Hello,
I'm running on stock ICS on System 1, Liquidsmooth on 3, Mokee on 4 ( All latest weekly builds ) with JbX
Once in 3-4 times, system 3 or 4 will fail to boot. To make it work, I have to boot to system 1 and then reboot. Some how it works this way.
Do you guys have any solutions?
dittualex said:
Hello,
I'm running on stock ICS on System 1, Liquidsmooth on 3, Mokee on 4 ( All latest weekly builds ) with JbX
Once in 3-4 times, system 3 or 4 will fail to boot. To make it work, I have to boot to system 1 and then reboot. Some how it works this way.
Do you guys have any solutions?
Click to expand...
Click to collapse
I'm having the same issue
I guess its gota have the stock kernel in memory for it to work so u need a stock ROM to keep kexec booting.
atrix2man said:
I'm having the same issue
I guess its gota have the stock kernel in memory for it to work so u need a stock ROM to keep kexec booting.
Click to expand...
Click to collapse
I have Stock Rom as sytem 1. Dont you think it wont serve d purpose?
Related
I was flashing air kernel with cwm and succeded, but when i rebooted afrer flashing, the phone won't get to Google logo. I flashed Blue color + 65 fps HELP PLEASE
Nexus S, stock jelly bean 4.1.2, rooted, tried to flash air kernel..
Please someone reply. After the Google logo, the phone just goes blank... tried a battery pull and nothing..
matejilic said:
I was flashing air kernel with cwm and succeded, but when i rebooted afrer flashing, the phone won't get to Google logo. I flashed Blue color + 65 fps HELP PLEASE
Nexus S, stock jelly bean 4.1.2, rooted, tried to flash air kernel..
Please someone reply. After the Google logo, the phone just goes blank... tried a battery pull and nothing..
Click to expand...
Click to collapse
can u still go into recovery ??
power + volume up
ahmadalraii said:
can u still go into recovery ??
power + volume up
Click to expand...
Click to collapse
yes, i can. I tried to flash Matr1x kernel, reflash Air and flash AOKP milestone 1, situation is the same, it shows only the google logo, after that i can see nothing, blank screen..
did u try a whole new combo..
try hellybean rom 4.2 with airkernel..
not all roms works with all kernels some roms have thier own kernels like cm
is your problem that u want this specific rom to boot and u have tried many kernels and stuck in bootloops
or ur phone is not working with any rom ? and any kernel >?
be carefull if flashed a jelly bean rom to flash a jellybean kernel ..or hust try to boot with the provided kernel with the zip rom
Wipe data in CWM. Make a backup first.
Factory reset and wipe data,cache before trying it again.
Sent from my Nexus S
ahmadalraii said:
did u try a whole new combo..
try hellybean rom 4.2 with airkernel..
not all roms works with all kernels some roms have thier own kernels like cm
is your problem that u want this specific rom to boot and u have tried many kernels and stuck in bootloops
or ur phone is not working with any rom ? and any kernel >?
be carefull if flashed a jelly bean rom to flash a jellybean kernel ..or hust try to boot with the provided kernel with the zip rom
Click to expand...
Click to collapse
my phone worked with stock. Then i tried to flash air kernel to stock rom to increase performance, but i got stock in bootloop i guess (wont go past the google logo..)
seibott said:
Factory reset and wipe data,cache before trying it again.
Sent from my Nexus S
Click to expand...
Click to collapse
tried multiple cache wipes/ dalvik cache wipes and factory resets.. i guess i'll try to flash stock image from google in hope to fix it...
i managed to flash cm 10 on my nexus s and it fixed all the problems. thank you for your help guys, cheers!
matejilic said:
i managed to flash cm 10 on my nexus s and it fixed all the problems. thank you for your help guys, cheers!
Click to expand...
Click to collapse
cheers ...:laugh:
Hi,
My Problem: Running JBX Kernel froze the phone in less than 30 mins for all Kexec Roms.
Running at stock kexec kernel seems fine though, eg. Slim bean beta5 stock kernel
Tested Kexec Roms: Pac-Man (4.2.2 & 4.3), Slim Bean Beta5, Dirty corn
Android Version: 4.2.2 and 4.3
Tested BMM slot: 3, 4 and 5
BMM 1st slot: Stock JB leaked 3, this is my main system (should be clean, no extra cpu module loaded)
Tests that did not work (problem persists):
1. Disable SR for Core, IVA Or/And MPU
2. Increase MIN voltage of MPU SR
3. Changed governor to others: interactiveX…
Not Yet test: Flash BMM slot 1 with Kexec Rom (Dtrail mentioned slot 1 is necessary for his kernel. But I want to make sure the kexec ROM running fine 1st before I switched over)
A bit history:
I’ve been monitoring the JBX thread for months since my phone was Kexec Reject group.
Since the black screen had been resolved, I booted Kexec Roms with joy but not too long.
All roms frozen with JBX kernel.
Anyone have same problem?
BMM Slot1 is necessary for JBX kernel? Any advice??
TIA
lapu
yes ,I do
lapu said:
Hi,
My Problem: Running JBX Kernel froze the phone in less than 30 mins for all Kexec Roms.
Running at stock kexec kernel seems fine though, eg. Slim bean beta5 stock kernel
Tested Kexec Roms: Pac-Man (4.2.2 & 4.3), Slim Bean Beta5, Dirty corn
Android Version: 4.2.2 and 4.3
Tested BMM slot: 3, 4 and 5
BMM 1st slot: Stock JB leaked 3, this is my main system (should be clean, no extra cpu module loaded)
Tests that did not work (problem persists):
1. Disable SR for Core, IVA Or/And MPU
2. Increase MIN voltage of MPU SR
3. Changed governor to others: interactiveX…
Not Yet test: Flash BMM slot 1 with Kexec Rom (Dtrail mentioned slot 1 is necessary for his kernel. But I want to make sure the kexec ROM running fine 1st before I switched over)
A bit history:
I’ve been monitoring the JBX thread for months since my phone was Kexec Reject group.
Since the black screen had been resolved, I booted Kexec Roms with joy but not too long.
All roms frozen with JBX kernel.
Anyone have same problem?
BMM Slot1 is necessary for JBX kernel? Any advice??
TIA
lapu
Click to expand...
Click to collapse
YES , I do. after I have installed JBX kernel at system3(i really less aware of these things, if i make mistake i want it to corrupt some system not the phone. so i did), wasn't able to boot into custom roms that i was using previously. i tried reinstalling custom roms and failed to boot. so, i restored to previous kernel (i think) with a file in the same thread "kernel_restore.zip". there comes a new problem called "customer id error: contact dealer etc" and the first boot image jellybeanx left even after restore. Dtrail tried help me. even that image is just left over.BUt now im installing custom roms with customer id error.....Good thing is PHONe s doing good.
Nani7
hi Nani,
so, you also have unstable kexec system with JBX...correct me if i'm wrong.
restore kernel had never worked for me at BMM.
i guess you had restored the kernel to system 1
just a small tip, before installing any custom rom's etc, besides nandroid, make sure to backup additionally the CID via BMM.
I too have a plethora of questions of multibooting kexec roms via BMM & also additionally installing jbx kernel. Will put these forth asap.
hi guys,
i'm getting more stable from JBX for BMM slot 3~6.
first, i need to restore my first slot (JB stock) to original setting (revert all changes made by PIMP my rom).
2nd, i did these changes using trickermod (from priority):
1. Enable FSYNC
2. Disable Dynamic FSYNC
3. Frequency lock: ON
4. Changed Scheduler: SIOPLUS (default was RAW)
5. Changed Governor to: smartassV2
i hope someone have problem with JBX can try this and verify...i'm still testing its stability for long run with AOSP Rom (4.3).
still same
lapu said:
hi Nani,
so, you also have unstable kexec system with JBX...correct me if i'm wrong.
restore kernel had never worked for me at BMM.
i guess you had restored the kernel to system 1
Click to expand...
Click to collapse
Hello,
May be....May not be.........most probably..i did in sys 3...those memories are not stored..i forget...but i have this cid image back up file in clockworkmod folder....do you think that something leftover to me to try to no to get cid error on every boot...these day many roms using jbx,,shouldnt i go try them....
Nani
how its going
lapu said:
hi guys,
i'm getting more stable from JBX for BMM slot 3~6.
first, i need to restore my first slot (JB stock) to original setting (revert all changes made by PIMP my rom).
2nd, i did these changes using trickermod (from priority):
1. Enable FSYNC
2. Disable Dynamic FSYNC
3. Frequency lock: ON
4. Changed Scheduler: SIOPLUS (default was RAW)
5. Changed Governor to: smartassV2
i hope someone have problem with JBX can try this and verify...i'm still testing its stability for long run with AOSP Rom (4.3).
Click to expand...
Click to collapse
Hi lapu,
i think by this time u would have came thru many roms as u can.....is JBx stable and okay....can we boot into custom rom after we flash JBx....i wonderd for ..if i installed this JBx in sys 3, How boot image changed which should from sys 1..I again want to try Jbx ,as new roms require the
Hello my friends,
I have that problem, every time that I reboot the phone, it pass BMM 3 second, and then stop on black screen whit the green led and the white buttons on. The only solution it's take off the battery many times, until 5 or 6 times, and then in on the CM . I was flash many CM versions, with kexec kernells from 0.6 to 0.8, and all of them have the same problem. I always do all wipes, data and cache, and many times back to stock room, and flash again cm , thinking that a pure stock fix the problem, but nothing, all times in system 1.
Please there is a solution for this problem, that i don't know, because is a big problem take off the battery always. And because too the rapid reboot don't work in this case.
Thanks in advance.
elgeorge_rp said:
Hello my friends,
I have that problem, every time that I reboot the phone, it pass BMM 3 second, and then stop on black screen whit the green led and the white buttons on. The only solution it's take off the battery many times, until 5 or 6 times, and then in on the CM . I was flash many CM versions, with kexec kernells from 0.6 to 0.8, and all of them have the same problem. I always do all wipes, data and cache, and many times back to stock room, and flash again cm , thinking that a pure stock fix the problem, but nothing, all times in system 1.
Please there is a solution for this problem, that i don't know, because is a big problem take off the battery always. And because too the rapid reboot don't work in this case.
Thanks in advance.
Click to expand...
Click to collapse
You might be a kexec reject....But are you flashing CM on system 1 or 3 onwards ??
Have you been able to flash any kexec based ROM's before??
JBX kernel should solve your problem......
darth_nihar said:
You might be a kexec reject....But are you flashing CM on system 1 or 3 onwards ??
Have you been able to flash any kexec based ROM's before??
JBX kernel should solve your problem......
Click to expand...
Click to collapse
1. Yes, I flashed CM on system 1 and 3, and the problem is the same.
2. Yes, I flashed other Kexec rooms but when the developers used Wangg Kernel, Ravikrang kernel and Hashcode Kernel, but any JBX kernel works for me , always black screen after reboot.
I have 2 questions,
A. Is there any file zip of Ravikrang kernel for BMM??
B. What is kexec reject? Do you have that problem? How you flash your rooms?
elgeorge_rp said:
1. Yes, I flashed CM on system 1 and 3, and the problem is the same.
2. Yes, I flashed other Kexec rooms but when the developers used Wangg Kernel, Ravikrang kernel and Hashcode Kernel, but any JBX kernel works for me , always black screen after reboot.
I have 2 questions,
A. Is there any file zip of Ravikrang kernel for BMM??
B. What is kexec reject? Do you have that problem? How you flash your rooms?
Click to expand...
Click to collapse
No there isn't a zip file for ravi's kernel if you flash any of his ROM's the kernel is built into it.......
Plain and simple kexec reject is when you boot your ROM which is kexec based and are stuck with a black screen......
Try flashing PA RC2 and use JBX u should be able to boot it .......
i installed cm 11 unofficial from this thread http://forum.xda-developers.com/showthread.php?t=2608377 but when i turn my moto g on it gets stuck in the cyanogenmod loading screen if anyone can help it will be great
You didn't want to post your issue in that thread?
I'm having same problem.. Also same problem for bam ROM
Sent from my XT1032 using xda app-developers app
managed to get out of the CM11 bootloop after applied Fix Permissions (or something similar) in TW's Custom Recovery.
Seems that only TW recovery can fix this through a permissions fix.
Got the same problem last night and the only thing to do to get it works was to re-flash the stock firmware, flash the recovery and reinstall the CM build. Latest build seems to be pretty good.
Simply wiping the cache before and after flash worked for me.
Sent from my XT1032 using Tapatalk
imxdot said:
Simply wiping the cache before and after flash worked for me.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Not for me, sadly.
I've also tried to re-flash the rom through the recovery but the only fix that worked for me was to flash the stock firmware and then install the CM via recovery.
Same here, had difficulties getting Cyanogen to boot.
What I did is :
- roll back to stock 4.3 : http://forum.xda-developers.com/showthread.php?t=2546251 (yes, you can roll back, read the end of the post)
- allow OTA update to 4.4.2
- install CWM
- in CWM : format /system, /data and /cache, install cyanogen from ZIP, wipe dalvik cache
Mysteriously it worked like a charm after many unsuccessful tries and a softbrick ^^
Btw, no need to root the stock ROM to install CWM or a custom ROM, just skip this step
Do you have the XT1032 version?
xavier66 said:
Same here, had difficulties getting Cyanogen to boot.
What I did is :
- roll back to stock 4.3 : http://forum.xda-developers.com/showthread.php?t=2546251 (yes, you can roll back, read the end of the post)
- allow OTA update to 4.4.2
- install CWM
- in CWM : format /system, /data and /cache, install cyanogen from ZIP, wipe dalvik cache
Mysteriously it worked like a charm after many unsuccessful tries and a softbrick ^^
Btw, no need to root the stock ROM to install CWM or a custom ROM, just skip this step
Click to expand...
Click to collapse
I´m tired of the mess made it because of the three different Moto G versions, i'm waiting for official Recovery from CWM, maybe 3 months it's to early but I wanna try this method. (I hope to don´t hardbrick haha)
I was having the same problem with every rom i tried. After going back complete stock with Alonsoch's tool in the original Dev thread, I was then able to get past the boot on any rom
Sent from my XT1034 using Tapatalk
stuck in loop after installation
Hi everyone
I have tried to install cyanogen mode date : 23, 22 nightly roms on my moto g xt1033 KK vesion using twrp as well as cyanomod recoveries but after installation my phone stuck on boot window. I waited for 20 min but nothing happens. I read throgh so many posts and orignal rom thread and found that its supporting 4.3 and 4.4 both versions and I want to test it with only 4.4. (Dont want to downgread).. Any solution?
I am newbee and want to take part in rom devlopment as tester. Sorry if i asked somethin silly or may be twice.
sandeepg9 said:
Hi everyone
I have tried to install cyanogen mode date : 23, 22 nightly roms on my moto g xt1033 KK vesion using twrp as well as cyanomod recoveries but after installation my phone stuck on boot window. I waited for 20 min but nothing happens. I read throgh so many posts and orignal rom thread and found that its supporting 4.3 and 4.4 both versions and I want to test it with only 4.4. (Dont want to downgread).. Any solution?
I am newbee and want to take part in rom devlopment as tester. Sorry if i asked somethin silly or may be twice.
Click to expand...
Click to collapse
please use the thread for the ROM you have issues with.
thread closed
Dears,
I have nexus 5 with open bootloader + Recovery clockwork-6.0.4.4 + root + MIUI V5 custom Rom
because the lag and the hate of my phone especially when Turn on 3G data, I decided to change the kernel to custom kernel
then I used the franco kernel r63 from this post
http://forum.xda-developers.com/google-nexus-5/orig-development/kernel-franco-kernel-r53-t2508284
I used the "franco.Kernel updater Free App" to download the latest update and flash it
but after that the nuxes 5 didn't work, still stock on the logo of Rom !!
I tried to install the stock kernel from this link boot-4.4.1 by "fastboot flash boot" command but still same problem
and also I tried to install the Trinity Kernel "T5-4.4.2-B10" by flashboot command and still same problem,
and tried to re flash the Zip file of MUIU Rom, but nothing new, same problem stock on the logo picture of Rom when start !
any help please ?
I want to install the franco kernel with my MIUI Rom, even if the solution will remove all my App & data no problem !
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Or just flash away from MIUI to get rid of your lag problem.
simms22 said:
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Click to expand...
Click to collapse
simms22
Many thanks for you, I change the kernel and used this "Silean Kernel Nexus 5", which is compatible with MIUI rom, and My Nexus 5 go a way from last problem ! Thanks again. :good:
SilkyJohnson said:
Or just flash away from MIUI to get rid of your lag problem.
Click to expand...
Click to collapse
Thanks for your Idea, this is my first time with this rom and I found it Good if the new kernel will solve these two problems ! I hope or I will get new Rom ! do you recommend any new good Rom ?!
Nuxes 5
Sent from my Nexus 5