Database Info

Stuck on boot animation.

Wondering if anybody else is having this problem? If I install a custom rom like cm11 unofficial I just get stuck on the boot animation. It happens on any custom rom I installed and I followed all instructions. Any ideas? Running 1034 16gb on kit kat.

imprzwv said:
Wondering if anybody else is having this problem? If I install a custom rom like cm11 unofficial I just get stuck on the boot animation. It happens on any custom rom I installed and I followed all instructions. Any ideas? Running 1034 16gb on kit kat.
Click to expand...
Click to collapse
Make sure your bootloader is unlocked and your device is rooted. In addition your recovery must be installed correctly.

eddvys said:
Make sure your bootloader is unlocked and your device is rooted. In addition your recovery must be installed correctly.
Click to expand...
Click to collapse
i have the same problem on my xt1032 unlocked and rooted.
how i know if my recovery is installed correctly?
(i can only flash stock rom)

yoyococo said:
i have the same problem on my xt1032 unlocked and rooted.
how i know if my recovery is installed correctly?
(i can only flash stock rom)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2563599 Flash CWM in fastboot
Push ROM files to your /sdcard/
Install using your recovery xxx.zip
Instruction are there just follow them right.

I had this problem yesterday. Here is how I fixed it:
Install stock firmware. I installed a 4.4 one. http://forum.xda-developers.com/showthread.php?t=2542219
Then rooted using superboot
Finally, I installed TWRP
It took like three tries to get superboot and twrp to work properly. That's how I fixed it. Goodluck
Sent from my XT1032 using Tapatalk

Worked great thank you
x-Wooboost-x said:
I had this problem yesterday. Here is how I fixed it:
Install stock firmware. I installed a 4.4 one. http://forum.xda-developers.com/showthread.php?t=2542219
Then rooted using superboot
Finally, I installed TWRP
It took like three tries to get superboot and twrp to work properly. That's how I fixed it. Goodluck
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Works great now on my XT 1034.

x-Wooboost-x said:
I had this problem yesterday. Here is how I fixed it:
Install stock firmware. I installed a 4.4 one. http://forum.xda-developers.com/showthread.php?t=2542219
Then rooted using superboot
Finally, I installed TWRP
It took like three tries to get superboot and twrp to work properly. That's how I fixed it. Goodluck
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Had the same problem with a xt1032 retail.DE version, but didn't work.
I flashed the US umts4.4.2 version, was able to install root using superboot (at 2nd of 3rd try) and installed TWRP. Tried to Cm11 and gapps installed good, but still got stuck on bootanimation.
Losing faith here.

well this just happened on my phone again. the way I fixed it last time isn't working now I have no idea what to do

Why is no one helping with this issue. Ive experienced this a lot and I always have to restore it stock. I have never been able to install a custom ROM no matter how many times I root.
Sent from my XT1034 using xda app-developers app

I have this issues also on 4.4 us global rom. Rooted and recovery cwm
Sent from my XT1032 using Tapatalk

There are two ways to get this fixed:
Fix permissions through TWPR recovery (not available on CWM recovery);
Restore to stock firmware (you can find 4.4.2 firmware here: http://forum.xda-developers.com/showpost.php?p=49861244&postcount=101), flash CWM recovery (or TWRP) and flash CM11 again. This worked for me.
Let me know!

Can anyone confirm these methods? (at least the first one)
Done the 2nd multiple times, same result.

i have same problem , and don't know what to do ?
i flashed 3 different ROMs all stuck on bootanimation .

I'm curious. Did this happen the first time you flashed a rom? When I bought my Moto G (tesco version) it had 4.3 on it, I upgraded to 4.4 via OTA. Unlocked the bootloader, flashed CWM for 4.4 kernel, made backup and flashed various CM builds, booted with no problems.
Now I restored to backup, because of the non-working GPS.
It stucks on CM (the flashed rom) boot screen or the bootloader warning screen?

BBOXPT said:
Can anyone confirm these methods? (at least the first one)
Done the 2nd multiple times, same result.
Click to expand...
Click to collapse
After trying the second one 3 times, I used the TWRP/Fix Permissions method and successfully flashed CM11.

kellerman40 said:
I'm curious. Did this happen the first time you flashed a rom? When I bought my Moto G (tesco version) it had 4.3 on it, I upgraded to 4.4 via OTA. Unlocked the bootloader, flashed CWM for 4.4 kernel, made backup and flashed various CM builds, booted with no problems.
Now I restored to backup, because of the non-working GPS.
It stucks on CM (the flashed rom) boot screen or the bootloader warning screen?
Click to expand...
Click to collapse
I got CM 11 to boot the first time on a dirty flash, but forgot to flash gapps, so got a load of FCs when it loaded up. Since then, any sort of flash, clean or dirty gives me a bootloop.
Even directly flashing boot.img via fastboot doesn't fix it. Reinstalling the stock firmware and starting from scratch doesn't do it either.

problem flashing roms on moto g xt1032

Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.

Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app

skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now

Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help

Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.

I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa

A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.

Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great

hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)

A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?

will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032

dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.

[Q] [Custom ROMs] Stuck in Bootloop after many attempts

Hey guys,
I have followed many tutorials (video and text) on how to flash ROMs on the Moto G, but to no avail.
I followed all the steps correctly, and my Moto G is stuck in a boot loop after 10 minutes. This happens every time I want to flash a ROM, and it has happened with many different ROMs, what am I doing wrong?
I have wiped all the wipey stuff and whatnot, I just don't know why it isn't working!
This is my first post, so please call me out if i missed any details I need to write down
Custom ROMs I have tried:
CyanogenMOD (Nightly)
Paranoid Android (unoffical)
C-Rom
Any help at all is much appreciated
Regards,
barky02

barky02 said:
Hey guys,
I have followed many tutorials (video and text) on how to flash ROMs on the Moto G, but to no avail.
I followed all the steps correctly, and my Moto G is stuck in a boot loop after 10 minutes. This happens every time I want to flash a ROM, and it has happened with many different ROMs, what am I doing wrong?
I have wiped all the wipey stuff and whatnot, I just don't know why it isn't working!
This is my first post, so please call me out if i missed any details I need to write down
Custom ROMs I have tried:
CyanogenMOD (Nightly)
Paranoid Android (unoffical)
C-Rom
Any help at all is much appreciated
Regards,
barky02
Click to expand...
Click to collapse
Happened to me at first too, when i had 4.4.2 stock in my Moto G, CM11 gets stuck in the bootanimation forever, what i did is downgrade to 4.3 (including the recovery) and then installed CM11.

Z-WolF said:
Happened to me at first too, when i had 4.4.2 stock in my Moto G, CM11 gets stuck in the bootanimation forever, what i did is downgrade to 4.3 (including the recovery) and then installed CM11.
Click to expand...
Click to collapse
Thanks a lot so how do I downgrade? and where can I find the 4.3 CWM recovery?
Edit: also, isnt 4.3 the upgrade? or is that a typo

barky02 said:
Thanks a lot so how do I downgrade? and where can I find the 4.3 CWM recovery?
Edit: also, isnt 4.3 the upgrade? or is that a typo
Click to expand...
Click to collapse
What i meant was that you need to flash the 4.3 stock recovery, along the 4.3 rom. those files normally come together.
Then you flash the custom recovery of your choice (i used CWM 6.0.4.7 touch) and CM11.
Look Here
4.3 = Jelly Bean Android
4.4 = KitKat Android

alezardstar said:
Dude, I completely understand you but I want to be very sure about what I will do foot try another time.
I back to 4.3 image downloading it here ( http://sbf.droid-developers.org/phone.php?device=14) and it already has the 4.3 recovery inside or I must to download it (from where?). Can you share the thread where you found the CWM recovery, please? Just to do it identical as you.
Thanks in advance.
Click to expand...
Click to collapse
let me see...
the guide to downgrade to 4.3 is this one
the guide to install CMW and CM11 is in cyanogenmod's wiki, you can find it here
as far as i know every (or at least most) stock ROM zip or tar file out there comes with a "recovery.img"

Yup downgrade to 4.3 needed then you'll have no problems
Sent from my Moto G using xda app-developers app

Happened to me as well (mine was rooted too), I followed the exact same steps Z-Wolf mentioned after searching and this seems to be a common problem.

I bought my device already upgraded to 4.4.2. I was able to install c-rom with no issue. I'm using tweaky ROM right now.
I'm curious as to why some devices need to downgrade and some don't?
Sent from my XT1032 using Tapatalk

What I did was installing cm11 from GPE and then wipe all cache and wipe system data or something like that (it deletes everything un your infernal sd), it worked for me after having bootloop with every ROM I tried. Ask the guys for those wipes ( I think it was format system/data but I don't remember very well).

ATRIXXIRTA said:
I bought my device already upgraded to 4.4.2. I was able to install c-rom with no issue. I'm using tweaky ROM right now.
I'm curious as to why some devices need to downgrade and some don't?
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
How did you do that man? I tried almost every found on this forum and I wasn't abble to get this done, always the same problem with encrypted partition comes up
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Z-WolF said:
Happened to me at first too, when i had 4.4.2 stock in my Moto G, CM11 gets stuck in the bootanimation forever, what i did is downgrade to 4.3 (including the recovery) and then installed CM11.
Click to expand...
Click to collapse
Did you get the downgrade version from here, which one did you use? I tried several and without success. I have a Moto G GPE

I will share my history with my phone since it can be useful for someone... Well I got the phone about a month ago, since i ordered from amazon, there's no way im going to return it for garanty if it broke, flashed cwm and rooted the same night, but when i was going to flash cm, l encountered a bootloop, since i didn't make a backup... i was at lost, my computer doesn't detect the phone in cwm, so I was with bootloop and not able to flash anything... Tried fastboot... Yes! so I downloaded stock and flashed away in fastboot, then i tried again with cm11, and this time it booted fine! I guess something prevented us to flash anything directly over stock, dunno what

I was stuck on boot loop for the past 24h, trying to flash a Lego ROM.
After a few factory resets and stock ROM flashes, I came across the solution of downgrading from KitKat 4.4.2 to Jelly Bean 4.3, then flash Lego again, and now all is well and good !
Here's the guide : http://forum.xda-developers.com/showthread.php?t=2542219

Flash Radios and New Kernel.
1031_Boost_US_CDMA_390.81.01P.zip
https://www.androidfilehost.com/?fid=23681161096070097
1031_Boost_US_CDMA_Kernel_3.4.42-gb89c9dd.zip
https://www.androidfilehost.com/?fid=23681161096070111
in my case I was flashing a Falcon, Boost Moto G, keep getting bootloops.
This is the first time in years I have ever had to sideload the Kernal and Radio, but non the less it stopped my bootloop.
Now if I get the error 16 voice mail message taken care of and input my MSL......
https://www.androidfilehost.com/?fid=23681161096070097

Stuck at boot animation for Custom ROM. (Bootloop)

I Rooted my XT-1033. And having CWM recovery. Now I'm installing custom ROM EHNDROIX V.
I followed all steps. After Installation it stuck at it's boot animation.
I moved back to Stock ROM. Ant solution for this situation.

Flash single sim rom first.. And try to flash the custom rom.. Many custom roms won't work on dual sim version.. And read the instruction carefully
Sent from my XT1032 using XDA Premium 4 mobile app

I learned (through trial and error) that is (at least for the CM 11) impossible on the Moto G to flash the custom ROM from Kitkat. I first had to revert it back to the stock rom without the Kitkat upgrade before applying the CM 11 custom ROM. Otherwise it would also get stuck at boot animation.
Arthur

ant24x7 said:
I Rooted my XT-1033. And having CWM recovery. Now I'm installing custom ROM EHNDROIX V.
I followed all steps. After Installation it stuck at it's boot animation.
I moved back to Stock ROM. Ant solution for this situation.
Click to expand...
Click to collapse
common problem.. /data and /data/media needs to be reformatted in order to boot custom rom. but that pose even more difficult situation where the zip file needs to be pushed via adb.
downgrading and installing custom seems to work easily.

padhu1989 said:
Flash single sim rom first.. And try to flash the custom rom.. Many custom roms won't work on dual sim version.. And read the instruction carefully
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah there are very few ROMs fro dual sim variant. And followed each and every step while flashig this ROM. Like wiping Data/Cache/Dalvik. Still problem persist.
arthurjr said:
I learned (through trial and error) that is (at least for the CM 11) impossible on the Moto G to flash the custom ROM from Kitkat. I first had to revert it back to the stock rom without the Kitkat upgrade before applying the CM 11 custom ROM. Otherwise it would also get stuck at boot animation.
Arthur
Click to expand...
Click to collapse
Thank you for response. Are you sure about this. That I have to go back to JB and then try.
abhifx said:
common problem.. /data and /data/media needs to be reformatted in order to boot custom rom. but that pose even more difficult situation where the zip file needs to be pushed via adb.
downgrading and installing custom seems to work easily.
Click to expand...
Click to collapse
Thank you for response. Can you please tell me in details what do you mean by wiping /data and /media. Generally cwm backup is stored there afaik. And downgrading what ?

now wait just a second i own the single sim version x1032 and got it retail with 4.4.2 out of the box, rooted and booloader unlocked. so far ive tried both lego rom (x1032 single sim version supported and another single sim rom supported rom) they both get stuck on bootanimation. Whats my solution? i, no noob and ive had to restore my stock firmware each time after waiting 15 mins each.
btw im installing from a usb flash drive with a micro usb connector directly plugged to phone. dont think its the issue cause it backs up and restores stock rom just fine.

TowerRoot + Autorec + Cyanogen Mod

When I found out that Towel Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?

yoerz said:
When I found out that Tower Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
Click to expand...
Click to collapse
CM builds use JB kernel and baseband. You'll need to find the right JB baseband for your phone and flash it and then the CM build you want to use.

AyDee said:
CM builds use JB kernel and baseband. You'll need to find the right JB baseband for your phone and flash it and then the CM build you want to use.
Click to expand...
Click to collapse
What's a baseband? and what do I "do" with it once I find it?

yoerz said:
What's a baseband? and what do I "do" with it once I find it?
Click to expand...
Click to collapse
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.

AyDee said:
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
Click to expand...
Click to collapse
The only problem is, I can't do a full wipe because I have to keep the ZIP files of Cyanogen Mod and Gapps on the device. There is no way to load them on the device when in TWRP.
Also, that post is very confusing. It has a list of roms, and then a download link to a completely different list. How do I know which download correlates with:
D801BK (T-Mobile USA)
D80110C
M8974A-AAAANAZM-1.0.190034
by QUALCOMM, Incorporated Aug 10 2013
Is it LGD801_10C_RADIO.zip ??

AyDee said:
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
Click to expand...
Click to collapse
OK I tried again, flashed LGD801_10C_RADIO.zip before the Cyanogen zip, then Gapps and Supersu, restarted and it's doing the same thing. Cyanogen screen loading animation but never booting up.
Like I said before, I CANNOT do a full wipe in TWRP because that will delete all the ZIP files on the device. This device does not have an SD card I can load them on and the USB connection doesn't work (driver not found, this is apparently a known bug).

yoerz said:
OK I tried again, flashed LGD801_10C_RADIO.zip before the Cyanogen zip, then Gapps and Supersu, restarted and it's doing the same thing. Cyanogen screen loading animation but never booting up.
Like I said before, I CANNOT do a full wipe in TWRP because that will delete all the ZIP files on the device. This device does not have an SD card I can load them on and the USB connection doesn't work (driver not found, this is apparently a known bug).
Click to expand...
Click to collapse
With TWRP can't in the wipe section you do an advanced wipe and just not select internal storage, thus leaving the ROM on your phone while still doing a full wipe?

TheBestEver said:
Full wipe means the "factory reset" option in TWRP. You're on kitkat bootloader. You need to somehow find a flsshable .zip of the jb bootloader. Modem doesn't matter. I've used JB and KK modem and both work. Maybe you're on stock KK kernel and need to flash the JB kernel? If you're on KK stock and want to jump to CM you should find a flashable .zip of both kernels or .IMG times and try that as well if option 1 doesn't work. Sorry
Click to expand...
Click to collapse
Where can I find that Kernel?

TheBestEver said:
Are you trying to flash CM 10.2 or CM11?
Click to expand...
Click to collapse
I tried both.
CM Stable-10.2.0-d801
and
CM 11-20140617-NIGHTLY-d801

yoerz said:
which restarted into TWRK Recovery. Great!
Click to expand...
Click to collapse
Is that where Miley needs to go? Typo of the day goes to you!

Goldie said:
Is that where Miley needs to go? Typo of the day goes to you!
Click to expand...
Click to collapse
Twrp.. Twrk.. whats the difference. You know what I mean.

yoerz said:
Twrp.. Twrk.. whats the difference. You know what I mean.
Click to expand...
Click to collapse
Well yeah obviously. This is why you were awarded "Typo of the day" and not "WTF of the day"
Sent from my SM-G900F using Tapatalk

yoerz said:
I tried both.
CM Stable-10.2.0-d801
and
CM 11-20140617-NIGHTLY-d801
Click to expand...
Click to collapse
Both of which still run 4.2 sources. Before u flash either , what must occur first is flash the 4.2 jb modem then Rom etc.
Sent from my LG-D801 using XDA Premium 4 mobile app

You might be able to help me, I root with TowelRoot (checked with Root Checker) and then installed/run AutoRec for T-Mobile d801. And it boot loop into download mode, (i have a package to fix that, but still have no Recovery)

yoerz said:
When I found out that Towel Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
Click to expand...
Click to collapse
You can find the KK modem in the SOKP thread in Development and that may help.