Database Info

[TUTORIAL]How to root Alcatel 918N (HARD WAY) when Superoneclick and Unlockroot fails

NOTE: I will not be held responsible on anything that may happens to your phone... This proceedure is to DO IT ON YOUR OWN RISK!! and rooting the phone may void your warranty ..
Its better to try Superoneclick and Unlockroot procedure first before you try this!! this is just your last option when you think both fails to root your phone.
These are the steps I did to successfully root my cheap Alcatel OT-918N (white from SUN Carrier Philippines) in chronological order.
Credits should go to breakk and his team and the forum where it was posted http://www.movilesdualsim.com/foro/threads/9022-TUTORIAL-ROOTEAR-ALCATEL-OT-918-D-(Android-2-3-5) This is the 3rd procedure they suggested I just translated it.. Thanks a lot mates!!!
Download all and follow all instructions carefully:
1. Drivers MTK6516_PL-2303_para_XP, vista y win 7.rar--- http://www.mediafire.com/?32e6q4fzx7ahoeh
2. 918D system.img (pass: breakk.movilesdualsim.com)--- http://www.mediafire.com/?f4dahqmmucqha9c
3. flash tool and scatter.txt --- http://www.mediafire.com/?9w5b5h1ywseljrr
4. EXtract all downloads to a single folder that can be easily located.
5. Backup your files
6. make sure the phone is charged with enough battery then turn the phone off
7. while its off connect the phone to your PC using a USB Cable
8. An unknown device will appear instantly
9. choose to update driver manualy.Depending on the OS you have (xp, vista, 7) install the appropriate driver from STEP 1.
10. If you installed the drivers correctly UNPLUG your phone and you can now proceed to the next step
11. run "Flash_tool.exe" from the extracted files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
12. click on the yellow folder button on the right that says "Scatter-loading"
13. browse for the file MT6573_Android_scatter_Alcatel_OT_918D.txt select it and click open
14. it will gives you an ERROR [WARNING HINT] JUST PROCEED and click OK
15. a list will appear, scroll down and CLICK the BOX beside "ANDROID"
16. then double click on the word "Android" and browse for the file system.img (the file you downloaded in Step 2) and open it
17. Now click the button Download in the top of the flashtool window
18. This will initiate a 15 second countdown at the bottom of the window, plug the 918N in the usb port during this countodown (the phone must be off)
19. You will see a yellow bar @ the bottom, wait until it goes reaches 100%. Once this is done there will be a message that will report that you successfully completed the process,also a green/white circle will appear in the flashtool and on the screen of your mobile the battery charging indicator will appear. UNPLUG the phone from the usb port and press the POWER. The phone will start and the Android logo will appear, now just wait a few minutes without touching anything on the phone (buttons or touchscreen), it will take some time to load the system.img. Once the screen displays the menu that asks for password the for 2 SIM cards you are ready, you have succesfully rooted the 918N!!! JUST HIT THE THANKS BUTTON
For Custom Roms try here http://www.symbianize.com/showthread.php?t=688494&highlight=alcatel+918N

Is a good tutorial.
Greetings.

breakk said:
Is a good tutorial.
Greetings.
Click to expand...
Click to collapse
thanks this is all you guys

I did not continue because when I plug in my phone while powered off I see only "MTK65xx Preloader" and another unknown device. The unknown one disappears forever. I chose to manually install the driver for MTK65XX preloader thing with the mobileuncle one. When I reconnect it Windows still tries to install the driver. This might be because the drivers weren't properly installed.
I'm not risking it until this one is cleared up XD I know what to expect from the flash tool, but the driver installation in Windows is unclear (windows itself, not this tutorial)
Edit: LOOOOOOOOOOOOOOOOOOOOOOOL I don't know what I just did. I tried Easy Rooting Toolkit and SuperOneClick (again) and magically my phone got rooted. LOL. Dunno what happened there (other than enabling everything under "Development"). Thank you, heavens.

kpbotbot said:
I did not continue because when I plug in my phone while powered off I see only "MTK65xx Preloader" and another unknown device. The unknown one disappears forever. I chose to manually install the driver for MTK65XX preloader thing with the mobileuncle one. When I reconnect it Windows still tries to install the driver. This might be because the drivers weren't properly installed.
I'm not risking it until this one is cleared up XD I know what to expect from the flash tool, but the driver installation in Windows is unclear (windows itself, not this tutorial)
Click to expand...
Click to collapse
You can reinstall the driver again when it ask you the second time. And once the driver is not installed it will not established a connection to your phone and the flash tool will give you an error saying no device is connected. It will abort the flashing process so nothing will be flashed and all will be the same... The only thing you should be afraid of is when the yellow thing runs and you accedentally stop the process before reaching 100%. And lot of courage is needed as well. Hahaha
Sent from my HTC Glacier using xda premium

And the MTK65XX Preloader is the driver you need to install. When it popup dont choose search automatically, choose the other one and manually locate for the drivers youve download
Sent from my HTC Glacier using xda premium

Sir Jbazt_katuforzs i'm using windows 7 32bit i just can't install the preloader driver and i don't know why. Tried the exe installer and manual but still when i'm connecting it on data cable it can't find the preloader like what "kpbotbot" 's experiencing. The Manual installation is loading a modem driver for the device.

Drag0nh3art76 said:
Sir Jbazt_katuforzs i'm using windows 7 32bit i just can't install the preloader driver and i don't know why. Tried the exe installer and manual but still when i'm connecting it on data cable it can't find the preloader like what "kpbotbot" 's experiencing. The Manual installation is loading a modem driver for the device.
Click to expand...
Click to collapse
Choose the driver depending on your OS. Did the pc recognized an unknown device when you plug the phone while its off? If not the previous drivers you've installed from superoneclick and unlockroot messes the ports. Try to install it on a different pc running xp. It will only take you 5-10 mins

thanks

at last! I'm rooted! THANKS A LOT!!

thanks for this very reliable and detailed information.. got my unit rooted

im having problems on how to redetect my sd card and how to uninstall the pre installed apps but i already got the superuser does that mean its already rooted?

I tryed with my 918 (not 918N or 918D) and not work.
Any solution

JovanK said:
I tryed with my 918 (not 918N or 918D) and not work.
Any solution
Click to expand...
Click to collapse
it should work... for custom roms go here... http://www.symbianize.com/showthread.php?t=688494&highlight=alcatel+918N

vsk23 said:
im having problems on how to redetect my sd card and how to uninstall the pre installed apps but i already got the superuser does that mean its already rooted?
Click to expand...
Click to collapse
try to install a root app to check root acces

Hi sir, sad to say 3 methods posted on your tutorial didnt worked on my 2.3.6. Recently acquired this unit yesterday as retention/loyalty from Sun Cellular. Hope there will be an update soon. Thanks!

4trackmind said:
Hi sir, sad to say 3 methods posted on your tutorial didnt worked on my 2.3.6. Recently acquired this unit yesterday as retention/loyalty from Sun Cellular. Hope there will be an update soon. Thanks!
Click to expand...
Click to collapse
hi 4trackmind,
i'm interested in the new 2.3.6 kernel. can you try the steps posted here? www symbianize com/showpost.php?p=11514350&postcount=1
there are 2 sections on that page, flashing a custom recovery image and rooting by using an update. do tell us if both sections work.

mightnare said:
hi 4trackmind,
i'm interested in the new 2.3.6 kernel. can you try the steps posted here? www symbianize com/showpost.php?p=11514350&postcount=1
there are 2 sections on that page, flashing a custom recovery image and rooting by using an update. do tell us if both sections work.
Click to expand...
Click to collapse
Tried the one posted sir but still error message. See attached screenies.

able to root
Thanks a lot i was able to root my Alcatel glory!!! next stop installing a ROM

2.3.6 and Rooted..
just want to share, i successfully rooted my OT-918N from SunCellular PH with Android 2.3.6 using the following scatter.txt and recovery.img file.
the procedure is the almost the same. skipping the loading of system.img as we are only after the custom recovery to be able to install superuser and busybox.
another thing is i set the flashtool to USB Mode instead of scanning to com ports... hope you get the same results as i did.

[[CWM]] ( Recovery v6.0.xxx ) For Micromax A89

How to install clockworkmod recovery:
Click to expand...
Click to collapse
SP Flash Tool method, root not required
Click to expand...
Click to collapse
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.1.5 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Very Easy & safe way to FLASH CWM RECOVERY in any Android Device
steps:->
1. Downlaod CWM recovery.img
2: download recovery manager from HERE now Copy CWM recovery.img in SD card, now install the recovery manager.apk normally
3. Now open the recovery manager app you recently installed.
4. Click on recovery in app menu.
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your recovery
Click to expand...
Click to collapse
Some SS Tutorials for how to flash CWMR using SP Flash Tools
Click to expand...
Click to collapse
Check here all steps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
New & Latest Released CWMR 6.0.2.8 is now available for Micromax A89 Ported by ME
Click to expand...
Click to collapse
Here is The New Version of CWMR 6.0.2.8
Click to expand...
Click to collapse
Change Logs
Click to expand...
Click to collapse
Partition SD Card Option Added in Advance Menu
Install Zip From Sideload option added in Main menu
Backup & Restore Backup from Internal & Externel SD is now Available
Click to expand...
Click to collapse
Credit : -
bgcngm
yuweng
Cygwin
Me
dont say Thanks Hit
if you can
Click to expand...
Click to collapse

Sorry i dont have Installed DDMS in my newly formated PC thats why Take % Post Screenshots using My A90s
here are Proof this is working fine i personally Tested...

How to install clockworkmod recovery:
....
...
..
...
Credits goes to Cygwin Kitchen + ME
Click to expand...
Click to collapse
WTF! all you can shove your credit up your ass dude! although i am thankful to you but stealing someone else's credit isn't fair!
mujhe pata he ki ye indians ki gandi aadat he par yaar tum jese logo ke karan hi to hamari bejjezti hoti he.. sudhar jao!!
Click to expand...
Click to collapse
comeon dude! behave!
btw thanx! :laugh:

Your Welcome dude.............
I give credit Cygwin cuz i unpack stock recovery for system mount points thats why i give credits...........also i give credit to me cuz i port that Recovery for A89 Device lol............. btwn thanks for your Advice.....sudhar ne ki kosish jarur karenge.......

i am unable to install drivers...what should i do....i am using windows 8..

piyushverma said:
i am unable to install drivers...what should i do....i am using windows 8..
Click to expand...
Click to collapse
For Installing Driver just Run that exe file if you are in Win 8 then try this
Right Click on file and Run As Administer then finish instillation and Reboot PC then connect your device.....

it still does not work...can u make a flashable zip fr it??

piyushverma said:
it still does not work...can u make a flashable zip fr it??
Click to expand...
Click to collapse
Dude, that just means that drivers aren't compatible with Win8, just use your friends pc or other pc with xp/7, you can install TWRP which is touch friendly (same as cwm) here

its work
its work ..... thanx...

yes it worked on xp....thanx for help....:victory:

Hi Bhardik
I posted this news here. I ended up using one of your screenshots without your permission because I was in a hurry. I hope you have no problem with that. :cyclops: http://www.droidiser.com/2013/02/install-clokcworkmod-recovery-micromax-a89.html

Re: [[CWM]] ( Recovery v6.0.1.5 ) For Micromax A89
droidiser said:
Hi Bhardik
I posted this news here. I ended up using one of your screenshots without your permission because I was in a hurry. I hope you have no problem with that. :cyclops: http://www.droidiser.com/2013/02/install-clokcworkmod-recovery-micromax-a89.html
Click to expand...
Click to collapse
No need to ask me for permissions cuz here I am only try my best to help &provide something good or new to other memmbers ...its all right even u no need to ask me for my any work u post where u want I don't mind it any more
Sent from my A90 using xda premium

Micromax a89 CMW recovery problem
its not working in xp ............
and can u specify the time required for process to complete .....
The progression bar is not showing atleast 1% after the 10 min.......
can u make tke video of it.......
Must Reply I m in a very serrious problem m,,

You missed this step
BHARDIK said:
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.1.5 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
Click to expand...
Click to collapse
Click on Recovery and browse to the CWM_6.0.1.5_recovery file in the A89 CWM folder Please insert this line between 5th and 6th step. Name this step as 5.1

hafeezluqman said:
Click on Recovery and browse to the CWM_6.0.1.5_recovery file in the A89 CWM folder Please insert this line between 5th and 6th step. Name this step as 5.1
Click to expand...
Click to collapse
Check OP Post 1
Tutorials posted with ScreenShots
How to flash CWMR Using Sp Flash Tools
Hope now every user can understand better.........
Thanks
BR
Hardy Ahir

TheMaker01 said:
its not working in xp ............
and can u specify the time required for process to complete .....
The progression bar is not showing atleast 1% after the 10 min.......
can u make tke video of it.......
Must Reply I m in a very serrious problem m,,
Click to expand...
Click to collapse
Check OP post 1
there u see tutorials with screenshots its also working on Windows XP Sp2 and Win7 tested by me in both OS
Try and follow all steps again hope u done.........
Good Luck

Thanks a Lot to Bhardik
U r just Awesome !!!!!!!!!!!!!!!!!!!!!!!!!!!
And once Again Tankssssssssssssss A lottttttttttttttttttttt

if you are rooted , u can use this app (mobile uncle tools) in fone ,
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
to install any recovery u want , without need of a pc ..there is no need to undergo the complicated spflashtool method...
all thanks to the devs for coming up with cwm and twrp for this device

MTK uncle tools
mmxa110user said:
if you are rooted , u can use this app (mobile uncle tools) in fone ,
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
to install any recovery u want , without need of a pc ..there is no need to undergo the complicated spflashtool method...
all thanks to the devs for coming up with cwm and twrp for this device
Click to expand...
Click to collapse
U should know that the s/w that u recommended is not working in MICROMAX A 89 i.e (mobile uncle tools)
I m Telling u that bcoz i tried it by myself in my MICROMAX A89!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!http://forum.xda-developers.com/images/smilies/silly.gif

TheMaker01 said:
U should know that the s/w that u recommended is not working in MICROMAX A 89 i.e (mobile uncle tools)
I m Telling u that bcoz i tried it by myself in my MICROMAX A89!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!http://forum.xda-developers.com/images/smilies/silly.gif
Click to expand...
Click to collapse
yes u r right m. Uncle tools not working for me in my A89 /A90 and my A90S.... thats why i recommended sp flash tool methods its working fine without any problems......
Hardy
Sent from my A90 using xda premium

Driver issues mt65xx,solved (easy),mediatek devices(canvas a116)

1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
waNNa AppReCiate

bhargav1991 said:
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Still showing the same error: "S_BROM_CMD_STARTCMD_FAIL (2005)". Please tell me what to do.
Another thing, when I connect my A25 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?

Follow the same procedure with this drivers http://www.mediafire.com/?31nddwqdot5ajp2
Sent from my Micromax A110 using xda premium

bhargav1991 said:
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Hi,
I am having trouble installing drivers for win 8 x64 for micromax a116, which has same chip.
I have tried all possible things... can't install... any help ??
thanks
greg

i have tried this method and it works 100% try with different ports it should work and make sure which version u have 32 bit(x86) or 64 bit(x64)

Anybody know how to get one of these phones to connect with the tmobile network?

Well all this mediatek devices are unlocked .so any carrier sim should work
Sent from my GN708W using xda premium

gregferns said:
Hi,
I am having trouble installing drivers for win 8 x64 for micromax a116, which has same chip.
I have tried all possible things... can't install... any help ??
thanks
greg
Click to expand...
Click to collapse
Follow the below approach to install the drivers on Windows 8:
1. Go to the right bottom corner of the desktop and wait for the side menu to appear. When it's there click on the gear icon with the title "Settings".
2. Now click on the entry "More PC Settings", then click on the entry "General".
4. Scroll down to "Restart now" (under "Advanced startup") and click it.
5. Wait a bit for a menu.
6. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
7. Click on "Restart" and wait for the profit to happen.
When the computer restarts, select the option "Disable driver signature enforcement". After it finally booted into the operating system you can install the unsigned driver. After you've installed the driver reboot once again and you're done.

hafizimtiaz said:
Still showing the same error: "S_BROM_CMD_STARTCMD_FAIL (2005)". Please tell me what to do.
Another thing, when I connect my A25 phone without battery, the device manager list updates itself every two seconds: once it shows the preloader vcom port and then in the next refresh there's no vcom port and this process repeats. Any idea why?
Click to expand...
Click to collapse
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.

n4w4k said:
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.
Click to expand...
Click to collapse
worked for me also
first you have to install those above given drivers
and after that you able to:highfive::highfive::highfive::highfive:

Thank you so much!

When i connect device to pc via usb.. a sound comes and it shows in list of drivers as in other devices and within 2 seconds it removes from device manager with another sound.. i did try this many times but same result..
Wat to do?..
Sent from my A116 using xda premium

gregferns said:
Hi,
I am having trouble installing drivers for win 8 x64 for micromax a116, which has same chip.
I have tried all possible things... can't install... any help ??
thanks
greg
Click to expand...
Click to collapse
I m having same issue in windows 8..did u got any solution ?
---------- Post added at 10:08 AM ---------- Previous post was at 09:41 AM ----------
avi_wizard said:
Follow the below approach to install the drivers on Windows 8:
1. Go to the right bottom corner of the desktop and wait for the side menu to appear. When it's there click on the gear icon with the title "Settings".
2. Now click on the entry "More PC Settings", then click on the entry "General".
4. Scroll down to "Restart now" (under "Advanced startup") and click it.
5. Wait a bit for a menu.
6. Now click "Troubleshoot", then "Advanced Options" and after that click "Windows Startup Settings".
7. Click on "Restart" and wait for the profit to happen.
When the computer restarts, select the option "Disable driver signature enforcement". After it finally booted into the operating system you can install the unsigned driver. After you've installed the driver reboot once again and you're done.
Click to expand...
Click to collapse
great it worked for me :good:

guys help me i have gionee p2 mtk6572 but i cant install the drivers on windows 8 help me with the drivers or how to connect the device please....!!

How to flash without scatter file????????????

bhargav1991 said:
1>TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2>HOLDING VOLUME+ CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME+)
3>OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4>WAIT FOR 2-3 MINUTES
5>YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6>IN OTHER DEVICES ->MT65XX PRE-LOADER
7>RIGHT CLICK MT65XX PRELOADER
8>UPDATE DRIVER
9>LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10>IT WILL DO ITS STUFF
11>YO MAN THATS IT KeEp fU**ING d-_-b
NOTE:-
now you can flash firmware through sp-flash tool
if it does'nt work for first time repeat again
it will work for 2 or 3rd time
HOPE THIS WAS HELPFULL:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Thanks mate. It helps.

solved my problem with windows 7 installation using guide wrote below
hope it helps some one
MT65xx Driver
MT65xx Drivers guide
press thanks if it works

Well.
I've posted in other similar threads today but its because i really need help - running out of alternatives.
I've partially bricked my THL T200 - it is stuck in bootanimation after i removed gallery.apk from the rom using TitaniumBackup.
Already tried all those flash methods in different sequences (with battery, without battery) but my phone just connect\disconnect all the time - i can't even install the VCOM driver.
I've TWRP installed - is there any rom for this phone i can flash using this.
All i want is go back to stock.
Thanks in advance for any ideas !

abhishekjain.ims said:
I m having same issue in windows 8..did u got any solution ?
---------- Post added at 10:08 AM ---------- Previous post was at 09:41 AM ----------
great it worked for me :good:
Click to expand...
Click to collapse
Bro, how did you install it on win 8?? i have win 8.1 64 bit OS and whenever i try installing this following the same procedure, it says "The folder you specified does not contain a compatible software driver for your device." i' unable to install this darn driver.. please help

n4w4k said:
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.
Click to expand...
Click to collapse
mayank88288 said:
worked for me also
first you have to install those above given drivers
and after that you able to:highfive::highfive::highfive::highfive:
Click to expand...
Click to collapse
I Cant install the given drivers if MT65xx preloader disapears..?
And when i connect in off mode to my laptop and flash tools on download mode it does nothing my phone just goes charging?
See this thread: http://forum.xda-developers.com/general/help/mt65xx-flashing-problem-sp-flash-tool-t2846054

[TUT] Instructions MTK6577 USB VCOM Driver Installation

Since here every day again and again problems with the USB VCOM driver installation for MTK6577 appear Phones, here is a short guide to the installation, and a final, successful test with SPFlashtool!
Installation of the USB VCOM driver:
[1] With USBDeview, clean up your PC from all possible old MTK VCOM entries, then reboot your PC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[2] Smartphone is switched off, and still dont connect via USB to the PC.
[3] Open Device Manager and leave it open!
[4] Your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager.
(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.)
[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers
[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly!
[7] PC reboot!
[8] Open Device Manager and open the switched-off Smartphone via USB to the PC release, now connect (same USB port!)
[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry!
[10] At the moment the entry double click and click on "Update driver" under the tab "Driver".
[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.
Required Downloads:
Download MT6577 USB VCOM Driver (W7/Vista/XP) -> http://www.mediafire.com/?cypm22rgs2k83ji
Download MT6577 USB VCOM Driver (W8) -> http://www.mediafire.com/?7yee2of64nhl947
Download USBDeview -> http://www.mediafire.com/?becpnj761zh5o2w
Download USBDeview x64 -> http://www.mediafire.com/?41i2k36yyi1fzhz
Click to expand...
Click to collapse

Reserved

kumar abhishek said:
Reserved
Click to expand...
Click to collapse
any way to instal and make it work on win 8 ??

shivinxtreme said:
any way to instal and make it work on win 8 ??
Click to expand...
Click to collapse
same here not working on win 8 x64 bit

mohsin2cool said:
same here not working on win 8 x64 bit
Click to expand...
Click to collapse
Can u explain the full problem?
Sent from my Micromax A75 using Tapatalk 2

After installing all drivers and connecting the phone to pc without battery, the device manager shows it as mt65xx preloader.. but in few seconds it goes off . It comes as an unknown device..
Sent from my Micromax A116 using xda premium

ME Test In Win 7 SP1 Not Work.
---------- Post added at 10:56 AM ---------- Previous post was at 10:10 AM ----------
Plz Help For Install Driver.

Not Fixed?
Why??????????????????????????????

AhrimanSefid said:
Not Fixed?
Why??????????????????????????????
Click to expand...
Click to collapse
@AhrimanSefid
Check this file and see images for install driver in W7. Remember, install this as administrator. Installation also depends on the version of w7, it is x32 or x64.
Install drivers - Win7.rar

shivinxtreme said:
After installing all drivers and connecting the phone to pc without battery, the device manager shows it as mt65xx preloader.. but in few seconds it goes off . It comes as an unknown device..
Sent from my Micromax A116 using xda premium
Click to expand...
Click to collapse
Don't worry about that "unknown device"
You can connect your phone and continue to Flash.
If driver is not there for your phone then SP Flash Tool will keep on searching for your phone.
If driver is installed then SP Flash Tool will continue and start Flashing your phone.

shivinxtreme said:
any way to instal and make it work on win 8 ??
Click to expand...
Click to collapse
hi,, did you guys get the drivers to work on win 8 ??
If yes, do let me know how you did it..
thanks
greg

Not working in windows 7.. Already tried this process several times..
Sent from my GT-I9300 using Tapatalk 2

tapan15in said:
Not working in windows 7.. Already tried this process several times..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Sometimes SP Flash tool is main culprit.
U need to use appropriate version
Sent from my C6502 using Tapatalk 2

help
kumar abhishek said:
Since here every day again and again problems with the USB VCOM driver installation for MTK6577 appear Phones, here is a short guide to the installation, and a final, successful test with SPFlashtool!
Installation of the USB VCOM driver:
[1] With USBDeview, clean up your PC from all possible old MTK VCOM entries, then reboot your PC.
[2] Smartphone is switched off, and still dont connect via USB to the PC.
[3] Open Device Manager and leave it open!
[4] Your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager.
(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.)
[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers
[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly!
[7] PC reboot!
[8] Open Device Manager and open the switched-off Smartphone via USB to the PC release, now connect (same USB port!)
[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry!
[10] At the moment the entry double click and click on "Update driver" under the tab "Driver".
[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.
Click to expand...
Click to collapse
Nt working with even windows 7....
i tried it many times bt unsuccessful.. i followed all d steps bt unable to find where d problem is?
when i connected usb without battery , the drivers installed sucessfuly bt device manager hadnt displayed mtk drivers... after rebooting my pc and i connected phone to pc with usb.. and d next moment the message displayed is drivers are nt installed ... and i checked out device manager bt it showing only micromax a90s which is nt connected.. i mean nt working.... any solutions for this... i wanna use uah rom bt hate this all bull ****s... waiting for uah help.....

Worked on Windows 8... Please follow the correct procedure. Just i flashed TWRP and replaced CMW (for testing only) and work fine.
If needed, i can post again the full procedure to flash CMW / TWRP / LEWA recovery.
Thanks

apoorv.mehrotra said:
Worked on Windows 8... Please follow the correct procedure. Just i flashed TWRP and replaced CMW (for testing only) and work fine.
If needed, i can post again the full procedure to flash CMW / TWRP / LEWA recovery.
Thanks
Click to expand...
Click to collapse
Please do..:good:

StanleyD said:
Please do..:good:
Click to expand...
Click to collapse
Hello All,
I tried both on window 7 & 8; 64 bit and procedure as mentioned by the OP is perfect; however i am posting it again here
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery which ever you like TWRP / CMW (I tried both of them now and they are working for me on MMX A110)
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device and repeat above steps
6) Now connect your phone, with portable media option selected in USB or the default mode. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in, only phone connected with USB). You will see for a shot time that charging icon will appear on phone and disappear; this will install something in the background again on your PC
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) go to system manager of your PC and look for MTK 6577 something ... something... driver
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the recovery option only in tool (TWRP / CMW / LEWA Whichever you like)
15) Click download
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
18) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
19) RED Bar -> Yellow Bar -> Green Ring
20) Disconnect
21) Reboot in recovery (TWRP / CMW / LEWA) is flashed...

video tutorial
apoorv.mehrotra said:
Hello All,
I tried both on window 7 & 8; 64 bit and procedure as mentioned by the OP is perfect; however i am posting it again here
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery which ever you like TWRP / CMW (I tried both of them now and they are working for me on MMX A110)
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device and repeat above steps
6) Now connect your phone, with portable media option selected in USB or the default mode. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in, only phone connected with USB). You will see for a shot time that charging icon will appear on phone and disappear; this will install something in the background again on your PC
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) go to system manager of your PC and look for MTK 6577 something ... something... driver
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the recovery option only in tool (TWRP / CMW / LEWA Whichever you like)
15) Click download
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
18) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
19) RED Bar -> Yellow Bar -> Green Ring
20) Disconnect
21) Reboot in recovery (TWRP / CMW / LEWA) is flashed...
Click to expand...
Click to collapse
Plz can anyone post video tutorial of installing this rom do favour

I've followed ALL the instructions word for word now and still can't get it to install the MT6577 drivers correctly. I've tried the OP's method as well as apoorv.mehrotra's method. Have rebooted my PC now 28 times! Still can't get it to work. I have exactly the same problem as everyone else - the phone appears in device manager for 3 seconds then disconnects suddenly. Even the legacy installation method does not work. I've tried on a Windows 7 64-bit machine as well as a Windows XP 32-bit machine - exactly the same outcome each time.
Help!

It worked on my windows 8 x64. To install these drivers you need to bypass driver signature enforcement. Follow the instructions at http://www.craftedge.com/tutorials/driver_install_windows8/driver_install_win8.html

[Q] sp flash tool and bin4ry..31 not working helpp

sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help

Sp flash tools have got no issues with window 8.
My friend also once faced the same issue and this is simply because of improper drivers installed.
Simply uninstall the drivers that are installed in your pc and then re-install using THIS THREAD ..:thumbup:

nt wrkng
hey sir thnkz for that thred
bt i wanna tl u that it is not first time that i root my canvas 2
it was breaked....
now it is updated with 4.1.1
i liku your rom bt m not able to install it
in ur thred in 5th step
at dubng when i remove battery and reanter it and at connect AT THAT TIME THERE IS A CONNECT TONE AND BEFORE SHOWING CHARGING THERE IS DISCONNECT TONE
i hate to wated 10-15 min. bt there are no driver install
bt now i hvn't disconnect my phone
and install all that 3 drivers
now in devis manager
there is this option
OTHER DEVICE > UNKNOWN DEVICE (yello)
no names of my my phone and not other....
what can i do
there is no name in in device manager
after switch off it is rendomly connect and disconnect in evry 2 seconds
i have done all ur processes step by steb
bt not working
any solution plzzzz
help

mynk28s said:
hey sir thnkz for that thred
bt i wanna tl u that it is not first time that i root my canvas 2
it was breaked....
now it is updated with 4.1.1
i liku your rom bt m not able to install it
in ur thred in 5th step
at dubng when i remove battery and reanter it and at connect AT THAT TIME THERE IS A CONNECT TONE AND BEFORE SHOWING CHARGING THERE IS DISCONNECT TONE
i hate to wated 10-15 min. bt there are no driver install
bt now i hvn't disconnect my phone
and install all that 3 drivers
now in devis manager
there is this option
OTHER DEVICE > UNKNOWN DEVICE (yello)
no names of my my phone and not other....
what can i do
there is no name in in device manager
after switch off it is rendomly connect and disconnect in evry 2 seconds
i have done all ur processes step by steb
bt not working
any solution plzzzz
help
Click to expand...
Click to collapse
FIRST HAVE YOU UN-INSTALLED ALL THOSE DRIVERS THAT ARE PREVIOUSLY INSTALLED IN YOUR PC?
AFTER UN-INSTALLING FOLLOW THE STEPS MENTIONED IN THAT THREAD.
AND SECOND...IF IN 5th STEP NO DRIVERS ARE BEING INSTALLED THEN SIMPLY JUMP TO 6th STEP.
OH YES...I FORGOT..
SIMPLY CONNECT YOUR PHONE IN SWITCH OF MODE AND PRESS AND HOLD THE VOLUME UP BUTTON.THIS WAY YOU WILL GET INTO META-MOD AND SP FLASH TOOLS WILL DETECT YOUR PHONE AND YOU WILL BE ABLE TO FLASH RECOVERY.
AND AS THIS PROBLEM IS RELATED TO DRIVERS ONLY.....IT IS SUPPOSED TO BE DISCUSSED IN THAT THREAD AND I DON'T THINK THERE IS A NEED FOR A SEPARATE THREAD. .......so it will be better to discuss in that thread and close this one.
hitting thanks is not charged by xda...so wanna try how it feels??

sir
mtk driver has no way to install
and no effect of volume up
as before

mynk28s said:
sir
mtk driver has no way to install
and no effect of volume up
as before
Click to expand...
Click to collapse
Sorry didn't got you : that mtk drivers has no way to install.
Simply download and install these-:
download and install the following drivers on ur pc.
VCOM DRIVERS
LINK: http://db.tt/ZKY7S9hw
MTK DRIVERS
LINK: http://db.tt/pQY576b7
CYNUS T2 DRIVERS
LINK: http://db.tt/oDLxs839
And then.. click on device manager(on the left).if ur device is listed under adb devices then u have successfully install drivers. But if it is listed with a yellow sign under unknown devices then right click on it. Select update drivers and locate to the folder c/program files/micromax
this folder includes drivers and that will be installed.
HOPE THIS TIME IT HELPS YOU.
don't mind..... i don't know why but i am thinking that you are going somewhere wrong.
Because that meta-mod should have worked.
But also there can be a hardware problem (though it's chances are very less)... So still to check that change your usb driver and also usb port.

mynk28s said:
sir
mtk driver has no way to install
and no effect of volume up
as before
Click to expand...
Click to collapse
well faced these issues too
if u are really out of all ur attempts
install team viewer and PM me your id , ill try to help ur cause

please provide me a backup file created by stock recovery
Hey sir
I rqst to u that can u provide me a rooted backup for stock recovera
It will aprox 126mb after backup by stock recovery
Nd it is the biggest solution for root without computer or other process just restore from stock recovery
Will u provide me a rooted backup please
Please
I'm wating
Please
After that i will install cwm recovery by mtk tool
Bt plz provide me a rooted backup

please provide me a backup file created by stock recovery
[/attach]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mynk28s said:
hey sir
i rqst to u that can u provide me a rooted backup for stock recovera
it will aprox 126mb after backup by stock recovery
nd it is the biggest solution for root without computer or other process just restore from stock recovery
will u provide me a rooted backup please
please
i'm wating
please
after that i will install cwm recovery by mtk tool
bt plz provide me a rooted backup
Click to expand...
Click to collapse

mynk28s said:
sir
mtk driver has no way to install
and no effect of volume up
as before
Click to expand...
Click to collapse
Create a new windows user with admin privileges and connect the phone and install drivers. After drivers are installed please use spflash tool. It will work.
Sent from my Micromax A116 using xda premium

okay, first thing you need to do to install vcom drivers is to disable the mandatory digital signature enforcement in windows 8.
(Yeah this is a stupid thing msft started with windows 8, the VCOM drivers are not digitally signed so windows won't install even if you have admin rights.)
Step 1. Go to the right bottom corner of the desktop and wait for the side menu to appear. When it’s there click on the gear icon with the title “Settings”.
Step 2. Now click on the entry “More PC Settings”, then click on the entry “General”.
Step 4. Scroll down to “Restart now” (under “Advanced start up ”) and click it.
Step 5. Wait a bit for a menu.
Step 6. Now click “Troubleshoot”, then “Advanced Options” and after that click “Windows Start up Settings”.
Disable the digital signature enforcement and boot onto windows.
To install vcom drivers, right click the file(64bit or 32 bit) and select install.
As for the bin4ry tool, it doesn't work on jellybean for rooting. You need to install custom recovery and flash the supersu zip file.
Hope it helps.

mynk28s said:
sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help
Click to expand...
Click to collapse
buddy if it is jb 4.1.1 it is to be rooted with cwm mode.....u hav to install cwm through sp tools
n install super su

sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help
Click to expand...
Click to collapse
hey dude check out this vid for rooting: https://www.youtube.com/watch?v=vbIMvSFUqKM

mynk28s said:
sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help
Click to expand...
Click to collapse
i too faced same problem and it is because of improper drivers for 64bit windows8.i tried almost all deivers listed in xda but not succeed so i suggest my friend avoid Windows8 64bit and try different windows operating system & i am 101% sure you will succeed.:fingers-crossed:
Hit thanks only if you Succeed:angel:

drivers are installed bt again rendomly disconnect at switch off
hey sir
I had to tried the process in windows xp
and i had sucessfully installed drivers in pc
and my mobile is also shows in adb devices
bt again there is same problem that at switchoff condition and at remove battery it is rendomly connect and disconnect bt i had installed all drivers
now what is problem with my phone
again sp n bin4ry not working
hlp brooooooooooooooo

again after installed drivers
hey sir
I had to tried the process in windows xp
and i had sucessfully installed drivers in pc
and my mobile is also shows in adb devices
bt again there is same problem that at switchoff condition and at remove battery it is rendomly connect and disconnect bt i had installed all drivers
now what is problem with my phone
again sp n bin4ry not working
hlp brooooooooooooooo

I too faced this problem once when i had bought a new canvas...but it was soon solved by installing drivers.
But your case is damn different.
Here i see no solution....
And please don't flood the inbox with same messages buddy.
I have a busy schedule these days and don't get enough time for xda.

If bootloader is locked then in any case your phone won't brick.
-download drivers or install by connecting your phone
-connect phone & start SP tool (without bettry)
-start download on flashtool after loading scatter file
-insert bettry
Hit thanks ,it doesn't cost anything