Database Info

s5830i help needed!!!!

so here i am , i was trying o]to flash stock rom via odin and i used .pit file, it started .. and then it said re-partition operation failed.... now when i click on the power button the screen shows a light but there is no samsung logo, i cannot go into recovery mode but i can go into download mode, i also tried to flash the PDA from 4 shared but it also didn't work... please help me.....

try to Uncheck re-partition or look here showthread.php?t=1552792

/ Ech \ said:
so here i am , i was trying o]to flash stock rom via odin and i used .pit file, it started .. and then it said re-partition operation failed.... now when i click on the power button the screen shows a light but there is no samsung logo, i cannot go into recovery mode but i can go into download mode, i also tried to flash the PDA from 4 shared but it also didn't work... please help me.....
Click to expand...
Click to collapse
there are differences between s5830/s5830i
find a rom for s5830i only
check from fastboot if your phone is unlocked (S-off)
(maybe you try to flash a rom that requires S-off ??)
Code:
fastboot oem status
fastboot oem unlock
do you have a nandroid backup? it can help you to revert to stock rom
you should have one always do a backup before make changes !!
links
http://www.4shared.net/source.html?token=0e95ccde61c2962e03ea
(to flash read instructions...)
http://www.4shared.net/s5830i
if you have nandroid backup this can help

ruscan.calin said:
there are differences between s5830/s5830i
find a rom for s5830i only
check from fastboot if your phone is unlocked (S-off)
(maybe you try to flash a rom that requires S-off ??)
Code:
fastboot oem status
fastboot oem unlock
do you have a nandroid backup? it can help you to revert to stock rom
you should have one always do a backup before make changes !!
links
http://www.4shared.net/source.html?token=0e95ccde61c2962e03ea
(to flash read instructions...)
http://www.4shared.net/s5830i
if you have nandroid backup this can help
Click to expand...
Click to collapse
wtf ???? what is this 4shared.net?
new-aces.blogspot.com is my blog....what is it doing on 4shared.net
anw plz help me man i took my phone to a repair shop and he said he wasn't able to fix now when i turn it on i can see the samsung logo for like 5 secs and then it turns off again, then samsung logo 5 secs then turns off again i tried flashing pda.tar and it flashed successfully but still cannot turn on my phone help?

ObS3SSioN said:
try to Uncheck re-partition or look here showthread.php?t=1552792
Click to expand...
Click to collapse
i tried everythin.... not working now i can see samsung logo but for secs and then the phone turns off by itself and then samsung logo for 5 secs and then the phone turns off again so on....

are there any working stock roms for the s5830i and how to flash them , dont give me pda.tar it isnt working i need an official stock rom plz to fix the brick.. ty

/ Ech \ said:
wtf ???? what is this 4shared.net?
new-aces.blogspot.com is my blog....what is it doing on 4shared.net
anw plz help me man i took my phone to a repair shop and he said he wasn't able to fix now when i turn it on i can see the samsung logo for like 5 secs and then it turns off again, then samsung logo 5 secs then turns off again i tried flashing pda.tar and it flashed successfully but still cannot turn on my phone help?
Click to expand...
Click to collapse
maybe this thread can help you
this ROM seems to be a good one for you phone
-in Windows7/Vista open Odin as administrator
-try other version of Odin
-try to enable "re-partition"
-never use ROM Manager this can destroy your phone
-never use a ROM made for s5830 (you have s5830i)
---------- Post added at 06:03 PM ---------- Previous post was at 05:48 PM ----------
/ Ech \ said:
are there any working stock roms for the s5830i and how to flash them , dont give me pda.tar it isnt working i need an official stock rom plz to fix the brick.. ty
Click to expand...
Click to collapse
believe me a lot of people have problems with this model when flashing
try here for stock rom
enter s5830i in search field
(you need subscription to enable download mode)
also I made a thread for Samsung stock roms here
but there is nobody to answer :laugh:

ruscan.calin said:
maybe this thread can help you
this ROM seems to be a good one for you phone
-in Windows7/Vista open Odin as administrator
-try other version of Odin
-try to enable "re-partition"
-never use ROM Manager this can destroy your phone
-never use a ROM made for s5830 (you have s5830i)
---------- Post added at 06:03 PM ---------- Previous post was at 05:48 PM ----------
believe me a lot of people have problems with this model when flashing
try here for stock rom
enter s5830i in search field
(you need subscription to enable download mode)
also I made a thread for Samsung stock roms here
but there is nobody to answer :laugh:
Click to expand...
Click to collapse
hey man thanks for ur support but roms aren't flashing properly , maybe i need to split em using splitfus, anw if u can tell me how to get into recovery mode using a different method , cz i tried to get into recovery mode volume+home+power and it aint working so if there is any other way using pc or something , that would be great , thank u

/ Ech \ said:
hey man thanks for ur support but roms aren't flashing properly , maybe i need to split em using splitfus, anw if u can tell me how to get into recovery mode using a different method , cz i tried to get into recovery mode volume+home+power and it aint working so if there is any other way using pc or something , that would be great , thank u
Click to expand...
Click to collapse
to flash by Odin put your phone in download mode
Download Mode : Home + Vol Dn + Power Button this is not working ?
if not try to remove battery for a few s then put it back
what is your Odin version ?
here is Odin from sammobile site
to flash enter download mode
in Odin
OPS – inlcuded with Odin from sammobile site
Boot – DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.md5
Phone – MODEM_S5830iXXLB1_REV00.tar.md5
PDA – PDA_S5830iJPLB1_REV00.tar.md5
CSC – GT-S5830i-MULTI-CSC-OJPLA5.tar.md5
EFS -None
OnePackage - None
Click to expand...
Click to collapse
something like this maybe file names are not the same I gave an idea only
if this is not working check "re-partition" then flash again

ruscan.calin said:
to flash by Odin put your phone in download mode
Download Mode : Home + Vol Dn + Power Button this is not working ?
if not try to remove battery for a few s then put it back
what is your Odin version ?
here is Odin from sammobile site
to flash enter download mode
in Odin
something like this maybe file names are not the same I gave an idea only
if this is not working check "re-partition" then flash again
Click to expand...
Click to collapse
thanks bro i was able to fix it i flashed xxkl1 and used pit file and csc and phone and pda and ticked repartition.. ty anw ! i hit the thanks button i really appreciate ur support

/ Ech \ said:
thanks bro i was able to fix it i flashed xxkl1 and used pit file and csc and phone and pda and ticked repartition.. ty anw ! i hit the thanks button i really appreciate ur support
Click to expand...
Click to collapse
Man I like your last answer you solved your problem ! Good job !
I like to contribute solving problems because I hate problems :laugh:
I have had an Android phone made a custom ROM
and.. destroyed the phone with overclocking ...
now I have to buy another phone and Galaxy Ace/ Nexus is an option
Galaxy Ace is a good phone but there are problems when flashing so be careful when flashing again!
there are options to play with when flashing like check re-partition or use correct version of Odin
and sammobile.com is best site to check when having troubles !

How to ROOT GNote N7000 N7000XXLS2 4.1.1

Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D

Root JRO03C.N7000XXLS2
JuniorLima said:
Hello Friend, I need your help too, I'm from Brazil and just upgraded my Galaxy Note N7000 for N7000XXLS2 ROOM 4.1.1, and I wonder if there is already proceeding to ROOT this room.
Remember that I downloaded from this site sammobile.com room. So what procedure should I follow to do or perform root this room? Thank you brother :: D
Click to expand...
Click to collapse
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
Click to expand...
Click to collapse
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.

toni_gon said:
I've tried other root methods the whole afternoon, none of them work yet.
---------- Post added at 08:45 PM ---------- Previous post was at 08:40 PM ----------
Once ROM'd this cannot be reversed back to ICS. I used Odin to re-flash the ROM to get the SGN to reboot properly. Its fully functional again:fingers-crossed:.
Click to expand...
Click to collapse
I managed to make the ROOT ... if you want to know how to do is just say that I post here

how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium

vasyno1 said:
how can i do that? i am trying this about 2 days and i cannot root it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
just a minute, is that I'm from Brazil and I need to translate to English tutorial for you ok.
Ae ... you will like, it is not difficult the process is fully functional ... just a minute ..

[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.

can yoy give me the download links for files?

vasyno1 said:
can yoy give me the download links for files?
Click to expand...
Click to collapse
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun

rchaker said:
i used odin pda to install philZ-cwm6-xxls2-xjb-2.7.tar.md5 frm http://forum.xda-developers.com/showthread.php?t=1901191
later i copied Root_SuperSU0.95.Only-Signed to sd card i enteredrecovery mod and install zip from card
@ the end i installed triangle and everything went ok
have fun
Click to expand...
Click to collapse
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug

JuniorLima said:
Where did you get this process? I'd rather spend the Odin PDA KERNEL HYDRACORE life .... CWM then passes via the Kernel-PhilZ cwm6 ... was so I could do on my phone!!
Hydracore Kernel: http://forum.xda-developers.com/showthread.php?t=1749863 (V7 may be the same)
Kenel PhilZ-cwm6: http://205.196.121.32/yldwgfctn3vg/c114d2yobdvhyl4/PhilZ-cwm6-XXLS2-XJB-2.7-signed.zip
Running Wipe data factory / wipe cache / wipe dalvik after each flash
Triangle Away .... to remove triangle and binary counter ... (can be found in Google Apps)
has nothing to err .... hug
Click to expand...
Click to collapse
i ve done it on my n7000 and everything went ok

Strange results
JuniorLima said:
[SIZE="<font><font>6</font></font>"][SIZE="<font><font>7</font></font>"]Performing the Root[/SIZE][/SIZE]
1-Have a micro SD card external memory and copy it to the file Philz Kernel 2.7. He will be key to your handset to work in step 7. Save it to a folder that starts with the letter A to be located more quickly (hint staff);
*
2-Download the Odin 3 v 1.87, unzip and run it. Now go to PDA and locate the file Kernel v5.3 GL Hydracore STD that you've already downloaded. Do not touch any other option Odin PC. Leave everything exactly as it is!
*
3-Turn off your phone (and make sure you have at least 80% battery charge);
*
4-Hold the Power + Home button + volume down to get into Download Mode / Odin Mode. Press the volume up and you're ready to install Kernel v5.3 GL Hydracore STD;
*
5-Connect your device to your computer using the USB cable. (WARNING! If your computer does not recognize your device, download and install Samsung Kies on your computer and then connect your device to have the drivers installed);
*
6-Once the ODIN PC indicate recognition of your device, click Start and NOT UNPLUG YOUR PHONE NO WAY! AVOID USING THE COMPUTER UNTIL THE INSTALLATION WAS DONE;
*
7-Wait for the device to restart. Probably he can not leave the home screen. Do not worry. Turn it off and remove the battery for 1 minute. For some reason I can not explain the GL Hydracore, even v7 is not working on Galaxy Note with Android 4.1.1 stock;
*
8-Now replace the battery and get into Clockworkmod (simultaneously press the Power + Home + Volume Up) and go to "Instal Zip from SD Card" and then "Chose External Zip from SD Card" and select the file Kernel Philz 2.7 CWM you downloaded and saved on your micro SD card. Select it and choose "yes" (Thanks to Junior Lima to discover that step tutorial)
*
8-Wait for the device to restart. Ready to Root and Clockworkmod device.
*
With this procedure you will increase the binary counter and get a yellow triangle every time you start your machine. Do not worry. Download the app Triangle Away v 2.10 and run it.
*
Okay, your system will be as an officer again.
Click to expand...
Click to collapse
I had to use Odin to flash the Philz-cwm6-xxls-x2JB-2.7.tar file as it would not reboot after flashing hydracore. But the root was made with Super SU appearing in the apps drawer.
The second strange thing was no CWM recovery was installed, I had to get it from the play store and use the app to flash CWM.
But it's rooted now.
The next issue seems to be the Supernexus ROM from Faryaab, as it seems to have Build Prop issues.
A luta continua...

One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G

gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.

toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
I've compared the buildprop files of both ROMS, does anyone know what has to be edited out of the buildprop file of the JB rom to allow installation of the SuperNexus ROM?
Perhaps the Samsung hidden attribs?

toni_gon said:
I tried that and It did not work, Seems to me the leaked ROM has issues with other kernels.
Click to expand...
Click to collapse
is really this room is having trouble working with the Kernel's working with the other's room ... the only room that is working with XXLS2 as I know, is the PhilZ. Regarding Hydracore, friend, we passed this kernel first, to win the CWM machine understand? because from it as we flash the kernel PhilZ ...

gflyer said:
One question.
I do not understand the need to flash Hydracore.
Is it not possible to just flash Philz directly from stock recovery?
I understand correclty Phils has both CWM and root.
correct?
thanks
G
Click to expand...
Click to collapse
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!

JuniorLima said:
Me did not work so ... I had to spend the first kernel of Hydracore .... the more strange, is that after flashing the Kernel Hydracore, the device will not turn over ... it shows the screen with the name of N7000 and turn it off ... it will not start. Only after passing the kernel PhilZ the device connects. I can not understand why, but if anyone knows, feel free to tell us .... thanks!!
Click to expand...
Click to collapse
I achieved root in the same way, but could not boot into CWM after installing Hydarcore, I used Odin to flash Philz, after flashing Hydracore. The only remaining issue is to install the custom ROM SuperNexus from Faryaab, I keep getting build prop errors.
I've tried modding the Faryaab buildprop to almost the same as the Sammy XXLS2 and I still have not achieved it...
Anyone have any ideas?

Could this help?
http://forum.xda-developers.com/showpost.php?p=34577056&postcount=2

rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
Got it ... then the two processes work perfectly ... because I ran the process described at the beginning of the post and it worked fine ... Now it's a matter of taste ... even more

full instructions
rchaker said:
i ve done it on my n7000 and everything went ok
Click to expand...
Click to collapse
hi... good day... im planning to root my Galaxy Note running on official XLS2 4.1.1
this is my first time to root my phone and i wanna be sure that im doing it properly...
Could you please give me a step by step instructions as to how to root my phone?
thanks ain advance... and i appreciate your help

[Q] Need root for Galaxy Mega 2

I have tried every root method except for vroot or anything that doesn't exist on xda
Cause one click root sound too good to be true (Well except if it's on xda)
I have waited a month for root
Why no root,no forums,no support for this device yet?
(Well except there is cf auto root for older version)
I think i have reply too much asking for root
I decide to create new thread interest
What should i do?
Wait a just a little bit more?

skyhot004 said:
I have tried every root method except for vroot or anything that doesn't exist on xda
Cause one click root sound too good to be true (Well except if it's on xda)
I have waited a month for root
Why no root,no forums,no support for this device yet?
(Well except there is cf auto root for older version)
I think i have reply too much asking for root
I decide to create new thread interest
What should i do?
Wait a just a little bit more?
Click to expand...
Click to collapse
This is how you root your galaxy mega 2
http://androidxda.com/root-samsung-galaxy-mega-2-sm-g750f
## Hit the thanks button if i helped u

Mr.WoW said:
This is how you root your galaxy mega 2
http://androidxda.com/root-samsung-galaxy-mega-2-sm-g750f
## Hit the thanks button if i helped u
Click to expand...
Click to collapse
I already tried CF auto root and every possible method on xda (It's written in my post........)
I'm just trying to get mega 2 some attention

skyhot004 said:
I already tried CF auto root and every possible method on xda (It's written in my post........)
I'm just trying to get mega 2 some attention
Click to expand...
Click to collapse
Oh .. you mean that CF Auto root didn't work for you
I thought it works always

Sewrizer said:
CF autoroot always works.
You must have done something wrong. Try that method again and report back please.
Click to expand...
Click to collapse
I have already done it again before making a thread
It's just not work
Well there's error something like : Can't write to x
It's can't write to cache or nand i can't remember
Also! my mega 2 is in the latest version and the build number is different from cf auto root file
But it's written that it's may work and there's a high chance that it will
CF auto root build number : KTU84P.G750FXXU1ANI1
My build number : KTU84P.G750FXXU1ANJ1
I can flash back my stock firmware so it's not write permission problem

Same problem here.. i have galaxy mega 2 too.. always failed when try rooting this phone..
But i have SM-G750H not SM-G750F .. anyone can please help me? I need root my phone.. thanks

stephanus88 said:
Same problem here.. i have galaxy mega 2 too.. always failed when try rooting this phone..
But i have SM-G750H not SM-G750F .. anyone can please help me? I need root my phone.. thanks
Click to expand...
Click to collapse
Hi, any update regarding rooting mega 2 (KTU84P.G750FXXU1ANJ1) ??
I'm really getting too tired trying every method availible on web but no luck to get it rooted yet!.. always fail in odin

numan8 said:
Hi, any update regarding rooting mega 2 (KTU84P.G750FXXU1ANJ1) ??
I'm really getting too tired trying every method availible on web but no luck to get it rooted yet!.. always fail in odin
Click to expand...
Click to collapse
SM-G750H? CF-AUTO-ROOT Before rooting please flash the matching FIRMWARE.

Hello, my phone is SM-G750F not SM-G750H.
So, will this file work with it? .... i have tried CF-Auto-Root for SM-G750F from their website, but it always fail in oden!.

numan8 said:
Hello, my phone is SM-G750F not SM-G750H.
So, will this file work with it? .... i have tried CF-Auto-Root for SM-G750F from their website, but it always fail in oden!.
Click to expand...
Click to collapse
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT

LS.xD said:
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT
Click to expand...
Click to collapse
hi,
well, this matter i've missed and just noticed now, and seems it is the cause of the failed install.
the build numbers for the two phones i was trying to root are G750FXXU1ANGD and G750FXXU1ANJ1 . But when i've just checked again your post , the build number that you mentioned is G750FXXU1ANI1.
I'm downloading now the proper (G750FXXU1ANI1) from sammobile , and going to flash both of the phones and then try to root them with the file you showed above , hopefully it will work !.
thanks alot LS.xD

Update - fail again!
LS.xD said:
Some posts before there were a post with H not F. So i got it wrong. No matter
Use CF-AUTO-ROOT for SM-G750F instead
What the error shown up in ODIN?
Its the same way i described before. First flash the ANI1 firmware for your region and then use CF-AUTO-ROOT
Click to expand...
Click to collapse
numan8 said:
hi,
well, this matter i've missed and just noticed now, and seems it is the cause of the failed install.
the build numbers for the two phones i was trying to root are G750FXXU1ANGD and G750FXXU1ANJ1 . But when i've just checked again your post , the build number that you mentioned is G750FXXU1ANI1.
I'm downloading now the proper (G750FXXU1ANI1) from sammobile , and going to flash both of the phones and then try to root them with the file you showed above , hopefully it will work !.
thanks alot LS.xD
Click to expand...
Click to collapse
Hello... plz help
i did downloaded and flash this version from sammobile (G750FXXU1ANI1_G750FOLB1ANI1_G750FXXU0ANI1_HOME.tar.md5)
and after i tried to flash the cf-root file (CF-Auto-Root-mega2lte-mega2ltexx-smg750f.tar.md5) still get the error in odin (see attachment).
please advice me what shall i do more to get this thing rooted.

numan8 said:
Hello... plz help
i did downloaded and flash this version from sammobile (G750FXXU1ANI1_G750FOLB1ANI1_G750FXXU0ANI1_HOME.tar.md5)
and after i tried to flash the cf-root file (CF-Auto-Root-mega2lte-mega2ltexx-smg750f.tar.md5) still get the error in odin (see attachment).
please advice me what shall i do more to get this thing rooted.
Click to expand...
Click to collapse
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?

LS.xD said:
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?
Click to expand...
Click to collapse
yes i did wipe user data and wipe cavhe right before i flash cf-root.

numan8 said:
yes i did wipe user data and wipe cavhe right before i flash cf-root.
Click to expand...
Click to collapse
I don't get it. FW + ROOT match your phone and its still not working. I'll try to get some more informations.
Is Samsung KIES installed on your computer? Uninstall it!
USB debugging enabled? Enable it!

LS.xD said:
Did you boot up android and performed a factory reset before using CF-AUTO-ROOT?
Click to expand...
Click to collapse
LS.xD said:
I don't get it. FW + ROOT match your phone and its still not working. I'll try to get some more informations.
Click to expand...
Click to collapse
yes, it just like that!! ... i bought this phone 3 days ago and since then i'm struggling just how to root it

numan8 said:
yes, it just like that!! ... i bought this phone 3 days ago and since then i'm struggling just how to root it
Click to expand...
Click to collapse
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
@numan8 I need to know if you run Win 7/8/8.1 - 32 or 64bit

LS.xD said:
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
Click to expand...
Click to collapse
please do, i'm still waiting..
appreciate if you can do fix this headache root file.
attached the fail screenshot using the new odin you've given

numan8 said:
please do, i'm still waiting..
appreciate if you can do fix this headache root file.
attached the fail screenshot using the new odin you've given
Click to expand...
Click to collapse
SOLUTION:
I extracted the recovery from CF-AUTO-ROOT and converted it to ODIN flashable recovery SM-G750F
First flash the recovery.tar.md5 and then flash the CF-AUTO-ROOT you already downloaded.

LS.xD said:
KIES uninstalled, USB debugging enabled in the android rom
if you did both try using latest ODIN 3.10.6
I'm actually looking for a matching "PIT" file
EDIT: I found a valid fix for the cache.img problem. I will prepare the needed files for you and be back soon
@numan8 I need to know if you run Win 7/8/8.1 - 32 or 64bit
Click to expand...
Click to collapse
LS.xD said:
SOLUTION:
I extracted the recovery from CF-AUTO-ROOT and converted it to ODIN flashable recovery SM-G750F
First flash the recovery.tar.md5 and then flash the CF-AUTO-ROOT you already downloaded.
Click to expand...
Click to collapse
i did follow what you said, flash your recovery file and it show pass in odin ... then flash the cf-root but fail again.
see the screenshots for more details

(Guide) Root Note 3 SM-N900 5.0/Install Recovery

Here is a full guide on how to root and install custom recovery on Galaxy Note 3 N900 Lollipop
(THIS WILL VOIDE WARRENTY,I AM NOT RESPONSIBLE FOR IF YOUR DEVICE BRICKED)
How to do root:
NOTE 1- MAKE SURE YOU DOWNLOAD THE FILE FOR YOU CORRECT ROOT FILES, THE FILES ARE DIFFERENT FOR 4.4.2 AND DIFFERENT FOR 5.0
NOTE 2- IF YOU KNOW YOU WANT TO FLASH A ROM THEN NO NEED TO ROOT YOUR DEVICE, SKIP THIS AND GO TO HOW TO INSTALL CUSTOM RECOVERY!
Step 1)Get the CF root file compatabile to your vairant from here.. http://forum.xda-developers.com/showthread.php?t=2466423
Step 2) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 3) Now open ODIN on your PC and connect your Galaxy Note 3 to your computer.
Step 4) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 5) Click on pda in odin (if odin 3.09 choose AP) and choose the ".tar" file.
Step 6) Tick "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart
How To Install Custom Recovery
Download The Recovery Image You Want
For TWRP:
Download TWRP IMG From Here:
http://dl.twrp.me/ha3g/
(I dont have other recovery img links.. its your homework )
After downloading go to playstore and download :
Flashify: https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
AFter Installing Flashify Open it and grant SuperSu Permission
Then Choose: Recovey Image
Then: Choose A File And browse the twrp.img file you downloaded and Select it and select yup..
It Will Flash TWRP For Your Phone
And Then Select Reboot.. It Will Reboot Into TWRP Recovery
ROCK AND ROLL NOW
Credits:
@CF-Auto-Root
@TWRP Recovery

not working for me,it starts for few second and then i get the message GAIL

shalilou said:
not working for me,it starts for few second and then i get the message GAIL
Click to expand...
Click to collapse
Which Note 3 You Have?
This Method Is Tested In Note N900 Indian Official 5.0

Is there root for Note 3 N900s available?

If you wanna root kitkat its available but if you want rootfor lollipop its not available now... may be out soon.. you can check yourself from cf root website.. only n900s kitkat available
Sent from my SM-N900 using XDA Free mobile app

tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !

Miaow93 said:
tks for your detailed guide!
and there have another way to root your device:
1.download supersu.zip to your phone memory or sd card .
2.flash rec customed by odin
NO CHICK THE AOTUREBOOT! you can wait few secs after flash over
3 . Manual reboot (by volume up + home button and power )into rec and flash SU.zip
4.reboot and enjoying it !
Click to expand...
Click to collapse
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..

dhanmohan said:
yep i tried it.. it didn't worked for me bro.. so i figured this one and it worked..
Click to expand...
Click to collapse
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP

Miaow93 said:
as we know, phone will flash the rec failed if you select reboot button directly while flash the TWRP.rar though ODIN .
mostly rebooting into rec is still officials,.
so somebody flash it no select reboot , in that way ,we can flashed it successly by manually reboot after a few secs or more than ten secs,
i don't know why but it can be completed.
after that, we can flash su.zip as same as a rom.
i do not know what is your problem ,
forgiving my poor English and i try to describe what I mean clear。
i ll tell you what i know : )
PS:in china ,we use the CWM rec more time than TWRP
Click to expand...
Click to collapse
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..

dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
dhanmohan said:
i tried to flash twrp through odin but its still stock recovery..didn't flashed twrp.. so i root through cf root and flashed twrp through flashify app and it worked... i use only twrp.. but you can try other Recovery's also.. but i didn't tried other Recovery's..
Click to expand...
Click to collapse
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god

Miaow93 said:
Yep!
I just remembered something a few minutes ago.
the twrp can flashed success just in android 4.4 or 4.4's BL .
Forgive me waste your time.
my previous words without trial,:-[
if you want to try the cwm rec ,please tell me .
I can think of a way to share with you, that would be a bit different.
---------- Post added at 08:36 AM ---------- Previous post was at 08:21 AM ----------
a little regret ,the new version cwm does not support English.
There is embarrassing for me ,
oh,god
Click to expand...
Click to collapse
ohh i don't know about cwm as i don't use them

While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app

skssha said:
While flashing recovery pl ensure usb debugging enabled in developpers option. For me flashing of recovery failed till i enabled usb debugging. This is my experience.
Skssha
Sent from my SM-N900 using XDA Free mobile app
Click to expand...
Click to collapse
you mean usb debugging should turn off while installing recovery!

Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.

Prolab said:
Thanks. Finally flashed stock Lollipop Rogers ROM and have rooted and installed TWRP recovery.
Click to expand...
Click to collapse
Just wondering, has your KNOX been triggered?

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes rooting device will trigger Knox.. If you want to reset Knox there's a method in general section I guess.. Boot loader but its for kk.. If u flash it,it will cause bootloop can reset Knox then u have to flash stock and u r fully official

Individ3 said:
Just wondering, has your KNOX been triggered?
Click to expand...
Click to collapse
Yes, with this method.

help
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop

Mr_Za said:
Hi I have note 3 4G lte version
I want to root it can any one help me
I'm running lollipop
Click to expand...
Click to collapse
Just download cf root of your version and make sure that cf file is for lollipop of ur note 3 version and follow the process

Thank you I rooted my device successfully

S6 bricked after root, tried everything

Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9, kies and smart switch (which says my device is not supported)
What can i do now?
Please help me

Speed™ said:
Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9 kies and smart switch (which says my devie is not supported.
What can i do now?
Please help me
Click to expand...
Click to collapse
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?

Faspaiso said:
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?
Click to expand...
Click to collapse
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode

Speed™ said:
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode
Click to expand...
Click to collapse
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.

I will try it. I'm downloading the firmware right now (so slow)
Is there any way to turn off the phone? I hope it won0t suffer burn in effect because of the static image.

Faspaiso said:
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.
Click to expand...
Click to collapse
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?

Speed™ said:
I did exactly what you said but nothing. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''

afehst said:
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''
Click to expand...
Click to collapse
I don't think i would help because i neither flashed the firmware. Anyway thanks

Speed™ said:
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?

Faspaiso said:
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?
Click to expand...
Click to collapse
I was on 5.0.2.
I used odin 3.10.6, clicked on AP, swlected the TAR file then clicked start. Everything goes OK until the end when odin displays FAIL. Really dunno what problem coulb be

Bring your S6 back to Samsung for warranty repair.

What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app

Cyanandroid said:
What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I can,t access to recovery but can access to odin mode (download mode)

Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Sent from my A0001 using XDA Free mobile app
---------- Post added at 06:42 AM ---------- Previous post was at 06:40 AM ----------
If not then just download the samsung galaxy stock rom zip amd flash it using philz.U can also root ur system using philz recovery as it has an built in rooting option...
Hope it helps
Sent from my A0001 using XDA Free mobile app

Speed™ said:
I can,t access to recovery but can access to odin mode (download mode)
Click to expand...
Click to collapse
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
Cyanandroid said:
Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Click to expand...
Click to collapse
He is simply asking for help. How should he know?

Faspaiso said:
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
He is simply asking for help. How should he know?
Click to expand...
Click to collapse
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.

Try flashing philz recovery.i actually prefer it.
Sent from my A0001 using XDA Free mobile app

Speed™ said:
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.
Click to expand...
Click to collapse
Well if you succesfully flash 5.1.1 your phone works again. No idea what's wrong with your Odin tho. Try delete all the Odin files and download it again (https://www.androidfilehost.com/?fid=95916177934555153).
I THINK you're on 5.1.1 bootloader and modem as I got the same error as you. I flashed 5.1.1 bootloader and modem and could not start phone before 5.1.1 firmware was flashed.
You COULD try follow this again STEP FOR STEP when re-downloaded Odin (and deleted all the old Odin files). http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3 REMEMBER to download the right version for your device. Like if you have SM-G920F it's JUST below the guide, else scroll further. Remember the bootloader and modem should be flashed at the SAME time and is not for the PDA slot. If it succesfully flash them, then try 5.1.1 stock firmware now.
But step for step the guide and be aware of those (DO NOT connect your phone before this step, otherwise it won't work!).
If you don't want to try that all over again (as I THINK you're on 5.1.1 bootloader and modem) you could try download download Odin again (as linked) and try different USB ports + PC's. If you try to flash bootloader + modem again, then try different PC's and USB ports too.

Wait wait guys... I just flashed a newer versione of twrp (
Why the hell i was flashing an older version??? ) and BOOM...it restarted and surprise...5.1.1 upgrade with my data and files (nothing touched and deleted).
I can't figure it out why root on 5.0.2 didn't work...
Finally i got it back working at least.
Thank you guys form you quick support and thank you Faspaiso for the help
Btw, root on 5.1.1 not already available?

Smells like reactivation lock.