Database Info

Superoneclick 2.1 stuck on Step 6 HELP

Hi,
Im trying to root my G2X using superoneclick but everytime it reaches step#6 the program says not responding and it just locks up. Has anyone had this issue and knows how to resolve it? Im running the G2X with the gingerbread update and the latest superoneclick which I beleive is 2.1. I unmounted the SD card and I have the USB debugging checked.
Anyone?
Thanks

Superoneclick does not work on gb update, nvflash custom recovery, then just flash any rom you want.
Look in dev section on how to nvflash custom recovery.
Start here http://tinyurl.com/3ejyxct

Dude u people need to do a little research wtf man u probably been at this for days all u have to do is flash recovery with nvflash use tga gunman's guide its a one click tool like the tool we use for root its one button done, then u just flash xboarders rom or cm or even restore a backup if u have one anything with root will give u root privileges, I myself updated with LG updater tool (I just wanted baseband) I then flashed recovery, then restored my cm nightly backup, still had new baseband and was rooted again

fcisco13 said:
Superoneclick does not work on gb update, nvflash custom recovery, then just flash any rom you want.
Look in dev section on how to nvflash custom recovery.
Start here http://tinyurl.com/3ejyxct
Click to expand...
Click to collapse
Thanks, it worked perfectly

As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.

Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
So that worked with stock gingerbread?

phburks said:
So that worked with stock gingerbread?
Click to expand...
Click to collapse
As far as I know the exploits are blocked for security reasons so they never get root access. Without temporary root super one click cannot install the programs needed to make root permanent. If this is a work around that would be a new development.

still don't get it
read the posts but still dont understand how to root my galaxy s2. SOC freezes at step 6.
info: GS2, 2.3.3 phone bought in hong kong, flashed to new european firmware. insecure kernel. bb: I9100XXKDH. Original version "2.6.35.7-I9100XWKDD-CL161513 [email protected]#2" Compilation number "GINGERBREAD.XWKDD"
Can someone please help me?

androst said:
read the posts but still dont understand how to root my galaxy s2. SOC freezes at step 6.
info: GS2, 2.3.3 phone bought in hong kong, flashed to new european firmware. insecure kernel. bb: I9100XXKDH. Original version "2.6.35.7-I9100XWKDD-CL161513 [email protected]#2" Compilation number "GINGERBREAD.XWKDD"
Can someone please help me?
Click to expand...
Click to collapse
Um...GS2? This forum is for G2x.

If you happen to have a linux machine you can root this way.
http://forum.xda-developers.com/showthread.php?t=1259852

Man of La Mancha said:
Um...GS2? This forum is for G2x.
Click to expand...
Click to collapse
Awesome. Sorry guys.
@jcbofkc thanks! if it looks promising i'll create linux partition

guys ! help me ...
Hi Guys,
I am also getting the same old Freeze error at step 6.. i am trying with samsung mini and i use super one click 2.1.1 . please help.....

premsurya said:
Hi Guys,
I am also getting the same old Freeze error at step 6.. i am trying with samsung mini and i use super one click 2.1.1 . please help.....
Click to expand...
Click to collapse
seriously???
Again, this is G2x forum not samsung xxx!

jose makalolot said:
seriously???
Again, this is G2x forum not samsung xxx!
Click to expand...
Click to collapse
doesnt matter what device people use. ultimately, stock GB freezes at step 6. can anyone can validate the steps above, "to unplug the cable and toggle usb debugging" works or not?
if the only way is to flash the device, then there is no Rooting tool available yet for GB stock devices.

em0101001 said:
doesnt matter what device people use. ultimately, stock GB freezes at step 6. can anyone can validate the steps above, "to unplug the cable and toggle usb debugging" works or not?
if the only way is to flash the device, then there is no Rooting tool available yet for GB stock devices.
Click to expand...
Click to collapse
If the device has an alternate recovery (doesn't matter which one) you can use by G2X root zip to root it. It will work on any GB device that has an alternate recovery.

..well i do have a G2X, with 2.3.3 out of the box.... and it get stuck on step 6 too
"rooting device...-step #6
that's it!...

vourinen said:
..well i do have a G2X, with 2.3.3 out of the box.... and it get stuck on step 6 too
"rooting device...-step #6
that's it!...
Click to expand...
Click to collapse
You can't superoneclick root 2.3.3 only 2.2. You have to flash CWM recovery then install a root zip or pre rooted ROM. All can be found in the Dev forum.
Sent from my CM 7.1.0 G2x using XDA app

i myself would like to see a new biuld of this pragram that works with the g2x w/gb 2.3.3. who made the software ?

Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
Worked for me. Thank you, sir!

Thanks
Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
This worked for me. Thanks

Cant root LG O3D V20C, Singapore version even when using Megatron.

I cant seem to root the phone no matter what method I use; from superoneclick to megatron by Dan Rosenberg... When I clicked enter, it says waiting for device...Daemon start successfully. It just stopped right there. Before the update, not v20c but still 2.3.5, everything works fine. I am able to root it. Only this ver. I couldnt... So please I need ur help...

Enable USB Debugging.

Did it b4 too...
pandaball said:
Enable USB Debugging.
Click to expand...
Click to collapse
To pandaball: I already did enable usb debugging b4 rooting... I just don't know what to do already. I followed the steps given but to no avail.

Wich step is sending error?
Post it, with more info you give it's easier to help you out
Sent from my LG-P920 using xda premium

If it says it is waiting for device, probably you haven't correctly installed the windows drivers.

Thank You Guys!
Thank you to all of u who are willing to help me. I've managed to root it after I went to LG service centre to reinstall the OS...

[Q] Help with Att Fusion 2 Aka Huawei U8665

Alright I bought this phone for the simple fact that it is an update from the u8652. I tried superoneclick and unlock root. I cant get this phone to root at all. Unlock root gives me an error that shell root failed. Superoneclick says it cant get permission and it cant remount the device. Im lost . Anyone with any advice please feel free.

I'm having the same issue. I tried gingerbreak and z4root and had no luck. I can't find anything about it online

I can help.
Look download and install unlockroot on your pc unlockroot.com and put phone in debug mode settings-application-development and enable debugging and the click root and see if it works! Can it play temple run?

HUAWEIu8652 said:
Look download and install unlockroot on your pc unlockroot.com and put phone in debug mode settings-application-development and enable debugging and the click root and see if it works! Can it play temple run?
Click to expand...
Click to collapse
I tried that, but it said it failed to get shell root. A lot of the Huawei devices are supported, but I didn't see any of them that had 2.3.6.
Hopefully someone will figure something out. I bought this as a spare phone, and it would be great to get rid of all the bloatware and rev it up a little bit.

Yes, I am having the very same problem. I have tried ZRoot, Ginger Break, Unlock Root, just to name a few. Still no luck. Please help.
Dj0728 said:
Alright I bought this phone for the simple fact that it is an update from the u8652. I tried superoneclick and unlock root. I cant get this phone to root at all. Unlock root gives me an error that shell root failed. Superoneclick says it cant get permission and it cant remount the device. Im lost . Anyone with any advice please feel free.
Click to expand...
Click to collapse

Ok try downloading android sdk.WHAT ABOUT TEMPLE RUN!?

kosein said:
Yes, I am having the very same problem. I have tried ZRoot, Ginger Break, Unlock Root, just to name a few. Still no luck. Please help.
Click to expand...
Click to collapse
I have downloaded the latest android sdk. Still didn't work.

HUAWEIu8652 said:
Ok try downloading android sdk.WHAT ABOUT TEMPLE RUN!?
Click to expand...
Click to collapse
I am also trying to root the Fusion 2 Huawei u8665 with no success so far. Tried all the same programs that kosein listed above. To answer the question asked above by HUAWEIu8652 Yes it can play Temple Run. Any help would be appreciated. Thank you in advance.

Try this.
Try using this method for the Fusion 1 but don't install any Fusion/Sonic roms because the CPU on the Fusion 2 is faster and it will cause malfunctioning. http://forum.xda-developers.com/showthread.php?t=1494843 :good:

HUAWEIu8652 said:
Try using this method for the Fusion 1 but don't install any Fusion/Sonic roms because the CPU on the Fusion 2 is faster and it will cause malfunctioning. http://forum.xda-developers.com/showthread.php?t=1494843 :good:
Click to expand...
Click to collapse
Followed your advice. Failed to get shell root

Did you install sdk and the tools? what about java se development kit 7 update 9? that is nessecary! Try it!

HUAWEIu8652 said:
Did you install sdk and the tools? what about java se development kit 7 update 9? that is nessecary! Try it!
Click to expand...
Click to collapse
Ok sorry let me start off by apologizing I was using the wrong version of Super One Click.
List of everything I am/have done so that maybe you can pinpoint anything I may be missing or doing wrong:
Installed Android SDK
Installed Java SE DEV KIT 7 update 9
Installed SuperOneClick 2.3.3
Made sure SD card is unmounted
Put phone in USB debugging mode
Turned on Log Switch
Set Log Setting to Verbose
Rebooted phone
Run SuperOneClick 2.3.3
Then I get stuck at step 7 Program stops responding
Hope you might have a clue what to do from here and thanks for your help either way. I tried to send a screenshot but it won't let me post links yet. If you need one send me a email same screen name at gmail

Unlockroot
You need unlockroot wich is better than superone click try it see if it works.

Forgot to explain things better.
in sdk manager you need to select android sdk tools and android sdk platform tools with a ckeck mark and then select install packages.

Same Problem U8652
HUAWEIu8652 said:
in sdk manager you need to select android sdk tools and android sdk platform tools with a ckeck mark and then select install packages.
Click to expand...
Click to collapse
So Im having the same problem and been following along with you guys, tried 3 different ways and continued to get same message. Havent tried the last thing that was advised but was awaiting the reply if it worked. Any news on that last message sent on the 3rd?

idk yet, i got sick of messing with it for a couple of days. Ill try tonight and leave an update on my results.

Sorry
First what android version does it have 2.3.what? if it's 2.3.5 then this won't work ill upload a link on instructions if you have 2.3.5. if you have 2.3.4 the follow sd james's instructions.

HUAWEIu8652 said:
First what android version does it have 2.3.what? if it's 2.3.5 then this won't work ill upload a link on instructions if you have 2.3.5. if you have 2.3.4 the follow sd james's instructions.
Click to expand...
Click to collapse
2.3.6 gingerbread

Has anyone figured out how to root this yet?
Sent from my SGH-T889 using xda premium

iamtimmah said:
Has anyone figured out how to root this yet?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Not to my knowledge. Any advice is appreciated.

No network signal after flashing official ICS

I have flashed the official ICS.bin but for some reason i am not getting any network signal. Can anybody help with this or had this problem? should i flash another baseband? Maybe the V30b baseband will work?

plus im not being able to root the phone. i tried to install the flashable zip by OS_Hacking but no luck even though it says its flashed and the adb_restore method is not working for me either. Help please

do you have IMEI:
*#06#

p-vlad said:
do you have IMEI:
*#06#
Click to expand...
Click to collapse
just checked that, shows as null. i guess i need to put the imei to get network?

naz86 said:
just checked that, shows as null. i guess i need to put the imei to get network?
Click to expand...
Click to collapse
yes. flash the KDZ version. look around the forum to see how.

p-vlad said:
yes. flash the KDZ version. look around the forum to see how.
Click to expand...
Click to collapse
ive tried the KDZ version, im unable to do that because im running windows 7 and the progam continually crashes, on 1 of the posts it says you have to run it on windows xp. i guess i could try 1 of the other tutorials to restore imei couldnt i?

naz86 said:
ive tried the KDZ version, im unable to do that because im running windows 7 and the progam continually crashes, on 1 of the posts it says you have to run it on windows xp. i guess i could try 1 of the other tutorials to restore imei couldnt i?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=33958426&postcount=4

naz86 said:
ive tried the KDZ version, im unable to do that because im running windows 7 and the progam continually crashes, on 1 of the posts it says you have to run it on windows xp. i guess i could try 1 of the other tutorials to restore imei couldnt i?
Click to expand...
Click to collapse
Use this guide which is sticky post in the dev section:
http://forum.xda-developers.com/showthread.php?t=1540163
It always worked for me and definitely works for flashing the stock ICS v28b no matter your Windows version.

Perform a factory reset and it will work...
Sent from my LG-P920 using xda app-developers app

greenbat said:
Perform a factory reset and it will work...
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
i've tried that and it doesn't seem to work. I've tried the methods to flash the KDZ but when the LG update program runs it always seems to download another update rather than use the V28B KDZ. Im at my wits end with this phone!

I say you try flashing the KDZ, but you're not guaranteed to get network working as I currently wasn't able to get mine working but everyone else seems to be doing fine by flashing the KDZ. I requested help, but no one has replied.
Remove all LG drivers and all LG software and start from scratch. I've done it through Windows 7 many times in the past and yesterday tried on Windows 8, with a few issues here and there, I finally got it. If you need help or get stuck just P.M. me so I can run you through it. Maybe the KDZ will work for you even though it didn't work for me.

The easiest way of course is to use LG flash tool on XP and you'll get rid of any problem
just follow this instruction
so many questions like this already in this thread.. and really got sicked of it.
please,just do a read..

bounce606 said:
The easiest way of course is to use LG flash tool on XP and you'll get rid of any problem
just follow this instruction
so many questions like this already in this thread.. and really got sicked of it.
please,just do a read..
Click to expand...
Click to collapse
It's 2013 and many people have strayed away from using an old OS like XP, suggesting to use it is not any help to anyone.
If you're sick of it don't come around. I've had my share of issues where quite a few people have helped me around here. That's what the community is for. I've personally read and followed everything to the dot, and still I don't have any network just like the OP. If the answer's around here then lead me to it, because I must not be reading correctly.

naz86 said:
i've tried that and it doesn't seem to work. I've tried the methods to flash the KDZ but when the LG update program runs it always seems to download another update rather than use the V28B KDZ. Im at my wits end with this phone!
Click to expand...
Click to collapse
If the LG update downloads another update instead of using the v28b.kdz then you've probably didn't setup the http server and the hosts file correctly.
Check the link to the guide I posted on the first page and make sure you follow all its steps.

to everybody who is trying to help resolve this issue it is very much appreciated. Nobody likes to run into problems when flashing etc but like one of the other members posted thats what this community is for. I might try get hold of a machine or laptop running XP or create a partition and install it on my laptop and see if thats work but before i do that i will give the server method a try again from the beginning and see if that works. Thanks people and i'll report back on what i do and if it works

look at link in my post before. work for win7 too

just download xbsall rooted v28b zip and flash with lg flash tool and if your on windows 7 make sure you run lg flash tool in xp sp3 compataility mode it should work for you then.
here is the link for downloads read carefully before flashing http://forum.xda-developers.com/showthread.php?t=1963847

I'm with the same problem. I changed baseband and I did not succeed ...
Sent from my LG-P920 using xda app-developers app

yehison said:
I'm with the same problem. I changed baseband and I did not succeed ...
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
try what i wrote in last post

oblivion786 said:
try what i wrote in last post
Click to expand...
Click to collapse
i haven't tried flashtool in xp mode so i'll give that try when i get back from work. Hopefully it works

Official 3D ICS Update! The LG Thrill 4G Gets ICS

hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/

coolshah said:
hi i just read the news on LG Thrill via Android Police
and ATT has released ICS for LG Thrill
can any dev post how to install it on P920 the international version of LG optimus 3D
Many Thanks.
http://www.androidpolice.com/2013/03/19/att-resurrects-the-lg-thrill-4g-from-the-dead-gives-it-ics/
Click to expand...
Click to collapse
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.

Android1993 said:
You're very late. Look around. You install it as you would any KDZ. Supported languages are English, Spanish, and French.
Click to expand...
Click to collapse
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?

coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
do you have the link for KDZ file?
Click to expand...
Click to collapse
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.

Android1993 said:
KDZ: http://forum.xda-developers.com/showthread.php?t=2196494
Bin Files: http://forum.xda-developers.com/showthread.php?t=2198069
You can use whichever method you're accustomed to. I usually do KDZ.
Click to expand...
Click to collapse
you can use LG flash tool to flash Bin files , following this guide don't forget to use P925 dll
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html

Re: Official 3D ICS Update! AT&T Resurrects The LG Thrill 4G From The Dead, Gives It
coolshah said:
but mylg update tool is giving me problems it not running
giving me this error
"please check your internet line and execute program again"
I also had this problem but after about 2 hours i managed to update my phone: here how i did the update:
Just connect to internet then immediately disconnect from internet within 1 or 1.5 seconds the program just needs to confirm that there is an established connection, i used this (my own) trick and I successfully updated my LO3D froyo to GB using kdz
Keep in mind that you need to connect to internet only for 1 second then DISCONNECT internet
Good luck
Click to expand...
Click to collapse

Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.

coolshah said:
Hi i tried to flash it (.bin files) and once its done flashing and the phone reboots i get this message
"Encryption unsuccessful"
It has a button with Reset phone i press it but nothing happens i tried to reboot phone 5 times no luck please help many thanks.
Click to expand...
Click to collapse
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.

Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
Mine was only Power and VOL down , and i reset factory my phone, he can try both way

Android1993 said:
Power off the phone and press Power + VOL Down + 3D as you usually would to get into recovery. From there you follow the steps to factory reset your device.
Click to expand...
Click to collapse
kupuku said:
Mine was only Power and VOL down , and i reset factory my phone, he can try both way
Click to expand...
Click to collapse
oh my God Thank You Very much man I love you guys thanks foe the tips. you guys saved me.
this method worked: "Power and VOL down" than it asked me for factory reset

well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?

coolshah said:
well after I set it up
now it wont get any network I am currently in UK using LYCA mobile can any one tell me any solution?
Click to expand...
Click to collapse
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs

kupuku said:
Just flash the right baseband you will get it works, you should try V28 baseband , if it doesn't try the V30 one
here http://d-h.st/Zzs
Click to expand...
Click to collapse
same no luck i tried the one you posted and the one that came with ics LGP925_V30B_00_CP.fls
still no network

Hope someone can help
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance

tmoca said:
I was running GB rooted. No custom ROM just rooted.
I saw the update, so I wanted to start fresh. I reset the phone, installed the update (lost root, as expected), went to apply root with Megatron Root Exploit, and it would not allow me to obtain root. Kept getting an error about directory not found. Don't recall the exact error.
I am currently running the ICS update with no issues, but would like to be rooted as I am missing a few apps that require root.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
to root use this procedure http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband

coolshah said:
to root use this procedure
Click to expand...
Click to collapse
What procedure??? I am not sure what you mean?

tmoca said:
What procedure??? I am not sure what you mean?
Click to expand...
Click to collapse
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband

coolshah said:
sorry i forgot the link i just added it in the post
http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
Click to expand...
Click to collapse
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me

tmoca said:
Sorry if this is a dumb question, but I am still a bit of a noob. I have only rooted once.
It appears form the link you posted that this is installing a custom rom. That is not what I am looking to do. Previously I was running GB, stock, just rooted to be able to freeze some apps and use a few apps that required root. That is all that I am looking to do at this point too.
ICS is loaded and running fine. Is there a way to get root back with out flashing and installing custom roms? or is this something that the hasn't been figured out yet?
Thanks again for your time and patience with me
Click to expand...
Click to collapse
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot

Root?
coolshah said:
so what rom you are on? ICS or GB?
if you are on ICS
than only follow the Root steps there http://forum.xda-developers.com/showthread.php?t=2191698&highlight=baseband
How to root:
1. Download Su_Bbox_1.20.2_gazhead_signed.zip and save it somewhere in your SD card
2. Use OS_Hacking's tool to install Wkpark's v1.25a bootloader (read his instructions and install OMAP driver first). After this step, your boot-up LG logo will be silver!
3. With the same tool install a GB recovery. (ICS recoveries are only for xbsall's ported SU760 ROM, they can't read your internal SD)
4. Boot into recovery
5. Flash the zip from step (1) and reboot
Click to expand...
Click to collapse
This looks like I have to bootload a custom rom and go back to gingerbread? Excuse my noobness you can see I just registered to ask this question. Also load a different baseband from the V30 I am on now?
I finally got ICS and dont want a custom ROM like tmoca asked.