Database Info

[tutorial]MOST EASY WAY TO ROOT MICROMAX A56 NINJA 2 [step by step procedure]

hey, guys this is me again and I have got a lot of PMs and messages on my email regarding guide showing step by step process for rooting micromax A56 ninja 2.
Now, there are two ways to root this phone.
[FIRST] :-
1.Just download the .zip file to your computer and then transfer it to your sd card.
http://www.mediafire.com/?pfl66pst67bblq1
2.Now switch off your device.
3.Press "volume+" key and "power button" together.
4.when the phone vibrates (it does when you switch it on or off normally)..leave the power button but continue pressing the "volume +" button.
5.you will enter into your recovery.
6.you will see a yellow bar showing the completition for the process.
7.leave your phone and dont touch it until it completes.
8 .Your phone will restart.
9.download super user app from the market and install it. (IMP).
10.you are rooted.
Requirements:-
1.Nothing.
2.back up your contacts and messages and other data.
[SECOND] :-
1. download the attachments here.
2. download this : http://www.mediafire.com/?jrzuezl8s5t8k0s
3. download android sdk from http://developer.android.com/sdk/index.html.
and install it by following the instruction onthe page.
4.extract the usb.ini file in the ".android" folder located at C:/users/(ur_name)/
5.You dont need to create this folder it should already exist...after you installed the sdk.
6.download and install unlock root from step 2
7. go to your phone's settings->applications->development and enable USB Debugging NOW connect your phone to PC.
8. go to C:/users/(ur_name)/android-sdk/platform-tools
9.open command line there
10 type adb devices (hit enter)
11. verify that A56 is listed.
12. now run unlock root. and click root option.
REQUIREMENTS :-
1.patience
2.Common sense.
NOTE : if you get any unexpected results or any step is not giving the output as desired. JUST GO WITH THE FIRST METHOD.
Regards,
imetal1.

Nice TUTs man....this may help the newbies here.

That rom given by swap002 is nt rooted i've checked it.
Its just the same as we both felt pre rooted stock rom. It needs to be rooted via unlockroot.
Sent from my A56 using xda premium

Micromax funbook alpha p250: All Things Thread

MICROMAX FUNBOOK ALPHA ALL THINGS THREAD
ROOT YOUR FUNBOOK ALPHA EASIEST WAY
DOWNLOAD SUPER ONE CLICK ROOT FROM HERE http://superoneclick.en.malavida.com/
ENABLE USB DEBBUGING in settings/developer options
connect yor tablet to pc click the root button
it takes a couple of minutes restart your funbook alpha and enjoy
if it says any error install
java jdk from here http://www.oracle.com/technetwork/java/javase/downloads/index.html
and android sdk from here http://developer.android.com/sdk/index.html
unroot your funbook alpha
follow above process instead of root click unroot enjoy
CWM FOR FUNBOOK ALPHA
WHAT ROOTING A DEVICE MEAN WITHOUT CWM
SO HERE IS CWM FOR MICROMAX FUNBOOK ALPHA
First download novatools from here http://www.mediafire.com/?3wln4u1geo1g1vs
and cwm recovery from here http://www.mediafire.com/?t3ctcths6r2229q
make sure you have extracted the zip
now place the img in root of external sd card [some users reporting problems if placed in internal sd card]
access the cwm recovery by pressing volume up and power key
Note:there is no back button because alpha doesnt have physical keys
after cwm back up go to backupformat hold the power key your alpha will reboot
credits:willing magic
please hit thanks it took 4 hours for searching and pasting these information

MICROMAX FUNBOOK ALPHA ROMS
JELLYBEAN ROM FOR MICROMAX FUNBOOK ALPHA
LINK http://forum.hackmyandroid.com/f31/[rom][funbook]cyanbook-jellybean-edition-v-1-[11-09-2012]-240/
PRO A13 ROM http://www.androidtablets.net/forum...eneric-7-a13-android-4-0-4-hyper-edition.html
CYANOGEN MOD FOR FUNBOOK ALPHA
http://forum.xda-developers.com/showthread.php?p=31368415
STOCK ROM
LINK http://www.androidtablets.net/forum...eric-7-a13-android-4-0-4-hyper-edition-3.html
jellybean rom working awesome http://www.techknow.t0xic.nl/forum/index.php?topic=4595.0 (will shortly mirror it )
cm 10 for our alpha http://www.freaktab.com/showthread....02c-amp-PMIC703-CM10-Jelly-Bean-Compatibility
alphadroid rom http://www.mediafire.com/?8e7p9e7bcopoazw
tried the above roms did any mistake and bricked your device thinking of giving it to service center not needed here you
go follow this post and your tab is once again alive
http://funbook.gizmolord.com/installing-clean-android-ics-on-micromax-funbook/
please hit thanks it took almost 4hrs for writing this post
please hit thanks it took almost 4hrs for wirting this post pls it doesnt cost you

alternate method for rooting very easy
Steps :
1. download file from here (Bin4ry)
http://*******/HSpiK
2. Now download adb drivers. you can get the package by searching for 'adb drivers'
check http://forum.xda-developers.com/show....php?t=1662082 for more info
3. after you have installed it , go to the settings
Tick these 'Security -> unknown sources' and 'Developer options-> USB debugging'
4. Connect the device simply to pc usb port , do not turn on usb storage in device , just connect and keep it . In the device you can see 'usb debugging' in the bottom right corner after connecting
5. Now extract the zip file downloaded earlier , that is , the Bin4ry
6. Run 'RunMe.bat'
7. now type '1' and press enter
8. Now some things come writing like 'pushing busybox , super su' something like that
9. after some time it will say to click restore on device.
10. now look at the device and we can see that there two options , restore data and dont restore.
11. Click restore data.
12.wait some time and the device will restart
13.Now on the computer screen we can see that the successfully installed message.
14. Now to check whether you have rooted correctly , install 'root checker' from play store on the device and run it and click check or verify.
15. Boom !! It says device is rooted
16. Or just simply check your device's application area for 'SuperSU' application . If it is there , you have rooted correctly otherwise something have gone wrong. Just redo the steps it is simple. (please check whether you have installed adb drivers correctly)

reserved for something just for precaution creating these reserved post caust newbies will waste time searching whole thread

[ROOT][CWM recovery]QMobile A4 bolt|

Hello All!
As You people know i always post things for QMobile A2 users but today i am posting for QMobile A4 bolt users
I was receiving messages nd also peoples were posting nd asking on the page that to how to root this A4 bolt !!!
Dear QMobile A4 bolt users ur prob is now solved & em here to get ur phone rooted nd cwm recovery installed!!!
This method is not checked by me nor any a4 bolt users but this method is checked by users of A4 clone phone!! nd this method is also i took from clone phones thread so full credit to them but also me to gather the info nd mix them in 1 thread coz i hv gathered this info from diifernet blogs! nd some info is by me!!
WARNING!!!
I am not responsible for any brick or broken hearts so dont blame me in any case!!
EDIT
The Below method is 100% working nd checked. Also the below method of rooting is working for a2 bolt lite too!!
prove
Root Method
REQUIREMENTS
1 QMobile A4 bolt
2 Orignal data cable
3 Moroboro pc suite for installing drivers automatically| DOWNLOAD IT
4 Unlock root |DOWNLOAD
5 this is optional if unlock root will not work then use it for rooting! srsroot |DOWNLOAD
6 A brain
Procedure
1) Attach your phone to the computer and turn on usb debbuging from Settings>applications>development>USB Debugging ...windows will try finding the drivers for it named e56 and will oviously fail..
2) Start moborobo pc suite.. it will search for devices and will auto install the drivers for your phone.
3) Disconnect the phone and exit the moborobo pc suite. exit it from status bar dont just close it.
4) Connect the phone again and start Unlockroot or srs root..
5) Click on the root button..Unlockroot will automatically search for the device(Named E56). Select it.
6) The rooting process will start and your phone will be rebooted. and you will see the SuperSu app in the app drawer.
NOW AFTER ROOTING ,
Install Clockworkmod Recovery
REQUIREMENTS
1 A brain
2 ADB pACKAGE |DOWNLOAD
3 QUICK BOOT |install it on ur phone via play store
4 CWM recovery | DOWNLOAD
Procedure
1) Now Extract the ADB package in your Pc root drive (Basically the root drive is C: drive )
2) Download the Recovery from above
3) Extract the ADB package & you will get an adb folder. Now put the Recovery.img downloaded above in that adb folder.
4) Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
5) Now Download the Quick Boot App from above & install it in your Mobile. Open that App & click on Bootloader option.
6) After sometime your phone will get stuck at the logo. (don’t panic)
7) Connect your phone to PC using USB cable.
8) Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
9) Now a black cmd window will open, there type fastboot devices
Note :- This should display your device name in Fastboot mode, if nothing is shown, then you have to Follow this to install adb drivers
10) Now Type fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery img on your QMobile A4 Bolt
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
ENJOY QMobile A4 bolt users , now u hv rooted & cwm recovery installed!
DONT copy this method to other blogs nd websites!!
Qmobile A4 Bolt users HIT that THANKS button because i deserve that!!

I could not enter the bootloader mode through quikboot aap on my Bolt a2 lite,,,,however i have rooted it successfully.... kindly let me know to install CWM???

Micromax A117 Magnus All things root & Development!

The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
http://d-h.st/K6W
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED Must link to the main thread.
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS

Is It Safe to Flash CWM Recovery ON Canvas Magnus Is It Really Tested I have A Canvas Magnus and I want to Install CWM recovery on it.

sayan8 said:
The Recently Launched A117 is a good and direct replacement to the A116..
Anyway Here it is
1. Drivers
http://mediafire.com/?e6c4j3d8j6c5ui3
2..ROM
Mod Edit Link Removed
3.ROOT Guide
By using Root with Restore by Bin4ry v15.7z(download from attachments)
1.Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2.Connect your device to any PC/laptop and install the drivers .
3.Unzip the root tool you downloaded above.
4.Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have
connected your device to the PC, so don't go mad searching for this option before you have even connected your device.
6.Run the runme.bat file.
7.A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your Micromax A88, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
8Your device will reboot during the process after which Bin4ry will copy some files to your device.
9.Else just reboot your phone
10.When the green letters in the command prompt says Have Fun!
That means, your device is rooted now and you can enjoy Superuser permissions!
By Framaroot
MOD EDIT LINK REMOVED
Install nd Click Root.Then install Busybox from play Store
CWM - !!{NOT TESTED BY ME BUT MY FRIEND TESTED IT}
Install Mobile Uncle Tools from Google Play
Recovery - MOD EDIT LINK REMOVED - Untested recovery
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash my recovery.img file
4.Done
If you Like my post please click THANKS
Click to expand...
Click to collapse
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.

Minimilised_MR said:
Give proper credit to the ROM creator. Copying is prohibited. You could be ban. And stop copying my work. It's my hard work.
Edit: I could see your rooting note. That's simply copy paste. Will report it soon!
Full Regards.
Click to expand...
Click to collapse
Hey Bro i didnt copied -_-.

Thread Re-opened
Thread temporarily closed pending XDA investigation.
Thread re-opened. Rom download link re-established.
Links removed for Framawork.apk, as the link should be directed to the apk's XDA thread by the original author.
Especially for the CWM Recovery that the OP has not been tested. If the recovery was not compiled using all correct fstabs, the result will be a corrupted/damaged partition, and possibly a perma-bricked device.
MD

I am also looking for stock rom and stock recovery. How to take back up of these??
So i can go ahead and install cwm and root

A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed. Release
A117: The software version “S9204P_MP_IN_MMX_18_FLASHER_USER” is confirmed.
Release note: Integrated ‘foneclay’ in the software.
https://www.adrive.com/public/UvawHB/S9204P_MP_IN_MMX_18_FLASHER_USER.rar
Please support me by hitting the THANKS BUTTON for me

Please regular update forum.....
Sent from my Samsung Galaxy S4 Mini GT-I9505 using XDA Premium 4 mobile app

Check below link for All in One Guide for Canvas Magnus. Regularly updated
http://forum.xda-developers.com/showthread.php?p=48466519
http://forum.xda-developers.com/showthread.php?t=2569049

Xolo Q2000 Development [ Rooting & Rom List]

NOTE: This tutorial is for rooting Xolo Q2000. These are the instructions to root Xolo Q2000 using Motochopper Tool on your Windows Computer.
Easiest and Safest Method
NO DATA LOSS
Your Warranty will be void after rooting
Credits: Full Credits goes to DAN ROSENBERG
Requirement:
1. Ofcourse Xolo Q2000 Handset.
2. Atleast 50% battery
3. Your Brain
4. Some Patience.
Step 1: Download and extract Xolo Q2000 USB driver on your computer.
Step 2: Enable USB debugging on your handset. To Enable: Setting > Development > USB Debugging (Tick to Enable it)
To show Development Option in Setting menu just go to Setting > About Phone > Build Number (Tap on it 5-8 time to enable developer mode)
Step 3: Connect Xolo Q2000 to ur computer and install usb driver.
Step 4. Download and Extract Motochopper tool on your computer. After Extracting files, Open run.bat file.
A black screen will pop up, now press any key from keyboard to start rooting process.
Once rooting is complete, you will see a success message. Again press any key to continue.
Your phone will Restart automatically.
Now your XOLO Q2000 is successfully rooted.
To verify, Open application menu on your smartphone and see the SuperSU app installed. :good::good::good:
UNROOT: Open SuperSU> Settings > Full Unroot.

Need stock recovery image
mohitnizami said:
NOTE: This tutorial is for rooting Xolo Q2000. These are the instructions to root Xolo Q2000 using Motochopper Tool on your Windows Computer.
Easiest and Safest Method
NO DATA LOSS
Your Warranty will be void after rooting
Credits: Full Credits goes to DAN ROSENBERG
Requirement:
1. Ofcourse Xolo Q2000 Handset.
2. Atleast 50% battery
3. Your Brain
4. Some Patience.
Step 1: Download and extract Xolo Q2000 USB driver on your computer.
Step 2: Enable USB debugging on your handset. To Enable: Setting > Development > USB Debugging (Tick to Enable it)
To show Development Option in Setting menu just go to Setting > About Phone > Build Number (Tap on it 5-8 time to enable developer mode)
Step 3: Connect Xolo Q2000 to ur computer and install usb driver.
Step 4. Download and Extract Motochopper tool on your computer. After Extracting files, Open run.bat file.
A black screen will pop up, now press any key from keyboard to start rooting process.
Once rooting is complete, you will see a success message. Again press any key to continue.
Your phone will Restart automatically.
Now your XOLO Q2000 is successfully rooted.
To verify, Open application menu on your smartphone and see the SuperSU app installed. :good::good::good:
UNROOT: Open SuperSU> Settings > Full Unroot.
Click to expand...
Click to collapse
Hi,
Thanks for your tutorial.
I got my phone rooted. However when i tried to install custom recovery.
Its not working as the cwm recovery image found to be not working which i sourced from another thread. Now i lost my stock recovery as well.
Could you please upload the stock recovery image or working cwm recovery image.
Thanks. l