i had it s-off with moonshine
and after updating to this rom
ROM: BOOST_htc-k2_cl-jellybeanOTA4_1_2-20130712-simon.zip
mobile keeps restarting
i tried to get back to the one installed before
matlevo 12 but no use
even flashed it with the boot.img inside its zip
tried so many roms with different recoveries and again the same problem
it starts for a short while and then restarting over and over
sometimes it goes black i can only see the network signal and the battery and nothing else
any suggestion please ?????????????
leosparta said:
i had it s-off with moonshine
and after updating to this rom
ROM: BOOST_htc-k2_cl-jellybeanOTA4_1_2-20130712-simon.zip
mobile keeps restarting
i tried to get back to the one installed before
matlevo 12 but no use
even flashed it with the boot.img inside its zip
tried so many roms with different recoveries and again the same problem
it starts for a short while and then restarting over and over
sometimes it goes black i can only see the network signal and the battery and nothing else
any suggestion please ?????????????
Click to expand...
Click to collapse
In CWM are you wiping data/factory, cache, delvik cache before flashing? And fixing permissions after flash.
Yes I did
El Queson said:
In CWM are you wiping data/factory, cache, delvik cache before flashing? And fixing permissions after flash.
Click to expand...
Click to collapse
Yes I did that, but it turned out that flashing it with that rom also flashed the radio
so what i did was i flashed the radio
and now it works
you guys are amazing thanks a bunch.
Related
My ChaCha is stuck at HTC boot screen. i have done factory reset, battery pulls and installing ROMS to no avail. I keep getting errors while trying to install the stock ROMS. Am I going about it the right way, trying to find ROMs or Is there something else I can do to solve this problem.
dagbula said:
My ChaCha is stuck at HTC boot screen. i have done factory reset, battery pulls and installing ROMS to no avail. I keep getting errors while trying to install the stock ROMS. Am I going about it the right way, trying to find ROMs or Is there something else I can do to solve this problem.
Click to expand...
Click to collapse
do you have root? and have recovery? if yes then go there and delete dalvik, delete cache and try factory reset
petulikt said:
do you have root? and have recovery? if yes then go there and delete dalvik, delete cache and try factory reset
Click to expand...
Click to collapse
Yes, I have root and can boot to recovery. I already tried clearing the dalvik cache and factory reset. i also restored from a Nandroid backup, all this to no avail. The boot loop problem still persist.
i also tried flashing ROM but all the ROMs i got gives one error or the other. I really need help.
dagbula said:
i also tried flashing ROM but all the ROMs i got gives one error or the other. I really need help.
Click to expand...
Click to collapse
Have you tried flashing an official RUU 1.33 with a goldcard?
Did you find a solution ?
i am having the same problem
ZaSa 4 chacha ROM saved me from the trouble check here http://forum.xda-developers.com/showthread.php?t=1343636
First of all I'm new to this forum.I've not find any specific ans to my issue so I'm creating this thread.I've installed custom ROM Oxygen,Franco Kernel to my LGp500 through clockwork MOD recovery.It was working perfectly.
Now the prob is that with my over enthusiasm of flashing and testing new things.I've flashed the same ROM thrice and kernel twice(such an idiot I'm).Now My Phone has become unresponsive or bricked(in tech jargon).When I switch on the phone Its showing LG logo but after that it freezes out there,No key is working,nothing is booting,I've tried several time but it ends up same thing.So to end up the process I was removing battery everytime. Though with power+home+vol(-) clockworkmod working fine.
PLz plz help..I've no other phone to use..
Clear your cache, davlik (in advanced) and then try again.
NanoNoodle said:
Clear your cache, davlik (in advanced) and then try again.
Click to expand...
Click to collapse
tried,Its not working.
Good people plz help.
ib0rg said:
Good people plz help.
Click to expand...
Click to collapse
Do you have a nandroid to restore from? If you don't, try wiping everything (data, cache, and dalvik) and just flash the ROM, and reboot.
It sounds like you've soft bricked your phone and i've done it many times myself. Simple fix, just clear all cache, format everything and do a fresh flash of rom.
I don't see that you have answered yet. Did you get it to boot after clearing data as well?
Sent from my LG-P500 using XDA
mrcorey said:
I don't see that you have answered yet. Did you get it to boot after clearing data as well?
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
I've cleared everything (data,cache and dalvik) through clockwork mod,Then tried to boot,Its not booting.
I've no Nandroid backup.
Today I'll do a fresh flash after clearing everything,then I'l try to reboot.Lets see what happened.
Thanks its working after fresh install.
Glad to see its working now, make sure to do a nandroid backup incase you break something again
I unlocked my bootloader, installed twrp recovery, and rooted obviously. I then backed up and installed the 9-6-12 build of CM10 nightlies for Evo lte from http://forum.xda-developers.com/showthread.php?t=1851912
Before installing I did a factory reset/wiped caches,
Now it boots up and gets past the HTC logo but then it just goes to a backlit black screen indefinitely. I left it for 30 minutes in case it was just booting really slowly.
Does anyone know what could be going on? I really want to try CM10.
I will give so many thanks to anyone who helps!
hockey22man said:
I unlocked my bootloader, installed twrp recovery, and rooted obviously. I then backed up and installed the 9-6-12 build of CM10 nightlies for Evo lte from http://forum.xda-developers.com/showthread.php?t=1851912
Before installing I did a factory reset/wiped caches,
Now it boots up and gets past the HTC logo but then it just goes to a backlit black screen indefinitely. I left it for 30 minutes in case it was just booting really slowly.
Does anyone know what could be going on? I really want to try CM10.
I will give so many thanks to anyone who helps!
Click to expand...
Click to collapse
Try another clean install. You could also try wiping the dalvik cache after flashing (before rebooting).
Theonew said:
Try another clean install. You could also try wiping the dalvik cache after flashing (before rebooting).
Click to expand...
Click to collapse
I will do another clean install to try again, but I tried multiple times last night. Each time I wiped Dalvik and regular cache...
hockey22man said:
I will do another clean install to try again, but I tried multiple times last night. Each time I wiped Dalvik and regular cache...
Click to expand...
Click to collapse
You could try flashing with a different recovery (if available for your device).
Theonew said:
You could try flashing with a different recovery (if available for your device).
Click to expand...
Click to collapse
I don't know why it would be a recovery problem but I guess I could try it if all else fails. You both get some thanks for help =)
hockey22man said:
I don't know why it would be a recovery problem but I guess I could try it if all else fails. You both get some thanks for help =)
Click to expand...
Click to collapse
We "both" are the same person .
Theonew said:
We "both" are the same person .
Click to expand...
Click to collapse
Ah didn't look closely.
Still not working though. I tried both suggestions. Any other ideas people?
Hi all,
Over the past few days I have been using this splendid ROM, however something went wrong during the flashing of the ROM or I missed something, because all of my apps keep crashing and my stock browser app crashes everytime I use it. And I also get random reboots. I think it's the boot.img, but i'm tired of trying
I installed this rom in the Following order:
1. Wipe cache
2. Factory reset
3. Wipe dalvik cache
4. Flash the ROM
5. Rebooted into fastboot
6. Fasboot flash boot boot.img
And I also tried it in this order:
1. Fasboot flash boot boot.img
2. Wipe cache
3. Factory reset
4. Wipe dalvik cache
5. Flash the ROM
6. Reboot
What am I doing wrong here?
----------------------------------------------------------------
Adding some extra info just incase:
I came from stock sense 4.1+ android 4.1.1
Current device info:
UNLOCKED
S-ON
Hboot version 2.15.0000
Radio 1.11.50.05.28
I also tried redownloading the zip, but got the same result
At last i'm wondering if there are any specific kernels available for this ROM, and which 1 you guys recommend.
Thanks in advance!
In TWRP you want to factory reset then wipe system and then flash the rom and see if that works for you.
Darknites said:
In TWRP you want to factory reset then wipe system and then flash the rom and see if that works for you.
Click to expand...
Click to collapse
Ok ty, will try and see if that will sort it all out
Sadly, same story... :crying::crying::crying::crying: Is installation of the rom supposed to happen in 30 seconds?
Boyyoka said:
Sadly, same story... :crying::crying::crying::crying: Is installation of the rom supposed to happen in 30 seconds?
Click to expand...
Click to collapse
Em not sure but sounds a bit to quick. Get yourself 2.3.3.0 of TWRP and try with that and if its still being quick then do the wipes like I said but reboot but back into the recovery then flash the rom.
nevermind cheered too early... Seriously something is corrupting my phone
Maybe you have a bad download, try redownloading and flash.
I'll try to remember the steps of what happened as best I can.
T989 All Stock Running Gingerbread (Not sure what Firmware)
1)Installed CWM via ODIN
2)nstalled SuperUser via CWM
3)Installed latest AOKP from here http://aokp.co/devices/hercules
Booted up just fine but two problems
1: No Service
2: Touch screen calibration was WAY OFF
BYAM DURP OOPS
Realized that I needed to get the latest Firmware before flashing the latest AOKP!
4)Full Wipe(I think?)
5)Install latest Firmware (T989UVMC6, right?) (Also did a factory reset/wipe)
Phone boots into Stock with latest firmware, however the touch screen is still calibrated way off!
Do steps 1-3 above again.
Touch screen calibration is still way off!
My only guess on the reason/fix for this is that maybe this is still some lingering problem of flashing the ROM on the outdated firmware, so I need to perform some sort of deeper wipe than just a Full Wipe via ClockWorkMod in order to get rid of any lingering problems. And then flash the latest firmware, and do steps 1-3 above.
Any ideas or suggestions?
Any other information needed?
Thanks in advance!
YoHoJo said:
I'll try to remember the steps of what happened as best I can.
T989 All Stock Running Gingerbread (Not sure what Firmware)
1)Installed CWM via ODIN
2)nstalled SuperUser via CWM
3)Installed latest AOKP from here http://aokp.co/devices/hercules
Booted up just fine but two problems
1: No Service
2: Touch screen calibration was WAY OFF
BYAM DURP OOPS
Realized that I needed to get the latest Firmware before flashing the latest AOKP!
4)Full Wipe(I think?)
5)Install latest Firmware (T989UVMC6, right?) (Also did a factory reset/wipe)
Phone boots into Stock with latest firmware, however the touch screen is still calibrated way off!
Do steps 1-3 above again.
Touch screen calibration is still way off!
My only guess on the reason/fix for this is that maybe this is still some lingering problem of flashing the ROM on the outdated firmware, so I need to perform some sort of deeper wipe than just a Full Wipe via ClockWorkMod in order to get rid of any lingering problems. And then flash the latest firmware, and do steps 1-3 above.
Any ideas or suggestions?
Any other information needed?
Thanks in advance!
Click to expand...
Click to collapse
wipe /system
didn't work??
prantoroy said:
wipe /system
didn't work??
Click to expand...
Click to collapse
I've done wipes like this
Via CWM I do the Factory Reset/Full wipe, then cache and dalvik cache.
Is there a way to more deeply wipe?
I saw in some other places that you can mount some locations and also wipe those too, I assume maybe doing that will result in a "fuller" wipe and also wipe the firmware too?
Care to explain exactly how I should be wiping?
Also after doing the wipe, do I just flash latest firmware, install CWM/root, and then a ROM?
Thanks
YoHoJo said:
I've done wipes like this
Via CWM I do the Factory Reset/Full wipe, then cache and dalvik cache.
Is there a way to more deeply wipe?
I saw in some other places that you can mount some locations and also wipe those too, I assume maybe doing that will result in a "fuller" wipe and also wipe the firmware too?
Care to explain exactly how I should be wiping?
Also after doing the wipe, do I just flash latest firmware, install CWM/root, and then a ROM?
Thanks
Click to expand...
Click to collapse
First,
Go to CWM
and go to mounts&stroage
then format everything except /sdcard
.
.
then flash latest Firmware.
then do whatever u like
like root,cwm or flash custom rom
prantoroy said:
First,
Go to CWM
and go to mounts&stroage
then format everything except /sdcard
.
.
then flash latest Firmware.
then do whatever u like
like root,cwm or flash custom rom
Click to expand...
Click to collapse
So without a doubt I can wipe/format everything except SD Card and just flash a firmware via ODIN and be just fine?
Just double checking because it sounds scary to wipe/format so many things!
YoHoJo said:
So without a doubt I can wipe/format everything except SD Card and just flash a firmware via ODIN and be just fine?
Just double checking because it sounds scary to wipe/format so many things!
Click to expand...
Click to collapse
no.its fine.
I do it everytime I flash a rom
prantoroy said:
no.its fine.
I do it everytime I flash a rom
Click to expand...
Click to collapse
Formatted data, system, cache, and emmc.
Did Factory Wipe/Reset, Wiped cache and Dalvik cache.
Used ODIN to flash T989UVMC6, and still the touch screen is not calibrated properly.
However (I've seen other people report that problem but haven't seen a fix) when the phone is plugged in, it works just fine, but whenever it is unplugged the touch screen very unusable due to being calibrated so wrong. :/ After wiping and formatting everything and flashing a stock Firmware I'm all out of hope now!
YoHoJo said:
Formatted data, system, cache, and emmc.
Did Factory Wipe/Reset, Wiped cache and Dalvik cache.
Used ODIN to flash T989UVMC6, and still the touch screen is not calibrated properly.
However (I've seen other people report that problem but haven't seen a fix) when the phone is plugged in, it works just fine, but whenever it is unplugged the touch screen very unusable due to being calibrated so wrong. :/ After wiping and formatting everything and flashing a stock Firmware I'm all out of hope now!
Click to expand...
Click to collapse
Me TOO
sorry unable to help
Bump
YoHoJo said:
Bump
Click to expand...
Click to collapse
Try using this app. It may help you. Worked for me!
play.google.com/store/apps/details?id=br.shop4apps.touchscreenbooster.com
My Oukitel's k4000 Touch Screen Calibration Messed Up After Flashing ROM on Wrong ROM
Hello,
Please help me. I tried to see if a ROM for 'Oukitel k4000 pro' could fit 'Oukitel k4000'.
Since it didn't work out, I flashed back to the original ROM of 'Oukitel k4000', but since then, my screen behaves wrongly to touches.
Could anyone faced and managed to beat this issue?
I saw several different posts on the net, but none of them actually helped me.
One more thing:
Please try to explain, as if you explaining a child, since my android experience is not that vast to follow all the shortcuts and proffecional terms.
Thank you,
Michael