Database Info

miui and CM7 keeps cycling the inital loading

hi all,
Ok, I'm new to this stuff.
1. used the simple root and it worked great.
2. I then flashed CM7 and it worked great except market was not on it.
3. I downloaded and flashed gapps-hdpi-20101114-signed.zip by mistake, not realizing I had to use another gapps.
4. After I flashed it, the cm7 and android setup screens kept cycling between each other.
5. I restored to clockworkmod (sp) and then deleted the gapps and tried to then flash cm7. It didn't cycle between cm7 and android setup, but the cm7 screens kept cycling and never got past that.
6. I thought perhaps it was just cm7 now, so I tried miui and it's doing the same thing. It's cycling between the gingerbread man and MIUI with the status bar and won't do anything else.
Very frustrated. what have I done and how do I fix it?
Thanks folks,
Brett

I believe that those ROMs both require ENG S-OFF. Open simple root on your computer, click Fixes, then apply the fix there. Also, did you make sure you cleared your Dalvik cache before flashing? Always do a factory reset AND clear dalvik cache when changing ROMs.

make sure you have wifi off in your first boot

ardynine said:
make sure you have wifi off in your first boot
Click to expand...
Click to collapse
From reading the first post, he got in, rebooted to flash gapps and ended up in bootloop afterwards

EtherealRemnant said:
From reading the first post, he got in, rebooted to flash gapps and ended up in bootloop afterwards
Click to expand...
Click to collapse
Thanks ER. I'll try your method this evening.
I'll report back.
thanks!
brett

EtherealRemnant said:
I believe that those ROMs both require ENG S-OFF.
Click to expand...
Click to collapse
I can say with no doubt whatsoever, no.

id10terrordfw said:
I can say with no doubt whatsoever, no.
Click to expand...
Click to collapse
any suggestions then???????

I tried doing the ENG-off and still the same hang up on the front screen.
Any help please?
thanks,
brett

what method do you use to flash cm7? what exactly do you do.
to clarify what is your exact process for flashing the rom?

mudknot2005 said:
what method do you use to flash cm7? what exactly do you do.
Click to expand...
Click to collapse
Hi. Thanks.
I use rom manager to boot to recovery. Then I install zip from sd card. I go through the process until it says reboot. It's when I reboot that I get stuck in the bootloop. It just cycles from the CM7 circular arrow to blank and then to the arrow thing again. MIUI does the same between the gingerbread guy and the status bar and back.
I then take the battery out, take out the sdcard, down volume & power, reinsert sdcard and do a restore so I can use my phone again in clockworkmod 3.0.0.6.
thanks,
brett

sounds like your forgetting to do a full wipe/factory reset, wipe cache, and wipe dalvik..

mudknot2005 said:
sounds like your forgetting to do a full wipe/factory reset, wipe cache, and wipe dalvik..
Click to expand...
Click to collapse
actually, I did that.
it's weird. I restored a few times, did the above you suggested, and still in a loop. The first time I installed CM7 it was great, then the gapps thing seems to have screwed it up.
I'm lost.
brett

bdws1975 said:
actually, I did that.
it's weird. I restored a few times, did the above you suggested, and still in a loop. The first time I installed CM7 it was great, then the gapps thing seems to have screwed it up.
I'm lost.
brett
Click to expand...
Click to collapse
Probably a silly question but you're doing full reinstalls, right? Not using a nandroid backup? I can't think of any reason that you should be boot looping permanently from flashing the gapps if you're going into clockwork, doing a factory reset, wiping the cache, then wiping the Dalvik cache, then flashing the ROM.

EtherealRemnant said:
Probably a silly question but you're doing full reinstalls, right? Not using a nandroid backup? I can't think of any reason that you should be boot looping permanently from flashing the gapps if you're going into clockwork, doing a factory reset, wiping the cache, then wiping the Dalvik cache, then flashing the ROM.
Click to expand...
Click to collapse
hmm. I'm a little new to this, but I'm using the backup/restore option in recovery mode and am then flashing one of the backups. Could that be the problem?
If it is, how do I do a full reinstall?
thanks again for your help,
brett

mudknot2005 said:
sounds like your forgetting to do a full wipe/factory reset, wipe cache, and wipe dalvik..
Click to expand...
Click to collapse
Without a full wipe I thought it would just bootloop?
Do a full wipe then reinstall cm7 and gapps.
Sent from my HTC Inspire 4G running CyanogenMod 7 using Tapatalk.

bdws1975 said:
hmm. I'm a little new to this, but I'm using the backup/restore option in recovery mode and am then flashing one of the backups. Could that be the problem?
If it is, how do I do a full reinstall?
thanks again for your help,
brett
Click to expand...
Click to collapse
That's your problem right there. If you make a backup of a busted ROM, its still going to be busted when you restore it.
Do the factory reset, then clear the cache again just to make sure, go to advanced and clear Dalvik, then go to the main menu and use the choose install zip from sdcard option, then choose "choose zip from sdcard", find the ROM zip file and select it, then say yes to the flash and reboot when its done. If you are flashing CM7, make sure that you flash the correct gapps package after you flash the ROM or the ROM won't be very useful.

EtherealRemnant said:
That's your problem right there. If you make a backup of a busted ROM, its still going to be busted when you restore it.
Do the factory reset, then clear the cache again just to make sure, go to advanced and clear Dalvik, then go to the main menu and use the choose install zip from sdcard option, then choose "choose zip from sdcard", find the ROM zip file and select it, then say yes to the flash and reboot when its done. If you are flashing CM7, make sure that you flash the correct gapps package after you flash the ROM or the ROM won't be very useful.
Click to expand...
Click to collapse
I'll give it a shot and then get back to you.
I do believe, however, that the restore I'm doing is the backup I did right before I did the original cm7 flash. I'll try.
thanks!

If you toggle wifi on after the first boot it goes into a bootloop. This is a know bug not a hunch.

EtherealRemnant said:
That's your problem right there. If you make a backup of a busted ROM, its still going to be busted when you restore it.
Do the factory reset, then clear the cache again just to make sure, go to advanced and clear Dalvik, then go to the main menu and use the choose install zip from sdcard option, then choose "choose zip from sdcard", find the ROM zip file and select it, then say yes to the flash and reboot when its done. If you are flashing CM7, make sure that you flash the correct gapps package after you flash the ROM or the ROM won't be very useful.
Click to expand...
Click to collapse
DUDE!!!! You freaking rock. I got it!
I installed MIUI and it's amazing. Thank you very much.
Brett

Mustang302LX said:
Without a full wipe I thought it would just bootloop?
Do a full wipe then reinstall cm7 and gapps.
Sent from my HTC Inspire 4G running CyanogenMod 7 using Tapatalk.
Click to expand...
Click to collapse
thank you!!!!! I really appreciate your help!

[Q] Stuck on bootscreen after flashing [JB]Unoffical MIUI 2.9.14 Skyrocket[PORT]

Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!

shentheory said:
Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!
Click to expand...
Click to collapse
Couple things.... did u format data/system? Also what recovery are u using?

Deliberate said:
Couple things.... did u format data/system? Also what recovery are u using?
Click to expand...
Click to collapse
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!

shentheory said:
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!
Click to expand...
Click to collapse
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!

Deliberate said:
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!
Click to expand...
Click to collapse
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?

shentheory said:
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?
Click to expand...
Click to collapse
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.

Can you boot into recovery or not? If you can, just flash the rom. If you can't, yank the battery, replace it. Then, hold down both volume buttons, the press the power button, release all the buttons, you should be able to get into recovery.

Deliberate said:
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.
Click to expand...
Click to collapse
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!

You'll have to use odin, and reroot your phone.

Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.

shentheory said:
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!
Click to expand...
Click to collapse
I had the same problem, but while my phone was stuck on the MIUI boot screen i pulled the batter, got into recovery again and simply did a factory data reset just once and then it booted up, but my issue is that i get no data at all no mater what version of MIUI I try to flash.

mimart7 said:
You'll have to use odin, and reroot your phone.
Click to expand...
Click to collapse
Even if my stock rom is already rooted? I'm not against trying it, I'm just curious to how that could affect it. Thanks for your help!
hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
I will do this and update when I do, Thanks for your help!

hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
Ya I agree try downloading it again. Check the md5 and flash that ROM again. If it doesn't work your gonna have to Odin!

There were a lot of complaints of boot loops when flashing, so I pulled the DL link. I actually stopped using miui and moved back to CM or AOKP, depending on which one is most stable at the moment. Every once in a while I give miui a try, but I never stick with it. If you want miui, I suggest you follow Lithium's thread. His version is the officially supported miui rom.

I can confirm heres what i did to fix i had the boot loop.. all i did was run DARKSIDE Superwipe x2 Times. Then i installed MIUI Rom. Then i Factory Reset. Try booting wait a little bit. If still not going threw remove battery and boot to recovery and factory reset one more time then reboot. So once again.
1. DARKSIDE SUPERWIPE x2++ 2. Install MIUI Rom. 3. Factory Reset. 4. Boot. 5. (If still looping) Remove battery Then recovery. and Factory Reset and boot again. Your welcome

Can we move this to q and a?
Sent from my XT894 using Tapatalk 2

[Q] Every ROM hangs at startup screen

Flashed several ROMS in my life and have not always wiped all data. Mainly i do dalvik and cache. My phones have always work. Now i have a Razr HD with an unlocked BL with TWRP loaded. I cant seem to get past the initial bootup screen no matter what ROM i flash. What am i missing here guys? Do i need to check the "factory reset" in TWRP along with Dalvik, system and cache?

famac! said:
Flashed several ROMS in my life and have not always wiped all data. Mainly i do dalvik and cache. My phones have always work. Now i have a Razr HD with an unlocked BL with TWRP loaded. I cant seem to get past the initial bootup screen no matter what ROM i flash. What am i missing here guys? Do i need to check the "factory reset" in TWRP along with Dalvik, system and cache?
Click to expand...
Click to collapse
answered here http://forum.xda-developers.com/showthread.php?t=2465695

bweN diorD said:
answered here http://forum.xda-developers.com/showthread.php?t=2465695
Click to expand...
Click to collapse
Not really. The majority of ROMS in question have been 4.2.2 based....

famac! said:
Not really. The majority of ROMS in question have been 4.2.2 based....
Click to expand...
Click to collapse
quote from post 11
"By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot"

bweN diorD said:
quote from post 11
"By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot"
Click to expand...
Click to collapse
Please explain this further to me. My problem is with 4.2.2 ROMS. The fix above is for folks having issues with 4.3 ROMS. Are you suggesting that doing this will also fix my 4.2.2 problems? This is also CWM while i run TWRP. I did a quick look and the two are setup a little difference. I played around with those highlighted instructions and almost accidentally wiped my only backup of my previous state. I actually thought i was toast but somehow i reloaded and went back to my old backup state.

famac! said:
Please explain this further to me. My problem is with 4.2.2 ROMS. The fix above is for folks having issues with 4.3 ROMS. Are you suggesting that doing this will also fix my 4.2.2 problems? This is also CWM while i run TWRP. I did a quick look and the two are setup a little difference. I played around with those highlighted instructions and almost accidentally wiped my only backup of my previous state. I actually thought i was toast but somehow i reloaded and went back to my old backup state.
Click to expand...
Click to collapse
i could be wrong, but in my opinion having the exact same issue even though its a different version, one of the 2 fixes in that thread should work.
the first fix likely doesn't directly apply although i suggest you ensure you have the latest version of your recovery of choice found here http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
second fix (backup ALL data you don't want to loose first as noted above), then do a full wipe as listed above, not just a fdr that doesn't wipe everything on the internal card.
the problem at this point is, you are assuming it wont work because of version differences, i am assuming it will. until you try it, i don't see any point in exploring other options, if there are any.

Dirty flashing when you go to different ROMs is generally not a good idea. Even on 4.2.2, it leaves residual data behind. There's a reason that the devs talk about doing complete wipes in their ROM threads, and there's a reason that they tell you not to talk about bugs unless you use their install directions.

RikRong said:
Dirty flashing when you go to different ROMs is generally not a good idea. Even on 4.2.2, it leaves residual data behind. There's a reason that the devs talk about doing complete wipes in their ROM threads, and there's a reason that they tell you not to talk about bugs unless you use their install directions.
Click to expand...
Click to collapse
Yeah, i am straight now. Did a full wipe and sailed right past the startup animation. Thanks all.

famac! said:
Yeah, i am straight now. Did a full wipe and sailed right past the startup animation. Thanks all.
Click to expand...
Click to collapse
Nice! Glad to see you got it working.

Bootloop in custom roms

Hi everybody
I have a X1032 model. I'm having a problem flashing custom roms. I'm on stock 4.4.2. I unlocked my bootloader and installed cwm with fastboot " CWM-swipe-6.0.4.7-falcon.img". After that i rooted my phone with some supersu.zip file that i had to flash in cwm. So i have bootloader unlocked and a rooted device. Downloaded C-rom 4.4.3, wiped data/factory reset, wiped chache, and in mounts and storage i wiped /system. After that i flashed C-rom 4.4.3 succesfully but when i reboot the phone its stuck on a bootloop and i can't see why. I've tried it 3 times with no luck and even an older version of it, i tried cm11 4.4.3 but same no luck i tried waiting 20 minutes but it didnt help. Am i doing something wrong? or did i miss a step or something?
These are the roms i tried to flash:
http://forum.xda-developers.com/showthread.php?t=2608377
http://forum.xda-developers.com/showthread.php?t=2713871
If you can help me please do thanks in regards.

Have you wiped cache? I'm not sure but wiping cache sometimes helps.
You may try Philz touch recovery, too. It can clean the phone to install a new rom, so it may solve your problem if you forgot to wipe a partition.
edit: Sorry, you said you wiped cache, missed it. You can still try another recovery I think. Don't know why but trying another recovery sometimes help. (I saved myself once, but may be just coincidence)

dont wipe the system!
hamid1158 said:
Hi everybody
I have a X1032 model. I'm having a problem flashing custom roms. I'm on stock 4.4.2. I unlocked my bootloader and installed cwm with fastboot " CWM-swipe-6.0.4.7-falcon.img". After that i rooted my phone with some supersu.zip file that i had to flash in cwm. So i have bootloader unlocked and a rooted device. Downloaded C-rom 4.4.3, wiped data/factory reset, wiped chache, and in mounts and storage i wiped /system. After that i flashed C-rom 4.4.3 succesfully but when i reboot the phone its stuck on a bootloop and i can't see why. I've tried it 3 times with no luck and even an older version of it, i tried cm11 4.4.3 but same no luck i tried waiting 20 minutes but it didnt help. Am i doing something wrong? or did i miss a step or something?
These are the roms i tried to flash:
http://forum.xda-developers.com/showthread.php?t=2608377
http://forum.xda-developers.com/showthread.php?t=2713871
If you can help me please do thanks in regards.
Click to expand...
Click to collapse
Just stop wiping the system and it will work fine.
i've used cyanogen wiki to install one.

tansly said:
Have you wiped cache? I'm not sure but wiping cache sometimes helps.
You may try Philz touch recovery, too. It can clean the phone to install a new rom, so it may solve your problem if you forgot to wipe a partition.
edit: Sorry, you said you wiped cache, missed it. You can still try another recovery I think. Don't know why but trying another recovery sometimes help. (I saved myself once, but may be just coincidence)
Click to expand...
Click to collapse
Thanks for your fast reply i'll try to flash philz recovery now and i'll see if it works. Got my fingers crossed

Ravin89 said:
Just stop wiping the system and it will work fine.
i've used cyanogen wiki to install one.
Click to expand...
Click to collapse
Thanks ill try this time without wiping system

tansly said:
Have you wiped cache? I'm not sure but wiping cache sometimes helps.
You may try Philz touch recovery, too. It can clean the phone to install a new rom, so it may solve your problem if you forgot to wipe a partition.
edit: Sorry, you said you wiped cache, missed it. You can still try another recovery I think. Don't know why but trying another recovery sometimes help. (I saved myself once, but may be just coincidence)
Click to expand...
Click to collapse
A big thanks it worked i used Philz Touch recovey and it worked thanks

For my information, did you still wipe /system or not?

SbM_ said:
For my information, did you still wipe /system or not?
Click to expand...
Click to collapse
No i didnt what i did is install Philz recovery here
http://forum.xda-developers.com/showthread.php?t=2201860
Go to downlaod Home and search for falcon and look for this one
philz_touch_6.43.8-falcon.zip
download it and put it on your phone and just flash it
then go to wipe data/factory reset you'll get an option to wipe for installing a rom choose that
after its done just flash your rom
it worked at the first time i did it

[Q] Failed upgrade - now soft bricked

Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim

sheltont said:
Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim
Click to expand...
Click to collapse
Use Odin to restore to the stock ROM. Download the stock rom from samfirmware.com and flash it in Odin as PDA. Then, use the latest recovery (either TWRP, CWM, OR PhilZ) from @Android-Andi's recovery thread in the Dev section. You should now be able to flash any ROM you want to. Make sure you do a backup and a wipe system, cache, Dalvik, data, and android secure (if it's an option.)
Sent from my SGH-T989

thanks and....
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?

sheltont said:
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?
Click to expand...
Click to collapse
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989

yep
jrc2 said:
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989
Click to expand...
Click to collapse
Yes, I did twice and it's still hung after apparent success installation according to Odin. I've tried it twice.

No success
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim

sheltont said:
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim
Click to expand...
Click to collapse
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989

good idea but still no success....
jrc2 said:
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989
Click to expand...
Click to collapse
Hi, I've retried all that this morning-i must admit that I didn't know about wiping cache after install, however it's not made any difference, and still hangs on first boot...
Any other ideas? Thanks for all your help.

Happy success
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim

sheltont said:
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim
Click to expand...
Click to collapse
Which version of PhilZ? And I have found that TWRP 2.7.1.0 works better than other versions for KK.
Sent from my SGH-T989

Use latest Philz touch recovery. And use the rom and gapps compatible to your tab. Don't forget to reset to factory setting, clear cache and wipe dalvic cache before flashing the rom and gapps ☺
Sent from my GT-P3100 using XDA Free mobile app