I posted this here accidentally. I also have it in the AT&T section, which is what my phone is.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Connect Sony DriveLink (MirrorLink) With GS4
Full credit to AuRoN89 for uploading HERE.
Intro
This is a tutorial for how to use Sony's car system(s) to their maximum potential. I cant guarantee this works with every model, however, because I only have the XAV601BT (seen in picture above). Before you do this, you need to make sure the latest firmware is installed. For a guide on that CLICK HERE.(NOTE: This link is for the XAV601BT. If you have a different device, go HERE, enter your model number on the bottom left, and click "Update to the Latest Firmware")
Step 1: Enable "Unknown Sources"
From the Home screen, tap Apps > Settings > More tab > Security.
Tap Unknown Sources.
A check mark is displayed to indicate it is active.
This is to make your phone allow the instillation of the modded DriveLink.
Step 2: Download the Mod
On your phone, go to the following link (I will post mirrors at the bottom):
www.sestogomme.it/drive_link/DriveLink.apk
Click to expand...
Click to collapse
Step 3: Install
Now, from the Home screen, tap Apps > Downloads > DriveLink.apk.
You should see this:
Scroll to the bottom, and hit Install.
Note: This app does not cost money. The reason it says that is because it has the ability to answer and make phone calls/texts.
Step 4: Connect to USB
Finally, you need to open MirrorLink on your system. Connect your phone (use your charger cable), and the DriveLink application should instantly start.
Note: You will still get an error on the system when you plug your phone in saying the phone isn't compatible, but you can just ignore it.
Conclusion
I really hope this could help! I spent a while troubleshooting this problem, and luckily found a working link by AuRoN89. It managed to save me money on an additional navigation system. If you have any questions or concerns about this, I will try my best to help. I didn't make this modded version, so I can't answer any questions about what was changed. This guide was simply made as a resource for other people who couldn't find any information on this.
Mirrors
Thank you very much, I worked well with my SG4.:good::good::good::good::good:
Samsung S4 v 4.4.2
Apk closed........
Enviado desde mi Transformer Prime TF201 usando Tapatalk 2
AuRon's mod will only work till 4.3 ... if you update to 4.4.2 it wont work ... I'm waiting for a new version.
[[°]
Thanks im waiting New apk
Enviado desde mi Transformer Prime TF201 usando Tapatalk 2
I Have Android 4.3 on my Note3. No luck with using this mod
The application will launch but when I connect the usb cable I just get the device not supported message.
Kitkat update
Hi,
Is there any news on getting this working since the 4.4.2 update to Kit-Kat?
Simon
simonrob77 said:
Hi,
Is there any news on getting this working since the 4.4.2 update to Kit-Kat?
Simon
Click to expand...
Click to collapse
I have an at&t S4....would love to have it working for Kit Kat too! Currently on 4.4.2
gs4 mirror link with alpine ive- w535
hi all. we have the gs4 and would really like to be able to link with our alpine head unit wirelessy (not via USB Cable) to use the drive link. can this be done yet? thankyou
Drive Link for KitKat!!!
Please, we need to Drive Link for Kit Kat!!! anybody know how to make it work??
On my S4 its working fine but today the kitkat release has been available and i cant update my phone because of that.
SGS4 DriveLink with Pioneer AppRadio3
Recently installed a Pioneer AppRadio3 head unit. Had DriveLink working perfectly until AT&T pushed the KitKat update OTA. Now DriveLink won't open. I want my old ROM back.
Please i need it too for kit kat. Anybody know the way?
Are there any new version available for kitkat 4.4.x?
Galaxy S4 4.4.2 Mirrorlink
Does somebody connect this phone trought mirrorlink tecnology with drivelink app or whatever? I know about the compatibility of S3 but not my terminal.
trundas said:
Does somebody connect this phone trought mirrorlink tecnology with drivelink app or whatever? I know about the compatibility of S3 but not my terminal.
Click to expand...
Click to collapse
Only with 4.3 firmware and modified apk... Since 4.4.2 update it stopped working =/
Let's hope there's a new release soon...
[[]]
Any more news? I have installed custom lollipop (on the internet it saids mirrorlink is supported in lollipop) but can't find it en if I install drive link I got the same error (drive link is stopped working).
Bump. I was unfortunate to be stuck with an ATT s4 that had the 4.4.2 update preinstalled (**** you ATT)... and I bought a used sony XAV-601BT thinking this would work... nope.
I have a note 4 with mirror link, and a XAV-601BT, is there no hope for me? I did the firmware update on the head unit, but nothing. Phone just kind of ***** out saying its in mirror link, and head unit keeps saying reconnect phone.
Related
Anyone ever use one of these, I am seriously considering for a skype device.
Please feedback would be great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.pyramidistribution.com/MagicPro-iGoGo-TV-Android-TVBox-Builtin/M/B006RIU8QA.htm
Looks very cool, no play store support but definitely cool...
Tell me what you think, about to drop the dimes on this.
Play store now supported with firmware update.
Ok I bought this thing and it came today. Freaking awesome so far. No play store, but amazon app store is sufficient.
Using my 55 inch LCD, hdmi cable supplied, WiFi, go launcher.
Sent from my HTC Mecha using Tapatalk 2
New Firmware for Google Play Store
They have released new firmware to support Google play store?
androwS said:
They have released new firmware to support Google play store?
Click to expand...
Click to collapse
Sweet Gonna have to check that out when I get home.
Sent from my HTC Mecha using Tapatalk 2
Anyone else using this and have a dreadfully slow internet connection
Sent from my HTC Mecha using Tapatalk 2
Magic pro - Skype
Could you please share your experience using skype. how is quality of camera and does mic pick up sound from approx 10ft ?
How are other apps look on TV since the UI is not designed for TV but phone ?
regards,
TM
tarakmehta said:
Could you please share your experience using skype. how is quality of camera and does mic pick up sound from approx 10ft ?
How are other apps look on TV since the UI is not designed for TV but phone ?
regards,
TM
Click to expand...
Click to collapse
The use of the device is a little quirky at first. Getting use to the air mouse takes a little bit, but not bad. Skype works good, I did have to get a new hdmi cable since the supplied cable took a **** only hours after first use. I did switch the launcher to use go launcher. The stock launcher is very generic adw. I use this on my 55 LCD, not a good plan If you wanted a netflix machine. The android app streams at a super low resolution, and when shown on a big screen it sucks.
Some live wallpapers don't work, and apps made with low resolution graphics suck.
All in all, for skype it is great, the reason I bought it. Gaming is ok, the air mouse is a cool feature after learning to use it. Now that the play store works, I'm a happy guy.
The memory storage is goofy however. There is 8gb of storage, but only 500mb for apps on the data partition. The rest is nan storage which I think works similar to an SD card. You can transfer your installed apps to it, but by default they install to thelower storage first.
I am not sure if I'd recommend it yet, but it is a cool thing for a Skype device. It seems to be a beta product yet though.
Sent from my HTC Mecha using Tapatalk 2
Magic-Pro iGoGo TV how to update
how to update Magic-Pro iGoGo TV can someone plz help me
zubair151 said:
how to update Magic-Pro iGoGo TV can someone plz help me
Click to expand...
Click to collapse
You have to use the service center app or from the website and download the firmware image.
Read the manual for instructions.
Sent from my HTC Mecha using Tapatalk 2
Please help with rooting this device.
I tried z4root and gingerbreak 1.2 but failed
gingerbreak reboot it without instaling superuser or rooting
My problem is arabic letter, cannot get them connected epeialy for search on youtube.
Is there any app dose that without rooting?/??
new firmware complete... kernel, system, misc, parameter, boot...
Hello,
I have new firmware of igogo TV. He is rootable with gingerbreak but i test several method for installing cwm or twrp but nothing. I have a cwm OK but there are no phisic touch on igogotv for use it.
The archive contains driver, tool for flashing, DOC and burn files (boot, kernel,parameter, misc, recovery, loader ans system).
The launcher is optimised for tv and he is smoother than the old.
Tell me if y ou want.
____Sorry for my english.____
sosordinet said:
Hello,
I have new firmware of igogo TV. He is rootable with gingerbreak but i test several method for installing cwm or twrp but nothing. I have a cwm OK but there are no phisic touch on igogotv for use it.
The archive contains driver, tool for flashing, DOC and burn files (boot, kernel,parameter, misc, recovery, loader ans system).
The launcher is optimised for tv and he is smoother than the old.
Tell me if y ou want.
____Sorry for my english.____
Click to expand...
Click to collapse
hello sosordinet, thanks for sharing the firmware, but didnt figure out the way to connect it to the computer. Would be great if you share how connected it using which cable and where we can get it. Also, is the firmware you have is downloaded from service centre app or from somewhere else ? Do you think Igogotv MP188 model works with the firmware you have ? Thanks
vbrsekhar said:
hello sosordinet, thanks for sharing the firmware, but didnt figure out the way to connect it to the computer. Would be great if you share how connected it using which cable and where we can get it. Also, is the firmware you have is downloaded from service centre app or from somewhere else ? Do you think Igogotv MP188 model works with the firmware you have ? Thanks
Click to expand...
Click to collapse
Hello,
This is the link of firmware on dropbox:
I have not enough post for paste a link. Tell me how i do this
I receive it directly from support of magic-pro he is not on service center at this day yet...
All the information and soft "how to flash" are in the archive.
For flashing and connect the igogo tv i have used otg usb port.
For the cable, i use 2 old usb cable, cut and solder the wire green/green, blue/blue.... works fine on mp188 with cam model.
....I hope anyone modify the kernel for overclocking.....
I rooted with gingerbreak apk and install busybox from google play. All works fine.
Enjoy with new igogo tv
link ?
Hello,
i'am interested for an update. Can you send me the link to my PM?
Thanks for your help.
dr0212
sosordinet said:
Hello,
This is the link of firmware on dropbox:
I have not enough post for paste a link. Tell me how i do this
I receive it directly from support of magic-pro he is not on service center at this day yet...
All the information and soft "how to flash" are in the archive.
For flashing and connect the igogo tv i have used otg usb port.
For the cable, i use 2 old usb cable, cut and solder the wire green/green, blue/blue.... works fine on mp188 with cam model.
....I hope anyone modify the kernel for overclocking.....
I rooted with gingerbreak apk and install busybox from google play. All works fine.
Enjoy with new igogo tv
Click to expand...
Click to collapse
MP sent
please send me the link also
Can you send the link to me ?? thanks.
kindly send me the link to [email protected] Thanks a lot.
iGoGoTV MP-188 firmware
sosordinet said:
Hello,
This is the link of firmware on dropbox:
I have not enough post for paste a link. Tell me how i do this
I receive it directly from support of magic-pro he is not on service center at this day yet...
All the information and soft "how to flash" are in the archive.
For flashing and connect the igogo tv i have used otg usb port.
For the cable, i use 2 old usb cable, cut and solder the wire green/green, blue/blue.... works fine on mp188 with cam model.
....I hope anyone modify the kernel for overclocking.....
I rooted with gingerbreak apk and install busybox from google play. All works fine.
Enjoy with new igogo tv
Click to expand...
Click to collapse
Kindly send me the link of iGoGoTV MP-188 firmware to [email protected] Thanks for your help!
Hello guys,
unfortunately my IGoGo MP188 stopped working due to my unfortunate firmware upgrade. I did something wrong and now it freezes when loading. Can anyone help me with restoring?
And please send me the firmware and step by step instructions to [email protected]. I appreciate it. And is it possible to upload firmware to device through micro SD card?
Sony's PlayStation Mobile for Android just went live for certified devices last night. But what if you don't have a certified device, which so far includes only a number of Sony phones and tablets as well as the HTC One series? Heck, I have a One series device - the EVO LTE - but turns out it's not certified. That's just silly.
Not a problem - if you have root on your phone or tablet, getting the PSM (PlayStation Mobile) apk to work is a matter of pushing a few files it relies on to your /system directory and rebooting. Original credit goes to XxXPachaXxX - I used his work from a few months ago, took out some extra unnecessary Bravia engine stuff, and repacked it into a flashable zip for use with the PSM.
Here is PS Mobile running on my Nexus 7:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On the Nexus 7, I was able to play the free game and successfully tested a paid game called Fuel Tiracas. They both worked wonderfully. I also bought Samurai Beatdown, but for some reason it didn't install right (I tried 3 times but the download just said installation unsuccessful, hmmm).
Unfortunately, PSM crashes upon loading the store front on my EVO LTE. If you're not using a certified device, don't be surprised if it crashes on yours too - after all, it wasn't certified and, therefore, not tested.
HERE IS VIDEO FOR INSTALLING THE PSM
video BY Devicecustomizer
Step 1.
Download and install the latest PSM apk from Sony. I mirrored the current version, 1.0, here:
http://www.mediafire.com/?7wvag1n78y2a393
http://beta.androidfilehost.com/?fid=9390113915771290046
http://d-h.st/cyF
http://www.mirrorcreator.com/files/MAMYVY06/
If you try to run the PSM app now, you'll likely get this:
Step 2.
Download the flashable zip I packed from one of these mirrors:
http://beta.androidfilehost.com/?fid=9390113915771290047
http://www.mediafire.com/?sd2upzy00m1x5e6
http://d-h.st/hr8
http://www.mirrorcreator.com/files/1GZFXIM8/
Step 3.
Note: Just to be clear once again, you have to be rooted to install the helper files com.playstation.playstationcertified.jar and com.playstation.playstationcertified.xml. If you're not rooted yet, first figure out how to do so to your device and then come back.
Flash the zip from custom recovery, like ClockworkMod or TWRP. This relies on having busybox, which if you're rooted, you likely already do.
Alternatively, if you don't want to flash from recovery or just like to know what you're doing, you can perform the steps manually while booted into Android:
Unzip the zip file downloaded in step 2.
Copy playcertetcpermissionscom.playstation.playstationcertified.xml to /system/etc/permissions/ on your device.
Copy playcertframeworkcom.playstation.playstationcertified.jar to /system/framework/ on your device.
Set the permissions on com.playstation.playstationcertified.jar to 644 (read/write, read, read) using your favorite file manager or command line.
Reboot.
At this point, PSM should work just fine and you should no longer see the error from Step 1. Go register for a Sony Entertainment Network account if you haven't yet and try playing some games.
https://account.sonyentertainmentnetwork.com/
Please report your successes and failures in the comments.
WORKING AND TESTED GALAXY S2 and S3 photon 4g
SOURCE
ANDROIDPOLICE
I'm on the Galaxy Nexus on JB and I'm getting "Unfortunately, PSM has stopped" after it finishes logging in and loads the main page.
here are screen shots for galaxy s2
this actually works on a hd2 runnng the rom in my sig
i can post some screenies if ya want
its work on both custom and stock rom
i have dual boot my sgs2 with Pranoid android jelly bean rom and stock sgs2 ics rom
and its work on both roms
here is 2 screenies of the klondike game from the arcade
work on my Xperia X8....:good::good:
everything goes smooth until i hit the homepage , it stays there for 5 seconds then crashes . am usin international SG3
re
works perfect on HD2 with my custom rom.
i think no problem with other custom rom´s
many thanks for this work
Pixelfreak
Working for me on my Scroll Extreme running CM9.
Thanks!
I have installed it and followd all the steps.
But it isnt working on my rooted note with 4.0.4.
When i log in the program says "its not availeble in your region/country" (Netherlands)
thats a shame
Working great on the Motorola Photon with a stock rooted rom.
Are there any good game available?
I followed the steps perfectly and loads up fine, but hits homescreen then force closes.
Anyone else having this problem?
Anyone got a fix.
Using Samsung Galaxy S3
Sent from my GT-I9300 using xda premium
ermacwins said:
Are there any good game available?
Click to expand...
Click to collapse
I was hoping for PSP/PS1 games, but nope. (Mainly the ones I already own, hoping I can just dl them.)
Mostly indy/casual games.
Works great on my Xperia Ray, too bad that there is only paid games
#/bin/bash
#. /beginsignature.sh
# su
# ./checkdevice.sh
Device: ST18i
# ./checkapp.sh
App: Tapatalk 2
# ./endsignature.sh
###############
For all those who doubt this...the works great good, a few bugs...but then all are ****ing paid apps...with one really really sad app is free...
Sent from my One V using xda app-developers app
Works great!!!!!
Im on Motorola Razr XT910, with stock rom ICS 4.0.4 LATAM
Thanks for this App
Android Powered Post
Just wondering, what are the advantages over the old PS Store currently on my Xperia Play?
kazlow said:
everything goes smooth until i hit the homepage , it stays there for 5 seconds then crashes . am usin international SG3
Click to expand...
Click to collapse
Same here, hoping that someone will find a fix for us International GS3 users.
SideSync is a new PC-Mobile solution that enables the screens, windows and data to be shared easily between PC and Galaxy smartphone,
or between Galaxy Tab and Galaxy smartphone.
It works for me (I'm on windows 8.1 Update 1 on my PC and on Android 4.4.2 on my Galaxy S4 GT-I9505)
Download the PC app here (Direct Link):
http://downloadcenter.samsung.com/c...ideSync_3.0.1.459_5_callForwarding_signed.exe
Phone APK (Mega Link):
https://mega.co.nz/#!TNlhWR7B!mG-KH6y0u8hOHk5SbjdWX-PSruRv_jZqx6ERSF2scnA
More info on Samsung SideSync:
http://www.samsung.com/uk/support/convergence/sidesync/
Thanks for sharing this, I installed it but once I get connected to device via Wifi my Phone reboot also the app on my windows 8.1 disappear from the screen, i can see the icon on task bar but clicking it don't show its window :S . Tried USB mode same story phone get rebooted
Working just nice on windows 7 64 bits and galaxy s4 i9500 with omega rom v20
first open de pc app then open the phone app. Then seleect galaxy s4 on the pc app
done
Thats what I do my phone after connecting get rebooted I am on Echoe Rom v20
I am on windows 8.1 and Phoenix ROM v8 on my i9505 but i just get this Error on the PC and after that the phone gets out of the black screen and gives settings error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cheers! Worked fine over wi-fi on win 8.1 x64 and stock 4.2.2 on the i9500
my mobile rebooted after the connection ,,, its on " Samy Deluxe S4 ROM Galaxy S5 " what i can do ???
BTW my mobile is i9505
On stock i9505 works well on both wifi and usb (less lag on usb though). After 30 min of usage phone gets very hot, but it is normal i guess because of the high data transfer and the fact that it keeps the phone awake.
Sent from my GT-I9505 using XDA Premium 4 mobile app
And what pisses me off?? When someone in How to/manual/tutorial etc writes "set permissions". HOW THE HELL SHOULD I KNOW HOW?! There are many combinations like RWXRWX--- ---RW---X etc. Can someone give correct permissions?
Any one try this on a note 2?
Sent from my rooted, xposed, and locked Verizon note 2.
chuckbeez said:
Any one try this on a note 2?
Sent from my rooted, xposed, and locked Verizon note 2.
Click to expand...
Click to collapse
absolutely not working on galaxy note 2 specially after kitkat update even samsung app store dosnt showing it at all available for download so i tried this version but it wont connect and freezes the note 2 after it crashes
i want to use it for my i9300 4.3 JB wanamlite rom
Sadly doesn't seem to be working with non TW based Roms.
Slimkat 4.4.2 here, com.sec.android.sidesync.source-1.apk doesn't get installed in any way and without the source app com.sec.android.sidesync30-1.apk is crashing when im trying to run it.
Latest Version
Side Sync 3.0.4.7 :- Download
I suggest to use root explorer to copy files in zip to /Data/App - do not install them, then set permissions to 644(rw-r--r--), reboot. Run 1st on pc, then on phone.
Odoslané z GT-I9505 pomocou Tapatalku
Edit: CarHD 26.2/ktoons' kernel latest
not working @ Google Edition rom 4.4.3
just s small comment, there is already a freeware solution for this- MyMobiler (www.mymobiler.com). You have to be rooted, USB debugging enabled, for connection over WiFi, ADB wifi must be enabled.
Odoslané z GT-I9505 pomocou Tapatalku
phsnake said:
just s small comment, there is already a freeware solution for this- MyMobiler (www.mymobiler.com). You have to be rooted, USB debugging enabled, for connection over WiFi, ADB wifi must be enabled.
Odoslané z GT-I9505 pomocou Tapatalku
Click to expand...
Click to collapse
could you show me the way to enable ADB. I can connect my phone and PC via wifi, but cannot do the same via USB. I enabled USB debug. thanks!
usually when you connect pc to phone and there is any app trying to use adb, a SuperSU pop-up appears, asking whether you want to allow grant it root access.
Odoslané z GT-I9505 pomocou Tapatalku
Working perfectly on Imperium Rom v5.0 and Win 8.1 x64
Hey guys,
here's the link to the first firmware update for the SM-R732:
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
MD5: C4A14900315D87CE9CBC86B12ECCEB3E
Size: 5,500,427 bytes
Stock firmware version: R732XXU2AOIL
This version: R732XXU2AOJ3
Content:
delta.boot
delta.csc
delta.module
delta.ramdisk2
delta.recovery
delta.rootfs
delta.ua
sboot.bin
update.cfg
Not sure how to access firmware. My S2 can't connect to Nexus 5 since Marshmallow update on Monday. Although, is this only for Samsung Galaxy phones, or all?
Changelog?
Sent from my SM-G925P using Tapatalk
SKFU said:
Hey guys,
here's the link to the first firmware update for the SM-R732:
fota-s3-dn.opserver.*et/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin?px-hash=&px-wid=WP20151014-CC-62666281&px-wctime=2015-10-14%2013:44:40.0&px-unum=%20HTTP/1.1\r\n
Make sure to replace the timestamps etc to get a valid download.
MD5: C4A14900315D87CE9CBC86B12ECCEB3E
Size: 5,500,427 bytes
Stock firmware version: R732XXU2AOIL
This version: R732XXU2AOJ3
Content:
delta.boot
delta.csc
delta.module
delta.ramdisk2
delta.recovery
delta.rootfs
delta.ua
sboot.bin
update.cfg
Click to expand...
Click to collapse
This is not a working URL...
I've tried changing the time stamps but nothing seems to work. Can someone upload to another host? or shed light on what to do with the time stamps?
I don't see any info regarding an update anywhere on the web. You would think someone would write about it.
Hey,
I'll try to reverse the update process over the next days, it seems it requires more than just valid timestamp to receive the valid download.
This update is an OTA update and does not contain the full system image. Mounting the rootfs fails, I think it's more likely an incremental patch file or similar.
Nevertheless, you can easily sniff it yourself. Just make sure you use an on-device sniffer because Samsung uses a technique to bypass proxies.
Once set-up, start the Gear Manager on your phone and search for an update for your watch.
Furthermore I requested the open-source parts of the Gear S2 at Samsung. They made available the files for the last firmware here:
opensource.samsung.com - search for SM-R720
Best regards,
- S
Ok guys, the link is now working, it was just a typo, my fail
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
Anyway, still going to check how it finds the firmware files...
Once we have the downloaded file, how do we push it to the watch?
SKFU said:
Ok guys, the link is now working, it was just a typo, my fail
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
Anyway, still going to check how it finds the firmware files...
Click to expand...
Click to collapse
It's more likely for research. Normally you simply update via the Gear Manager. Nevertheless it should be possible to upload the file via Odin as well.
There is a new version of it called NetOdin especially for non USB devices like this.
ripv2 said:
Once we have the downloaded file, how do we push it to the watch?
Click to expand...
Click to collapse
SKFU said:
It's more likely for research. Normally you simply update via the Gear Manager. Nevertheless it should be possible to upload the file via Odin as well.
There is a new version of it called NetOdin especially for non USB devices like this.
Click to expand...
Click to collapse
Have you a link to NetOdin? I can't see it anywhere
Here you go: bbs.52samsung.com/thread-737324-1-1.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ash99 said:
Have you a link to NetOdin? I can't see it anywhere
Click to expand...
Click to collapse
is this firmware update worth side loading? I don't think people on "Non Supported" devices will be able to get the update normally, so this might be the only option.
SKFU said:
Here you go: bbs.52samsung.com/thread-737324-1-1.html
Click to expand...
Click to collapse
I agree, I did not notice any major changes after the update.
As said, this is for research purpose in my view. The update *should* only be applied via the official Samsung Gear app. This update file is for the Classic Bluetooth EU version btw.
Anyway, since the files seem to be patches and not a full OS, we might not go too far with this. Mounting does not work for me, so rooting can not be applied to it, yet
If someone finds the full firmware somehow (maybe call Samsung and pretend a brick?), let us know
ripv2 said:
is this firmware update worth side loading? I don't think people on "Non Supported" devices will be able to get the update normally, so this might be the only option.
Click to expand...
Click to collapse
Interesting, someone succsessfully testet this update? I am quite interessted in this Version because of my US Version of my S2 classic. Can I overwrite es US setting for the metric system and my anguage s-voice?
I can't really deal with that fahrenheit degree.
Does this update fix the notification issues? The issues I see is when the watch doesn't show the always on screen it will not vibrate when notifications come in.
I just got the update on my s2 sport and have not really noticed any differences. It said performance so maybe the battery life will be a little better than what it already is! I'll keep playing with it to see if there are any changes I'm missing.
Got the update last night and so far, no real changes. There is susposed to be an update in November to enable Samsung Pay. Can't see that this update has that.
I can confirm that I have repeatedly been able reconnect my S2 to my Nexus 5 on Marshmallow after I installed the S2 firmware update that was available in the USA in the Gear app under the About Gear settings. I went from firmware version R720XXU2AOIL to R720XXU2AOJ3. I found that even after installing the firmware, I had to do one Light Reset on the S2 before the S2 would reconnect.
So far so good. Have intentionally gone out of range 6 times and reconnected all 6 times. Will report back if situation changes.
There is a firmware update available for the watch from the gear manager. My update was 5.30MB in size and says it has bug fixes.
As some of you may know s10e new stockfirmware has rolled out..or at least for some exynos versions, SM-G970F in my case.
Just so you are aware: the Maj doesn't seem to be on OTA yet and so i used the well known Samfirm software to get it.
Then I flashed it with ODIN and I was done. (Coming from custom).
The only official android 11 yet is from Switzerland (Global Version)
From SamFirm
--This firmware has version number PDA G970FXXU9ETLJ and CSC G970FOXM9ETLJ. The operating system of this firmware is Android 11 , with build date Tue, 29 Dec 2020 08:41:15 +0000. Security patch date is 2021-01-01, with changelist 20607146. --
**
Checking firmware for SM-G970F/AUT/G970FXXU9ETLJ/G970FOXM9ETLJ/G970FXXU9ETLJ/G970FXXU9ETLJ
Model: SM-G970F
Version: G970FXXU9ETLJ/G970FOXM9ETLJ/G970FXXU9ETLJ/G970FXXU9ETLJ
OS: R(Android 11)
Filename: SM-G970F_2_20201230114135_ilfd46n4o2_fac.zip.enc4
Size: 5647249696 bytes
LogicValue: k9y50ly58f630gsl
**
So you know just 2 things: 1: Battery has drastically improved 2: The rom has been cleaned of many bloatwares by samsung itself
The benchmark results are really impressive:
- 3Dmark tells me that i outperform 100% of any tested s10e devices and that any existing android 11 models (that are probably on customs) have a score 100 pts lower than me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To conclude I ll just say that finally we have an official rom that makes this phone great. Excellent performance and finally really good battery life! And almost...free of bloatwares
Thanks for the info!
Is there a way to make the phone think it's in Switzerland in order to receive the update right now as well?
No, even travelling to Switzerland wouldn't help ;-)
You can download the firmware by using Frija oder Samfirm Reborn (set CSC to 'AUT') and afterwards flash it with ODIN.
Thanks, I can confirm the high score on this benchmark with stock android 11!
I flashed this rom via odin. Everything is fine, but I noticed that I couldn't enter recovery mode. I tried volume up + bixby + power button, then I tried volume dwn + bixby + power button. Nothing seemed to work. Before upgrade on android 10 I could enter recovery mode via first combination.
At least I was able to enter recovery via ADB.
i ve read it somewhere, but you need to have an USB cable connected to enter recovery now, give it a try.
Thanks for the first impression. Can you please say something about the handling of the Bixby Button, can you still put any other app on it? Also, does the dual screen feature work like before? I assume that cloned apps via the secure folder are still working, too?
Android 11 DBT and ROM CSC are available via SmartSwitch right Now, just checked and downloaded on Frija.
zbzdoncorleone said:
Thanks for the first impression. Can you please say something about the handling of the Bixby Button, can you still put any other app on it? Also, does the dual screen feature work like before? I assume that cloned apps via the secure folder are still working, too?
Click to expand...
Click to collapse
Yes you can still assign any app to the bixby button and split screen is also working as in OneUI 2.5. I do not use secur folders so I cannot answer your 3rd question.
Hello, I'm from Brazil and I want to install one ui 3.0 how do I do it? i have a galaxy s10e SM-G970F ZTO
@hugoneto10
Have a look at post #3
Just got the update here in in Israel
Does anyone know how I can play the ester egg cats game?
On a non Samsung device you access it from the New customizable power menu.
[QUOTE = "nunein, postagem: 84286263, membro: 430177"]
[USER = 5137606] @ hugoneto10 [/ USER]
Dê uma olhada na postagem # 3
[/ CITAR]
I'm using odin but fail
Best thing: the share menu works again. it was broken in One UI 2.
The new integrated password fill in keyboard is nice too.
Anything else is not that impressive to me. I don't like the new animation effect when pulling the notifications down.
Can i downgrade from Android 11? It seems to be less possibility than 9
ODIN can us for downgrade from 11, or it is bricked the phone?
Can someone confirm if the Gear VR still works with the S10e on One UI 3.0? Thanks in advance.
Using two bluetooth speakers at once was broken in one ui 2.0.
Do we know if it's back in 3.0?
I have the g9700 here despite I'm in Spain.
Hopefully we're getting the update soon.
Love this phone as if it was the first day owning it lmao.
A11 Update is available since yesterday...