Related
Hi Guys
I am trying to get SuperCID, S-Off, then --> 3.18RUU and TWRP2.6.0.0 --> CM10.1 or 10.2
I have a phone that i Unlocked bootloader on HTCDev a long time ago. Rooted, TWRP2.6.0.0 running CM10.1 but because newer kernels require newer HBOOT so i am trying to get it.
I have TELST001 as CID
the phone in bootloader shows
****TAMPERED*****
****UNLOCKED****
EVITA PVT SHIP S-On RL
HBOOT-1.09.0000
Radio 0.20os.32.09.15
OpenDSP-V251.0.32.0405
eMMC-boot
Apr 2 2012,, 21:08:24
i have tried fastboot oem writecid 11111111 comes up with failed
I have also tried the oneclick SuperSID http://forum.xda-developers.com/showthread.php?t=1952038 - didn't work
any ideas whats the best step to take to get to the elusive cm10.2?
Thank you for your help!
You can try the hex edit method, which can be found here:
http://forum.xda-developers.com/showthread.php?t=2212737
Sent from my Evita
timmaaa said:
You can try the hex edit method, which can be found here:
http://forum.xda-developers.com/showthread.php?t=2212737
Sent from my Evita
Click to expand...
Click to collapse
This should work too:
Code:
adb shell
su
echo -ne "11111111" | dd of=/dev/block/mmcblk0p5 bs=1 seek=20
Once you get Super CID, you can get S-Off using the method found here: http://forum.xda-developers.com/showthread.php?t=2155071
which worked wonderfully for me just this morning.
Then, once you've verified that you have S-Off, you can update your HBoot using this method: http://forum.xda-developers.com/showthread.php?t=2156686
I used the third zip listed, worked just fine.
If you do not have S-Off and you attempt this, the chance of bricking your phone is incredibly high.
When you get to green bar, as mentioned in the instructions, let it sit for a few seconds, and then move on to the next step without waiting for it to go away (because it won't...).
Once you're done with that, I would clear the cache using <fastboot erase cache>, flash your recovery software using <fastboot flash recovery "recovery software name here"> and then boot to that to flash your rom.
As I said, I just did this all this morning, and I'm happily running a rom that requires the updated HBoot. So best of luck!:good:
That's not entirely correct. It's not just the hboot you're meant to update. You really should run an RUU.
Sent from my Evita
Thank you all!
I have successfully superCID and S-Off then RUUed to the latest 3.18
now it says
*Unlocked*
EVITA PVT SHIP S-OFF RL
CID 11111111
HBoot 2.14.0000
Radio 0.24p.32.09.06
open DSP v34.1.0.45.1219
eMMC-Boot
Nov 26 2012 18:37:14:-1
but when i go into recovery it gives me a big exclamation mark
so presumably the TWRP is gone
So i used goomanager to install. that didn't work.
there's no root (after RUU) presumably normal
what is the best way to get TWRP on, then flash latest CM10.1
Many thanks for your help!
Download twrp and flash in fastboot.
Fastboot flash recovery recoveryfilename.img
Sent from my HTC One X using xda app-developers app
exad said:
Download twrp and flash in fastboot.
Fastboot flash recovery recoveryfilename.img
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Legendary.
Worked like a charm.
on latest CM10.1 nightly now.
Appreciate all of the above help!
Hello everyone..I would like to see if someone could help me..I have a one x with supercid, s-off, and bootloader unlocked..I want to flash a custom Rom like viper but wouldn't know where to start..would I ruu 3.18 or relock bootloader? Any help will be appreciated.
Sent from my HTC One X
xViiZe said:
Hello everyone..I would like to see if someone could help me..I have a one x with supercid, s-off, and bootloader unlocked..I want to flash a custom Rom like viper but wouldn't know where to start..would I ruu 3.18 or relock bootloader? Any help will be appreciated.
Sent from my HTC One X
Click to expand...
Click to collapse
All you need to do is flash the ROM from recovery....
Sent from my Evita
Ok so the hboot version wouldn't matter? I have ics 2.20 hboot 2.14. And viper xl is jb.
Sent from my HTC One X
No it doesn't matter.
Sent from my Evita
Alright thank you ..I appreciate it
Sent from my HTC One X
---------- Post added at 11:26 PM ---------- Previous post was at 11:08 PM ----------
ohh im sorry i was about to install the rom but then i checked my hboot version and it is 1.14 ..i read in a couple of threads that with 1.14 u need to install the boot img with the rom is this true? or would i need a hboot upgrade?
No, you're s-off so you don't need to do that.
Sent from my Evita
Ok let me try and I'll post results when I'm done
Sent from my HTC One X
So I flashed it and it did boot..thank you. So from now on if i would like to flash a different Rom, I would just got to twrp again right?
Sent from my HTC One X using xda app-developers app
xViiZe said:
So I flashed it and it did boot..thank you. So from now on if i would like to flash a different Rom, I would just got to twrp again right?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Correct
Sent from my HTC One XL using xda premium
Yeah just boot into TWRP, do a full wipe (cache/dalvik cache/system/factory reset), and flash your ROM (and gapps if it's an aosp ROM).
Sent from my Evita
Ok thank you guys..
Sent from my HTC One X using xda app-developers app
Heisenberg said:
Yeah just boot into TWRP, do a full wipe (cache/dalvik cache/system/factory reset), and flash your ROM (and gapps if it's an aosp ROM).
Click to expand...
Click to collapse
I accidentally flashed a ruu you while my phone was super CID. Now it won't boot. Is there a way that I could force my phone into fastboot? That is without having to do a j tag on it
I have a phone that I got which was locked to Telus, the root was messed up. I want to flash a RUU so I can update to the latest OS. I get that "developer red text" with the HTC logo in recovery.
- RUU_Evita_UL_TELUS_WWE_1.91.661.4_Radio_0.18a.32.09.01_2_10.94.32.20L_release_266645_signed.exe
is that the correct file?
What it says on my phone:
***TAMPERED***
***RELOCKED***
***Security Warning***
Evita PVT SHIP S-ON RL
HBOOT-1.11.0000
RADIO-0.18a 32.09.01_2
OpenDSP-v28.1.0.32.0504
eMMC-boot
Jun 7 2012,13:10:34
fastboot getvar version-main
version-main: 1.91.661.4
finished. total time: 0.000s
Also since my phone is on Fido(I got a sim unlock) I get no data. Could I flash to a Rogers RUU? Because Rogers and Fido are literally the same company, I got Rogers connection all the time on my iPhone. Would this work or would it mess everything up?
- RUU_Evita_UL_Rogers_WWE_1.94.631.3_Radio_0.18as.32.09.28L_10.103.32.24L_release_268972_signed.exe
Thanks
Those "tampered"and "unlocked" messages in bootloader are completely normal. That means you can now flash a custom recovery, and then from that recovery you can flash a custom ROM.
If you want to RUU for some reason, you'll probably want to s-off first. If you have SuperCID and are s-on, running an RUU could brick your phone.
Sent from my Evita
My phone isn't rooted, I tried to flash a recovery file but that's when it messed up. I get the HTC logo and red text that says "This build is for development purposes only do not distribute outside of HTC without HTC's permission".
I cant get to the CWM from recovery. I also cant upgrade my OS from the phone itself I get that red text error and its just frozen there until I reboot the phone.
I relocked the bootloader and it now has a security warning thing.
***TAMPERED***
***RELOCKED***
***Security Warning***
Evita PVT SHIP S-ON RL
HBOOT-1.11.0000
RADIO-0.18a 32.09.01_2
OpenDSP-v28.1.0.32.0504
eMMC-boot
Jun 7 2012,13:10:34
edit.
The security warning thing went away now but I ran:
fastboot getvar cid
and got cid: TELUS001
Could I flash the Telus RUU now? Also if I got SuperCID and S-Off could I flash the Rogers RUU? Would that even give me data back?
Your CID is fine, and because you have relocked your bootloader you should be ok to run the RUU.
Have you triple checked that your apn settings are correct? That's usually the cause of a loss of data.
Sent from my Evita
No I didn't set that up yet haha that would be the reason why. Just did and it works now!
I'm going to wait for my phone to charge up some more before it run the RUU. Hopefully all goes well, and I can actually get my device properly rooted..
Thank you for your help
Running the RUU won't really help the rooting process. You could just unlock your bootloader again and flash a recovery. Just make sure it's a recovery for this device (Evita) because that may be where you went wrong in the first place.
Sent from my Evita
Alright I downloaded the HTC One X(evita) All-In-One Toolkit
I will follow the steps on there
Do I have to do the Xfactor and MotoChopper steps?
Do you still have the unlock.bin from when you unlocked your phone the first time? It should still work.
Sent from my Evita
Yes I still have the email from HTC and I made a backup of the file as well
I just used that toolkit and went right to the unlock bootloader.
In the bootloader it is now
***Tampered***
***Unlocked***
I flashed TWRP 2.5.0.0 and put the SU files in my main directory
Worked!! Flashed the SU file and phone booted up properly now
You should be able to use it again to unlock your bootloader. Just go back to htcdev and do the last part where you enter the unlock.bin.
Then I recommend flashing TWRP 2.6 recovery from here.
Sent from my Evita
Should I just reflash 2.6 instead then? Do I have to remove anything or can I just flash over top?
Also I'm on 4.0.3 should I update the OS and then flash 2.6?
You can't flash TWRP until you've unlocked your bootloader, so do that first. Then flash TWRP by using the following fastboot commands:
fastboot flash recovery openrecovery-twrp-2.6.0.0-evita.img
fastboot erase cache
fastboot reboot-bootloader
Now you can either flash a superuser zip to have root on the stock ROM. Or you can flash a custom ROM.
Sent from my Evita
I got it all to work using the toolkit. I have superuser on my phone now. But I used the 2.5.0.0 file instead.
Do you think its wiser to update my OS and then reflash to 2.6.0.0?
You don't need to update the os, you can flash any ROM you like once you have the correct recovery installed. Just make sure you flash TWRP 2.6, because 2.5 has major bugs.
Sent from my Evita
Alright I flashed 2.6.0.0 now. Is there any custom ROM you would recommend?
Should I run the S-off commands in the toolkit before I flash the custom ROM?
It's against the rules to ask which ROM is best/most stable etc, so it's against the rules for me to answer something like that.
But...
If you're looking for a Sense based rom, look in Android Development section, there you'll find MagioRom (Sense 5), or if you want Sense 4 there's ViperXL, RageXL, and others.
If you're looking for a stock android/aosp ROM, look in Original Android Development. There's a whole bunch of great ROMs in that section, like Cyanogenmod, AOKP, Carbon, Rootbox, Slimbean, etc.
Have a look in the OP (first post) for each ROM, that'll tell you if there are any bugs and a basic rundown of the features, and any requirements you may have to fulfill for the ROM to work. Just find one that suits you best, and if it doesn't, you can just flash another.
Sent from my Evita
I guess I will give this one a shot.
http://forum.xda-developers.com/showthread.php?t=2061881
I need to update my HBoot, SuperCID and S-off before I attempt?
Yes I believe that's right. First SuperCID, then s-off, then RUU. Once you've done the RUU, you'll need to reflash TWRP again.
Sent from my Evita
Could you point me in the direction of the RUU file?
You'll find a list of RUU's on this thread:
http://forum.xda-developers.com/showthread.php?t=
Keep in mind you need to upgrade to at least 3.17 or 3.18.
Sent from my Evita
---------- Post added at 11:15 PM ---------- Previous post was at 11:14 PM ----------
Also, this thread is an awesome list of resources:
http://forum.xda-developers.com/showthread.php?t=1671237
Sent from my Evita
I have an HTC One X from AT&T. I recently got root and started playing. I flashed Clean Rom 6.5 using clockwordmod and it went well. Used it about a week and got bored. (Later I saw that TWRP was needed for that.) I decided I wanted to try a Cyanogen Mod but realized later after research that my phone received the OTA update that only allows Sense ROMS on my phone. After I flashed Cyanogen 10 with clockwordmod the touch screen wouldn't work. I tried to get back to Clean Rom 6.5 and tied to flash TWRP as my bootloader. It went bad from there. Now I cannot get to recovery. It appeas I don't have a bootloader flashed. I used FastbootFlasher_V2.4 and flashed TWRP. It said it was sent. Still won't go to recovery. I downloaded the RUU.exe and tried that process. It failed too. After I tried to restore the RUU it said to reboot. I did and then the cyanogen logo came on and hung. I went to fastboot and typed in fastboot erase cache. No help. Here's my screen info if that helps:
****TAMPERD****
****UNLOCKED****
EVITA PVT SHIP S-ON RL
HBOOT- 2.14.0000
RADIO- 0.24p.32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Vov 26 2012, 18:37:14:-1
Is it bricked??
marcadams67 said:
I have an HTC One X from AT&T. I recently got root and started playing. I flashed Clean Rom 6.5 using clockwordmod and it went well. Used it about a week and got bored. (Later I saw that TWRP was needed for that.) I decided I wanted to try a Cyanogen Mod but realized later after research that my phone received the OTA update that only allows Sense ROMS on my phone. After I flashed Cyanogen 10 with clockwordmod the touch screen wouldn't work. I tried to get back to Clean Rom 6.5 and tied to flash TWRP as my bootloader. It went bad from there. Now I cannot get to recovery. It appeas I don't have a bootloader flashed. I used FastbootFlasher_V2.4 and flashed TWRP. It said it was sent. Still won't go to recovery. I downloaded the RUU.exe and tried that process. It failed too. After I tried to restore the RUU it said to reboot. I did and then the cyanogen logo came on and hung. I went to fastboot and typed in fastboot erase cache. No help. Here's my screen info if that helps:
****TAMPERD****
****UNLOCKED****
EVITA PVT SHIP S-ON RL
HBOOT- 2.14.0000
RADIO- 0.24p.32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Vov 26 2012, 18:37:14:-1
Is it bricked??
Click to expand...
Click to collapse
Slow up.... What if anything can you access on phone? Can you access hboot
Power on + volume down
Being your s-on it's near impossible to kill the bootloader
Sent from my HTC One XL using xda premium
You've given us your bootloader info so I doubt you've killed the bootloader. If it turns on it's far from bricked. Did you mean you can't get into recovery? Have you tried flashing a recovery to fix it?
Sent from my Evita
timmaaa said:
You've given us your bootloader info so I doubt you've killed the bootloader. If it turns on it's far from bricked. Did you mean you can't get into recovery? Have you tried flashing a recovery to fix it?
Sent from my Evita
Click to expand...
Click to collapse
Didn't make much sense and he hasn't been back maybe he relaxed and got it running lol
Sent from my HTC One XL using xda premium
Either that or he ran over it with his truck and claimed insurance
Sent from my Evita
Sorry I got it working again.
timmaaa said:
Either that or he ran over it with his truck and claimed insurance
Sent from my Evita
Click to expand...
Click to collapse
I got it back later that night. Sorry I didn't respond, had a panic attack and did some reading. You guys rock!
Thanks for the reply guys.
I got it later that evening. I'm sure I'll need help in the future. Thanks again,
first thing, sorry for my bad english
I have my att hox from an order version from 1.17 or something like that. i tried to upgrade my hboot by ruu but i got an error 158 image error right at the process of updating signature (relocked my bootloader). Then i tried to s-off by using the facepalm method but no luck.
I'm trying to install android revolution hd 31.0 but i got stuck at 30% or the older 22.0 at 30% as well and viperxl 3.8.0 final so im using 3.28 viperxl and cyn 10.1
I downloaded the RUU 3.18(cingular) directly from htc webside
Evita PVT SHIP S-ON RL
HBOOT-2.14.0000
RADIO-0.24p.32.09.06
OpenDSP-v31.1.0.45.0815
eMMC-boot
cid is 11111111
any help will be greatly appreciated!!!
Flash twrp 2.6 (make sure for evita)
Wipe everything except SD card
Flash any sense rom for evita
Soff
Ruu
Sent from my One X using xda app-developers app
thanks for fast reply!!!
Im gonna try it now
You mentioned trying to install Android Revolution, don't do that, it's not for our phone. You need to stay in this device forum that you're posting in or you'll flash something that'll brick your phone.
Sent from my Evita
oh i didnt know that
Somehow i cant use adb on sense rom, only with cyn
i tried a few times already but still s-on no matter what.
What happens?
Sent from my One X using xda app-developers app
I installed the twrp 2.6.0 then tried to install cleanrom and viperxl to s-off but still s-on
I followed the steps n got the same 92 error but still s-on after bott my phone into boot loader
OK.. Paste your cmd so I can see
Sent from my One X using xda app-developers app
Im on viperxl now and i stuck at the adb device offline thing again
tried adb kill/start-server but no luck
phongduong93 said:
Im on viperxl now and i stuck at the adb device offline thing again
tried adb kill/start-server but no luck
Click to expand...
Click to collapse
press and hold power until the phone shuts off then turn it back on and try again.
exad said:
press and hold power until the phone shuts off then turn it back on and try again.
Click to expand...
Click to collapse
still the same, i also tried that with adb kill/start-server
it was working fine with cleanrom after adb kill/start-server
Is HTC sync running? If so make sure it isn't. I remember I had this issue too once.. I can't remember how I fixed it now...
I think I just changed usb ports rebooted the pic and phone etc.
Sent from my One X using xda app-developers app
thanks for the helps i really appreciated but i no longer own the device.
Wrong posts -
quentin2260 said:
Hi !
Your wifi fix (Tesco ION 3.2.0) in the first page doesn't work with my phone because it's S-ON.
How can I flash this fix with my S-ON (its difficult to flash kernel with S-ON) ?
Click to expand...
Click to collapse
Why don't you just get s-off? And what fix are you talking about? Are you posting in the right thread?
Sent from my Evita.
Hi all
through a series of stupid actions, I am now in a position where I have TWRP, no working image and S-on. This all stemmed from an attempt to upgrade to CM10.2. Anyway, a lot of reading has led me to the conclusion that I need to go back to a standard RUU in order to set S-off. The problem is my fastboot is 2.15 and I cannot seem to find an RUU anywhere.
The fastboot screen details are as follows:
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.15.50.05.29
OpenDSP-v31.1.0.45.0015
cMMC boot
Dec 14 2012.17:10:57:-1
If anyone can point me in the right direction for a RUU or a possible way to get S-off through fastboot, I would be eternally grateful. I have already spent around 15 hours trying to sort this out. Needless to say, I have learnt some lessons about reading instructions and making backups.
Regards
Richard
Did you flash boot.img in fastboot? If you didn't, you should try it first before you attempt to do S-OFF. To get S-OFF, I would use Rumrunner.
willi1972 said:
Hi all
through a series of stupid actions, I am now in a position where I have TWRP, no working image and S-on. This all stemmed from an attempt to upgrade to CM10.2. Anyway, a lot of reading has led me to the conclusion that I need to go back to a standard RUU in order to set S-off. The problem is my fastboot is 2.15 and I cannot seem to find an RUU anywhere.
The fastboot screen details are as follows:
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning ***
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.15.50.05.29
OpenDSP-v31.1.0.45.0015
cMMC boot
Dec 14 2012.17:10:57:-1
If anyone can point me in the right direction for a RUU or a possible way to get S-off through fastboot, I would be eternally grateful. I have already spent around 15 hours trying to sort this out. Needless to say, I have learnt some lessons about reading instructions and making backups.
Regards
Richard
Click to expand...
Click to collapse
I don't know why you want to s-off but i think you don't have to. If you have twrp you can mount your sd via twrp to a computer, copy any rom you want to the sd, flash boot.img with fastboot from the rom zip and flash rom via twrp. But you should first unlock your bootloader
Sent from my One S using xda app-developers app
ka_55 said:
I don't know why you want to s-off but i think you don't have to. If you have twrp you can mount your sd via twrp to a computer, copy any rom you want to the sd, flash boot.img with fastboot from the rom zip and flash rom via twrp. But you should first unlock your bootloader
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Thanks both for the replies. I have transferring a boot.img using fastboot, but this just gets me into a never ending boot screen. The boot.img I tried were cm 10.1.2 and then a 10.1.3. I had read that this will not work with S-on, but I am far from an expert. I have tried rumrunner, but this needs adb to work, and from what I gather adb only works when the phone itself is also booted into an OS.
I had tried to get adb working, but I never get any response from adb devices as the phone never gets past the bootloader.
I realise that I don't need S-off to flash a stock ROM, but my problem is that can't find a stock ROM for a 2,15 Hboot. My goal is to install CM 10.2.
Regards
Richard
You can not install any boot.img with locked bootloader, you can just ruu back.
If you want to install cm 10.2 unlock your boot loader, download cm10.2, flash boot.img from the downloaded zip and flash cm from recovery. Otherwise you can just ruu back
Sent from my One S using xda app-developers app
ka_55 said:
You can not install any boot.img with locked bootloader, you can just ruu back.
If you want to install cm 10.2 unlock your boot loader, download cm10.2, flash boot.img from the downloaded zip and flash cm from recovery. Otherwise you can just ruu back
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Hi,
I had tried this, but got into an endless fuzzy blue screen loop. This was because of S-on I believe. I had relocked the bootloader in preparation for an RUU.
I had figured that my best way out of this mess would be to flash a stock ROM, turn S-off and then flash cm
Regards
Richard
willi1972 said:
Hi,
I had tried this, but got into an endless fuzzy blue screen loop. This was because of S-on I believe. I had relocked the bootloader in preparation for an RUU.
I had figured that my best way out of this mess would be to flash a stock ROM, turn S-off and then flash cm
Regards
Richard
Click to expand...
Click to collapse
So have a good luck!
Sent from my One S using xda app-developers app