Database Info

[Q] Stuck on bootscreen after flashing [JB]Unoffical MIUI 2.9.14 Skyrocket[PORT]

Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!

shentheory said:
Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!
Click to expand...
Click to collapse
Couple things.... did u format data/system? Also what recovery are u using?

Deliberate said:
Couple things.... did u format data/system? Also what recovery are u using?
Click to expand...
Click to collapse
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!

shentheory said:
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!
Click to expand...
Click to collapse
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!

Deliberate said:
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!
Click to expand...
Click to collapse
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?

shentheory said:
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?
Click to expand...
Click to collapse
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.

Can you boot into recovery or not? If you can, just flash the rom. If you can't, yank the battery, replace it. Then, hold down both volume buttons, the press the power button, release all the buttons, you should be able to get into recovery.

Deliberate said:
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.
Click to expand...
Click to collapse
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!

You'll have to use odin, and reroot your phone.

Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.

shentheory said:
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!
Click to expand...
Click to collapse
I had the same problem, but while my phone was stuck on the MIUI boot screen i pulled the batter, got into recovery again and simply did a factory data reset just once and then it booted up, but my issue is that i get no data at all no mater what version of MIUI I try to flash.

mimart7 said:
You'll have to use odin, and reroot your phone.
Click to expand...
Click to collapse
Even if my stock rom is already rooted? I'm not against trying it, I'm just curious to how that could affect it. Thanks for your help!
hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
I will do this and update when I do, Thanks for your help!

hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
Ya I agree try downloading it again. Check the md5 and flash that ROM again. If it doesn't work your gonna have to Odin!

There were a lot of complaints of boot loops when flashing, so I pulled the DL link. I actually stopped using miui and moved back to CM or AOKP, depending on which one is most stable at the moment. Every once in a while I give miui a try, but I never stick with it. If you want miui, I suggest you follow Lithium's thread. His version is the officially supported miui rom.

I can confirm heres what i did to fix i had the boot loop.. all i did was run DARKSIDE Superwipe x2 Times. Then i installed MIUI Rom. Then i Factory Reset. Try booting wait a little bit. If still not going threw remove battery and boot to recovery and factory reset one more time then reboot. So once again.
1. DARKSIDE SUPERWIPE x2++ 2. Install MIUI Rom. 3. Factory Reset. 4. Boot. 5. (If still looping) Remove battery Then recovery. and Factory Reset and boot again. Your welcome

Can we move this to q and a?
Sent from my XT894 using Tapatalk 2

Touch Screen Calibration Messed Up After Flashing ROM on Wrong Firmware

I'll try to remember the steps of what happened as best I can.
T989 All Stock Running Gingerbread (Not sure what Firmware)
1)Installed CWM via ODIN
2)nstalled SuperUser via CWM
3)Installed latest AOKP from here http://aokp.co/devices/hercules
Booted up just fine but two problems
1: No Service
2: Touch screen calibration was WAY OFF
BYAM DURP OOPS
Realized that I needed to get the latest Firmware before flashing the latest AOKP!
4)Full Wipe(I think?)
5)Install latest Firmware (T989UVMC6, right?) (Also did a factory reset/wipe)
Phone boots into Stock with latest firmware, however the touch screen is still calibrated way off!
Do steps 1-3 above again.
Touch screen calibration is still way off!
My only guess on the reason/fix for this is that maybe this is still some lingering problem of flashing the ROM on the outdated firmware, so I need to perform some sort of deeper wipe than just a Full Wipe via ClockWorkMod in order to get rid of any lingering problems. And then flash the latest firmware, and do steps 1-3 above.
Any ideas or suggestions?
Any other information needed?
Thanks in advance!

YoHoJo said:
I'll try to remember the steps of what happened as best I can.
T989 All Stock Running Gingerbread (Not sure what Firmware)
1)Installed CWM via ODIN
2)nstalled SuperUser via CWM
3)Installed latest AOKP from here http://aokp.co/devices/hercules
Booted up just fine but two problems
1: No Service
2: Touch screen calibration was WAY OFF
BYAM DURP OOPS
Realized that I needed to get the latest Firmware before flashing the latest AOKP!
4)Full Wipe(I think?)
5)Install latest Firmware (T989UVMC6, right?) (Also did a factory reset/wipe)
Phone boots into Stock with latest firmware, however the touch screen is still calibrated way off!
Do steps 1-3 above again.
Touch screen calibration is still way off!
My only guess on the reason/fix for this is that maybe this is still some lingering problem of flashing the ROM on the outdated firmware, so I need to perform some sort of deeper wipe than just a Full Wipe via ClockWorkMod in order to get rid of any lingering problems. And then flash the latest firmware, and do steps 1-3 above.
Any ideas or suggestions?
Any other information needed?
Thanks in advance!
Click to expand...
Click to collapse
wipe /system
didn't work??

prantoroy said:
wipe /system
didn't work??
Click to expand...
Click to collapse
I've done wipes like this
Via CWM I do the Factory Reset/Full wipe, then cache and dalvik cache.
Is there a way to more deeply wipe?
I saw in some other places that you can mount some locations and also wipe those too, I assume maybe doing that will result in a "fuller" wipe and also wipe the firmware too?
Care to explain exactly how I should be wiping?
Also after doing the wipe, do I just flash latest firmware, install CWM/root, and then a ROM?
Thanks

YoHoJo said:
I've done wipes like this
Via CWM I do the Factory Reset/Full wipe, then cache and dalvik cache.
Is there a way to more deeply wipe?
I saw in some other places that you can mount some locations and also wipe those too, I assume maybe doing that will result in a "fuller" wipe and also wipe the firmware too?
Care to explain exactly how I should be wiping?
Also after doing the wipe, do I just flash latest firmware, install CWM/root, and then a ROM?
Thanks
Click to expand...
Click to collapse
First,
Go to CWM
and go to mounts&stroage
then format everything except /sdcard
.
.
then flash latest Firmware.
then do whatever u like
like root,cwm or flash custom rom

prantoroy said:
First,
Go to CWM
and go to mounts&stroage
then format everything except /sdcard
.
.
then flash latest Firmware.
then do whatever u like
like root,cwm or flash custom rom
Click to expand...
Click to collapse
So without a doubt I can wipe/format everything except SD Card and just flash a firmware via ODIN and be just fine?
Just double checking because it sounds scary to wipe/format so many things!

YoHoJo said:
So without a doubt I can wipe/format everything except SD Card and just flash a firmware via ODIN and be just fine?
Just double checking because it sounds scary to wipe/format so many things!
Click to expand...
Click to collapse
no.its fine.
I do it everytime I flash a rom

prantoroy said:
no.its fine.
I do it everytime I flash a rom
Click to expand...
Click to collapse
Formatted data, system, cache, and emmc.
Did Factory Wipe/Reset, Wiped cache and Dalvik cache.
Used ODIN to flash T989UVMC6, and still the touch screen is not calibrated properly.
However (I've seen other people report that problem but haven't seen a fix) when the phone is plugged in, it works just fine, but whenever it is unplugged the touch screen very unusable due to being calibrated so wrong. :/ After wiping and formatting everything and flashing a stock Firmware I'm all out of hope now!

YoHoJo said:
Formatted data, system, cache, and emmc.
Did Factory Wipe/Reset, Wiped cache and Dalvik cache.
Used ODIN to flash T989UVMC6, and still the touch screen is not calibrated properly.
However (I've seen other people report that problem but haven't seen a fix) when the phone is plugged in, it works just fine, but whenever it is unplugged the touch screen very unusable due to being calibrated so wrong. :/ After wiping and formatting everything and flashing a stock Firmware I'm all out of hope now!
Click to expand...
Click to collapse
Me TOO
sorry unable to help

Bump

YoHoJo said:
Bump
Click to expand...
Click to collapse
Try using this app. It may help you. Worked for me!
play.google.com/store/apps/details?id=br.shop4apps.touchscreenbooster.com

My Oukitel's k4000 Touch Screen Calibration Messed Up After Flashing ROM on Wrong ROM
Hello,
Please help me. I tried to see if a ROM for 'Oukitel k4000 pro' could fit 'Oukitel k4000'.
Since it didn't work out, I flashed back to the original ROM of 'Oukitel k4000', but since then, my screen behaves wrongly to touches.
Could anyone faced and managed to beat this issue?
I saw several different posts on the net, but none of them actually helped me.
One more thing:
Please try to explain, as if you explaining a child, since my android experience is not that vast to follow all the shortcuts and proffecional terms.
Thank you,
Michael

[Q] Every ROM hangs at startup screen

Flashed several ROMS in my life and have not always wiped all data. Mainly i do dalvik and cache. My phones have always work. Now i have a Razr HD with an unlocked BL with TWRP loaded. I cant seem to get past the initial bootup screen no matter what ROM i flash. What am i missing here guys? Do i need to check the "factory reset" in TWRP along with Dalvik, system and cache?

famac! said:
Flashed several ROMS in my life and have not always wiped all data. Mainly i do dalvik and cache. My phones have always work. Now i have a Razr HD with an unlocked BL with TWRP loaded. I cant seem to get past the initial bootup screen no matter what ROM i flash. What am i missing here guys? Do i need to check the "factory reset" in TWRP along with Dalvik, system and cache?
Click to expand...
Click to collapse
answered here http://forum.xda-developers.com/showthread.php?t=2465695

bweN diorD said:
answered here http://forum.xda-developers.com/showthread.php?t=2465695
Click to expand...
Click to collapse
Not really. The majority of ROMS in question have been 4.2.2 based....

famac! said:
Not really. The majority of ROMS in question have been 4.2.2 based....
Click to expand...
Click to collapse
quote from post 11
"By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot"

bweN diorD said:
quote from post 11
"By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot"
Click to expand...
Click to collapse
Please explain this further to me. My problem is with 4.2.2 ROMS. The fix above is for folks having issues with 4.3 ROMS. Are you suggesting that doing this will also fix my 4.2.2 problems? This is also CWM while i run TWRP. I did a quick look and the two are setup a little difference. I played around with those highlighted instructions and almost accidentally wiped my only backup of my previous state. I actually thought i was toast but somehow i reloaded and went back to my old backup state.

famac! said:
Please explain this further to me. My problem is with 4.2.2 ROMS. The fix above is for folks having issues with 4.3 ROMS. Are you suggesting that doing this will also fix my 4.2.2 problems? This is also CWM while i run TWRP. I did a quick look and the two are setup a little difference. I played around with those highlighted instructions and almost accidentally wiped my only backup of my previous state. I actually thought i was toast but somehow i reloaded and went back to my old backup state.
Click to expand...
Click to collapse
i could be wrong, but in my opinion having the exact same issue even though its a different version, one of the 2 fixes in that thread should work.
the first fix likely doesn't directly apply although i suggest you ensure you have the latest version of your recovery of choice found here http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
second fix (backup ALL data you don't want to loose first as noted above), then do a full wipe as listed above, not just a fdr that doesn't wipe everything on the internal card.
the problem at this point is, you are assuming it wont work because of version differences, i am assuming it will. until you try it, i don't see any point in exploring other options, if there are any.

Dirty flashing when you go to different ROMs is generally not a good idea. Even on 4.2.2, it leaves residual data behind. There's a reason that the devs talk about doing complete wipes in their ROM threads, and there's a reason that they tell you not to talk about bugs unless you use their install directions.

RikRong said:
Dirty flashing when you go to different ROMs is generally not a good idea. Even on 4.2.2, it leaves residual data behind. There's a reason that the devs talk about doing complete wipes in their ROM threads, and there's a reason that they tell you not to talk about bugs unless you use their install directions.
Click to expand...
Click to collapse
Yeah, i am straight now. Did a full wipe and sailed right past the startup animation. Thanks all.

famac! said:
Yeah, i am straight now. Did a full wipe and sailed right past the startup animation. Thanks all.
Click to expand...
Click to collapse
Nice! Glad to see you got it working.

[Q] Failed upgrade - now soft bricked

Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim

sheltont said:
Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim
Click to expand...
Click to collapse
Use Odin to restore to the stock ROM. Download the stock rom from samfirmware.com and flash it in Odin as PDA. Then, use the latest recovery (either TWRP, CWM, OR PhilZ) from @Android-Andi's recovery thread in the Dev section. You should now be able to flash any ROM you want to. Make sure you do a backup and a wipe system, cache, Dalvik, data, and android secure (if it's an option.)
Sent from my SGH-T989

thanks and....
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?

sheltont said:
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?
Click to expand...
Click to collapse
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989

yep
jrc2 said:
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989
Click to expand...
Click to collapse
Yes, I did twice and it's still hung after apparent success installation according to Odin. I've tried it twice.

No success
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim

sheltont said:
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim
Click to expand...
Click to collapse
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989

good idea but still no success....
jrc2 said:
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989
Click to expand...
Click to collapse
Hi, I've retried all that this morning-i must admit that I didn't know about wiping cache after install, however it's not made any difference, and still hangs on first boot...
Any other ideas? Thanks for all your help.

Happy success
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim

sheltont said:
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim
Click to expand...
Click to collapse
Which version of PhilZ? And I have found that TWRP 2.7.1.0 works better than other versions for KK.
Sent from my SGH-T989

Use latest Philz touch recovery. And use the rom and gapps compatible to your tab. Don't forget to reset to factory setting, clear cache and wipe dalvic cache before flashing the rom and gapps ☺
Sent from my GT-P3100 using XDA Free mobile app

LG G2 VS980 bootloop

Whenever I try to install a custom ROM( http://forum.xda-developers.com/showthread.php?t=2741344)on my LG G2 VS980(verizon), it reboots, does the LG logo for a while, then turns off, buzzes and repeats. I am (currently) using andriod 4.4.2 with TWRP recovery. Thanks in advance for your help!!!!!!!!!!!!

kosecheck said:
Whenever I try to install a custom ROM( http://forum.xda-developers.com/showthread.php?t=2741344)on my LG G2 VS980(verizon), it reboots, does the LG logo for a while, then turns off, buzzes and repeats. I am (currently) using andriod 4.4.2 with TWRP recovery. Thanks in advance for your help!!!!!!!!!!!!
Click to expand...
Click to collapse
Before I start suggesting anything are you clearing the cache and dalvik cache along with performing factory reset in custom recovery before installing any custom ROMS (just checking)

TechMinerUK said:
Before I start suggesting anything are you clearing the cache and dalvik cache along with performing factory reset in custom recovery before installing any custom ROMS (just checking)
Click to expand...
Click to collapse
Yup thats what i did.

kosecheck said:
Yup thats what i did.
Click to expand...
Click to collapse
i have always manually formatted cache, dalvik, data, and system 3 times in twrp. i never use the fdr option. never had an issue.
you might want to make sure you have the latest version of twrp also, and re-download the rom. maybe you got a bad copy.

bweN diorD said:
i have always manually formatted cache, dalvik, data, and system 3 times in twrp. i never use the fdr option. never had an issue.
you might want to make sure you have the latest version of twrp also, and re-download the rom. maybe you got a bad copy.
Click to expand...
Click to collapse
I figured out what was wrong. Verizon pushed a OTA update changing it from VS98025b to VS98026a and most ROMs do not support that yet.

kosecheck said:
I figured out what was wrong. Verizon pushed a OTA update changing it from VS98025b to VS98026a and most ROMs do not support that yet.
Click to expand...
Click to collapse
Glad you got it fixed