Now I cannot get the Google Apps pack to install. It succeeds when I install it through the Clockworkmod but none of the apps show up once the system loads.
I have tried reflashing and everything. It just makes no sense.
7earitup said:
Thanks. I am going to reflash it with C7 now.
---------- Post added at 06:39 PM ---------- Previous post was at 05:53 PM ----------
Whelp - that fixed the texting - thanks!
Now I cannot get the Google Apps pack to install. It succeeds when I install it through the Clockworkmod but none of the apps show up once the system loads.
I have tried reflashing and everything. It just makes no sense.
Click to expand...
Click to collapse
Try this gapps package
http://db.tt/mSU9a0MP
scarmon25 said:
Try this gapps package
Click to expand...
Click to collapse
Even though I had the latest package from the CyanogenMod web site, yours is the one that worked.
Thanks again! I think I am all set now.
I am back again - sorry!
I am having some issues with Wi-Fi. Every now and then, I will just stop receiving access to the Internet. The phone stays connected to my router, I just stop receiving any data. If I turn it off for a couple of minutes and then turn it back on, it usually comes back, but this is a hassle. It never happened on the stock ROM so it has to be a driver or something.
Any ideas?
Thanks again.
7earitup said:
I am back again - sorry!
I am having some issues with Wi-Fi. Every now and then, I will just stop receiving access to the Internet. The phone stays connected to my router, I just stop receiving any data. If I turn it off for a couple of minutes and then turn it back on, it usually comes back, but this is a hassle. It never happened on the stock ROM so it has to be a driver or something.
Any ideas?
Thanks again.
Click to expand...
Click to collapse
Go into settings - cm settings - interface- notification power widget- widget button and put a check in mobile data. That will put the mobile data toggle in the notification widget. When you have wifi on make sure to turn off mobile data. Then when you turn wifi off turn it back on. Wait a few seconds in between turning one off and the other on. Also while you are in interface there is alot of things you can adjust in there to make it look the way you want so check it out. If that doesn't work then there might be something else at play but that is normally the cause of it.
scarmon25 said:
Go into settings - cm settings - interface- notification power widget- widget button and put a check in mobile data. That will put the mobile data toggle in the notification widget. When you have wifi on make sure to turn off mobile data. Then when you turn wifi off turn it back on. Wait a few seconds in between turning one off and the other on. Also while you are in interface there is a lot of things you can adjust in there to make it look the way you want so check it out. If that doesn't work then there might be something else at play but that is normally the cause of it.
Click to expand...
Click to collapse
I will give that a shot. It is handy to have a way to turn off mobile data anyway.
Another small issue I have come across - maybe you have seen it as well. Whenever I answer calls, the in-call volume is at max and it literally blows me away when someone says something. I have to adjust it with the rocker to make it go down every time, even though I have the in-call volume adjusted lower in the settings.
Any tips for that one?
That's a known issue. I say it wilk be fixed at some point. The only thing I can tell ya is set it to where you want it and then when you answerbor make a call. Hit the volume rocker down once then back up once and it will put it back to where it was. Hopefully once Nightlies start rolling out we will see fixes for that.
scarmon25 said:
That's a known issue. I say it wilk be fixed at some point. The only thing I can tell ya is set it to where you want it and then when you answerbor make a call. Hit the volume rocker down once then back up once and it will put it back to where it was. Hopefully once Nightlies start rolling out we will see fixes for that.
Click to expand...
Click to collapse
Good to know I am not the only one having the issue then. Lol
Do you have any reception issues with Wi-Fi by chance? It seems like I lost a lot of range with this ROM.
I really can't say. I am never more than aabout ten feet away from where my router is and when I am I'm using mobile data. But with that said I haven't seen any signal loss.
Any idea why my GPS no longer works? I cannot receive a signal using Runkeeper. Kind of a bummer.
Sent from my SCH-I500 using XDA App
7earitup said:
Any idea why my GPS no longer works? I cannot receive a signal using Runkeeper. Kind of a bummer.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Not sure. I am actually getting a lock rather quickley. You nay try this. Navigate to System/etc and delete GPS.conf. tthen unzip the linked file and place both files back in system/etc and set permissions to rs,r,r in both files and reboot. You will need root explorer to do this.
http://db.tt/rtSBRVQD
scarmon25 said:
Not sure. I am actually getting a lock rather quickley. You nay try this. Navigate to System/etc and delete GPS.conf. tthen unzip the linked file and place both files back in system/etc and set permissions to rs,r,r in both files and reboot. You will need root explorer to do this.
http://db.tt/rtSBRVQD
Click to expand...
Click to collapse
Any free alternatives to Root Explorer?
Sent from my SCH-I500 using XDA App
There's one called file expert I believe but i don't know if it will allow you to set permissions. You can try it though. Can't hurt. Just check and see if you can before deleting anything.
Related
Hey everyone,
I started doing daily builds from the CM 7 source code just for myself but then people asked me to share them so I figured I would post them and share them with you crackflashers out there so you have something to flash as you wait for the official nightly
This is UNOFFICIAL and is NOT supported by CyanogenMod. DO NOT SUBMIT BUG REPORTS FOR THESE BUILDS TO CYANOGEN MOD.
This is kanged straight from the Cm 7 source. It has not been changed or modified in any way, just compiled. I will try to update the 2nd post everyday around 2 or 3pm EST with a fresh link
Same installation instructions that apply to the nightlies go for these builds as well so I'll quote the text from Chris Soyars' thread: http://forum.xda-developers.com/showthread.php?t=1058131
"Important!
It is strongly recommended that you flash clockwork recovery via NVFlash. If for some reason this or a future nightly build causes your phone to not boot up, you will not be able to boot into recovery unless you have it flashed via NVFlash.
NVFlash for Linux
NVFlash for Windows
To clear up some confusion, if you flashed your recovery via ROM Manager, you didn't actually flash a recovery. It is what we call a fakeflash, you should still probably flash with NVFlash.
Instructions
Download from http://download.cyanogenmod.com/?device=p999 and flash like you would any other ROM (via recovery or ROM Manager).
Be sure to backup before flashing, and of course a wipe is necessary when coming from stock.
Gapps are available from the usual places, however do not download the version that says it is for Tegra, even though this is a tegra device, as it will not flash.
Mod Edit:
Originally Posted by Mikey1022 View Post
Google Addon: http://goo-inside.me/google-apps/
Check the lastest package available on top
ChrisSoyars Edit:
After skimming some of the posts in this thread, here are some things that you can expect.
What to expect
- Everything working including Wifi, GPS, Audio, Camera, Front Facing Camera
- Screen off animation is not enabled, therefore it isn't broken.
- Occasional audio problems (as far as I know they have not been fixed). If audio does not play just reboot.
- Automagical brightness weridness, this is controlled by the kernel and not userspace, even having it working is very hacky."
Again this is NOT supported by cyanogen in ANY WAY. Flash at your own risk. I take no responsibility if you brick your device. ALWAYS BACK UP BEFORE FLASHING. I wont be fixing anything in these builds or changing anything, I'll leave that to the cyanogen crew to do So if you have issues or bugs no sense in reporting them as I'm sure they will be addressed in future official CM 7 builds
Build Date: 05/06/2011 repo synced and built at approx 3:00 AM EST:
upload got botched.. will re upload soon
dont wear yourself out now but daily work I hope you are a good coder
graffixnyc said:
Build Date: 5/04/2011 at approx 2:00 PM EST:
Download Link: http://www.megaupload.com/?d=ZEWGSEAA
Click to expand...
Click to collapse
Much appreciated!!!
can you or someone post mirrors? I can't seem to get the download to finish from mega
sooner0010 said:
can you or someone post mirrors? I can't seem to get the download to finish from mega
Click to expand...
Click to collapse
http://dl.dropbox.com/u/21064708/update-cm-7.1.0-RC0-G2x-KANG-signed.zip
graffixnyc said:
http://dl.dropbox.com/u/21064708/update-cm-7.1.0-RC0-G2x-KANG-signed.zip
Click to expand...
Click to collapse
Alot of ppl that are kanging g2x cm7 have the date and time as part of the file name, then when we put it on the sd card we don't get confused if we have multiple updates from diff ppl, in the same folder. just a friendly suggestion. and would help ppl out.
Oh and i did try this kang out it is getting better and better, but still some minor things that make it a non-daily driver for me, but they are small and will hopefully get resolved in the near future....but man I love CM7 on this phone!
pychobj2001 said:
Alot of ppl that are kanging g2x cm7 have the date and time as part of the file name, then when we put it on the sd card we don't get confused if we have multiple updates from diff ppl, in the same folder. just a friendly suggestion. and would help ppl out.
Oh and i did try this kang out it is getting better and better, but still some minor things that make it a non-daily driver for me, but they are small and will hopefully get resolved in the near future....but man I love CM7 on this phone!
Click to expand...
Click to collapse
ok, Will do for the next build with the date/time
I don't know if this was posted but you can see the commits that are part of each nightly.
http://cm-nightlies.appspot.com/?device=p999
Flashed it over nightly3, it booted Seems to be running fine, no problems encountered so far. Thanks!
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
sooner0010 said:
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
Click to expand...
Click to collapse
I just went out and got a new simcard and sdcard because of this and the connection is faster, as well as the apns only deleting a handfull of times. A battery pull always brings them back.
Sent from my LG-P999 using XDA App
Good luck.....
I should get 10 cents every time someone uses the word "crackflashers" ..... I regret not having trademarked it
Awesome!!!!
Am I the only person who can't get video chat for gtalk working? It works perfect on my MT4G running cm7 but it won't work on my g2x. it shows that I have video capabilities but I can't video chat. I've tried all the settings and 4 different gapps zips... help
sooner0010 said:
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
Click to expand...
Click to collapse
I always had that happen on all the CM7 versions I tried. I had to go in and select the network manually to AT&T and then after it failed to register on the network I selected Automatic. Then the APNs would come back and I could get online. I don't know why this works but restarting never fixed it for me, it only caused the APNs to go away.
nccu_eagles said:
Am I the only person who can't get video chat for gtalk working? It works perfect on my MT4G running cm7 but it won't work on my g2x. it shows that I have video capabilities but I can't video chat. I've tried all the settings and 4 different gapps zips... help
Click to expand...
Click to collapse
Only chat is working at the moment.
Now I have a question:
Is this the same as the one fitsnugly shares in his twitter? Or just the same compile made by two different people?
About the gtalk video, I have found a link in twitter for latest gapps that lets you do video in gtalk. *untested by me*
latest gapps can be downloaded here gapps-gb-20110503-signed.zip
sooner0010 said:
well, I seem to be having the same problems I had with the nightlys. The apns delete themselves therefore removing my data connection. I have tried rebooting several times etc. I re-add the apn settings and they won't save. I can only connect to data with wifi. Idk what the deal is.
Click to expand...
Click to collapse
I had that issue. I did a full wipe. Fixed it.
Sent from my LG-P999 using XDA Premium App
wIIse said:
Is this the same as the one fitsnugly shares in his twitter? Or just the same compile made by two different people?
Click to expand...
Click to collapse
nope, not the same as mine. i also add unfinished/unmerged mods from gerrit for testing in my builds.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Aria, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-Liberty
Download: link
Mirror: link
MD5sum: 006197debecd916dc8ce3feadea1e74a
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
hey, just want to say… GREAT JOB GUYS. YES, THANK YOU SO MUCH FOR THIS AWESOME ROM!!!
Looking good so far. Will post if I run into any issues. Glad I can finally have a stable build and not need to flash for a little while!
Thanks for all the effort.
Having issues with data. It worked fine for a while on the first boot but once I rebooted the phone, I can't get the phone to connect on data. Anyone having this issue, and most importantly how do I resolve it?
Other than that, amazing. Thanks for this great rom.
Edit: I looked into the access point name under the mobile network section and noticed a bunch of info was wrong. Notably the password was missing. I added the password and rebooted the phone and now everything is working fine. FYI the password is CINGULAR1.
android market wont let me download aanything!!! Please help!
_jfo_ said:
Having issues with data. It worked fine for a while on the first boot but once I rebooted the phone, I can't get the phone to connect on data. Anyone having this issue, and most importantly how do I resolve it?
Other than that, amazing. Thanks for this great rom.
Click to expand...
Click to collapse
No issues here.
supetawesomedude said:
android market wont let me download aanything!!! Please help!
Click to expand...
Click to collapse
Again, not any issues here.
supetawesomedude said:
android market wont let me download aanything!!! Please help!
Click to expand...
Click to collapse
clear data and reboot?
Installed over an old nightly fine, no problems whatsoever after a full day of use.
Nice work guys.
brswattt said:
clear data and reboot?
Click to expand...
Click to collapse
What the heck? It's workking first fine now!
thnxz. looking good
Hmm...i wanted to try using this "juwe" script but it won't boot...i'm assuming some sort of conflict with darktremor. I also wanted to go to S2E but the last time i tried to go from DT to S2E, everything went haywire and i had to restore an old back up because i rookishly forgot to make one before i started fuxing with S2E...hmph guess i'm stuck with 8-9-1 & DT...life goes on though...
zervic said:
Hmm...i wanted to try using this "juwe" script but it won't boot...i'm assuming some sort of conflict with darktremor. I also wanted to go to S2E but the last time i tried to go from DT to S2E, everything went haywire and i had to restore an old back up because i rookishly forgot to make one before i started fuxing with S2E...hmph guess i'm stuck with 8-9-1 & DT...life goes on though...
Click to expand...
Click to collapse
Your best bet would be to do a Titanium Backup of all user apps, install the ROM fresh, then install S2E, reboot, then restore the backups of user apps and your S2E transition is complete.
Sent from my Liberty using XDA Premium App
^^^ titanium is godly! S2E is worth it, imo. do a fix permission in ROM manager afterwards and a couple re-boots and bam! Butter smoothness
Anybody with the vibration mode not working when receiving calls? I turned vibrate on pretty much everywhere and yet when receiving call, the phone does not vibrate. However, it does vibrate when I receive a text message. Help!
Sent from my Liberty using XDA App
EDIT: I just toggled from the "Default" profile to "Work" and then back to "Default" and now it works. Strange...
Very legit! My girl loves Cynogen!
Almost did a battery pull on first boot. Coming from an older Nightly. Right as I was pulling off the backplate though, the screen went dim and the keys lit up, and everything loaded. So be patient guys on first boot.
My you guys have been busy. Very polished, so many new features.
Just came back to CM7 after about 3 mo. on the Sense ROM. I use GPS constantly, so I have been testing it extensively today. Happy to say Maps, Nav, and this geotagging app I have all work really well.
Zero problems so far, congrats!
Ok guys (and girls), here's a problem I've been dealing with for over a week now. Any help would be appreciated. I have been keeping up with the nightly builds and on nightly 213 and forward (including this stable release), I have found that my phone will stop receiving data after around 8 hours after a reboot. The only way for the data to work again is to reboot. This occurs on both mobile data (3G) and wifi connections. I have rolled back to nightly 208 and the problem doesn't occur. I have uninstalled all new apps since this started occurring, so I know it is not an application problem. I installed 7.1.0 stable with a full wipe, so that's not the problem. I don't think it is similar to the problem reported in post #4 of this thread because my Access Point information under Mobile network settings are the same in my working N208 as they are in the non-working 7.1.0. Also, neither version had a password, so following the directions in post #4 I put in the password CINGUALR1 on the 7.1.0 stable version, and the problem still persisted.
I am running DC's 8.9.1 and Juwe's RAM script, though I have been told neither of those could be the culprit.
Any suggestions, please?
something with your setup - have been running since last night and have not rebooted since and have had no connectivity issues at all.
What's the earliest nightly build that has the problem for you?
Did you format your system partition before the clean install?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Your warranty is now void.
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you
.
Although many things work, there is still a lot of things we need to work out and fix.
After we get everything working, then I will no longer be maintaining this thread. I will turn it over to anyone who wants it. Since I have so many other projects going on.
This thread is specifically targeted in fixing the issues.
Please prune and post your logcats to pastebin.com.
Please include what you did to recreate the issue at hand.
If you figure out a fix, please update us with exactly what you did.
Instructions
- Read known issues ans FAQs
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Wipe /cache, /system, /data, /dalvik
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
source code for the t769
I will update source code weekly with upstream. I will update fixed issues as they occur.
Special thanks to:
ktempleton
j3r3
The donators (Please PM so I can add your xda user name instead of your real names...lol)
jparnell8839
Download Links and Changelog/issue tracker
Gapps
For radio issues check post #31 (thanks jparnell8839 )
For now, the date will determine the build/version number (look at the date which are the numbers before "UNOFFICIAL")
Mostly Official cm-10.1-20130922-UNOFFICIAL-t769.zip
Camera fixed
userdebug added to build type
RC cm-10.1-20130903-UNOFFICIAL-t769.zip
Changelog:
With WiFi now working, we can move to a release candidate
RC build
Fixed WiFi
Fixed intermittent gallery crash
Initial WIP build (Release candidate)
cm-10.1-20130729-UNOFFICIAL-t769.zip
Fixed intermittent audio void
Fixed sdcard mounts
Fixed usb/otg connection (must go to system settings/storage, tap menu key, select usb computer connection and change it to mass storage)
Bug tracker:
WiFi signal intermittently low
Camera still not working
GPS doesn't seem to get a lock (someone please test)
Testers, please update me. I still need feedback on bluetooth, video, etc...
I am tracking that radio, data, calls, mms/sms are all working fine.
FIRST
Edit: YES AHAHHAHA.
xWolf13 said:
FIRST
Edit: YES AHAHHAHA.
Click to expand...
Click to collapse
Really? lol... Like little kids in a candy store...lmbo!
thomas.raines said:
Really? lol... Like little kids in a candy store...lmbo!
Click to expand...
Click to collapse
Yup ahaha. Been refreshing this whole dev section once you posted "lets move to this to the dev section".
Thanks Thomas (':
http://goo.im/gapps/gapps-jb-20130301-signed.zip
Link for gapps 4.2.2
Sent from my GT-N7100 using xda app-developers app
lol great, now I need to download the new build and get fresh logcats!
as always, if you need a mirror, my server is open not the fastest, my ISP wont let me go any higher than 5mb/s, but it's stable
I'll download and start testing the build
Sent from my GT-N7100 using xda app-developers app
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
jparnell8839 said:
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
Click to expand...
Click to collapse
When you connect a device running Android 4.2.2 or higher to your computer, the system shows a dialog asking whether to accept an RSA key that allows debugging through your computer.. You confirm it and you can get the log.
jparnell8839 said:
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
Click to expand...
Click to collapse
Thanks for the offer on the mirror... I have 2 sites I use, one main and one just in case...lol... But you are welcome to upload it and post the link... I'll include it in the dl section.
As for your issues, I'm tracking the camera/gallery issue and of course wifi. as for data, have you tried using a different radio? Torch is working fine for me. Try downloading/flashing again. Might have gotten a bad flash/download (doubtful, but let's try it). Also, has the log changed or is about the same?
for the logcat to work change the type of usb connection to camera. It worked for me.
theprogram1 said:
for the logcat to work change the type of usb connection to camera. It worked for me.
Click to expand...
Click to collapse
Go to System settings/About phone and tap Build number several times until it tells you that you are a developer. Then you will have developer options and can now enable adb debugging...
Hey Thomas there is a fix for the camera crash on gerrit
http://review.cyanogenmod.org/#/c/46310/
Its for 4.3 but should work with 4.2 same logic
Sent from my SAMSUNG-SGH-I577 using xda premium
For those still getting device offline in adb. my n4 does this every time I switch between mine and my wife's. First make sure SDK is up to date. Secondly if it still does it. Tap the USB debugging option in developer options on and off again several times and the dialog box asking to accept the computer should come up. . Its not a for sure way to get it to work but this usually works for me.
Sent from my Nexus 4 using xda app-developers app
ktempleton said:
Hey Thomas there is a fix for the camera crash on gerrit
http://review.cyanogenmod.org/#/c/46310/
Its for 4.3 but should work with 4.2 same logic
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
The patch is already present... but I'm going to add it to the boardconfig.mk and see if it works...
I'm not sure if all of it was there but there were changes in the kernel and common folders as well as v media and display caf
They discuss them in detail here
http://forum.xda-developers.com/showthread.php?t=1798056
Sent from my SAMSUNG-SGH-I577 using xda premium
ktempleton said:
I'm not sure if all of it was there but there were changes in the kernel and common folders as well as v media and display caf
They discuss them in detail here
http://forum.xda-developers.com/showthread.php?t=1798056
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
I got it in there... let's see if it works... tomorrow... I've screwed the phone up anyways, so I'm stuck trying to fix that for now...lol
10.1 comes out as soon as i switch to the Nexus 4! Haha, well great job raines, and all else who contributed. Proud of you guys.
aronianchici said:
10.1 comes out as soon as i switch to the Nexus 4! Haha, well great job raines, and all else who contributed. Proud of you guys.
Click to expand...
Click to collapse
Switched to a nexus 4 a few months back from the blaze. You will love the development section for it(;
Sent from my Nexus 4 using xda app-developers app
THE PROJECT IS ABANDONED
This ROM is for the AT&T SGH-I437 ONLY! It is NOT for the GT-I8730! Just because Samsung named them both "Express" does not mean they have identicle internal hardware!
My work is the continuation of jt1134’s. It’s basically his work. The things I had to fix (I still have to upload them :/ ) are very irrelevant compared to his work, for which I thank him.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads and installation
You can find the download links and the installation instructions here. (last update: April 24, 2015)
A test build of CyanogenMod 12.1 is up! Make sure you back-up and carefully read the post. You can find the downloads here. (updated July 30 2015).
Reporting Bugs
You are allowed to report bugs only in this thread and in my blog post as comments. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY OR IN MY BLOG POST.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Recovery used to flash the ROM:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
FAQ
Can I request a feature?
If it is a feature in general CyanogenMod, please post the request at the CyanogenMod bug tracker.
http://jira.cyanogenmod.org
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 12.0 for Samsung ExpressATT (SGH-I437), ROM for the Android General
Contributors
davideddu96, jt1134
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2015-04-02
Last Updated 2018-02-04
davideddu96 said:
Downloads and installation
You can find the download links and the installation instructions here.
Click to expand...
Click to collapse
Thank's for the new thread. But we can't download the new build causse the we have the message "http://goo.gl/HCNeuX – this goo.gl shortlink has been disabled"
The 03.12 build has better wifi than all febrary and december builds but in this build bluetooth stop working for me (it was working on all precedents cm12 builds made available here).
I can't comment on your blog, it's keep telling me that my comment is a spam.
Can't download as link disabled.
Changelog would be nice if u can provide.
Thanks @davideddu96
Rodney SANK said:
Thank's for the new thread. But we can't download the new build causse the we have the message "http://goo.gl/HCNeuX – this goo.gl shortlink has been disabled"
The 03.12 build has better wifi than all febrary and december builds but in this build bluetooth stop working for me (it was working on all precedents cm12 builds made available here).
I can't comment on your blog, it's keep telling me that my comment is a spam.
Click to expand...
Click to collapse
pandyag said:
Can't download as link disabled.
Changelog would be nice if u can provide.
Click to expand...
Click to collapse
Sorry guys, I didn't know about that policy. I had to change the link shortener. I decided to use adfly, which has less stupid policies and supports my work.
I hope you're OK with that.
OK just install 5.0 now it dose not have any root access before I reboot recover it ask to fix root I hit yes and still no root even type it terminal eliminator su
Go to developer option in setting and select root..
cwbcwb said:
OK just install 5.0 now it dose not have any root access before I reboot recover it ask to fix root I hit yes and still no root even type it terminal eliminator su
Click to expand...
Click to collapse
Do not use the root fixer with cm. Reinstall the ROM and enable root from development settings like pandyag said. Root settings are now in appops (settings,privacy).
@davideddu96 the 5.0 runs smooth love it keep up the work I had it install about a day and no issues
I have a question about Heimdall. I've always used Odin before, but figured that I'd just go ahead and try to install using your exact instructions. Your TWRP comes as an .img file but Heimdall seems to want a tar.gz file. I gave a quick internet search and it seems like a pit file is needed to flash an .img?
I'm probably missing something, and I doubt that I'm the only one so some instructions on exactly how to flash your recovery using Heimdall might be useful not just to me. I'd hate to brick my phone messing around with pit files. I never needed one with Odin.
I have an older version of Clockwork Mod installed and I"m just going to go ahead and try to install using that. It should be ok, right?
invert_nexus said:
I have a question about Heimdall. I've always used Odin before, but figured that I'd just go ahead and try to install using your exact instructions. Your TWRP comes as an .img file but Heimdall seems to want a tar.gz file. I gave a quick internet search and it seems like a pit file is needed to flash an .img?
I'm probably missing something, and I doubt that I'm the only one so some instructions on exactly how to flash your recovery using Heimdall might be useful not just to me. I'd hate to brick my phone messing around with pit files. I never needed one with Odin.
I have an older version of Clockwork Mod installed and I"m just going to go ahead and try to install using that. It should be ok, right?
Click to expand...
Click to collapse
Ok, here's how to do it with Heimdall (aren't there guides online?)
You boot your phone in download mode and connect it to the computer
Open heimdall, go to the utilities tab and download the pit to your computer (you only need to do it once, the next times you can use the same pit). Hit "save as", choose a path and a file name and then click "Download"
You may have to reboot your phone the hard way (take the battery out, put it back in) into download mode again after downloading PIT. My phone can only do one operation at a time for some reason
Now go to Flash, open the PIT you downloaded, press Add under partitions, select "RECOVERY" in the "Partition Name" menu and open the recovery image you got from my blog.
Hit flash!
If you have stock, make sure you don't let the phone reboot to Android or it will wipe your recovery! Either start holding Volume up and home while it's flashing, so that it will boot straight to recovery or take the battery out as soon as it's done.
EDIT: by the way yes, CWM should work, if it's not too old. TWRP is what I use and that's mainly why I advise you to use it: if you have an issue with it, chances are that I have it too, and you're going to save me from flashing your recovery to troubleshoot it.
A new build is online! The download link has already been updated: http://davideddu.org/blog/posts/cyanogenmod-12-for-expressatt/
From now on the first post title will have the last build release date at the beginning. This way, when you get a notification from XDA, you'll know at a glance if you have the latest version
Also, to save you from looking up the download links on Google, I've added a shortcut to the downloads in my homepage at http://davideddu.org . It's in the middle of the page, at the end of the first white box
I also posted a more complete, step-by-step guide on how to flash recoveries with Heimdall using both the GUI and the command line (which I definitely prefer).
http://davideddu.org/blog/posts/how-to-flash-a-recovery-image-using-heimdall/
davideddu96 said:
Ok, here's how to do it with Heimdall (aren't there guides online?)
You boot your phone in download mode and connect it to the computer
Open heimdall, go to the utilities tab and download the pit to your computer (you only need to do it once, the next times you can use the same pit). Hit "save as", choose a path and a file name and then click "Download"
You may have to reboot your phone the hard way (take the battery out, put it back in) into download mode again after downloading PIT. My phone can only do one operation at a time for some reason
Now go to Flash, open the PIT you downloaded, press Add under partitions, select "RECOVERY" in the "Partition Name" menu and open the recovery image you got from my blog.
Hit flash!
If you have stock, make sure you don't let the phone reboot to Android or it will wipe your recovery! Either start holding Volume up and home while it's flashing, so that it will boot straight to recovery or take the battery out as soon as it's done.
EDIT: by the way yes, CWM should work, if it's not too old. TWRP is what I use and that's mainly why I advise you to use it: if you have an issue with it, chances are that I have it too, and you're going to save me from flashing your recovery to troubleshoot it.
Click to expand...
Click to collapse
Thanks.
It was the pit file that bothered me. I puzzled my way through the controls and gathered that that was how to do it, but I wanted confirmation who'd done exactly that thing to this particular phone because... well... you know, sometimes things don't always work the same. Plus, I figured that I'd probably not be the only one with some questions in this regard, so I'd be the fall guy.
Went ahead and installed with the older CWM recovery and all is working fine as of now. I noticed some passing comment in the other thread that Google Maps didn't work, but it works fine with me.
---------- Post added at 02:52 PM ---------- Previous post was at 02:45 PM ----------
davideddu96 said:
A new build is online! The download link has already been updated: http://davideddu.org/blog/posts/cyanogenmod-12-for-expressatt/
From now on the first post title will have the last build release date at the beginning. This way, when you get a notification from XDA, you'll know at a glance if you have the latest version
Also, to save you from looking up the download links on Google, I've added a shortcut to the downloads in my homepage at http://davideddu.org . It's in the middle of the page, at the end of the first white box
Click to expand...
Click to collapse
I'm having issues downloading the new build. It downloads a 0 kb file.
Also, does this have the new kernel you mentioned?
Use flashify to do recovery u can get it in market
Sorry for the download issue, the ROM has been uploaded but it has not been copied to the mirror.
I'm working on it.
EDIT: I just contacted the technical support and I'm waiting for an answer. The previous build is still available, however; you can get it from here.
Yes, it's including the most recent kernel.
I don't have issues with Google Maps either.
invert_nexus said:
I'm having issues downloading the new build. It downloads a 0 kb file.
Also, does this have the new kernel you mentioned?
Click to expand...
Click to collapse
I got back from the technical support and I've been told it's all regular. As it's a big file, its upload to the mirrors is being delayed. Please check again in a few hours. I'm sorry for the issue, I wasn't aware of this policy.
EDIT: I just checked again and the file is in the process of being uploaded. Just wait for ~30 minutes and you should be able to get it.
EDIT2: The file has been uploaded. It is now downloadable.
As I said in the previous answer, yes it does have the new kernel, which means I didn't have to patch the installer. You can turn back on signature checking if you turned it off.
Thanks for the ROM
Hi David, thanks for the love you are giving for this device, anyways I can't download the rom, maybe can you upload it anywhere else? The webpage is not opening so maybe try dev-host as its the best.
Samkitpalecha said:
Hi David, thanks for the love you are giving for this device, anyways I can't download the rom, maybe can you upload it anywhere else? The webpage is not opening so maybe try dev-host as its the best.
Click to expand...
Click to collapse
Try to turn off AdBlock; that's probably why you can't get to the downloads. I decided to route them through AdFly because it takes a lot of electricity to build the ROMs (it takes around 6 hours during which I'm not home and the computer is running, hotter than an oven with the fans that sound like a vacuum cleaner). If it still doesn't work for you, you can find a direct link right below the standard links, after the bulleted list. You don't have to, but I would appreciate it if you would add an exception to your ad blocker for "davideddu.org" and "go.davideddu.org"
I tested the downloads yesterday and they are working.
Let me know if you still have issues with the downloads, so that I can contact my hosting provider!
EDIT: I just tested the download links and they work fine. Let me know if you still have issues. Have a nice day
davideddu96 said:
Try to turn off AdBlock; that's probably why you can't get to the downloads. I decided to route them through AdFly because it takes a lot of electricity to build the ROMs (it takes around 6 hours during which I'm not home and the computer is running, hotter than an oven with the fans that sound like a vacuum cleaner). If it still doesn't work for you, you can find a direct link right below the standard links, after the bulleted list. You don't have to, but I would appreciate it if you would add an exception to your ad blocker for "davideddu.org" and "go.davideddu.org"
I tested the downloads yesterday and they are working.
Let me know if you still have issues with the downloads, so that I can contact my hosting provider!
Click to expand...
Click to collapse
Adfly doesn't works in India.
Sent from my SM-G900H using XDA Free mobile app
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
This is a UNOFFICIAL build of LineageOS for the Samsung Galaxy Core Plus.
It's not ready yet and has some bugs in it which could cause problems to some users.
The ROM will only work on the SM-G350 Version of the Phone (without any Numbers/Letters behind).
This ROM could be used for daily use now (though you should look at the list of what doesn't work first).
Known Bugs
Camera sometimes switches to green-purple. The resulting picture doesn't have the weird color, but it may be flipped and/or distorted at the edges.
Video Recording
Codecs (some work, some don't. I tested MP4 and AVI, both work. I should really make a list...)
Installation Instructions
Special thanks to @Giovix92 for making this tutorial!
Requirements:
1: A computer with Windows.
2: An Internet connection.
3: A backup of your phone data (contacts, photo, music, videos, and other).
4: About 300 MB free space on your SD card.
5: Phone charged at least 80%.
Download links are below
I do NOT take any responsibility for bricked devices!
Let's start!
1: Download the Samsung USB Drivers.
2: Download the ODIN3. (Only for Windows)
3: Download the TWRP Odin package to your desktop and download the LineageOS 13 zip to your SD card.
4: Make a backup of your files, because the storage will be wiped. (External SD card will not be wiped)
5: Reboot your phone in to the Download mode (Volume Down- , Home- and Power button). Press the Volume Up button when asked. Then open the ODIN3 and connect your phone to your PC.
6: Press AP and choose the TWRP Odin package (recovery.tar) and make sure re-partition is NOT ticked. "Auto-Reboot" should not be ticked either, otherwise you will need to be quick to boot into the recovery immediately after flashing.
7: Press start! Wait a few seconds. Then your phone will be rebooted. Now you can disconnect the cable and power off your phone.
8: Boot your phone in to the TWRP Recovery (Volume Up-, Home- and Power button).
9: Go to Wipe, and Swipe to Factory Reset.
10. After wiping go to the home screen by pressing the home button.
11: Go to Install. Choose the "external_sd" from the top bar. (It says "Storage: Internal Storage (xxxxMB)" by default)
12: Choose the LineageOS 13 ZIP and Swipe to Confirm Flash. Make sure you don't power off while flashing!
13: After the zip has been flashed choose "Reboot System".
14: Wait 5-15 minutes to boot the phone. If the phone keeps booting take out the battery and do a Factory Reset again.
15: When the phone boots the first time, go through the Setup Wizard and you are ready to use your phone!
If there was something you didn't understand, please don't hesitate to ask
Changelog
23-01-2021:
Security patches until April of 2019
Updated Chromium from 67.0.3396.87 to 87.0.4280.101
Disabled latinimegoogle (which is compiled against an incompatible instruction set and results in crashes)
Fix offline charging
Old Changelogs:
02-05-2019:
Include all security patches up to January 2019 (and most of February and March, except for the PNG vulnerability)
NFC
Fix up some of the codecs (h264 and ac3, which should enable you to watch most videos)
Remove Gello (the old, bloated Browser) in favour of Jelly
Using way less hacks than previously (again)
05-04-2018:
Include all security patches up to March 2018
SELinux is now enforcing
OTA Updates the third (now using the internal Updater)
Using way less hacks than previously
24-05-2017:
Now compile with newest toolchain (Commit)
Fix SD Card (Device commit, Kernel commit)
Removed PMEM from the kernel (as this saves some RAM) (Commit)
OTA Updates (Commit)
18-04-2017:
Switch to LineageOS
4 Months of Security Patches
10-04-2017:
Fixed GApps (through a modified WebView)
07-04-2017:
Fixed Network (Commit)
Enabled permissive SELinux (Patch, Commit)
10-10-2016:
Bringup
Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
TWRP 3
TWRP 2.8.1.0
lineage-13.0-20210123-UNOFFICIAL-cs02.zip
Sources
Device tree
Kernel tree
Proprietary files
WebView
Thanks To/Credits
Thanks to ...
... androidlover5842, ishantvivek, SandPox, ZIM555 and everyone else working on Samsung's hawaii-Boards
... berkantkz and santeri3700 for teaching me the basics of ROM developing
First Version of CM 13 is up
First! Good rom man!
Inviato dal mio ASUS_Z00A utilizzando Tapatalk
Hey !
i was happy when i saw that cm13 was out for our galaxy core plus so now i'm downloading it. After i will flash it if you want i can be a beta tester.
Thanks for this rom !
---------- Post added at 07:04 PM ---------- Previous post was at 06:42 PM ----------
I installed it and for me the bigest problem is the wifi.
gaetano76le said:
Hey !
i was happy when i saw that cm13 was out for our galaxy core plus so now i'm downloading it. After i will flash it if you want i can be a beta tester.
Thanks for this rom !
---------- Post added at 07:04 PM ---------- Previous post was at 06:42 PM ----------
I installed it and for me the bigest problem is the wifi.
Click to expand...
Click to collapse
Still working on that.
I just noticed that the sound sometimes "breaks" and sounds like damaged speakers (just for a part of a second, nothing permanent). I don't know if this is a software problem or just my phone. Can someone confirm that? It sometimes happens when doing a call or pressing random numbers at the Dialer. It also seems to happen only with standard sound level or higher.
I'll check it after I fixed (or tried to fix) Internet and SD Card
This is the same on stock when listening YT idk why it happens.
For the sdcard fix check if there are correct mounts for vold.fstab or framework
BTW. Videoplayback isnt working good on YT on Internet browser and is glitched too on chrome.
TimSchumi said:
I just noticed that the sound sometimes "breaks" and sounds like damaged speakers (just for a part of a second, nothing permanent). I don't know if this is a software problem or just my phone. Can someone confirm that? It sometimes happens when doing a call or pressing random numbers at the Dialer. It also seems to happen only with standard sound level or higher.
I'll check it after I fixed (or tried to fix) Internet and SD Card
Click to expand...
Click to collapse
bump
@TimSchumi
http://forum.xda-developers.com/s7582/development/rom-cm13-0-galaxy-s-duos-2-trend-plus-t3307986
Maybe talk with this guys to allow to use their source? Will be easier to fix rom and you will can to support them too
So, any changes about the network?
QGM said:
bump
@TimSchumi
http://forum.xda-developers.com/s7582/development/rom-cm13-0-galaxy-s-duos-2-trend-plus-t3307986
Maybe talk with this guys to allow to use their source? Will be easier to fix rom and you will can to support them too
Click to expand...
Click to collapse
Thanks for searching :good:
I'll write to developer and ask for the fix!
john_sdr said:
So, any changes about the network?
Click to expand...
Click to collapse
Not now, still working on it. I don't even know where to search.
something about the vpn? or maybe something isnt compatible with cm13?
I searched on google and disable the firewall could be a solution.
john_sdr said:
something about the vpn? or maybe something isnt compatible with cm13?
Click to expand...
Click to collapse
Seems to be a more general problem. I'll look through the device/kernel/vendor trees of similiar devices for a fix.
SpYneX_ said:
I searched on google and disable the firewall could be a solution.
Click to expand...
Click to collapse
Could you test it?
TimSchumi said:
Seems to be a more general problem. I'll look through the device/kernel/vendor trees of similiar devices for a fix.
Could you test it?
Click to expand...
Click to collapse
How could you even disable a device's firewall?
Well, i just red here "https://forums.oneplus.net/threads/official-cm13-nightly-builds-rolling-out-for-opo.411202/page-103" that its may be fault of the recovery. I dont think that we all got the same twrp though, is something you can test? i used santori's twrp, i had it flashed quite a time. maybe an update or a modification will solve that issue
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
zenida said:
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
Click to expand...
Click to collapse
allright, i'll check up for a twrp for our phone :angel:
EDIT: on the official twrp/devices, there is not our device. so, what's up next?
Hey, I'm new here at xda forums. I just installed this ROM on my galaxy core plus, and it works great. My phone is now super snappy. But many features don't work as of now, the bluetooth actually worked for me, I didnt expect it to after reading the post. When will these bugs be fixed, and more importantly how can I follow so that I can get my hands on the new release as soon as it gets out? Thanks a lot!
zenida said:
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
Click to expand...
Click to collapse
john_sdr said:
allright, i'll check up for a twrp for our phone :angel:
EDIT: on the official twrp/devices, there is not our device. so, what's up next?
Click to expand...
Click to collapse
I also could try to make CM Recovery first, and if it won't work, I'll give TWRP a try.
Abiti7 said:
Hey, I'm new here at xda forums. I just installed this ROM on my galaxy core plus, and it works great. My phone is now super snappy. But many features don't work as of now, the bluetooth actually worked for me, I didnt expect it to after reading the post. When will these bugs be fixed, and more importantly how can I follow so that I can get my hands on the new release as soon as it gets out? Thanks a lot!
Click to expand...
Click to collapse
I still need to search what causes the Internet and SD Card to fail. Bluetooth does work, only Bluetooth Calls, Car connection and other devices are untested.
You can subscribe to this thread or subscribe to the DevDB project, to get a notification if it's updated. To get updates on your Smartphone, you could install XDA Legacy (Tapatalk) or XDA Labs (just called XDA) from Play Store.
john_sdr said:
allright, i'll check up for a twrp for our phone :angel:
EDIT: on the official twrp/devices, there is not our device. so, what's up next?
Click to expand...
Click to collapse
zenida said:
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
Click to expand...
Click to collapse
CM Recovery didn't fix the problem. And I somehow can't get TWRP to boot.