Having successfully installed Beanstalk, I had to change the radio. I tried installing radio-att-I727-UCMC1-no-csc-no-ril-cwm.zip with TWRP 2500 but it failed to flash. Error log shows the following: =================================
| |
| ATT-SAMSUNG UCMC1 Radio |
| by mohan_kr |
=================================
Installing amss.bin
Installing mdm.bin
minzip: zlib inflate call failed (zerr=-3)
minzip: Can't extract entry to file.
script aborted: assert failed: package_extract_file("mdm.bin", "/tmp/mdm.bin")
assert failed: package_extract_file("mdm.bin", "/tmp/mdm.bin")
E:Error executing updater binary in zip '/sdcard/I727UCMC1.zip'
Error flashing zip '/sdcard/I727UCMC1.zip'
Any suggestions to flash this radio.
btw my present radio is I727RUXLF3, and this does not work with Beanstalk.
Thanks
Did you check the md5sum do you know you got a good download?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Did you check the md5sum do you know you got a good download?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Yes I checked the md5sum and it is good.
Should I be using cwm recovery to flash this radio?
WARRENFRALEIGH said:
Yes I checked the md5sum and it is good.
Should I be using cwm recovery to flash this radio?
Click to expand...
Click to collapse
Shouldn't matter. I've flashed it with twrp. It's one of the files I keep on my phone.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Shouldn't matter. I've flashed it with twrp. It's one of the files I keep on my phone.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Thanks for a quick reply, but I don't know what to try next! I guess I'll keep searching the websites.
jd1639 said:
Shouldn't matter. I've flashed it with twrp. It's one of the files I keep on my phone.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Idk, I've flashed the same file and with bean stalk and don't have problems. Did you try it more than once? I'm sure you did. Try doing a clean install of bean stalk. Flash the rom and then the radio.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
WARRENFRALEIGH said:
Having successfully installed Beanstalk, I had to change the radio. I tried installing radio-att-I727-UCMC1-no-csc-no-ril-cwm.zip with TWRP 2500 but it failed to flash. Error log shows the following: =================================
| |
| ATT-SAMSUNG UCMC1 Radio |
| by mohan_kr |
=================================
Installing amss.bin
Installing mdm.bin
minzip: zlib inflate call failed (zerr=-3)
minzip: Can't extract entry to file.
script aborted: assert failed: package_extract_file("mdm.bin", "/tmp/mdm.bin")
assert failed: package_extract_file("mdm.bin", "/tmp/mdm.bin")
E:Error executing updater binary in zip '/sdcard/I727UCMC1.zip'
Error flashing zip '/sdcard/I727UCMC1.zip'
Any suggestions to flash this radio.
btw my present radio is I727RUXLF3, and this does not work with Beanstalk.
Thanks
Click to expand...
Click to collapse
are you rogers or ATT? download it again and reflash.
gixxer93001 said:
are you rogers or ATT? download it again and reflash.
Click to expand...
Click to collapse
I am Rogers. Also I restored back to LiquidSmooth 4.1.2 so I could use the phone and have been attempting to flash UCMC1 radio while still using the liquidsmooth ROM. Could that be the problem?, although I believe it should work with this radio, too.
WARRENFRALEIGH said:
I am Rogers. Also I restored back to LiquidSmooth 4.1.2 so I could use the phone and have been attempting to flash UCMC1 radio while still using the liquidsmooth ROM. Could that be the problem?, although I believe it should work with this radio, too.
Click to expand...
Click to collapse
There's no problem with the ROM. UCMC1 radio is for U.S baseband. Try to flash this radio for Rogers. http://forum.xda-developers.com/showthread.php?t=2155984
or you check this thread http://forum.xda-developers.com/showthread.php?t=1785999
gixxer93001 said:
There's no problem with the ROM. UCMC1 radio is for U.S baseband. Try to flash this radio for Rogers. http://forum.xda-developers.com/showthread.php?t=2155984
or you check this thread http://forum.xda-developers.com/showthread.php?t=1785999
Click to expand...
Click to collapse
Thanks for the help. I've tried flashing RUXUMA7 AND UCLF6. Both failed with very similar error. I also tried flashing RUXLF3 which is the radio already in the phone, fearing that if I change radios and need to go back to this radio for LiquidSmooth 4.1.2 I would really be in trouble if this wouldn't flash. Anyway it also failed. I tried flashing from both the sd card and the internal card without success. I may just be stuck with my LiquidSmooth, which btw works great.
WARRENFRALEIGH said:
Thanks for the help. I've tried flashing RUXUMA7 AND UCLF6. Both failed with very similar error. I also tried flashing RUXLF3 which is the radio already in the phone, fearing that if I change radios and need to go back to this radio for LiquidSmooth 4.1.2 I would really be in trouble if this wouldn't flash. Anyway it also failed. I tried flashing from both the sd card and the internal card without success. I may just be stuck with my LiquidSmooth, which btw works great.
Click to expand...
Click to collapse
MAYBE SOLVED! I extracted the zip file for RUXUMA7 and re-zipped it with 7zip. It flashed perfectly. Seems there was something wrong with the original zip file downloaded with google chrome. The MD5 was fine, but Recovery wouldn't open it.
WARRENFRALEIGH said:
Thanks for the help. I've tried flashing RUXUMA7 AND UCLF6. Both failed with very similar error. I also tried flashing RUXLF3 which is the radio already in the phone, fearing that if I change radios and need to go back to this radio for LiquidSmooth 4.1.2 I would really be in trouble if this wouldn't flash. Anyway it also failed. I tried flashing from both the sd card and the internal card without success. I may just be stuck with my LiquidSmooth, which btw works great.
Click to expand...
Click to collapse
what Gapps are you using? Try to flash different Gapps if it still not working. Find another rom that is stable.
gixxer93001 said:
what Gapps are you using? Try to flash different Gapps if it still not working. Find another rom that is stable.
Click to expand...
Click to collapse
Beanstalk flashed fine after changing the updater-script. And after extracting the radio RUXUMAZ and rezipping it with zip7, it flashed fine also.
Now I am good to go.
Thanks to everyone for their advice.
WARRENFRALEIGH said:
Beanstalk flashed fine after changing the updater-script. And after extracting the radio RUXUMAZ and rezipping it with zip7, it flashed fine also.
Now I am good to go.
Thanks to everyone for their advice.
Click to expand...
Click to collapse
Glad to hear you're up and running.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Related
Ok folks, here's the NANDROID backup I made of the stock Rogers ICS firmware:
http://d-h.st/4mq
It is from a fresh boot and non-rooted.
http://forum.xda-developers.com/showthread.php?t=1722505 <- Matching modem files for anyone using this.
Nicely done!
awesome, can't wait to get home! The connection speed at work is terrible.
I'm going to set this up and see if I like it better than CM9, I really doubt it but I've got to try!
Well done sir
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
so basically I'll just nandroid my CM9 ROM, reboot to recovery, flash Rogers ICS, flash superuser.zip and reboot, correct?
the firmware is also available on sammobile.com
---------- Post added at 01:53 PM ---------- Previous post was at 01:51 PM ----------
copene said:
awesome, can't wait to get home! The connection speed at work is terrible.
I'm going to set this up and see if I like it better than CM9, I really doubt it but I've got to try!
Click to expand...
Click to collapse
i think u wont like it and u will probably go back to cm9
Just out of curiosity, does this flash the modem as well? I seem to be "stuck" with ULCE2, even after using ODIN to go back to stock Rogers ROM.
nekkidtruth said:
Just out of curiosity, does this flash the modem as well? I seem to be "stuck" with ULCE2, even after using ODIN to go back to stock Rogers ROM.
Click to expand...
Click to collapse
Nope. No modem. Just flash another if you don't like LE2. And the experience won't change. You'll never prefer stock over CM9. I already know what to expect. This is great for developing but i see no point in downloading just to try it out. You'll be disappointed.
Sent from my SAMSUNG-SGH-I727 using xda premium
I've linked the modem files to Seanzscreams. I don't know how to create a CWM flashable zip for them or I would do so for you. I'm sure Sean will come up with it for us.
Ends said:
Nope. No modem
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
SOB. Lol
I was under the impression that the ODIN tar's contained the modem which would be flashed as well. Anyone know where I can get my hands on the the stock Rogers modem? I'd like to flash it so I can either update through Kies, or flash the new stock ROM.
TLS2000 said:
I've linked the modem files to Seanzscreams. I don't know how to create a CWM flashable zip for them or I would do so for you. I'm sure Sean will come up with it for us.
Click to expand...
Click to collapse
Awesome thanks
nekkidtruth said:
SOB. Lol
I was under the impression that the ODIN tar's contained the modem which would be flashed as well. Anyone know where I can get my hands on the the stock Rogers modem? I'd like to flash it so I can either update through Kies, or flash the new stock ROM.
Awesome thanks
Click to expand...
Click to collapse
They do. However this is a NANDROID, which doesn't. Its files straight from his backup.
Edit: and the radio will be available in the development section shortly for download
Sent from my SAMSUNG-SGH-I727 using xda premium
nekkidtruth said:
SOB. Lol
I was under the impression that the ODIN tar's contained the modem which would be flashed as well. Anyone know where I can get my hands on the the stock Rogers modem? I'd like to flash it so I can either update through Kies, or flash the new stock ROM.
Awesome thanks
Click to expand...
Click to collapse
The ODIN tar does have the modem, I just can't give you a CWM flashable zip file at this time.
You can flash the ODIN tar though.
Anybody tried to flash on the skyrocket?
So, im currently running CM9 and I have done teh following trying to flash the rom in the OP
-made Nand backup
-wipe (data, cache, dalvik)
-format system
-selected the new rom to flash, and I get the following message
Installing: /emmc/ICS_ROGERS_I727RUXLF3_CWM_FLASHABLE.zip
Finding Update Package
Opening Update Package
Installing Update
Installation Aborted
Click to expand...
Click to collapse
My best guess is that it will only update/install FROM stock, am I right in this assumption?
Ends said:
They do. However this is a NANDROID, which doesn't. Its a zip flashable through cwm
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I just flashed the stock Rogers in ODIN. It does not have the modem. My phone is still showing UCLE2 in the system information. Unless I'm doing something incorrectly...
For the record, I'm referring to the old Rogers stock tar. I'll try the one for this new update and see what happens.
ceasee said:
So, im currently running CM9 and I have done teh following trying to flash the rom in the OP
-made Nand backup
-wipe (data, cache, dalvik)
-format system
-selected the new rom to flash, and I get the following message
My best guess is that it will only update/install FROM stock, am I right in this assumption?
Click to expand...
Click to collapse
No. It shouldn't matter
Sent from my SAMSUNG-SGH-I727 using xda premium
nekkidtruth said:
I just flashed the stock Rogers in ODIN. It does not have the modem. My phone is still showing UCLE2 in the system information. Unless I'm doing something incorrectly...
For the record, I'm referring to the old Rogers stock tar. I'll try the one for this new update and see what happens.
Click to expand...
Click to collapse
I guess i should have said "some of them do". Not all. But a nandroid will never provide modem
Sent from my SAMSUNG-SGH-I727 using xda premium
You need to wipe all of the folders in CWM including /system and clear all caches in CWM before flashing the ODIN file if you want the modem to take. It's weird like that.
TLS2000 said:
You need to wipe all of the folders in CWM including /system and clear all caches in CWM before flashing the ODIN file if you want the modem to take. It's weird like that.
Click to expand...
Click to collapse
Thanks for the info. I just flashed the tar for the new Rogers stock and it looks like it wrote the modem
I asked this in dev section with no answers.. Is this release form Rogers based on a new kernal or the same old one as Sky ICS was based on?
Hello,
Iam currently on 2.3.6GB.
I hav used Rebel rom, Lithiumv.1, 2, 1.2.1, 1.3.1 and romulus roms.and tried to do an OTA update to ICS and was unsuccessful.
ICS OTA Failed:
I tried OTA by uninstalling Atrixbootstrapper, Removing hijack& logwrapper files. Renamed logwrapper.bin to logwrapper and tried to do an OTA Update and failed every time.
error on last_log in Caches is
"failed to stat "/system/app/AABSync.apk": No such file or directory
file "/system/app/AABSync.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/AABSync.apk", "c13eaab188fec9ad984ef249bc2e0bb33eeffd4e", "9909d86764163f3f9095a8d0c0885fab6f91e0cc")
assert failed: apply_patch_check("/system/app/AABSync.apk", "c13eaab188fec9ad984ef249bc2e0bb33eeffd4e", "9909d86764163f3f9095a8d0c0885fab6f91e0cc")
E:Error in /cache/Blur_Version.55.13.25.MB865.ATT.en.US.zip
(Status 7)
Installation aborted"
Stock ROM Fxz flashing failed:
then i decided to install Stock rom.2.3.5 InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
Followed the instructions and
Replaced xml file, cdt.bin, device_tree.bin/ lbl/ , boot.img and yet failed.
xml file i used is this
http://www.mediafire.com/?1rfxr63wtcvvsve
got stuck on ap fastboot screen at 3/19the step a lot of times and recovered booting boot.img by following steps from
http://forum.xda-developers.com/showthread.php?t=1493386.
message on RSD lite.:
3/19 step: flash failed "mbmloader.bin"
how do i install stock rom?
Please Help guys...
thank you...
shkrs said:
Hello,
Iam currently on 2.3.6GB.
I hav used Rebel rom, Lithiumv.1, 2, 1.2.1, 1.3.1 and romulus roms.and tried to do an OTA update to ICS and was unsuccessful.
I tried OTA by uninstalling Atrixbootstrapper, Removing hijack& logwrapper files. Renamed logwrapper.bin to logwrapper and tried to do an OTA Update and failed every time.
Tried to install Stock rom.2.3.5 InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
Followed the instructions and
Replaced xml file, cdt.bin, device_tree.bin/ lbl/ , boot.img and yet failed.
xml file i used is this
http://www.mediafire.com/?1rfxr63wtcvvsve
got stuck on ap fastboot screen at 3/19the step a lot of times and recovered booting boot.img by following steps from
http://forum.xda-developers.com/showthread.php?t=1493386.
message on RSD lite.:
3/19 step: flash failed "mbmloader.bin"
how do i install stock rom?
Please Help guys...
thank you...
Click to expand...
Click to collapse
What boot.img did you replace in the first place for the 2.3.5 fxz?? And, why? What instructions did you follow? Also, probably the reason why it failed the first time is because your md5 sums in that .xml you linked do not match the ones from the original "replace.zip" found here - which contains all the necessary files from 2.3.6 and the proper .xml - look under this heading:
How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!
Click to expand...
Click to collapse
And, if you weren't using those replace files in the first place, then that is a big issue..
Another question, why not just use the 2.3.6 fxz in the first place? It's been available for a while now..
Not sure about your next steps.. could depend on what boot.img you flashed.. maybe try the full 2.3.6 fxz package (?) - see here
affter the boot.img of stock rom dint work... and after the replace files dint work.. i have replaced boot.img from
http://www.mediafire.com/?y4335f29j6qbq8y
though...thanks for the 2.3.6 stock link....
welll.... i will update you once im finished with downloading 2.3.6 and flashing it....
Used 2.3.6 fxz but failed to flash. Flash process failed at 3/19step.
"mbmloader.bin"
You must need to patch the fxz and you'll be fine.
Sent from my SAMSUNG-SGH-I727 using xda premium
How to patch fxz?
Sent from my MB865 using xda app-developers app
shkrs said:
How to patch fxz?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
It's in this thread.
http://forum.xda-developers.com/showthread.php?p=20389449
Sent from my MB865 using xda premium
thank you all guys...
finaly im on stock rom 2.3.5 using
http://forum.xda-developers.com/showthread.php?t=1539167
Thanks a lot for the help...
shkrs said:
thank you all guys...
finaly im on stock rom 2.3.5 using
http://forum.xda-developers.com/showthread.php?t=1539167
Thanks a lot for the help...
Click to expand...
Click to collapse
AWESOME. Great news man. Glad we could help you.
Sent from my MB865 using xda premium
successfully upgraded to ICS by OTA update
shkrs said:
successfully upgraded to ICS by OTA update
Click to expand...
Click to collapse
Just be sure you read up on all the posts regarding the official ota/leak#2.
And know that there is no known fxz for the official version. But congratulations none the less Enjoy
Sent from my MB865 using xda premium
shkrs said:
successfully upgraded to ICS by OTA update
Click to expand...
Click to collapse
Congrats. And good job hitting the thanks button to show your appreciation.
(You did, I checked)
I am working with Skyrocket I727R (the rogers phone), and have installed LiquidSmooth 4.1.2 which I must say works very well. I just wanted to try another rom and update to JB 4.2.2.
I thought when I could not flash JellyBeer and Paranoid Android getting error 7 that it was due to the Assert line in the updater-script. But after removing the Assert Line, it still would not flash. I also found out I cannot flash any of the Roms. I am using TWRP 2440. which I had to install through Odin as the TWRP.zip file would not flash properly with CWM recovery. It said it completed successfully but on reboot nothng would happen, so I had to install the TWRP.tar through ODIN. Could it be my SD card, or a problem with recovery? Should I try a different version of TWRP?
Thanks for any help.
The twrp version you're using is very old. New roms won't flash on it. The latest is 2.5.x.x
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
WARRENFRALEIGH said:
I am working with Skyrocket I727R (the rogers phone), and have installed LiquidSmooth 4.1.2 which I must say works very well. I just wanted to try another rom and update to JB 4.2.2.
I thought when I could not flash JellyBeer and Paranoid Android getting error 7 that it was due to the Assert line in the updater-script. But after removing the Assert Line, it still would not flash. I also found out I cannot flash any of the Roms. I am using TWRP 2440. which I had to install through Odin as the TWRP.zip file would not flash properly with CWM recovery. It said it completed successfully but on reboot nothng would happen, so I had to install the TWRP.tar through ODIN. Could it be my SD card, or a problem with recovery? Should I try a different version of TWRP?
Thanks for any help.
Click to expand...
Click to collapse
Use the goo manager app to install twrp. Yours is old as dirt.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
xcrazydx said:
Use the goo manager app to install twrp. Yours is old as dirt.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I updated TWRP using Goo manager as suggested. I tried installing Revolt which does not have an assert line. It failed. Error with updater-binary.
Tried installing Beanstalk (newest version). Also had error with update-binary. Then I edited the updater-script removing the assert line. Eureka, it worked.
WARRENFRALEIGH said:
I updated TWRP using Goo manager as suggested. I tried installing Revolt which does not have an assert line. It failed. Error with updater-binary.
Tried installing Beanstalk (newest version). Also had error with update-binary. Then I edited the updater-script removing the assert line. Eureka, it worked.
Click to expand...
Click to collapse
Sweet!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
I am trying to use flash paranoid android and flashing this version of gapps along with it: pa_gapps-stock-4.4.2-20140412-signed. When I go to flash the ROM, it succeeds without issue, but when I go to flash gapps it says that it cant open the zip fie of gapps and than in parenthesis it says (bad). and than it says installation aborted. Please help.
maxell505 said:
I am trying to use flash paranoid android and flashing this version of gapps along with it: pa_gapps-stock-4.4.2-20140412-signed. When I go to flash the ROM, it succeeds without issue, but when I go to flash gapps it says that it cant open the zip fie of gapps and than in parenthesis it says (bad). and than it says installation aborted. Please help.
Click to expand...
Click to collapse
Maybe it was a bad download?
Sent from my Nexus 7 using xda app-developers app
Kreateablaze said:
Maybe it was a bad download?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I have downloaded it about 3 times and tried to flash it. Previously I tried to do this with OmniROM but than I just gave up and restored my system back to stock. Now I am trying it with Paranoid Android and the same thing is happening.
maxell505 said:
I have downloaded it about 3 times and tried to flash it. Previously I tried to do this with OmniROM but than I just gave up and restored my system back to stock. Now I am trying it with Paranoid Android and the same thing is happening.
Click to expand...
Click to collapse
Are you checking the md5sum of the download? Do that to make sure it's a good download
Sent from my SAMSUNG-SGH-I727
I am trying to flash Euphoria for my one and after i wipe the Dalvik Cache, System, Data, and cache and then when i try to flash the Euphoria zip, it fails instantly and says "Error Executing updater binary". How can i fix this issue? I have checked the md5 checksum and it matches the download.
Any help with this is greatly appreciated!
Flash the base.
loridoo said:
Flash the base.
Click to expand...
Click to collapse
I'm sorry, what do you mean by that?
hosfordryan said:
I am trying to flash Euphoria for my one and after i wipe the Dalvik Cache, System, Data, and cache and then when i try to flash the Euphoria zip, it fails instantly and says "Error Executing updater binary". How can i fix this issue? I have checked the md5 checksum and it matches the download.
Any help with this is greatly appreciated!
Click to expand...
Click to collapse
Try flagging the latest cm 12 nightly to get the latest firmware. Then wipe system, data, caches and install Euphoria
Sent from my A0001 using XDA Free mobile app
Incompatible recovery if you are using KK base ROM than flash latest recovery
Might solve your issue
If this aint help just let me know the issue in detail
aksclusive said:
Incompatible recovery if you are using KK base ROM than flash latest recovery
Might solve your issue
If this aint help just let me know the issue in detail
Click to expand...
Click to collapse
I tried updating TWRP to the latest version (2.8.5.1) and unfortunately I am still getting "error executing updater binary in zip" when i try to flash the euphoria rom. I am on the latest ota for the OnePlus.
In the console, above the error message, it says "assert failed: oppo.verify_trustzone("TZ.BF.2.0-2.0.0109") == "1"" if that is significant at all.
Thanks for the help
Ok, i flashed CM12 and then wiped and tried to flash Euphoria and it worked!
Thanks for the help everyone.
hosfordryan said:
Ok, i flashed CM12 and then wiped and tried to flash Euphoria and it worked!
Thanks for the help everyone.
Click to expand...
Click to collapse
Just an FYI, the tz assertion error has to do with not being on a cm12 firmware. Flashing the latest nightly automatically installs it for you. But if you want to go back to KitKat, you need to flash the cm11 firmware zip or you'll keep having an SOD
Sent from my A0001 using XDA Free mobile app
abhi08638 said:
Just an FYI, the tz assertion error has to do with not being on a cm12 firmware. Flashing the latest nightly automatically installs it for you. But if you want to go back to KitKat, you need to flash the cm11 firmware zip or you'll keep having an SOD
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Yep, just experienced that. I wen't back to Cm11 because i wasn't getting phone signal. Im on att. Do you know of a fix for this?
hosfordryan said:
Yep, just experienced that. I wen't back to Cm11 because i wasn't getting phone signal. Im on att. Do you know of a fix for this?
Click to expand...
Click to collapse
You need to flash the cm11 firmware zip or just the modem. You can find the files in the android development section
Edit: you can download the 05Q radio files from this thread
http://forum.xda-developers.com/showthread.php?t=2810365
Sent from my A0001 using XDA Free mobile app