I rooted and flashed a custom ROM to my phone several months ago, but now I need to take it in for repairs/replacement. So, I want to take it back to stock and reset the flash counter. But I have a few questions that I am confused about.
1) Is flashing a stock ROM with Odin, and restoring a stock backup with TWRP basically the same thing? (When/Why would you do one, or the other?). I did make a TWRP backup after I rooted, and before I flashed the custom ROM..
2) Does it matter which version of Odin you use with your phone or ROM? I have 2 versions of stock ROM for my phone (Galaxy Note 2). The later version flashes fine every time. The older one flashes fine (Odin says: Success 1 / Fail 0), but hangs when booting. I have downloaded that older ROM from 3 different locations and all do the same thing. Why would one stock ROM flash fine every time, but the other not???
3) I currently have that newer stock ROM flashed on the phone, but the flash counter says 2. I didn't know you had to be rooted to reset the flash counter with TriangleAway. So, now it looks like I have to root my phone all over again go reset the flash counter. But if I root the phone, reset the flash counter to 0, and then flash a stock ROM, won't that then increase the Flash Counter to 1?
Thanks for any help!
Snack
No its different
When u flash with odin you will on stock
When you flash with twrp(i dont know about twrp) u will get to your stock rom but rooted
Yes its matters
U use odin given with particular phone
It is because of odin version that one rom was flashing fine and not the other
No it would not once you are on stock it will disappear
This should fix ur problem:thumbup:
HIT THANKS IF I HELPED
Sent from my GT-S7500
Thanks amit!
Is there somewhere that lists which phones that should use which versions of Odin? I could not find a list..
Snacko
SnackoDog said:
Thanks amit!
Is there somewhere that lists which phones that should use which versions of Odin? I could not find a list..
Snacko
Click to expand...
Click to collapse
U will get ur odin where u search for ur rom
There is no such list
This may help u:thumbup:
HIT THANKS IF I HELPED
Sent from my GT-S7500
Hmm... well I got my stock ROMs from SamMobile.com and they did not come with Odin. I don't even see Odin available on their site. I have downloaded several stock roms from different places and they did not have Odin. That's why I have been confused if you need different versions of Odin for different phones. Also because there is no site that has a list.
But I did download Chainfire's CF Auto-Root to root and flash TWRP only. And that download did come with Odin3 v1.85. So, at this point I am 'guessing' that this is the version of Odin I should use for my phone (Galaxy Note 2 SGH-I317), but it's just a guess. So, I used this version of Odin to flash one of those earlier stock ROMs that were hanging during boot. And they still hang at boot, so I don't know if it's Odin or the stock roms or what. But this v1.85 does also flash my later stock ROM with JB 4.1.2, which flashed fine also with the v3.07 of Odin. So, both versions of Odin work for that stock, but not the other stock ROMs. Very strange...
Try googling how to flash stock rom of ur device
And use odin to flash cwm
This should fix ur problem:thumbup:
HIT THANKS IF I HELPED
Sent from my GT-S7500
Clearing up some confusion
I ran into the same kind of issue having recieved a working version of odin with my root from cf auto root site... then came the 5.0 lollipop and the desire to ditch sprint and go to metro pcs...
everything is about a year old, or there abouts, and I see alot of posts pointing to http://www.sammobile.com/ .... first of all they most certainly do not have every firmware like they claim and they absolutly don't have old versions... they make mention of some but as far as the links working out.... :crying:
much baiting and switching with these samsung devices....
I did find a post where a guy almost sounded like he knew what he was talking about until he went on to say that it is not an exact science and it is all based on if - then , chance- happening
either works or it doesn't.... likelihood of you bricking while trying to flash stock rom is very low... but you can read what he said anyway... nothing past first post though as it doesn't lead anywhere... unless you have one of the model numbers he refers too... and even then, maybe not..
http://forum.xda-developers.com/galaxy-s3/themes-apps/27-08-2013-odin-3-09-odin-1-85-versions-t2189539
this site was the only one that had what i needed as far as the stock ROM pre lollipop
http://server14.stockroms.net/download/GalaxyS5/SM-G900P/G900PVPU1ANCB_G900PSPT1ANCB_SPR.zip
and wouldn't you know ... no link to ODIN... so .... I found a every-version-having-download-site
http://odindownload.com/Samsung-Odin/#.VY2WBPlVhBc
but of course there is no heads or tails to be understood from that site either... but at least you will have every version and don't have to worry about trying to find the next one....
Hope this helped....:laugh:
Related
Soft bricked(total noob) just got the JIG, got into download menu.
Can someone give me instructions on how to get back to stock, gain root, and install custom ROMS/ MIUI
It be very appreciated, i'm doing this for a buddy and i don't want to give him a brick lol.
1. for restoring stock : http://forum.xda-developers.com/showthread.php?t=731989
2. use superoneclick to root
3. Install clockwork recovery and rom manager
4. Install custom roms.
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Pretty sure it came with 2.2 but not sure.
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
b-eock said:
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
Click to expand...
Click to collapse
See thats the thing i hate to be a pain but im looking for detailed instructions.
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
thank you for pointing it out
OP might want to look at these threads:
http://forum.xda-developers.com/showthread.php?p=15330252
http://forum.xda-developers.com/showthread.php?t=963403
Note: as b-eock pointed out, make sure what was your stock version before restoring it!
I've always just flashed newer than my stock to avoid that problem and it always works well for me, after bricking or when i want to flash a new rom i flash to cappy gingerbread and flash boog kernal to get CWM(clockworkmod). CWM is essential is you plan on flashing to other roms. If you plan on flashing to another rom anyways it doesn't matter which version of stock you load as long as it work so I'd just flash 2.2 or newer.
http://forum.xda-developers.com/showthread.php?t=1300843
- this has all the odin 1-click flashable packages for captivate
To do everything you want to do...
flash back to stock, use 2.2 or one of the 2.3 versions. If you plan on flashing to a gingerbread rom (2.3) you'll most likely need the gingerbread bootloaders, if you don't originally flash a odin package with the gingerbread bootloaders you might be asked to install them later depending on what rom you use
incase you don't know odin is the computer program used to flash one click packages, you can find it by searching XDA, one click packages won't require it.
odin has to be open before you plug the usb into the phone putting it into download mode.
to flash to other roms you need CWM (ClockWorkMod-a customized recovery mode for the phone) the thread in this post has links to odin flashable kernals with CWM for each software build. To get CWM flash the respective kernal for the version you use. You'll need odin to flash the new kernal, its essentially stock apart from CWM. In odin select PDA and browse to the kernal zip to flash it.
you can search around XDA for oneclickroots, they will typically be odin or CWM flashable it's quite straight forward. New roms will typically already be rooted so you shouldn't have to root again.
good luck!
Does anyone know which exact ODIN i need to flash to get back to 2.2 from download mode.
You can use adamoutler's uckb2 heimdall one click. That's stock 2.2.
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
David522d said:
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
Click to expand...
Click to collapse
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
jmtheiss said:
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
Click to expand...
Click to collapse
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
David522d said:
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
Click to expand...
Click to collapse
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
jmtheiss said:
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
Click to expand...
Click to collapse
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Another update.
I rooted the 2.2 im on and now enabled non market apps to be downloaded.
Can someone now tell me how to install recovery and install custom ROMS!
i know i know im annoying, im sorry!
David522d said:
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Click to expand...
Click to collapse
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
jmtheiss said:
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
Click to expand...
Click to collapse
I already rooted =/ , should i still try this?
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
jmtheiss said:
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
Click to expand...
Click to collapse
Im not sure if i have "FULL" ODIN. I have the ODIN i just used to install 2.2. Then i rooted it using SUPER1CLICK.
Where do i get the full odin
Sorry people im new to Samsung and got a question... i used odin to flash CWM to my girls skyrocket... im pretty sure like nvflash i only have to do that one time... but anyways... ive heard that it counts the times that you've flashed something to the phone... if i only use CWM to flash rom's etc does the phone or odin still count those... or does odin only count the flashes when i use odin to flash something...?? sorry guyz im use to fastboot and nvflash new to the whole odin thing...although my next phone may be a samsung.. thanks for any help in advance....
Yes odin Only triggers flash counter When you use it!!!!!! For me i never used Odin so my cusom binary dLoad says No!!!!!!
KingDavid63 said:
Sorry people im new to Samsung and got a question... i used odin to flash CWM to my girls skyrocket... im pretty sure like nvflash i only have to do that one time... but anyways... ive heard that it counts the times that you've flashed something to the phone... if i only use CWM to flash rom's etc does the phone or odin still count those... or does odin only count the flashes when i use odin to flash something...?? sorry guyz im use to fastboot and nvflash new to the whole odin thing...although my next phone may be a samsung.. thanks for any help in advance....
Click to expand...
Click to collapse
ive flashed roms many times and i've always resorted to stock rom because its the most stable, the only times the flash counter was triggered is when i flashed back to stock. Is there a way to reset the flash counter, not that i care because if my phone break or need warranty, i dont send to for repair, rogers send me a new phone and i put the broken one in the box and send it back to them. but if ive ever had to, how can i reset flash counter?
it only gets triggered when you flash KERNEL in odin/heimdall, NOT just flashing recovery or /system.
CWM will never trigger the flash counter, period, no matter what you flash in CWM
appdroid said:
Yes odin Only triggers flash counter When you use it!!!!!! For me i never used Odin so my cusom binary dLoad says No!!!!!!
Click to expand...
Click to collapse
He's asking if cwm will trip the counter in odin. It will not. I flash 3e and cwm back n forth for clean wipes before I switch roms and I'm still showing NO. Flashing a rom will from what I've read.
Sent from my SAMSUNG-SGH-I727 using xda premium
polish_pat said:
ive flashed roms many times and i've always resorted to stock rom because its the most stable, the only times the flash counter was triggered is when i flashed back to stock. Is there a way to reset the flash counter, not that i care because if my phone break or need warranty, i dont send to for repair, rogers send me a new phone and i put the broken one in the box and send it back to them. but if ive ever had to, how can i reset flash counter?
Click to expand...
Click to collapse
You can't.
Sent from my SAMSUNG-SGH-I727 using xda premium
Silly question, but why do developers package ROMS for ODIN and not CWM? Is it a lot more work? For instance, I cannot find Rogers stock ROM for CWM.
.......the tars can for one take you back too 100 percent stock. And 2 if ur soft brickd ...and your phone wont even boot to cwm. Odin is your only answer. The tars get you back to stock recovery also
If I want to restore my device to factory state (stock rom) and wipe the phone clean regardless of the current custom rom,
is there a simple way to do it ?
I mean restore the stock boot loader, the stock kernel, and firmware, and clear all
user data.
Is the procedure dependent on the current rom I have on the device ?
I'm guessing the easiest way would be to update your phone to an official carrier update rom. It'll do everything you asked.
MoPhoACTV Initiative
kalda01 said:
If I want to restore my device to factory state (stock rom) and wipe the phone clean regardless of the current custom rom,
is there a simple way to do it ?
I mean restore the stock boot loader, the stock kernel, and firmware, and clear all
user data.
Is the procedure dependent on the current rom I have on the device ?
Click to expand...
Click to collapse
What phone do you have? If you want to flash EVERYTHING for HTC (for example), on HTC's website they have the zip file that will update everything to the official ROM.
Happy flashing! xP
FBA21 said:
What phone do you have? If you want to flash EVERYTHING for HTC (for example), on HTC's website they have the zip file that will update everything to the official ROM.
Happy flashing! xP
Click to expand...
Click to collapse
I have a Samsung I897 and also Nexus S and I'd like to wipe both clean and install latest stock ROM. Do I need Odin or Kies for that ?
kalda01 said:
I have a Samsung I897 and also Nexus S and I'd like to wipe both clean and install latest stock ROM. Do I need Odin or Kies for that ?
Click to expand...
Click to collapse
better us odin rather than kies but ensure kies uninstalled from ur pc before using odin as it will pose problems while flashing official roms. u can find the official firmware for ur model either at samsung website or sammobile.com along with the procedure to install the same using odin
Sun90 said:
better us odin rather than kies but ensure kies uninstalled from ur pc before using odin as it will pose problems while flashing official roms.
Click to expand...
Click to collapse
You don't need to uninstall Kies. In fact, it's better to leave it installed in case your drivers ever need reinstalling. Just run task manager and look in the process list for anything beginning with Kies and kill it. Kies doesn't like Odin, but Odin is what you need.
just download the matching stock firmware on sammobile.com and flash it with odin, repartition checked, this should do i think
I found links to the AT&T firmwares on sammobile.com but no clue where to get ODIN from.
kalda01 said:
I found links to the AT&T firmwares on sammobile.com but no clue where to get ODIN from.
Click to expand...
Click to collapse
odin is quite well known - this forum here or google should be able to give you very good answers and download links
dozz01 said:
odin is quite well known - this forum here or google should be able to give you very good answers and download links
Click to expand...
Click to collapse
Yes, there are tons of hits on Odin for many different versions. does it matter
if it is not the latest one ?
i use odin v 1.3 all the time and i think its not the newest version
Long story short I'm a semi noob to the my note 10.1 GT-N8013
I recovery flashed back to the stock 4.0.4 after flashing various other roms and came to notice 4.1 jelly bean update was available tried to download & failed obviously because of not being on stock recovery at the time as i had the same issue once upon a time with my GS3 but any how......
My question is after doing nearly 2 hours of searching where are the files for the stock recovery? everything i've pulled up online thus far has shown me recovery for every other build than what i have (IMM76D.N8013UEALI3).
that being said, can anybody show me where i can find em or is it safe to flash the stock recovery from another n8013 4.0.4 build number?
VivaLaCam92 said:
Long story short I'm a semi noob to the my note 10.1 GT-N8013
I recovery flashed back to the stock 4.0.4 after flashing various other roms and came to notice 4.1 jelly bean update was available tried to download & failed obviously because of not being on stock recovery at the time as i had the same issue once upon a time with my GS3 but any how......
My question is after doing nearly 2 hours of searching where are the files for the stock recovery? everything i've pulled up online thus far has shown me recovery for every other build than what i have (IMM76D.N8013UEALI3).
that being said, can anybody show me where i can find em or is it safe to flash the stock recovery from another n8013 4.0.4 build number?
Click to expand...
Click to collapse
are you trying do do it back with odin? than you can find your original files on sammobile. (but for me the problem stays with that way, i hope it helps for you...)
rambo001 said:
are you trying do do it back with odin? than you can find your original files on sammobile. (but for me the problem stays with that way, i hope it helps for you...)
Click to expand...
Click to collapse
yeah, I'll be flashing it with odin. I would just wipe everything and restore via cwm recovery but with limited internet as i'm overseas on a deployment right now it's kind of an issue.
VivaLaCam92 said:
yeah, I'll be flashing it with odin. I would just wipe everything and restore via cwm recovery but with limited internet as i'm overseas on a deployment right now it's kind of an issue.
Click to expand...
Click to collapse
You first need to download the pda file to go back to stock.
If you have a backup on your device you can reset it to the backup moment.
Hey everyone, so I have from what I researched here is a "soft" bricked phone as my recovery mode (TWRP) and download mode works fine but no boot.
First let me say this is the Canadian version of the Note 5 SM-N920W8. I posted here because there is no forum for that version everything seems to be the same and posted under 920T version.
HISTORY OF THE PHONE:
It was a while ago that I rooted but let me describe to the best of my memory how my note 5 ended up in the state that it is in. So stock was lollipop 5.1.1. I flashed the skyhigh kernel which gave root access but had random reeboot issues which led me to flashing TWRP recovery so I could flash boot.img as an image file which did take away the random reeboot problem and removed that red error on startup "kernel is not SEANDROID enforcing". Life was good at this point! Everything worked great woth no issues. I greenified everything and underclocked the cpu with system tuner and used system app removed to manually all the bloatware as I didnt want to start using custom roms I stuck with the stock firmware. Part of the reason that I didnt want to use custom roms is because I started reading up on xposed framework, so I decided to flash it and give it a try. I read the xposed framework thread followed the download link to my version downloaded it and flashed with TWRP. Immediately after this was a bootloop.
TROUBLESHOOTING:
Unfortunately I had no backup in TWRP.. In a panic before researching I started flashing other kernels like arters kernel and I think space x whcih can be used on some note 5s.. which brought back that SEANDROID error message in the bootloop. I flashed the skyhigh kernel but flashing the boot.img didn't get rid of that error message again.
A friend of mine at work recommended that I just wipe everything and flash the stock firmware from sammobile.com with odin since I still have recovery mode then just re root. So I went into TWRP and wiped EVERYTHING. I think there was 4 or 5 boxes in twrp data wipe but I selected all the boxes. Now the phone doesn't even get the Samsung logo on boot or anything but download mode works so I flashed twrp again which loads up. I downloaded my version of the Samsung firmware which was about 1.6gb from sammobile.com. I open odin load the file that I extracted. A tar.md5 file which took longer than normal to load into the AP but I didn't change any settings or anything. Should I have? Because after I hit start it failed. I retried at least 3 times. Does this firmware contain all the AP CP and all the other boxes or do I need to find those separately? Should I just try a custom rom?
Im not sure what to do here I have a completely blank phone but twrp and download mode works so it recoverable right?
I read up on adb sideloader but didn't get too far.. is that worth trying for recovery in this case?
I also read a few threads on here for other samsung versions where they say to flash a PIT file with odin but they all say that it only works specifically for that phone and I couldn't find one for this version of the note 5.
I know the #1 rule here is to research before posting and Ive really made my best attempt to research on here and Google over the last few days but I really need my phone back. Any help is greatly appreciated.
re: phone won't boot
bloewen4 said:
Hey everyone, so I have from what I researched here is a "soft" bricked phone as my recovery mode (TWRP) and download mode works fine but no boot.
First let me say this is the Canadian version of the Note 5 SM-N920W8. I posted here because there is no forum for that version everything seems to be the same and posted under 920T version.
HISTORY OF THE PHONE:
It was a while ago that I rooted but let me describe to the best of my memory how my note 5 ended up in the state that it is in. So stock was lollipop 5.1.1. I flashed the skyhigh kernel which gave root access but had random reeboot issues which led me to flashing TWRP recovery so I could flash boot.img as an image file which did take away the random reeboot problem and removed that red error on startup "kernel is not SEANDROID enforcing". Life was good at this point! Everything worked great woth no issues. I greenified everything and underclocked the cpu with system tuner and used system app removed to manually all the bloatware as I didnt want to start using custom roms I stuck with the stock firmware. Part of the reason that I didnt want to use custom roms is because I started reading up on xposed framework, so I decided to flash it and give it a try. I read the xposed framework thread followed the download link to my version downloaded it and flashed with TWRP. Immediately after this was a bootloop.
TROUBLESHOOTING:
Unfortunately I had no backup in TWRP.. In a panic before researching I started flashing other kernels like arters kernel and I think space x whcih can be used on some note 5s.. which brought back that SEANDROID error message in the bootloop. I flashed the skyhigh kernel but flashing the boot.img didn't get rid of that error message again.
A friend of mine at work recommended that I just wipe everything and flash the stock firmware from sammobile.com with odin since I still have recovery mode then just re root. So I went into TWRP and wiped EVERYTHING. I think there was 4 or 5 boxes in twrp data wipe but I selected all the boxes. Now the phone doesn't even get the Samsung logo on boot or anything but download mode works so I flashed twrp again which loads up. I downloaded my version of the Samsung firmware which was about 1.6gb from sammobile.com. I open odin load the file that I extracted. A tar.md5 file which took longer than normal to load into the AP but I didn't change any settings or anything. Should I have? Because after I hit start it failed. I retried at least 3 times. Does this firmware contain all the AP CP and all the other boxes or do I need to find those separately? Should I just try a custom rom?
Im not sure what to do here I have a completely blank phone but twrp and download mode works so it recoverable right?
I read up on adb sideloader but didn't get too far.. is that worth trying for recovery in this case?
I also read a few threads on here for other samsung versions where they say to flash a PIT file with odin but they all say that it only works specifically for that phone and I couldn't find one for this version of the note 5.
I know the #1 rule here is to research before posting and Ive really made my best attempt to research on here and Google over the last few days but I really need my phone back. Any help is greatly appreciated.
Click to expand...
Click to collapse
If you have either a custom or stock rom installed or the official Samsung firmware installed
then it should be an easy fix, you must have flashed a incompatible kernel or perhaps you
deleted the kerned. (the phone will not boot without a kernel)
You need to find a compatible kernel and flash it using twrp recovery.
Here is a link you may want to try, it's for kernels for the Note 5 only:
http://forum.xda-developers.com/tmobile-galaxy-note5/orig-development
It might even be better if you were to Odin flash a fresh copy of your Note 5 specific
firmware using download mode, that's the surest way to get your phone working again.
Give it a try...
Good luck,
Have a great day!
Good luck!
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
A friend of mine at work recommended that I just wipe everything and flash the stock firmware from sammobile.com with odin since I still have recovery mode then just re root. So I went into TWRP and wiped EVERYTHING. I think there was 4 or 5 boxes in twrp data wipe but I selected all the boxes. Now the phone doesn't even get the Samsung logo on boot or anything but download mode works so I flashed twrp again which loads up. I downloaded my version of the Samsung firmware which was about 1.6gb from sammobile.com. I open odin load the file that I extracted. A tar.md5 file which took longer than normal to load into the AP but I didn't change any settings or anything. Should I have? Because after I hit start it failed. I retried at least 3 times. Does this firmware contain all the AP CP and all the other boxes or do I need to find those separately? Should I just try a custom rom?
Click to expand...
Click to collapse
Unfortunately I had no backup in TWRP.. In a panic before researching I started flashing other kernels like arters kernel and I think space x whcih can be used on some note 5s.. which brought back that SEANDROID error message in the bootloop. I flashed the skyhigh kernel but flashing the boot.img didn't get rid of that error message again
Click to expand...
Click to collapse
re: not sure what you mean
bloewen4 said:
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
Click to expand...
Click to collapse
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
or flashing firmware is the same process in odin. Use the AP slot.
And now I know what messed up your phone... it was as I posted before either
flashing the wrong kernel or the kernel got deleted who knows how.
That's all I can tell you except if you want the link to the official Samsung
N920T firmware here it is:
http://forum.xda-developers.com/tmo...t/rom-android-6-0-marshmallow-note-5-t3250812
The link also guides you thru the odin flashing process and other important things.
Good luck!
re: not sure what you mean
Quote:
Originally Posted by bloewen4
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
Click to expand...
Click to collapse
I was researching some methods of flashing firmware to a completely wiped phone and read somewhere that there is a method to download all the files individually and put them into all the other sections in odin but I guess these tar.md5 files are a package of everything and one file is enough for a completely wiped phone? If all I need to k ow is to download that firmware unzip and flash in AP then awesome So longlong as they both have the same effect.
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
Click to expand...
Click to collapse
Just to clarify the order of this; first download that firmware via that link. 2nd wipe everything in twrp except for recovery so I can go back into twrp and factory reset in twrp? This alone will boot my phone before flashing the firmware? Or do I need to factory reset in twrp then flash that firmware in odin to get a boot? And is this custom firmware do I need to root again after I get boot?
Thanks for the link to that firmware going to be trying this right after work
bloewen4 said:
re: not sure what you mean
Quote:
Originally Posted by bloewen4
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
I was researching some methods of flashing firmware to a completely wiped phone and read somewhere that there is a method to download all the files individually and put them into all the other sections in odin but I guess these tar.md5 files are a package of everything and one file is enough for a completely wiped phone? If all I need to k ow is to download that firmware unzip and flash in AP then awesome So longlong as they both have the same effect.
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
Just to clarify the order of this; first download that firmware via that link. 2nd wipe everything in twrp except for recovery so I can go back into twrp and factory reset in twrp? This alone will boot my phone before flashing the firmware? Or do I need to factory reset in twrp then flash that firmware in odin to get a boot? And is this custom firmware do I need to root again after I get boot?
Thanks for the link to that firmware going to be trying this right after work
Click to expand...
Click to collapse
Wait. You have a W8 variant. Odin won't flash a T variant on your W8 device, I don't believe. You need to download your carrier specific, hopefully 6.0.1 version, of the firmware for your specific carrier version, and flash that in the latest 3.10.7 version of odin.
---------- Post added at 09:21 PM ---------- Previous post was at 09:08 PM ----------
bloewen4 said:
re: not sure what you mean
Quote:
Originally Posted by bloewen4
Hi thanks for the reply! I did try that already unless flashing a stock firmware is different than putting it in AP as I flashed the kernel. Do I need to select some different optioms in odin since I data wiped everything and need all the necessary files to boot the phone? Oh and I did put the skyhigh kernel back on.
I was researching some methods of flashing firmware to a completely wiped phone and read somewhere that there is a method to download all the files individually and put them into all the other sections in odin but I guess these tar.md5 files are a package of everything and one file is enough for a completely wiped phone? If all I need to k ow is to download that firmware unzip and flash in AP then awesome So longlong as they both have the same effect.
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
Just to clarify the order of this; first download that firmware via that link. 2nd wipe everything in twrp except for recovery so I can go back into twrp and factory reset in twrp? This alone will boot my phone before flashing the firmware? Or do I need to factory reset in twrp then flash that firmware in odin to get a boot? And is this custom firmware do I need to root again after I get boot?
Thanks for the link to that firmware going to be trying this right after work
Click to expand...
Click to collapse
What carrier are you on? Go to sammobile and find out exactly what firmware is the latest for your variant on your carrier, for us T variants it's dpd1, but yours will be different, and sammobile is slow so if you can find a mirror somewhere for the stock firmware do that, download it...should be a tar.md5....if you get an error loading it you can often remove the .md5 from the extension...now first reboot recovery and you only need to wipe art/dalvik cache, system, data, cache, and if you want to internal storage but I normally don't...if you wipe efs and everything else you'll be sorry because only thing that will restore it is a full factory odin firmware flash...which is exactly what we're doing...so wipe those partitions then reboot download mode....launch odin and load your downloaded image into the AP slot. Make sure it's at least 3.10.7 version of Odin...when you connect the usb after rebooting to download mode you should see a green/blue box with COM:x (where x is a com port number on your pc) and it should say added...now flash it and wait until it finishes, it'll reboot maybe even a couple times, but it'll eventually make it to the setup screen- from here you can continue stock or flash twrp in odin then recovery flash a rooted kernel for stock rooted or continue with a custom rom, there's a fix in the note 5 gen section for making t/w8 devices work with call audio on intl roms and there's some stock Deodexed stuff at this point and certainly tekhd's mm rom...so from there the choices are yours...but your device is fine you just NEED to flash the correct stock firmware for your variant and use the latest version of odin with a factory usb cable and latest usb drivers from Samsung on your pc when you do it...you'll find links to all this stuff in most of the guides that are abundantly available...
Wait. You have a W8 variant. Odin won't flash a T variant on your W8 device, I don't believe. You need to download your carrier specific, hopefully 6.0.1 version, of the firmware for your specific carrier version, and flash that in the latest 3.10.7 version of odin.
Click to expand...
Click to collapse
I realize I have a W8 and hes providing the firmware for a T. I rooted with a kernel that was for a T version and everything worked fine. I researched rooting note 5 SM-N920W8 and they said do everything the same for the T version because theyre basically identical and isnt much info on the w8 version. So far Ive had no issues flashing everything designed for the T version on my W8. Actually Ive only tried flashing stock w8 firmware from.sammobile.com and got a fail in odin so now Ill try the version MisterJunkie provided me with for the T version unless considering all this you think I should still try a different firmware all together for the W8?
Misterjunky said:
Your best bet is to download the official Note 5 N920T odin flash firmware,
unzip it so you will end up with a TAR.MD5 file.
Then do a full wipe including system, data, cache, dalvik and last but not least
a factory reset in twrp recovery.
Once you do that your phone will be working properly again, flashing a kernel
or flashing firmware is the same process in odin. Use the AP slot.
And now I know what messed up your phone... it was as I posted before either
flashing the wrong kernel or the kernel got deleted who knows how.
That's all I can tell you except if you want the link to the official Samsung
N920T firmware here it is:
http://forum.xda-developers.com/tmo...t/rom-android-6-0-marshmallow-note-5-t3250812
The link also guides you thru the odin flashing process and other important things.
Good luck!
Click to expand...
Click to collapse
Bud, that's not the official tmo pd1 firmware, and I'm not sure if the leaked (alright it would likely run) would be the best here...plus he scares me when he says he cleared EVERYTHING cuz I'm thinking back to exactly how much twrp will wipe, but it's a lot so I fear he's going to need some partitions restored that are only going to come from a full pit file mapping...I don't believe official pd1 would flash in odin, nor would I recommend doing so- I would locate the most recently official firmware to ensure all partitions are restored, then if he doesn't have official mm support he can look into the leak, but if he had official for his variant and carrier that's his best bet to ensure 100% fix and give him a solid foundation to start from if he wants to root, rom, mod, etc
Not to discount your advice, I'd just hate to see him in a worse place than he is...which he's not even bricked YET...but he's starts screwing with wiping efs or messaging with csc stuff from different variants and he could back himself into a corner...
What carrier are you on? Go to sammobile and find out exactly what firmware is the latest for your variant on your carrier, for us T variants it's dpd1, but yours will be different, and sammobile is slow so if you can find a mirror somewhere for the stock firmware do that, download it...should be a tar.md5....if you get an error loading it you can often remove the .md5 from the extension...now first reboot recovery and you only need to wipe art/dalvik cache, system, data, cache, and if you want to internal storage but I normally don't...if you wipe efs and everything else you'll be sorry because only thing that will restore it is a full factory odin firmware flash...which is exactly what we're doing...so wipe those partitions then reboot download mode....launch odin and load your downloaded image into the AP slot. Make sure it's at least 3.10.7 version of Odin...when you connect the usb after rebooting to download mode you should see a green/blue box with COM:x (where x is a com port number on your pc) and it should say added...now flash it and wait until it finishes, it'll reboot maybe even a couple times, but it'll eventually make it to the setup screen- from here you can continue stock or flash twrp in odin then recovery flash a rooted kernel for stock rooted or continue with a custom rom, there's a fix in the note 5 gen section for making t/w8 devices work with call audio on intl roms and there's some stock Deodexed stuff at this point and certainly tekhd's mm rom...so from there the choices are yours...but your device is fine you just NEED to flash the correct stock firmware for your variant and use the latest version of odin with a factory usb cable and latest usb drivers from Samsung on your pc when you do it...you'll find links to all this stuff in most of the guides that are abundantly available...
Click to expand...
Click to collapse
My carrier is Rogers. I did goto sammobile.com already and downloaded and flashed what I thought was the current stock firmware for my 920w8, but I flashed without wiping all data as previously stated. Maybe doing this will allow my firmware to flash? Will try when Im home from work. Will also post the link from sammobile.com for the exact firmware I download just to verify ots the right one.
Yeah I literally wiped everything I checked all the boxes and I remember having to manually type y e s to proceed so yeah pretty serious wipe lol.
I have the latest version of odin 3.10.7 and tried installing drivers on my pc said theyre already installed.
When I connect my phone to usb in download mode it says com:4
I thought also that just flashing the stock firmware would be the solution since I get download mode and twrp I just have a blank phone but as I said I did get the stock firmware from sammobile.com and try but it failed. Maybe I grabbed the wrong one but it looked pretty straightforward. Maybe with MM coming out Wednesday for rogers note 5 Im downloading the wrong version.
Im worried like you wrote earlier that I deleted too much with twrp if I needing mapping partitions and PIT files I will need some serious help that stuff is beyond me.
Go to sammobile and find out exactly what firmware is the latest for your variant on your carrier, for us T variants it's dpd1, but yours will be different, and sammobile is slow so if you can find a mirror somewhere for the stock firmware do that, download it...should be a tar.md5....if you get an error loading it you can often remove the .md5 from the extension...now first reboot recovery and you only need to wipe art/dalvik cache, system, data, cache, and if you want to internal storage but I normally don't...if you wipe efs and everything else you'll be sorry because only thing that will restore it is a full factory odin firmware flash...which is exactly what we're doing...so wipe those partitions then reboot download mode....launch odin and load your downloaded image into the AP slot. Make sure it's at least 3.10.7 version of Odin...when you connect the usb after rebooting to download mode you should see a green/blue box with COM:x (where x is a com port number on your pc) and it should say added...now flash it and wait until it finishes, it'll reboot maybe even a couple times, but it'll eventually make it to the setup screen- from here you can continue stock or flash twrp in odin then recovery flash a rooted kernel for stock rooted or continue with a custom rom
Click to expand...
Click to collapse
Goodmorning, as I mentioned I would try this right after work. Heres what I did.. I verified that I had the 3.10.7 version of odin which I do, checked drivers on pc which I have. I re downloaded the firmware from here http://www.sammobile.com/firmwares/database/SM-N920W8/ Its was the Canadian Rogers version 5.1.1 near the bottom as mm isnt out for rogers yet.. Oh and I checked my cable ot connected another device to my PC.. so after all this I went into twrp wiped everything you mentioned. After that I was looking for the factory reset option in twrp but couldn't find anywhere only restore which I have no rom backups made. Do I need this step?
Went into download mode pressed vol up.. opened odin 3.10.7. I did notice a change after wiping. Its now says com:6 instead of com:4 if that means anything.. I loaded the firmware into AP it took a while to load but it did without errors. Flashed and failed If you need I can copy the error message from odin in here tonight.
Do you think I need to remap partitions as you said earlier? Getting PIT files? Im lost here... appreciate any help
Still with a blank phone, any ideas?
Or if anyone could direct me to another thread that might be useful for re mapping partitions?
Have you tried flashing twrp again in Odin?
I hit too many buttons before when wiping. It even erased my recovery.
Once I had recovery again I could Odin flash the official firmware.
Could try Philz recovery as well.
Sent from my SM-N920T using XDA-Developers mobile app
Yeah I did try that heres the link where I got the firmware and yeah twrp is on there.
Goodmorning, as I mentioned I would try this right after work. Heres what I did.. I verified that I had the 3.10.7 version of odin which I do, checked drivers on pc which I have. I re downloaded the firmware from here http://www.sammobile.com/firmwares/database/SM-N920W8/ Its was the Canadian Rogers version 5.1.1 near the bottom as mm isnt out for rogers yet.. Oh and I checked my cable ot connected another device to my PC.. so after all this I went into twrp wiped everything you mentioned. After that I was looking for the factory reset option in twrp but couldn't find anywhere only restore which I have no rom backups made. Do I need this step?
Went into download mode pressed vol up.. opened odin 3.10.7. I did notice a change after wiping. Its now says com:6 instead of com:4 if that means anything.. I loaded the firmware into AP it took a while to load but it did without errors. Flashed and failed If you need I can copy the error message from odin in here tonight.
Click to expand...
Click to collapse
bloewen4 said:
Yeah I did try that heres the link where I got the firmware and yeah twrp is on there.
Click to expand...
Click to collapse
Since you have twrp on the phone.. Tap to create a backup even if there's no system on it so that you can at least make it create the folder.. Try using adb to push a ROM and kernel to the phone so you can use twrp to flash it. If you can get into the phones storage using Windows then just drop a ROM and kernel for your device in the folder and then use twrp to flash.
By the way.. Use the SkyHigh kernel.
Follow the directions to a T!!
http://forum.xda-developers.com/note5/orig-development/kernel-skyhigh-tw-6-0-1-kernel-t3321646
If you can get into the phones storage using Windows then just drop a ROM and kernel for your device in the folder and then use twrp to flash.
Click to expand...
Click to collapse
I did try immediately to connect with Windows to my phone so I could try flashing stock firmware with twrp but its currently not allowing me access to view storage on Windows though it does connect with odin saying com:6.
Since you have twrp on the phone.. Tap to create a backup even if there's no system on it so that you can at least make it create the folder..
Click to expand...
Click to collapse
I will do this as soon as I am home from work. Will this perhaps allow access with Windows and/or adb sideloader?
Try using adb to push a ROM and kernel to the phone so you can use twrp to flash it.
Click to expand...
Click to collapse
I will be researching how to do this. Have you any threads to learn adb? So basically this will allow me to put ROMS or other files into the internal memory?
By the way.. Use the SkyHigh kernel.
Follow the directions to a T!!
http://forum.xda-developers.com/note...ernel-t3321646
Click to expand...
Click to collapse
Is this the right kernel for SM-N920W8?
* SAME kernel for ALL supported variant !!
** If other party cannot hear voice when on speaker phone ** Then read Post #636
SM-N920 C / CD / G / i [ v3.2 ]
SM-N9200_HK [ v3.2 ]
Click to expand...
Click to collapse
Also Marshmellow isnt out officially for SM-N920W8 so Ill need a kernel for lollipop 5.1.1 unless you suggest to wait for marshmellow then try a mm kernel?
Thanks for helping!
How about this adb sideloader does anyone think that will work to load the firmware? If so any good threads to guode me?
What did you end up doing? I have a similar problem except no recovery mode, just download mode for Odin.
bloewen4 said:
Goodmorning, as I mentioned I would try this right after work. Heres what I did.. I verified that I had the 3.10.7 version of odin which I do, checked drivers on pc which I have. I re downloaded the firmware from here http://www.sammobile.com/firmwares/database/SM-N920W8/ Its was the Canadian Rogers version 5.1.1 near the bottom as mm isnt out for rogers yet.. Oh and I checked my cable ot connected another device to my PC.. so after all this I went into twrp wiped everything you mentioned. After that I was looking for the factory reset option in twrp but couldn't find anywhere only restore which I have no rom backups made. Do I need this step?
Went into download mode pressed vol up.. opened odin 3.10.7. I did notice a change after wiping. Its now says com:6 instead of com:4 if that means anything.. I loaded the firmware into AP it took a while to load but it did without errors. Flashed and failed If you need I can copy the error message from odin in here tonight.
Do you think I need to remap partitions as you said earlier? Getting PIT files? Im lost here... appreciate any help
Click to expand...
Click to collapse
Where did you get your firmware from?
Why oh why did I bother reading through this entire thread, with intentions to help OP. Lol I didnt realize the date till the last post.