Related
Hi,
Im trying to root my G2X using superoneclick but everytime it reaches step#6 the program says not responding and it just locks up. Has anyone had this issue and knows how to resolve it? Im running the G2X with the gingerbread update and the latest superoneclick which I beleive is 2.1. I unmounted the SD card and I have the USB debugging checked.
Anyone?
Thanks
Superoneclick does not work on gb update, nvflash custom recovery, then just flash any rom you want.
Look in dev section on how to nvflash custom recovery.
Start here http://tinyurl.com/3ejyxct
Dude u people need to do a little research wtf man u probably been at this for days all u have to do is flash recovery with nvflash use tga gunman's guide its a one click tool like the tool we use for root its one button done, then u just flash xboarders rom or cm or even restore a backup if u have one anything with root will give u root privileges, I myself updated with LG updater tool (I just wanted baseband) I then flashed recovery, then restored my cm nightly backup, still had new baseband and was rooted again
fcisco13 said:
Superoneclick does not work on gb update, nvflash custom recovery, then just flash any rom you want.
Look in dev section on how to nvflash custom recovery.
Start here http://tinyurl.com/3ejyxct
Click to expand...
Click to collapse
Thanks, it worked perfectly
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
So that worked with stock gingerbread?
phburks said:
So that worked with stock gingerbread?
Click to expand...
Click to collapse
As far as I know the exploits are blocked for security reasons so they never get root access. Without temporary root super one click cannot install the programs needed to make root permanent. If this is a work around that would be a new development.
still don't get it
read the posts but still dont understand how to root my galaxy s2. SOC freezes at step 6.
info: GS2, 2.3.3 phone bought in hong kong, flashed to new european firmware. insecure kernel. bb: I9100XXKDH. Original version "2.6.35.7-I9100XWKDD-CL161513 [email protected]#2" Compilation number "GINGERBREAD.XWKDD"
Can someone please help me?
androst said:
read the posts but still dont understand how to root my galaxy s2. SOC freezes at step 6.
info: GS2, 2.3.3 phone bought in hong kong, flashed to new european firmware. insecure kernel. bb: I9100XXKDH. Original version "2.6.35.7-I9100XWKDD-CL161513 [email protected]#2" Compilation number "GINGERBREAD.XWKDD"
Can someone please help me?
Click to expand...
Click to collapse
Um...GS2? This forum is for G2x.
If you happen to have a linux machine you can root this way.
http://forum.xda-developers.com/showthread.php?t=1259852
Man of La Mancha said:
Um...GS2? This forum is for G2x.
Click to expand...
Click to collapse
Awesome. Sorry guys.
@jcbofkc thanks! if it looks promising i'll create linux partition
guys ! help me ...
Hi Guys,
I am also getting the same old Freeze error at step 6.. i am trying with samsung mini and i use super one click 2.1.1 . please help.....
premsurya said:
Hi Guys,
I am also getting the same old Freeze error at step 6.. i am trying with samsung mini and i use super one click 2.1.1 . please help.....
Click to expand...
Click to collapse
seriously???
Again, this is G2x forum not samsung xxx!
jose makalolot said:
seriously???
Again, this is G2x forum not samsung xxx!
Click to expand...
Click to collapse
doesnt matter what device people use. ultimately, stock GB freezes at step 6. can anyone can validate the steps above, "to unplug the cable and toggle usb debugging" works or not?
if the only way is to flash the device, then there is no Rooting tool available yet for GB stock devices.
em0101001 said:
doesnt matter what device people use. ultimately, stock GB freezes at step 6. can anyone can validate the steps above, "to unplug the cable and toggle usb debugging" works or not?
if the only way is to flash the device, then there is no Rooting tool available yet for GB stock devices.
Click to expand...
Click to collapse
If the device has an alternate recovery (doesn't matter which one) you can use by G2X root zip to root it. It will work on any GB device that has an alternate recovery.
..well i do have a G2X, with 2.3.3 out of the box.... and it get stuck on step 6 too
"rooting device...-step #6
that's it!...
vourinen said:
..well i do have a G2X, with 2.3.3 out of the box.... and it get stuck on step 6 too
"rooting device...-step #6
that's it!...
Click to expand...
Click to collapse
You can't superoneclick root 2.3.3 only 2.2. You have to flash CWM recovery then install a root zip or pre rooted ROM. All can be found in the Dev forum.
Sent from my CM 7.1.0 G2x using XDA app
i myself would like to see a new biuld of this pragram that works with the g2x w/gb 2.3.3. who made the software ?
Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
Worked for me. Thank you, sir!
Thanks
Mulletsoldier said:
As ancient as this thread may be, I thought I would comment in case it comes up in a Google search (as it did for me).
As it was going through step #6, the common freeze point, I simply disconnected and toggled USB debugging to work it through each phase. It went to step #7, repeated, then left it to install busybox, superuser, and so forth.
Click to expand...
Click to collapse
This worked for me. Thanks
Okay I have searched and searched through these forums through and through and there is no possible way the root a Droid 2 Global. I have tried all the ways listed here Pete's way the One Click and the Superone Click and I tried Z4root and that didn't work either! Is there a new way to do this???(When I had my HTC Eris that was unrootable too.) I think Im gonna give up and on my next upgrade I'll probably just get an iPhone 4s or something, because any phone I touch will before outdated and unrootable and unable to flash any of the cool custom roms and play emulators and crap. I'll just an iPhone 4s and talk to siri.
Thanks anyway for all the help guys and thanks developer for all your hard work!!!
-Mars
you're doing something wrong
edit: did you enable usb debugging?
how far did you get?
and miui ics is a cool rom
thousands have rooted their global
at least hundreds anyways
Which stock version are you on? Froyo, GB...
War-Rasta said:
Which stock version are you on? Froyo, GB...
Click to expand...
Click to collapse
Pete's root is suppose to work on froyo too
Sent from my DROID2 GLOBAL using xda premium
Z4root will NOT work on stock 2.3.3. I've been using a Droid 3 one click root tool for linux and it's been working without fail. I've noticed this tool also works on the regular D2. Z4root will only work with the original stock.
EDIT: As far as cool roms, I'm using MIUI ICS. You like ICS but don't want to spend 700 bucks for an off contract phone? That's right. Your D2G runs it just fine lol.
MIUI isn't really ICS. It's just bits and pieces of the framework.
Gasai Yuno said:
MIUI isn't really ICS. It's just bits and pieces of the framework.
Click to expand...
Click to collapse
Diced, mixed, or blended, it's still the best rom I've used
I am using Gingerbread.
System Version 4.5.608.A956
Android Version 2.3.3
What does the DROID3 One-Click Root script tell you? Any errors while you run it?
Gasai Yuno said:
What does the DROID3 One-Click Root script tell you? Any errors while you run it?
Click to expand...
Click to collapse
Nothing. Once it finds the phone and the rooting process begins it will say running expoit 1 of 3 (setting up symlink) and it will remain at the reboot screen forever!
my phone says:
Bootloader DO.11
Battery OK
OK to program
Transfer Mode:
USB
then nothing happens!
This time I got the "server not running" error!
Make sure your phone is set to PC mode with USB debugging on. I usually have to run the script twice. The first time it doesn't do anything. End it and start it again and it works for me every time.
Also, as far as MIUI ICS, it's technically android 2.3.7 but it's still ICS to me lol. It's enough like it to make me happy.
xero925 said:
Nothing. Once it finds the phone and the rooting process begins it will say running expoit 1 of 3 (setting up symlink) and it will remain at the reboot screen forever!
my phone says:
Bootloader D0.11
Battery OK
OK to program
Transfer Mode:
USB
then nothing happens!
Click to expand...
Click to collapse
Have you tried pulling the battery without unplugging the phone from the PC and closing the script's window?
So that it boots normally and continues.
Gasai Yuno said:
Have you tried pulling the battery without unplugging the phone from the PC and closing the script's window?
So that it boots normally and continues.
Click to expand...
Click to collapse
I'm gonna try that now! Standby...
Nope that didn't work! I didnt think was going to either!
I just tried the latest version of SuperOneClick and again with this screen on my phone:
my phone says:
Bootloader D0.11
Battery OK
OK to program
Transfer Mode:
USB
I'm starting to think somehow that this screen somehow not allowing me the further root my phone! With the SuperOneClick the program running and then immediately stopped responding!
Any ideas?
what is the latest version?
I thought you just need it in usb charge mode and have usb debugging on
edit: I don't see a SuperOneClick that works with GB
---------- Post added at 03:49 PM ---------- Previous post was at 03:18 PM ----------
xero925 said:
I just tried the latest version of SuperOneClick and again with this screen on my phone:
my phone says:
Bootloader D0.11
Battery OK
OK to program
Transfer Mode:
USB
I'm starting to think somehow that this screen somehow not allowing me the further root my phone! With the SuperOneClick the program running and then immediately stopped responding!
Any ideas?
Click to expand...
Click to collapse
try petes with a different computer
HTML:
http://www.psouza4.com/Droid3/
1. Make sure you have Motorola drivers installed.
2. Download and unzip 'MotorolaOneClickRoot_psouza4'
3. On your phone: Settings > Applications > Development > USB debugging(check box)
4. Plug phone into computer and select "Charge Only" mode
5. Navigate to 'MotorolaOneClickRoot_psouza4' folder and run 'MotorolaOneClickRoot.exe'
6. Now just follow the instructions in the command window and unlock the phone after each reboot.
For Windows XP users having trouble try this -> v7 .bat One Click
edit: are you trying to using a computer with usb 1.0?
if that doesn't work, maybe sbf
Hi,
i am definitely not an expert, in fact everything i know about android i learned from reading other people's threads but i managed to root my droid 2 global yesterday using superoneclick.
the first time i tried to run it the program froze up in the middle of the process and wouldn't do anything, including close. while i was trying to figure out how to fix i came across a post that said to start the program while usb debugging is off and then turn it on when it says waiting for device so i tried that and it actually worked. go figure.
i have no idea if it will work for you or not but i thought i would share in case you wanted to give it a try.
crazydz said:
Hi,
i am definitely not an expert, in fact everything i know about android i learned from reading other people's threads but i managed to root my droid 2 global yesterday using superoneclick.
the first time i tried to run it the program froze up in the middle of the process and wouldn't do anything, including close. while i was trying to figure out how to fix i came across a post that said to start the program while usb debugging is off and then turn it on when it says waiting for device so i tried that and it actually worked. go figure.
i have no idea if it will work for you or not but i thought i would share in case you wanted to give it a try.
Click to expand...
Click to collapse
Thank you!!!! That worked!!! I can confirm SuperOneClick v2.3.3 works on a D2G running 2.3.3!!!!
Im using Barnacle wireless tethering and gonna flash a custom rom later today!!
Thank you guys so much helping and I plan to donate and support you efforts here!!
the instructions are on the SuperOneClick v2.3.3 thread
http://forum.xda-developers.com/showthread.php?t=803682
Turn USB Debugging OFF
Click Root
When it says: Waiting for Device, Turn USB Debugging ON
It'll now run RATC
When it says: Starting ADB Server...
Turn USB Debugging OFF
Turn USB Debugging ON
Turn USB Debugging OFF
All BEFORE it says "Waiting for device..." again
Click to expand...
Click to collapse
Alright I bought this phone for the simple fact that it is an update from the u8652. I tried superoneclick and unlock root. I cant get this phone to root at all. Unlock root gives me an error that shell root failed. Superoneclick says it cant get permission and it cant remount the device. Im lost . Anyone with any advice please feel free.
I'm having the same issue. I tried gingerbreak and z4root and had no luck. I can't find anything about it online
I can help.
Look download and install unlockroot on your pc unlockroot.com and put phone in debug mode settings-application-development and enable debugging and the click root and see if it works! Can it play temple run?
HUAWEIu8652 said:
Look download and install unlockroot on your pc unlockroot.com and put phone in debug mode settings-application-development and enable debugging and the click root and see if it works! Can it play temple run?
Click to expand...
Click to collapse
I tried that, but it said it failed to get shell root. A lot of the Huawei devices are supported, but I didn't see any of them that had 2.3.6.
Hopefully someone will figure something out. I bought this as a spare phone, and it would be great to get rid of all the bloatware and rev it up a little bit.
Yes, I am having the very same problem. I have tried ZRoot, Ginger Break, Unlock Root, just to name a few. Still no luck. Please help.
Dj0728 said:
Alright I bought this phone for the simple fact that it is an update from the u8652. I tried superoneclick and unlock root. I cant get this phone to root at all. Unlock root gives me an error that shell root failed. Superoneclick says it cant get permission and it cant remount the device. Im lost . Anyone with any advice please feel free.
Click to expand...
Click to collapse
Ok try downloading android sdk.WHAT ABOUT TEMPLE RUN!?
kosein said:
Yes, I am having the very same problem. I have tried ZRoot, Ginger Break, Unlock Root, just to name a few. Still no luck. Please help.
Click to expand...
Click to collapse
I have downloaded the latest android sdk. Still didn't work.
HUAWEIu8652 said:
Ok try downloading android sdk.WHAT ABOUT TEMPLE RUN!?
Click to expand...
Click to collapse
I am also trying to root the Fusion 2 Huawei u8665 with no success so far. Tried all the same programs that kosein listed above. To answer the question asked above by HUAWEIu8652 Yes it can play Temple Run. Any help would be appreciated. Thank you in advance.
Try this.
Try using this method for the Fusion 1 but don't install any Fusion/Sonic roms because the CPU on the Fusion 2 is faster and it will cause malfunctioning. http://forum.xda-developers.com/showthread.php?t=1494843 :good:
HUAWEIu8652 said:
Try using this method for the Fusion 1 but don't install any Fusion/Sonic roms because the CPU on the Fusion 2 is faster and it will cause malfunctioning. http://forum.xda-developers.com/showthread.php?t=1494843 :good:
Click to expand...
Click to collapse
Followed your advice. Failed to get shell root
Did you install sdk and the tools? what about java se development kit 7 update 9? that is nessecary! Try it!
HUAWEIu8652 said:
Did you install sdk and the tools? what about java se development kit 7 update 9? that is nessecary! Try it!
Click to expand...
Click to collapse
Ok sorry let me start off by apologizing I was using the wrong version of Super One Click.
List of everything I am/have done so that maybe you can pinpoint anything I may be missing or doing wrong:
Installed Android SDK
Installed Java SE DEV KIT 7 update 9
Installed SuperOneClick 2.3.3
Made sure SD card is unmounted
Put phone in USB debugging mode
Turned on Log Switch
Set Log Setting to Verbose
Rebooted phone
Run SuperOneClick 2.3.3
Then I get stuck at step 7 Program stops responding
Hope you might have a clue what to do from here and thanks for your help either way. I tried to send a screenshot but it won't let me post links yet. If you need one send me a email same screen name at gmail
Unlockroot
You need unlockroot wich is better than superone click try it see if it works.
Forgot to explain things better.
in sdk manager you need to select android sdk tools and android sdk platform tools with a ckeck mark and then select install packages.
Same Problem U8652
HUAWEIu8652 said:
in sdk manager you need to select android sdk tools and android sdk platform tools with a ckeck mark and then select install packages.
Click to expand...
Click to collapse
So Im having the same problem and been following along with you guys, tried 3 different ways and continued to get same message. Havent tried the last thing that was advised but was awaiting the reply if it worked. Any news on that last message sent on the 3rd?
idk yet, i got sick of messing with it for a couple of days. Ill try tonight and leave an update on my results.
Sorry
First what android version does it have 2.3.what? if it's 2.3.5 then this won't work ill upload a link on instructions if you have 2.3.5. if you have 2.3.4 the follow sd james's instructions.
HUAWEIu8652 said:
First what android version does it have 2.3.what? if it's 2.3.5 then this won't work ill upload a link on instructions if you have 2.3.5. if you have 2.3.4 the follow sd james's instructions.
Click to expand...
Click to collapse
2.3.6 gingerbread
Has anyone figured out how to root this yet?
Sent from my SGH-T889 using xda premium
iamtimmah said:
Has anyone figured out how to root this yet?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Not to my knowledge. Any advice is appreciated.
So I am trying to root my phone using megatron, but for some reason this always happens:
i[dot]imgur[dot]com/RrZih6j[dot]png (sorry, new members aren't allowed to post links...)
Whenever the phone tries to move the root files to the phone it says "Permission denied"
I have tried restarting the PC and the phone many times, even re-installed the drivers, and ended up even factory resetting the phone.
I am using Windows 8 and v30c on my phone, p925g...
I would appreciate any help on how to fix this, or on a preferred method of rooting
Thank you
nextlevelcolors said:
So I am trying to root my phone using megatron, but for some reason this always happens:
i[dot]imgur[dot]com/RrZih6j[dot]png (sorry, new members aren't allowed to post links...)
Whenever the phone tries to move the root files to the phone it says "Permission denied"
I have tried restarting the PC and the phone many times, even re-installed the drivers, and ended up even factory resetting the phone.
I am using Windows 8 and v30c on my phone, p925g...
I would appreciate any help on how to fix this, or on a preferred method of rooting
Thank you
Click to expand...
Click to collapse
You cant Root ICS With using megatron, megatron is Only For GB
Search Here How to Root
http://forum.xda-developers.com/showthread.php?t=2191698
OptimusRs said:
You cant Root ICS With using megatron, megatron is Only For GB
Search Here How to Root
http://forum.xda-developers.com/showthread.php?t=2191698
Click to expand...
Click to collapse
Alright, thanks, but would the procedure be the same for windows 8? It says the procedure is a tiny bit different to windows 7, does that also apply to windows 8?
EDIT: I also see that in the rooting part of the guide, you have to use "OS_hackingtool" ... I tried using that before but OMAP4430 doesn't "appear and reappear" on my pc... I tried installing/updating the driver by showing hidden drivers anyway, but OS_hackingtool always says "Waiting for OMAP44xx device..." and putting the battery just charges my phone while it's off... can you help me with this also?
Check the tips for Win 8 at the top of this tutorial. Win 8 is even more of a bear regarding unsigned drivers but it can be done (I have not tried it myself)
http://forum.xda-developers.com/showthread.php?p=39269819
OptimusRs said:
You cant Root ICS With using megatron, megatron is Only For GB
Search Here How to Root
http://forum.xda-developers.com/showthread.php?t=2191698
Click to expand...
Click to collapse
drastic00 said:
Check the tips for Win 8 at the top of this tutorial. Win 8 is even more of a bear regarding unsigned drivers but it can be done (I have not tried it myself)
http://forum.xda-developers.com/showthread.php?p=39269819
Click to expand...
Click to collapse
Thank you both, I have finally succesfully rooted my phone with stock ROM, very appreciated
megatron is Only For GB
OptimusRs said:
You cant Root ICS With using megatron, megatron is Only For GB
Search Here How to Root
http://forum.xda-developers.com/showthread.php?t=2191698
Click to expand...
Click to collapse
megatron is Only For GB
Follow this method http://forum.xda-developers.com/showthread.php?t=2366916
GrMo Hady said:
megatron is Only For GB
Follow this method http://forum.xda-developers.com/showthread.php?t=2366916
Click to expand...
Click to collapse
Really????
OptimusRs said:
Really????
Click to expand...
Click to collapse
Hi i would appreciate if someone could help me asap!
Firstly, i've tried 2 methods to root my optimus 4X hd running 4.1.2 JB, but to no avail
The first method i've tried is from here: http://forum.xda-developers.com/showthread.php?t=2180688
the problem is when i double click the ROOT.bat file, nothing happens. the command thing pops up for less than a second saying
: adb is not recognised as an internal or external command...
The second method i've tried is http://forum.xda-developers.com/showthread.php?t=1818502
After installing the systembackuptest app, when i open it, the app just force closes saying 'Unfortunately, Systembackuptest has stopped.'
Please help me im really new at this and would appreciate step by step guide. thanks :laugh:
isaacsmall said:
Hi i would appreciate if someone could help me asap!
Firstly, i've tried 2 methods to root my optimus 4X hd running 4.1.2 JB, but to no avail
The first method i've tried is from here: http://forum.xda-developers.com/showthread.php?t=2180688
the problem is when i double click the ROOT.bat file, nothing happens. the command thing pops up for less than a second saying
: adb is not recognised as an internal or external command...
The second method i've tried is http://forum.xda-developers.com/showthread.php?t=1818502
After installing the systembackuptest app, when i open it, the app just force closes saying 'Unfortunately, Systembackuptest has stopped.'
Please help me im really new at this and would appreciate step by step guide. thanks :laugh:
Click to expand...
Click to collapse
Make sure to install the current LG drivers on your PC, and make sure debugging is turned on as well.
Lord of the Droids said:
Make sure to install the current LG drivers on your PC, and make sure debugging is turned on as well.
Click to expand...
Click to collapse
Yes I've done both of that. I've followed the instructions step by step. Could it be possibly because of my software version? Will it work if I restore my phone to factory settings
Anyone have any clue?
I have the same problem can somebody solve this?
Sent from my LG-P880 using xda app-developers app
Have this problem as I upgraded from V10a rooted to v20a, now I am trying to find a solution
gvelim said:
Have this problem as I upgraded from V10a rooted to v20a, now I am trying to find a solution
Click to expand...
Click to collapse
Sorted now... this is what worked for me
http://forum.xda-developers.com/showthread.php?t=2180688