Database Info

[ROM][SM-G313H/HZ/ML]CyanogenMod 13 for Samsung Galaxy V

The original development thread is here. Since @doesntexits does not develop for this phone any more, I asked him to make this clone and he accepted.
CyanogenMod is a free, community built, after-market firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
Are running a custom kernel
Have flashed mods
Modified system files
Didn't follow our instructions word by word
Are unfriendly
And most important: DON'T READ THE OP
What's working:
RIL (Calls, SMS, Mobile data)
Wifi (connection, tethering)
Bluetooth
Camera, video codecs
Storage (internal, external and adoptable storage)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS (except Device Only mode)
Torch (flashlight)
WiFi-Direct
SELinux enforcing
LZ4 compressor/de-compressor for zRAM
BUGS/Not working:
FM radio app FC (due to missing libraries)
Distorting sound when using Bluetooth headset in call or in recording
First time installing CyanogenMod 13 to your Galaxy V, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
Mirrors:
Stable-1: MF
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Ace 4
Contributors
ngoquang2708, doesntexits
Source Code: https://github.com/ngoquang2708/android_device_samsung_vivalto3gvn/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.2
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-09-12
Created 2016-08-28
Last Updated 2016-09-12

Reserved
CHANGELOG
ALPHA-1
Initial release
BETA-1
Fixed RIL, switched to beta builds
Switched to AOSP charging module
Fixed screen flickering
Fixed audio
BETA-2
Fixed screen flickering.
Fixed audio, now you can maximize your volume!
BETA-3
Fixed AudioFX
Fixed WiFi auto-disconnect
Working WiFi-Direct
No more "lock" at Setup Wizard
SELinux is now in Enforcing mode
BETA-4:
Fixed battery drain
Added lz4 compressor/de-compressor for zram
STABLE-1:
Fixed GPS (except Devide Only mode)
Fixed mobile data switching

Reserved
F.A.Q
Q: ROM startup too slow?
A: This device is just a single-core phone, so the first startup is super-duper slow, and some lags are expected during usage
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G313ML, SM-G313H
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can i use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Status 7 when installing the ROM?
A: Use TWRP recovery to install the ROM, as CWM is not supported yet
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section

@ngoquang2708 said in the CLOSED THREAD: I do not think screen lock when you are pulling the notification drawer is a bug. You have to unlock your screen to do things, right?
About "wakelock", didn't I fix it, or you misstyped it?
Man, you did fix that wakelock thing in the Beta 3, but it's happening someting similar with me (that why I thought it has a wakelock thing), when I click on the bottom of the screen happens that damn thing showed in the screenshot (only when i click in the bottom).
I wonder if I'm the only one with this problem, this has happened with you @ngoquang2708?

Hey bro, hopefully soon solve the problem of GPS, lock screen and the annoying message from the SIM Card
Thank you so much for your work

Not work for my the module aosp offline charging

Hi. I tried installing SuperSu but it keeps on failing, the Su binary can't be installed for some reason. I tried rebooting as it says but still gives the same error. I already enable the root access in developer options and gave permission but it just doesn't work, is there any fix?
Also can I install OC Kernel? I would love to overclock a bit if i can?
Any help would be greatly appreciated!
Thanks in advance guys!

JominatorX said:
Hi. I tried installing SuperSu but it keeps on failing, the Su binary can't be installed for some reason. I tried rebooting as it says but still gives the same error. I already enable the root access in developer options and gave permission but it just doesn't work, is there any fix?
Also can I install OC Kernel? I would love to overclock a bit if i can?
Any help would be greatly appreciated!
Thanks in advance guys!
Click to expand...
Click to collapse
Why do you want SuperSu on CM? It isn't supported
For now you can't install OC kernel, as the ramdisks are outdated. I'll make a ZIP for all ROMs now

doesntexits said:
Why do you want SuperSu on CM? It isn't supported
For now you can't install OC kernel, as the ramdisks are outdated. I'll make a ZIP for all ROMs now
Click to expand...
Click to collapse
Oh I see, I just feel like SuperSu is better than the privacy guard. I'll look forward on the updated OC Kernel, Thanks a lot Dev!

JominatorX said:
Oh I see, I just feel like SuperSu is better than the privacy guard. I'll look forward on the updated OC Kernel, Thanks a lot Dev!
Click to expand...
Click to collapse
I have updated OC kernel link. Can you check it out?
This time the kernel doesn't need ramdisk, so it can be easily replaced between all ROMs

doesntexits said:
I have updated OC kernel link. Can you check it out?
This time the kernel doesn't need ramdisk, so it can be easily replaced between all ROMs
Click to expand...
Click to collapse
I downloaded it but still waiting for my phone to boot up, I flashed xposed and its optimizing apps now. Usually take around 30mins or so on other roms. Probably the same with cm13.

doesntexits said:
I have updated OC kernel link. Can you check it out?
This time the kernel doesn't need ramdisk, so it can be easily replaced between all ROMs
Click to expand...
Click to collapse
I have just flash OC kernel and it booted up just fine. I still dont have apps/games installed so I cant tell if the soft reboot still happens.
Which i/o scheduler and governor is the best for gaming btw?

JominatorX said:
I have just flash OC kernel and it booted up just fine. I still dont have apps/games installed so I cant tell if the soft reboot still happens.
Which i/o scheduler and governor is the best for gaming btw?
Click to expand...
Click to collapse
What app did you use in those screenshoots?

ngoquang2708 said:
What app did you use in those screenshoots?
Click to expand...
Click to collapse
Kernel Auditor. It's free and light.

JominatorX said:
Hi. I tried installing SuperSu but it keeps on failing, the Su binary can't be installed for some reason. I tried rebooting as it says but still gives the same error. I already enable the root access in developer options and gave permission but it just doesn't work, is there any fix?
Also can I install OC Kernel? I would love to overclock a bit if i can?
Any help would be greatly appreciated!
Thanks in advance guys!
Click to expand...
Click to collapse
Try to activate and deactivate the Root Permission again in Apps and ADB or Apps Only, and then give Root Permission when it asks (it worked for me when I was with this problem).
---------- Post added at 09:43 PM ---------- Previous post was at 09:08 PM ----------
JominatorX said:
I have just flash OC kernel and it booted up just fine. I still dont have apps/games installed so I cant tell if the soft reboot still happens.
Which i/o scheduler and governor is the best for gaming btw?
Click to expand...
Click to collapse
I recommend you see this guide thread about the CPU and I/O Scheduler: http://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
About the best CPU, I/O Scheduler, i'm not sure but, let me give you a example: When i play in Drastic DS Emulator and switch the CPU and I/O to another one than the default, the screen freezes in the middle of the game and defrost later (about 30secs and 1min), but when I play in the default (Intelliacive/BFQ) it goes smoother with no screen freezes.

I had read about the new Systemless Root by Chainfire, it can root (and install Chainfire Supersu of course) without modifying system, it done with flashing mod boot.img ... Anybody try in this ROM ? Or it is not supported ? Or it is pointless ?
Sent from my SM-G313HZ using Tapatalk

any way to change the path of the external sd, change the path in format numeric for this "storage/extSdCard"
well is that it is not possible restore backup user apps from titanuim the option to extract a backup nandroid. Thanks in advance

Idayrad said:
I had read about the new Systemless Root by Chainfire, it can root (and install Chainfire Supersu of course) without modifying system, it done with flashing mod boot.img ... Anybody try in this ROM ? Or it is not supported ? Or it is pointless ?
Click to expand...
Click to collapse
No need to do that, you just need to download and install supersu from the play store. After installation disable and re enable root access make sure its apps and adb. Worked for me.
---------- Post added at 08:31 PM ---------- Previous post was at 08:30 PM ----------
DavidGR15 said:
any way to change the path of the external sd, change the path in format numeric for this "storage/extSdCard"
well is that it is not possible restore backup user apps from titanuim the option to extract a backup nandroid. Thanks in advance
Click to expand...
Click to collapse
You should format it as portable.

jesusadolfog said:
Hey bro, hopefully soon solve the problem of GPS, lock screen and the annoying message from the SIM Card
Thank you so much for your work
Click to expand...
Click to collapse
What kind of annoying message? A screenshot would help.

I can port?
Hi my friends! I would port for my device (SM-G318ML) I Can port and modify?

[GUIDE][AOSP][7.1.2][HLTE][Rev11][11-Mar-18]Resurrection Remix - Rock Stable Setup

During the last few months I have been testing several Nougat rom/kernel/modem/su combinations for the hlte N9005 international.
I created this thread to share my setup, hoping it will help others to save the many hours of research, trial, error and frustration I had before reaching the jackpot.
I have 3 hlte phones at my disposal, two myself and one my wife. All three are running trouble free.
By using my setup you will get:
Absolutely no freezes, reboots or FCs
Stable root and Safetynet checks ok
GPS fast and stable fix - average 5 seconds worst 20 seconds
Low battery drain (of course actual drain depends heavily on your apps and usage)
Everything works (AFAIK - you tell me what does not)
Keep in mind my main goal is to provide a stable setup. I will do my best to update this thread regularly, but it is very unlikely I will be using the very latest builds available, mainly because before I adopt a new build it must be thoroughly tested.
If you're interested head to the guide in Post #2
Why Resurrection Remix?
RR has, IMHO, the best combination of features and stability. The RR team has been around for a long time without the ups and downs of other roms. For the Note 3 we are in a very fortunate time, with an official build and many unofficial builds to choose from.
Since RR is based on LineageOS, it is available for most devices. It is very likely when we finally retire our Note 3 and move to another flagship, RR will be there for it.
Why Not Oreo?
Well, thread title says it all.
Credits and Thanks:
@vidwhal for the current RR build
@gj86 for Synergy kernel
@Jairus980 for Xenial kernel
@Hereiwas and @jcadduono for modems and bootloaders
@topjohnwu for Magisk
@stangri and @kantjer for Magisk unofficial daily beta builds
@Deic for the Safetynet fix Magisk module and @NovelliJack for finding the module
@MastahF and all other contributors that made the Open GApps project possible
Special thanks to @tarkzim for the RRN build used in initial setups.
and everyone else I forgot to mention.
>>>>>>> I know - screenshots below are from a previous setup. I will update then sometime in the future.

Rock Stable Setup
Using Resurrection Remix
Revision 11 - 11-Mar-2018​
Phase 1 - Prepare for install
Here I am assuming you have a Windows PC. If not you will need to use google search to adapt my instructions to your available OS/hardware. The PC is only required for this phase.
1 - Samsung USB Driver:
Make sure you have the Samsung USB driver installed in your Windows PC.
If not download and install the latest driver:
- SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.65.0.exe
2 - Odin:
If you do not have Odin, get it here, unpack to any folder and create a shortcut pointing to Odin3 v3.09.exe.
There are newer versions of Odin, but they may have issues with our Note 3. Odin v3.09 is the one to use.
3 - TWRP
New to TWRP? Read this guide: TWRP: the complete guide to using Recovery on Android.
If you do not already have it, install TWRP 3.2.1-0. Download it from https://dl.twrp.me/hlte. More info here.
If you no not have TWRP installed download the .tar file and flash with Odin.
If you have an older version download the .img file and use your current TWRP to flash the image into recovery partition.
4 - Update Bootloader and Modem:
You have to install latest Nordic Countries Bootloader and Modem. I have prepared a "tar.md5" with both.
And yes, modem is not country or region dependent. Rest assured Nordic will work no matter where you are.
Get it from here: N9005_Nordic_XXUGPQB1-Modem_XXSGBQD1-Bootloader.tar.md5
Updating bootloader and modem is a must!
If you don't you may get the "SIM Card not detected" error and GPS fix will be slow or not work at all.
There are many sure ways to flash modem and bootloader so that they "stick". What always works for me is:
- Restart into Recovery (TWRP)
- Select Reboot->Power off
- Turn on directly into download mode by holding Down Arrow+Home+Power at the same time
- Connect phone to PC
- Flash with Odin using the AP slot
Now you should check if update was successful. The best way is to install the app Phone INFO, run it and select the Firmware tab. The correct Bootloader and Baseband (modem) above should be displayed. There is a screenshot in first post.
If the update did not work repeat the steps carefully until it does. You may, as a last resort, after powering off remove the battery, wait for about 30 seconds, reinsert the battery and then turn on directly into download mode.
Thanks to @Hereiwas for the files I have used in previous setups. Check out in his thread Bootloader and Baseband for SM-N9005.
If you need more info on flashing modems and bootloaders also take a look at @jcadduono thread [Direct Download] Latest Bootloaders & Modems.
PHASE 2 - Download the necessary installation files
1 - Resurrection Remix Nougat rom - thanks @vidwhal:
Download from here: RR-N-v5.8.5-20180101-hlte-Official-vidwhal.zip.
Please note that I am not the rom builder or developer. All credits go to @vidwhal and the RR Team.
This is the rom thread: [ROM][HLTE][UNOFFICIAL][OMS]Resurrection Remix N.
Please note this build may not be the latest available. The goal here is to have a stable rom that you will be able to use as a daily driver with no issues for a long time. Only after a lot of testing a new build makes into my setup.
I modified the zip to remove Magisk. This will make it easier to use newer or beta Magisk builds if necessary in the future. Remember Safetynet is a cat and mouse game and changes happen fast.
Special thanks to @tarkzim, who produced the RR builds used in earlier setups. He did a fantastic job of producing a very stable build without a Note 3 device for tests. His builds led me to create this thread.
2 - Magisk v16.0 Official - thanks @topjohnwu):
Magisk Installer: Magisk-v16.0.zip
Magisk Manager: MagiskManager-v5.6.1.apk (optional - you might need it in the future)
Magisk Uninstaller: Magisk-uninstaller-20180222.zip (optional - you might need it in the future)
if you decide to use newer builds do it at your own risk. I strongly recommend to keep these.
3 - Gapps:
Open Gapps Pico: open_gapps-arm-7.1-pico-20180311.zip
Not much to say here. Open GApps FTW.
Again the above build is the one I tested. Use this for a failproof installation, but feel free to use a newer build. Usually it will not be a problem.
I prefer Pico Gapps so I have the bare minimum as system apps. And I live by the KISS Principle. All other gapps I need are installed as user apps so I am allowed to use Titanium Backup to backup/restore them with data.
If you would rather use another Gapps package just pick the one you want. All packages should work but the Aroma. Aroma does not work in TWRP 3.
4 - Xenial Kernel - thanks @Jairus980:
Xenial Kernel: [Hlte][Xenial-b26x][02.01.18][N7.1-GSM].zip
Kernel thread: [Kernel][Xenial][Hlte].
With Xenial you have some fixes like the correct charging current in lock screen and working Gravity, Linear acceleration and Orientation sensors. Of course there is a lot more under the hood. If you plan to do some kernel tweaking Xenial offers more options.
If you do flash Xenial kernel do not report any bugs in RR thread. To report a bug you must first go back to stock kernel by dirty flashing RR and Magisk. If you are still able to reproduce the bug then you may post it in RR thread.
Even if there is a newer kernel release, you should keep using the build I posted here to have my tested stable setup.
Special thanks to @gj86 for his Synergy Kernel, used in my previous setup. It is also a great option.
5 - GPS Fix:
In this setup there is no need for a GPS fix. GPS is fast and rock stable as it should always have been.
But you really must update your modem to my recommend Nordic QB1 or GPS will be slow or not work at all.
Do not worry about your current location. The modem will work not matter where you are.
Latest RR builds somehow made GPS fix slower. I checked the gps.conf file and it is exactly the same as in previous builds.
I have my own optimized gps.conf, prepared originally for Marshmallow CM13, with a few more adjustments for Nougat.
After installing my gps.conf in latest RR build, gps fix is back to normal, taking only a few seconds.
I prepared a flashable zip to install my gps.conf. It saves existing gps.conf and put mine in its place.
Download it from here: Fix-GPS-for-hlte-la14.1-based-roms-v1.zip.
PHASE 3 - Backup!!
Now it is time to make backups of your current setup.
Use TWRP to make a nandroid backup. You will need it if something goes wrong. If you are paranoid like me make two and save them on your PC hard drive.
If you use Titanium make also a Titanium full backup. Remember that you should never restore system apps or settings. Use Titanium only to restore user apps and xml backups of wifi passwords, call log and sms messages.
The steps to install the new ROM will not erase your internal storage, but why not make a backup of everything to your PC or an OTG USB Drive.
PHASE 4: Install
- Make sure you have updated TWRP and your bootloader and modem as instructed in phase 1
- Make sure you have all files downloaded from phase 2 in your phone - preferably in external sdcard
- Make sure you have backups!!
- Reboot into Recovery (TWRP)
- Use advanced wipe to wipe System, Data and Cache
- Flash RR-N-v5.8.5-20180101-hlte-Official-vidwhal.zip
- DO NOT WIPE ANYTHING
- Reboot System (be patient - it will take a while, around 3-4 minutes)
- Pick your preferred launcher
- Check Settings->Date & Time and make sure it is ok
- Reboot into Recovery (TWRP)
- Flash [Hlte][Xenial-b26x][02.01.18][N7.1-GSM].zip
- Flash Magisk-v16.0.zip
- Flash open_gapps-arm-7.1-pico-20180311.zip (or the one you prefer)
- DO NOT WIPE ANYTHING
- Reboot System (this time it will be faster)
- Go to Settings->Accounts and add your google account
- Customize your other settings
- Run Magisk Manager and check if SafetyNet passes
- If not disable/reenable "Magisk Hide" option in Magisk Manager Settings and try again
- Restore/install apps/data
- PROFIT!

[Reserved]

wow, nice to see that someone using and "sharing" my builds
but a little tip for you, maybe you can ask me first before you post something are modified from me, no offense and i saw that includes my name on it.
just remind you and i think i will keep building this when i'm free, anyway, thank you for posing this. all good.
EDIT: also i think there is no need for removing magisk separately, it's fine for flashing newer magisk over the older one.

tarkzim said:
wow, nice to see that someone using and "sharing" my builds
but a little tip for you, maybe you can ask me first before you post something are modified from me, no offense and i saw that includes my name on it.
just remind you and i think i will keep building this when i'm free, anyway, thank you for posing this. all good.
EDIT: also i think there is no need for removing magisk separately, it's fine for flashing newer magisk over the older one.
Click to expand...
Click to collapse
Sorry, you are absolutely right.
Thanks for being cool with it.
The main point in changing the rom zip is removing the magisk manager system app. It is a little tricky for noobs to remove the system app to be able to install the v5 beta Magisk Manager.
And thanks again for making your fantastic RR build available.

Thank's for your work. I installed all, but then I had a problem. When I try to open settings/apps, it crashes everytime....

sperug said:
Thank's for your work. I installed all, but then I had a problem. When I try to open settings/apps, it crashes everytime....
Click to expand...
Click to collapse
This does not happen in my phones.
In my work phone I have 600+ apps installed. It takes a while to open but no crashes.
If you post a logcat I may be able to help.

I reinstalled everything, and before made a full wipe, also of the internal storage. And the problem was no more present! Wow! And thank you again...

I checked AFH and have 30+ downloads of installation files.
Any more success or failure cases? Please let me know.

This might be a silly question: You wrote I should download the latest NORDIC COUNTRY Bootloader and Modem.
Is this also correct if im not living in an other region or should I download the one from my Country? Thanks.

BobbyKa said:
This might be a silly question: You wrote I should download the latest NORDIC COUNTRY Bootloader and Modem.
Is this also correct if im not living in an other region or should I download the one from my Country? Thanks.
Click to expand...
Click to collapse
AFAIK it should work for you no matter where you are.
I live in Rio de Janeiro, Brasil and use it.
If it does not work for you just flash another one.

I tried the Nordic ones and everything seems to work. Not a killer but would be great: is there a way to get SPen functions inclidung Air Command? Thanks for the help.

BobbyKa said:
I tried the Nordic ones and everything seems to work. Not a killer but would be great: is there a way to get SPen functions inclidung Air Command? Thanks for the help.
Click to expand...
Click to collapse
To use Sammy Spen apps/features you need a Touchwiz based stock rom.
There are some apps with similar features for AOSP roms.
Many users say the best is SPenCommand developed by @emandt. It is paid but users say that the app is well worth the price.
Check the SPenCommand Google+ Comunity.

Great post. I don't see google assistant working, any clue?
Sent from my Pixel using Tapatalk
---------- Post added at 09:22 PM ---------- Previous post was at 09:10 PM ----------
Please ignore, I installed nano gapps and it worked
Sent from my Pixel using Tapatalk

what about battery life ?

has anyone tried this on Sprint Note 3 sm-n900p ?

svbarbosa said:
Check the SPenCommand Google+ Comunity[/URL].
Click to expand...
Click to collapse
I installed SPenCommand but the App doesn't open. When clicking the Icon nothing happens. Anyone knows about this Problem or knows another app for this?
Beside that everything (incl. Batterylife) seems great on this first day of testing.

I have followed your step to instal, wipe dalvik/art, system, data & chache. Flash ROM then reboot.
I got 'Could not do normal boot'.
Enter TWRP again and instal synergy kernel and reboot, I still got 'Could not do normal boot'.
My phone:
Samsung Galaxy Note 3 SM-N900S (Korea)
TWRP 2.8.7.0 hlteskt
CP N900SKSU0GPC5
BL N900SKSU0GPB1
sent from my Galaxy Note 3 using XDA Labs

BobbyKa said:
I installed SPenCommand but the App doesn't open. When clicking the Icon nothing happens. Anyone knows about this Problem or knows another app for this?
Beside that everything (incl. Batterylife) seems great on this first day of testing.
Click to expand...
Click to collapse
I have never used SPenCommand myself. Just read good things about it many times in other threads. Try to search and get help from people who are using it.
You may also check these apps: Note Buddy (S Pen Helper) and CM S Pen Add-on(ROOT).
And this guide on them: The Ultimate S Pen Customization Tool for Your Galaxy Note 3.
But be advised that I have no experience using these apps. Just found them using google.
opexblue said:
I have followed your step to instal, wipe dalvik/art, system, data & chache. Flash ROM then reboot.
I got 'Could not do normal boot'.
Enter TWRP again and instal synergy kernel and reboot, I still got 'Could not do normal boot'.
My phone:
Samsung Galaxy Note 3 SM-N900S (Korea)
TWRP 2.8.7.0 hlteskt
CP N900SKSU0GPC5
BL N900SKSU0GPB1
sent from my Galaxy Note 3 using XDA Labs
Click to expand...
Click to collapse
Sorry I can not be of help here. I only have the hlte N9005 international Note 3.
Maybe you could replace Synergy RC9 by a kernel that you are sure works with your N900S.

svbarbosa said:
Sorry I can not be of help here. I only have the hlte N9005 international Note 3.
Maybe you could replace Synergy RC9 by a kernel that you are sure works with your N900S.
Click to expand...
Click to collapse
Thank you for fast response. I will try other kernel.

[ROM] Oreo test builds

Alright, after way too long, I've finally gotten oreo working well enough to test. Please note:
These are beta quality, not suitable for daily usage yet.
Known issues will be listed. Anything not listed should work (but not everything has been tested).
Tested with opengapps micro arm64 8.1.
If you would like to test nougat upgrades, please let me know how that goes. I have only done a clean install so far. Keep in mind that you will need to flash oreo gapps, as gapps persistence does not work across versions.
Sources
Device
Kernel
Vendor
Prerequisites
All oreo builds require an updated TWRP to flash:
tulip-twrp-7.1-3.2.3-r2.img
Build 2018-10-12
Known issues:
SELinux is permissive.
Bluetooth MAC address is bogus.
AOKP Oreo:
aokp_tulip_oreo_UNOFFICIAL_2018-10-12.zip
MD5: 53946f9c4ae8833b91a324bd824d7b8a
Lineage Oreo:
lineage_tulip_oreo_UNOFFICIAL_2018-10-12.zip
MD5: ee2596eb998994714f20fc90f2968190
Build 2018-10-11
Known issues:
Camera does not work (black preview, will not take pics).
SELinux is permissive.
Bluetooth MAC address is bogus.
AOKP Oreo:
aokp_tulip_oreo_UNOFFICIAL_2018-10-11.zip
MD5: 2d94e29de8e1cec4d63f6bb7a6c8c054
Lineage Oreo:
lineage_tulip_oreo_UNOFFICIAL_2018-10-11.zip
MD5: 46c31ef9585b5f43c0096508f3d5a9ca
Build 2018-10-10
Known issues:
Camera does not work (black preview, will not take pics).
Fingerprint sensor not functional.
Battery charging LED not working.
SELinux is permissive.
Bluetooth MAC address is bogus.
AOKP Oreo:
aokp_tulip_oreo_UNOFFICIAL_2018-10-10.zip
MD5: d18580e66fc8e1a3282b97f4e8fff965
Lineage Oreo:
lineage_tulip_oreo_UNOFFICIAL_2018-10-10.zip
MD5: 45a4bea38fa6fd75497a756e5342cea9

Thank you very much for your work!
Will test the upgrade from 14.1 with LOS Version as soon as available.

you da man - will test

Thank you....I tought this phone was dead
Thank you....I tought this phone was completly forgeten, and that´s such a pitty as it is such a good phone

I am very glad to finally see a test build... I have been waiting forever. I am definitely going to test this out and give you some feedback! I already know the fingerprint sensor is going to be a downside for me as everybody in my house likes to look at me typing my pin lol. But, anyways I am greatly appreciative of you finally releasing a test build. Thank you.

Thank you sir!!

Updated TWRP (3.2.3-0): Doesn't recognize external microSD card
tdm said:
Alright, after way too long, I've finally gotten oreo working well enough to test.
Prerequisites
All oreo builds require an updated TWRP to flash:
tulip-twrp-7.1-3.2.3-r1.img
Click to expand...
Click to collapse
Hi tdm. I flashed the updated TWRP (3.2.3-0) but when I try to backup the partitions (system, boot, data, cache) the recovery only recognizes the internal storage but it doesn't recognize the external microSD card (which has a bigger storage size). I am attaching some "screenshots".
Thanks in advance.
Regards

LeonardoGC said:
Hi tdm. I flashed the updated TWRP (3.2.3-0) but when I try to backup the partitions (system, boot, data, cache) the recovery only recognizes the internal storage but it doesn't recognize the external microSD card (which has a bigger storage size). I am attaching some "screenshots".
Thanks in advance.
Regards
Click to expand...
Click to collapse
Okay thanks I'll look into it Monday. In the mean time use internal storage or side load.

Here is a list of bugs!
You may already be aware
I know this is Beta and you are still working on it.
[TWRP BUGS AS OF NOW]​
- Not Recognizing External SD Card [Fixed As Of 10/09/2018]
- It Says That Gapps Is Already Installed Onto The System... But, It Still Flashes Gapps Regularly
[Not Sure If This Is A TWRP Bug Or System Bug... So, I Will Put It In Both Bug Lists!]
[BUGS AS OF NOW] (My Testing)​
- Privacy Guard (system installed root), Magisk, and SuperSU do not work, encrypts device every time.
- If you click the home button and then click square (recent apps) button and click the app you just closed out of, it crashes SystemUI and then when you unlock the phone again it will be back in the app but... You are stuck in there no matter how many times you click the home button... stuck! (Just click recent apps (square button) crash the SystemUI and you will be out!) [Fixed As Of 10/09/2018] [tdm's Local Sources Were Out Of Sync!]
- It Says That Gapps Is Already Installed Onto The System... But, It Still Flashes Gapps Regularly
[Not Sure If This Is A TWRP Bug Or System Bug... So, I Will Put It In Both Bug Lists!]
- If you go to recent apps inside of any app it crashes SystemUI (Recent Apps Meaning Square Button On Navbar) [Fixed As Of 10/09/2018] [tdm's local sources were out of sync!]
- First boot and every reboot, Device Fingerprint mismatch [Fixed As Of 10/09/2018] [tdm's local sources were out of sync!]
- No Charging Notification Light! (Not really a bug... Just not yet implemented... I think!) [Fixed As Of 10/11/2018]
- In the settings, it says finish setting up Pixel Device
- Have to repeatedly keep clicking flashlight button for it to turn on! You only need to do this once though. [Fixed As Of 10/09/2018]
- In the slide down quick settings if you hold down the WiFi icon and turn it on... it doesn't really turn on lol (Not To Be Petty!) [Irrelevant As WiFi Is Working!]
[End Of Bug List]​
Other than that it is pretty great... the navbar vibrations feel really nice
The settings look amazing compared to 7.0
The Power Off and Restart Menu... Just Beautiful!

NewbieGamingYT said:
I was literally just about to post the same exact thing. Luckily I have a computer... and I didn't want to redownload so I flashed the old TWRP and copied AOKP Oreo and Gapps and Magisk onto my pc and then installed the new TWRP and copied them onto the internal storage and flashed that way... But, it does suck for users without a PC.
---------- Post added at 07:55 AM ---------- Previous post was at 07:53 AM ----------
Just noticed this when flashing Gapps... it says that Gapps is already installed onto the system... But, it still flashes Gapps regularly.
---------- Post added at 08:10 AM ---------- Previous post was at 07:55 AM ----------
Here is a list of bugs after 5 minutes
You may already be aware
I know this is Beta and you are still working on it.
- WiFi doesn't work which wasn't mentioned above.
- If you go to recent apps inside of any app it crashes SystemUI (Recent Apps Meaning Square Button On Navbar)
- First boot, Device Fingerprint mismatch
- In the settings, it says finish setting up Pixel Device
- Have to repeatedly keep clicking flashlight button for it to turn on! You only need to do this once though.
- In the slide down quick settings if you hold down the WiFi icon and turn it on... it doesn't really turn on lol (Not To Be Petty!)
Other than that it is pretty great... the navbar vibrations feel really nice
The settings look amazing compared to 7.0
I can't really do much without WiFi though!
The Power Off and Restart Menu... Just Beautiful!
Going back to AOKP 7.1 until an update is released... all-in-all really great so far!
Click to expand...
Click to collapse
That's odd. WiFi should work and the recents button should also work. I'll have to look into that tomorrow. Maybe I screwed up my device sources somehow.

tdm said:
That's odd. WiFi should work and the recents button should also work. I'll have to look into that tomorrow. Maybe I screwed up my device sources somehow.
Click to expand...
Click to collapse
The exact mismatch it says on first boot is:
Title: Android System
(It Doesn't Say Title or Details!)
Details: A vendor image mismatch has been detected. Typically this means your vendor image is out of date. Please ensure your vendor image matches NMF26V.
OK Button.
---------- Post added at 10:57 PM ---------- Previous post was at 10:54 PM ----------
tdm said:
That's odd. WiFi should work and the recents button should also work. I'll have to look into that tomorrow. Maybe I screwed up my device sources somehow.
Click to expand...
Click to collapse
Also, after re-installing AOKP 8.1 a second time the WiFi seems to be working... maybe just a bug there!

tdm said:
Recents button should also work. I'll have to look into that tomorrow.
Click to expand...
Click to collapse
The recents button works fine... as long as you are not in a app... If you click it inside of a app it crashes the SystemUI!

report errors with logcat please
Enviado desde mi K88 mediante Tapatalk

juniorgerman said:
report errors with logcat please
Enviado desde mi K88 mediante Tapatalk
Click to expand...
Click to collapse
Don't even know what that is!

Guide:https://wiki.lineageos.org/logcat.html
NewbieGamingYT said:
Don't even know what that is!
Click to expand...
Click to collapse
Enviado desde mi K88 mediante Tapatalk

There is my logcat and radio.

Backup to PC and ADB not working on updated TWRP
LeonardoGC said:
Hi tdm. I flashed the updated TWRP (3.2.3-0) but when I try to backup the partitions (system, boot, data, cache) the recovery only recognizes the internal storage but it doesn't recognize the external microSD card (which has a bigger storage size). I am attaching some "screenshots".
Thanks in advance.
Regards
Click to expand...
Click to collapse
I usually make backups using the external microSD card, so the problem mentioned above stopped me temporarily. I didn´t know how to do a backup to the PC but I investigated. If someone else wants to know how to make/restore a backup to/from the PC here is the procedure:
You need to have installed ADB on your PC.
You need to enter in recovery mode and connect the phone to PC with the USB cable.
There are two backup & restore commands: adb backup --twrp / adb restore filename.ab
Enter the one you need in the command prompt.
In the command prompt a message will tell you to unlock the device and swype to confirm the backup/restore action.
@tdm It looks like in the updated TWRP there is no connection with ADB. When I tried to make a backup with the "adb backup --twrp" command I got the following message:
adb: unable to connect for backup: no devices/emulators found​
Also the result of the "adb devices" command is an empty list where there should be a device or devices.
Finally (this probable is only informational) after ejecting (on Windows) the "USB device" (the phone) I get this string inside the message:
Device "Google Nexus ADB Interface"​
Regards

I got several of the issues fixed today:
* sdcard in twrp.
* recents crashing systemui.
* vendor mismatch warning.
The last two had already been fixed, but my local sources were out of sync.
I'll do another build tomorrow with the above.
Worked on fingerprint sensor most of the day today. It's proving to be a major pain, just like the camera.

tdm said:
I got several of the issues fixed today:
I'll do another build tomorrow with the above.
Click to expand...
Click to collapse
Dang, I was hoping you would do a build today! I've really been itching for some Oreo!

New builds are up.
TWRP r2 has the sdcard fix. Note that I've been building with toybox instead of busybox. This seems to work fine, except for one thing: gapps install and persistence requires data to be decrypted because it wants access to /data/local/tmp for temp files. I'll look into this and either fix it or switch back to busybox.
AOKP and Lineage 10/10 have both been uploaded. Recents button should work and vendor mismatch should be gone. I'm continuing to work on camera and fingerprint sensor.
Enjoy!

[ROM][UNOFFICIAL][9.0.0] LineageOS 16.0 [BETA][16.04.2020] for i9305

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an unofficial Pie build for the S3 LTE (i9305) based on LineageOS 16.0.
!! Please note that all thanks and credits go to @ChronoMonochrome because he ported the necessary changes to t0lte and got Pie to work for that device, especially the kernel thingis!!​
And below is a quote from his release, where he mentioned in his t0lte thread all the involved devs and credited to all the people helped to get pie running for our "old" devices.
This work is heavily based on works of PoisonNinja, Option58 (thanks for device tree, kernel and device patches for LOS 14.1).
A full credit for Pie bringup goes to rINanDO (thanks for device tree, kernel and device patches for LOS 16.0).
Click to expand...
Click to collapse
Working
Graphics
Wifi
Data (LTE is not supported currently)
RIL
Bluetooth (needs more testing, receiving files is working, sending I am not sure, also device name needs a change)
Sensors (needs more testing, proximity sensor works, others not sure whether it work)
Vibration
Camera (advanced settings not working switched to snap cam and its working now)
Audio
LED Notification, color and brightness settings
Pico Gapps are working, Youtube and Google Films are well
livedisplay
etc
Not tested, needs testing
Call recording, call forwarding and else
NFC (needs more testing, not sure whether it work)
GPS (got a fix with gps status, first fix lasts a minute, nexts are much faster) currently getting worse, have no fixes 14/03/20
Bugs
feel free to report them, will try to find a solution, but no promise
Download:
ROM
TWRP
Root
Installation:
I am using an older TWRP, which is working fine: TWRP_2.8.7.0_alpha17_by-SdtBarbarossa_i9305.zip
Download the latest build and copy it to the phone
Factory reset in TWRP (Very important! Do not skip)
Wipe cache, Data, System and Dalvik in TWRP advanced (Very important! Do not skip)
Flash LineageOS 16.0
Optional: Flash gapps and root package
Reboot
Be patient. The first boot will take between 5 - 15 minutes.
Enjoy and have fun
Credits:
rINanDO
forkbomb444
Option58
PoisonNinja
AdrianDC
A$teroid
Lord Boeffla
LineageOS team
Nameless ROM
If I miss someone, please PM or post here, and I will add you
Source code: LOS 16.0
XDA:DevDB Information
LineageOS 16.0, ROM for the Samsung S3 LTE (i9305)
Contributors
rodman01, ChronoMonochrome, rINanDO, Option58, PoisonNinja, LineageOS team
Source Code: https://github.com/CustomROMs/android_local_manifests_i9300/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.0.x
ROM Firmware Required: TWRP_2.8.7.0_alpha17 or newer
Version Information
Status: Beta
Created 2020-01-15
Last Updated 2020-04-16

reserved
if I need one

reserved
maybe another one needed?

nice job dev @rodman01
Well done

Hi, thanks for your great job!
Almost features are fine. I recognized only two stuffs for now.
** 1) phone call **
I set up a VoIP phone app on a phone which was flashed this rom, and called another phone.
The echo back is heard on the VoIP app side, but I could not hear the voice I talked on the receiving phone.
Do you think above phenomenon is related your attention "Call recording, call forwarding and else" or not?
2) FTU was appeared a few times
When I started using this rom, FTU appeared twice or more after I went through FTU.
But as for now I don't see FTU anymore. Thus, this is a trivial issue.
Anyway, I am looking forward to seeing the next updated version!

small update
Hi There,
gapps pico are working, but graphical glitches are occurring in youtube app, youtube browser is working fine, google films is working fine.
Bluetooth sending and receiving is working, device name is still wrong, shows still Galaxy Note 2, which does not matter and can be changed in settings manually.
Download
lineage-16.0-20200118-UNOFFICIAL-i9305_rodman01.zip https://www.androidfilehost.com/?fid=4349826312261704972

phone call problem was solved! thanks!! :good: :laugh:

super
Fantastic . I will keep an eyes to this.
thank you so much !

trying the rom
What file should I download from the root link ?

new build is up: 20200122
Hi There,
made a new version nd its uploaded now.
Based on yesterday evening leo sources and small update in device source.
- Youtube App is now working and Google films too
No other bigger changes.
And since there are no reports yet about serious problems, I changed the status to from Beta testing to bBeta.
Whats App, Instagram, Facebook and other messengers as well as other social media apps needs testing and would be glad, if someone can report back.
GPS most probably won't work. I am getting no satellites and no fix
Download
lineage-16.0-20200121-UNOFFICIAL-i9305_rodman01.zip: https://androidfilehost.com/?fid=4349826312261708954

Im trying to install this custom rom but everytime I got stuck on LineageOS loading logo forever. Anyone have this problem too?

some problems...
on 20200118 ver.
1) following apps sometimes crashed.
LINE, Adobe photoshop express, Amazon Shopping, Proton Mail.
I felt these apps often crash especially when a first invocation and registering an account to every app via network.
After registered my account, crash frequency decreased.
2) following apps couldn't be installed by Google Play Store
LINE, Google Drive, Google Spreadsheet
* For LINE, I installed older apk manually.
I cannot download 20200121 ver. via AFH yet. I'll test further after the rom is updated.

MagusCoD said:
Im trying to install this custom rom but everytime I got stuck on LineageOS loading logo forever. Anyone have this problem too?
Click to expand...
Click to collapse
Have you wiped out data, cache, and Dalvik cache before install the rom?
If you didn't yet, try it but ALL OF YOUR DATA WILL BE CLEARED!!
Be aware of what you're doing and do everything at your own risk.

I got the same issues .
I keep it stuck there for almost 40 minutes 2 times but it didn't work.

@rodman01
I intend to flash and test the ROM this weekend. However, I've issues to download it as AFH doesn't find any mirror. Do you have another DL available?
Another question: Anything against not to use your given and linked root solution but to use Magisk? As you provide a separate root solution, I assume Magisk is not incorporated into the ROM.

MagusCoD said:
Im trying to install this custom rom but everytime I got stuck on LineageOS loading logo forever. Anyone have this problem too?
Click to expand...
Click to collapse
ximia said:
Have you wiped out data, cache, and Dalvik cache before install the rom?
If you didn't yet, try it but ALL OF YOUR DATA WILL BE CLEARED!!
Be aware of what you're doing and do everything at your own risk.
Click to expand...
Click to collapse
Depending on from which rom you are coming, it could be better to flash an other custom rom first. You can try RR or cm14 and test whether this is working. And if yes, that follow the steps in op for a new and clean installation. It can also depend on the recovery you are using.

ximia said:
I cannot download 20200121 ver. via AFH yet. I'll test further after the rom is updated.
Click to expand...
Click to collapse
Oswald Boelcke said:
@rodman01
I intend to flash and test the ROM this weekend. However, I've issues to download it as AFH doesn't find any mirror. Do you have another DL available?
Another question: Anything against not to use your given and linked root solution but to use Magisk? As you provide a separate root solution, I assume Magisk is not incorporated into the ROM.
Click to expand...
Click to collapse
Sorry for the issues with afh. I will try to fix it with uploading the version again.
@Oswald Boelcke no specific reason why I linked the root to leos. Magisk should work as in previous versions. I tested it a couple of weeks ago with a prototype version and it worked. So its worth to try magisc, yes.

Rom new uploaded, afh should find mirror now. Sorry for circumstances:
lineage-16.0-20200121-UNOFFICIAL-i9305.zip: https://androidfilehost.com/?fid=4349826312261708954

rodman01 said:
Rom new uploaded, afh should find mirror now. Sorry for circumstances:
lineage-16.0-20200121-UNOFFICIAL-i9305.zip: https://androidfilehost.com/?fid=4349826312261708954
Click to expand...
Click to collapse
Affirmative, just downloading. Thanks a lot!

ximia said:
on 20200118 ver.
1) following apps sometimes crashed.
LINE, Adobe photoshop express, Amazon Shopping, Proton Mail.
I felt these apps often crash especially when a first invocation and registering an account to every app via network.
After registered my account, crash frequency decreased.
2) following apps couldn't be installed by Google Play Store
LINE, Google Drive, Google Spreadsheet
* For LINE, I installed older apk manually.
Click to expand...
Click to collapse
I could install all your mentioned apps via google play store. It last a bit, the download is not fast, but worked on my end. Amazon is crashing on my side too, the others not, but I haven't tested them much, because I don't have accounts or ids for for example photoshop express or want to create or share my phone number or personal details.

[GSI][10] Lineage OS 17.0 For Galaxy J6

DICLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
This is still mostly a LineageOS team / PHH @phhusson effort, credits to them and all associated for making all this possible.
No guarantees that everything would work. This is a GSI, bugs are bound to happen.
[GSI][10.0] Lineage OS 17.0 Galaxy J6
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, Gerrit code
Click to expand...
Click to collapse
SO, Here Is The Unofficial Lineage OS 17.0 GSI Working On Galaxy J6.
Follow The Instructions To Flash It .
REQUIREMENTS/DOWNLOADS :
Unlocked Bootloader
TWRP Installed
GSI Image : DOWNLOAD
10.0 j6 Vendor : DOWNLOAD
Flashing Instructions
[*]Unzip Downloaded GSI Image , You Got an .img file
[*]Boot In TWRP
[*]Wipe system, data, dalvik&cache, cache
[*]Install Vendor.Zip file
[*]Reboot To Recovery
[*]Select Install Image Option In TWRP
[*]Install extracted Image File
[*]Again Reboot To Recover (Don't worry if no OS installed error comes just go ahead )
[*]Now, At last reboot to System
[*]OPTIONAL : Flash Gapps (DOWNLOAD) After first Boot (It Takes Around 10min For First Boot )
SCREENSHOTS
https://ibb.co/CsLdW2k
https://ibb.co/mFFPMv3
https://ibb.co/8smXSqM
https://ibb.co/MRX7sQr
https://ibb.co/f9SDK0n
https://ibb.co/YtHrsXp
video tutorial :
https://youtu.be/Zz-VZ9sXlX0
creditsAndyYan
Sent from my J6 using XDA-Developers Legacy app

Ok so I have a bug while using this rom(j600fn). Except from the casual sim calls, I also get this even in apps,for example messenger. The problem occurs not all times, but it's not rare, someone calls me, I pick it up and I can hear them but they can't hear me. After they hung up and call me again everything works fine. Any piece of advice? Thanks for reading and also thanks for keeping the j6 alive.

Kostas172 said:
Ok so I have a bug while using this rom(j600fn). Except from the casual sim calls, I also get this even in apps,for example messenger. The problem occurs not all times, but it's not rare, someone calls me, I pick it up and I can hear them but they can't hear me. After they hung up and call me again everything works fine. Any piece of advice? Thanks for reading and also thanks for keeping the j6 alive.
Click to expand...
Click to collapse
Hi @Kostas172
Thats a bug,no solutions till now .wait for next build.
Sent from my [device_name] using XDA-Developers Legacy app

This is from telegram right ? Nice kang man

Help
Can this be installed on 32bit one ui? Asking this because i saw many arm64 gsi where it said not to install on 32bit one ui

some things that i can relate and maybe will help you with debbuging
!!this was meant to be posted on reddit but lineage community is all sicko about unofficial builds!!
model: Samsung Galaxy J6 (j600GT/DS) 64GB 3G
Let's get started:
IMGUR link: imgur. com /gallery/E76ffQF
Camera issues:
1- video streches and morphes as i turn the camera (SOLVED: downscale video settings to 720p)
2- recorded video file corrupted (3 seconds video turn into 30sec video with just a static image and sound) (FIXED: install camera2api module with magisk)
Calling/Broadband issues:
3- LTE/phone signal too low, sometimes NO SIGNAL
4- Calls don't work in loudspeaker mode
Battery issues:
5- Battery takes hella time to charge (2 hours in ONE UI, and in LOS i plug the phone, go to sleep, and wake up in the next day in 80-90% [still charging]. Comparison made with a non-turbo charger, starting at 15%)
6- Battery drains hella fast, i need to keep my phone in Battery Saving mode to make it last almost to the end of the day (on ONE UI it last until midnight with 10% left) (i also tried deactivating the AOD, but it is not what is consuming all of the battery). (ammenized by turning off AOD)
Play store issues (it's more of a question):
7- some apps (like netflix) count as "This app is not compatible with your device", is that because of the security of lineage not being approved by google?
i also have some questions on things as:
q1- does lineage have a app like samsung's theme store? and can you customize the AOD?
q2- will i receive normal updates as i'm using an UNOFFICIAL release?
EDIT 1:
-whatsapp video call gets all black, but the video is rolling on the other user's phone

I have a fairly serious bug every 20/30 minutes the device restarts me on my own. is there a solution?

henks99 said:
I have a fairly serious bug every 20/30 minutes the device restarts me on my own. is there a solution?
Click to expand...
Click to collapse
Yes, get a new ROM and kernel.

The rom is very wonderful ... Thank you very much ...

henks99 said:
I have a fairly serious bug every 20/30 minutes the device restarts me on my own. is there a solution?
Click to expand...
Click to collapse
From recovery. Wipe Cache and Dalvik Cache..
If problem Still Exists..
Reinstall rom...
Sent from my [device_name] using XDA-Developers Legacy app

Is work samsung pass with root?

Its support VOLTE ?

Well,
I gave it a fair shot. Had trouble getting superuser, untill I read somewhere that Magisk is breaking things like adb. Also some other functions apparently... So SuperUser it was..
However... things happened that made me revert to the previous version:
- The device reboots regularly, like twice an hour.
- LastPass refuses to start...
- Battery drain
- File Transfer over USB (mtp) is broken
pity...

FreakyJoost said:
Well,
I gave it a fair shot. Had trouble getting superuser, untill I read somewhere that Magisk is breaking things like adb. Also some other functions apparently... So SuperUser it was..
However... things happened that made me revert to the previous version:
- The device reboots regularly, like twice an hour.
- LastPass refuses to start...
- Battery drain
- File Transfer over USB (mtp) is broken
pity...
Click to expand...
Click to collapse
well, it took me a few nights but i found the problem.
so basically, when you flash the vendor file it flashes magisk 20.X
but the rom has it's own su built in!
so magisk and the phh su fight and cause random reboots.
this is the procedure to fix the issue:
1. open adb
2. type "adb shell"
3. type "su 0"
4. type "/system/bin/phh-securize.sh"
5. download magisk 22 apk, and rename it to be a zip file(just change the .apk to .zip at the end)
6. flash it in twrp
7. rename the zip to apk and install it, or just download it again and install it.
8. you're done!
i got mine to work perfectly after that. no battery drain(except for AOD), mtp started working again and all the problems were fixed.
please let me know if it had worked out to you!

Well, been a long time now... Good to hear someone did find a solution.
I never read this until now, and I got a different phone now.
But hey, maybe I'll give it a try once I find some spare hobby-time. I still have the device.
Cheers on you for making it work!