After an attempt at installing CWM my phone now only vibrates. I followed all the steps ,replace the recovery.img with the new one ,then unhooked from the comp pulled the battery then installed the battery and powered up holding both volume buttons down along with the power button and instead of a short vibration followed by start-up it just vibrates continuous . now the only thing I can access on the phone is the recovery folder via hooking to the computer.I cant access the download feature by holding down volume down plus power ,nothing happens .If I just try tp power up normal it vibrates untill I pull the battery and the same if I power and hold both volume buttons. Please can some one bail me out of this nitemare??
Related
Here's my nexus condition:
It won't turn on, i've tried every possible method; hold power button (10s), hold volume down + power,
volume up + power, volume down + up + power, It still won't turn on.
I connected it to charger and it entered google logo but then off and on for several times. I sometime managed to get
into bootloader mode, but then again it off again.
the interesting part is when i hit my nexus to my palm, it sometimes turn on and enters google logo but then bang,
it's back off again.
Could someone please help me get out of this misery?
yukarundeng said:
Here's my nexus condition:
It won't turn on, i've tried every possible method; hold power button (10s), hold volume down + power,
volume up + power, volume down + up + power, It still won't turn on.
I connected it to charger and it entered google logo but then off and on for several times. I sometime managed to get
into bootloader mode, but then again it off again.
the interesting part is when i hit my nexus to my palm, it sometimes turn on and enters google logo but then bang,
it's back off again.
Could someone please help me get out of this misery?
Click to expand...
Click to collapse
Sounds like a problem with the power button.
It should be a problem of power button cause if its has gone inside.. it will always keep shutting your phone
Hi I need help urgently. I wanted to boot my phone into recovery mode so i after i switched the phone off, i pressed the power button + volume up. My phone was connected to pc all along. problem is, i removed both my fingers off the power and volume up the moment i saw the "OPPO" boot logo, and realizing that the screen is blank, i removed the power cable connecting my phone to the pc. Now, my r7f refuses to boot.
Weird thing is when i connect my phone to the pc, sometimes the pc recognizes an unknown device thats "malfunctioned". This is called 'bricked'? How do i solve this?
I cant even switch on my phone or remove the battery due to its built-in battery. had 70+% battery at the point of occurence.
My R7f goes into the fastboot mode when i hold the power and volume+ . I usually enter to the recovery mode by holding the power and volume -
You have to hold the buttons for more than 2-3 seconds even the boot logo is shown keep holding them.
I have a Lg G Pro 2. Few days back it got bricked by its own( a crazy fact). That time it was showing QHSUSB_BULK. I figured it out as 9006. Took the phone to a local service shop. Today I got it back and found that nothing had happened to the phone, except worse. Now it is not detected by PC, only green light blinks for some time if tried to power on. And then everything is black and cold as death.
I think it have been flashed with wrong ROM. Anybody here can guide me with the test points of Lg G Pro 2 (D838 F350) ? So that I can force it to QHSUSB_BULK ? Or any step by step advice to get it up ?
I am in real need of assistance, and thanks in advance for any sort of help. Best Regards.
I would like to mention that the phone indicator blinks for sometime if I try to power it on, as it does on boot, but nothing else is there. No recognition by PC, no presence in Device Manager. Blinks for sometime, stops, again starts blinking... and this goes on at regular short intervals. The area around the camera gets warm after sometime. Everything loops till I pull off battery.
Now, am I missing something ? Is the problem not as deadly as I am thinking ? Is it soft bricked ?
Hi, I not sure how it got bricked I never brick LG device.
Normally if anything happen we try pull battery out and put it back in, try then to turn the phone on.
Have you try connect to to pc with USB cable, one end of USB connnect to pc and other end connect to the phone. Then try press Power + Volume Up or Power + Volume down, this is to try to get into phone download mode. If you can get into download mode you can flash the kdz file to make it useable again.
Or without the USB cable we want to get to factory reset mode by use hardware method try press:
- Power + Volume Up or Power + Volume down
- If you see LG logo come up release the buttons you press above 1-2 second
- Press again Power + Volume Up or Power + Volume down
- Until it show and ask to use volume up/down button to select choice, say yes
Caution factory reset will delete all data on the phone and reset it as when you bought it new.
- Again it will ask for factory reset, use Volume up/down to choose and select yes for factory reset
turn on the phone and when light is blink press volume up or down button for some time and see if it it is detected as usbhulq?
I think my phone has gone forever, but I'd like to check here if someone can save it.
I've been using this phone for 3 years, no changes besides OTA updates. Suddenly, screen froze and I held POWER button until it turned off. Then it rebooted and showed honor powered by android in blue background. It shows only that screen for a minute or so and then reboot again. If I hold POWER button, it'll reboot again (it won't turn off). The only combination of keys that produces different result is combo of VOL UP + VOL DOWN + POWER, which will turn screen black, then vibrate and then turn off (if I release keys before it vibrates, it'll start over).
I tried to put dload\UPDATE.APP in sdcard and nothing happened. I also tried all combinations described in a post I found in modaco forum (www[dot]modaco[dot]com/forums/topic/377629-honor-8-button-combinations-clarified/) and I don't get any other result besides what I described before.
Is there any way to fix it??
Did you try to press power and vol- ? When it boot, release power and keep your finger on vol- while connecting to a computer using USB. Normally, you should access to fastboot
EDIT: Oh sorry, in hurry I have not pay attention to the website you quote :'(
Hello,
as stated, i got my power button broken probably due to water (not that waterproof huh?). The power button has worked for a few weeks, sometimes it was really sloppy and unresponsive, and stopped completely, and when my battery completely depleted i am now unable to power it on. I am able to get into download mode from where there is an option to restart the phone but of course it requires to press vol down + power button.
Have you got any magic tricks to turn on a turned off s10e with the power button broken ?
Hello! The solution: press volume down + bixby button and now plug usb c data cable (computer->phone), wait 3-5 seconds and phone starting in download mode. From download mode you can restart the phone with volume down button.