Related
Hello,
Here is I want to share my work of latest AOSP Jelly Bean 4.3 with build number JSS15J for Nexus 7 (WIFI).
I have do this from the source on google.
This ROM can be flash via CWM (TWRP not tested). Make sure you have installing CWM first (I have 6.0.3.3 on my tablet).
Let's to the point .
Download Link : https://www.dropbox.com/sh/x2wov7n2f8m7eze/5rzHYlV4tq/grouper43-gapps.zip
Instruction :
Please backup your current ROM first before execute this.
Make sure you have upgrade Bootloader v4.23 and Radio 1231_0.18.0_0409
1. Download and put them in your internal SDCard.
2. Reboot into your recovery mode.
3. Wipe Data/Factory.
4. Wipe Cache Partition.
5. Wipe Dalvik Cache.
6. Installing from ZIP
7. Reboot and enjoy.
Features :
1. ROM already Deodexed.
2. Dual Panel Settings.
3. Combined with Latest Gapps.
4. Latest Kernel 4.3 (MR2)
5. Advanced Power Menu
Android 4.3 Version :
JWR66V is 4.3_r1
JSR78D is 4.3_r2
JSS15J is 4.3_r2.1
DO WITH YOU OWN RISK
Credits :
Google
Thank you .
Reserved .
First...downloading now.......
No root?
Sent from my Nexus 7 using xda app-developers app
_-..zKiLLA..-_ said:
No root?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yes, You must installing latest Superuser/SuperSU after that if you want to root them .
This is pure stock with zero customization and tweak am I right?
Sent from my GT-I9100 using Tapatalk 4
infatality said:
This is pure stock with zero customization and tweak am I right?
Sent from my GT-I9100 using Tapatalk 4
Click to expand...
Click to collapse
It's pure stock who have compile from the source on Google. But, I have add power menu and combining with latest Gapps.
why there is a bootloader requirement?
Sent from my Nexus 7
1Q84 said:
why there is a bootloader requirement?
Sent from my Nexus 7
Click to expand...
Click to collapse
Actually, that was optional. I said in that above because their stock ROM include with new Radio and Bootloader. Only keep they can working properly .
failed to install?
podagee said:
failed to install?
Click to expand...
Click to collapse
Can you specific about the error message ?
tried installing it through twrp and it says failed right at the end.is this for grouper?
TWRP says:
extracting system...
set_perm: some changes failed
E:Errror executing updater binary in zip '/sdcard/download/aosp43-grouper-gapps.zip
Error flashing zip '/sdcard/download/aosp4-grouper-gapps.zip
I think your source is for tilapia no radio in grouper I tried install same errors
Sent from my Nexus 7 using Tapatalk 4
_-..zKiLLA..-_ said:
TWRP says:
extracting system...
set_perm: some changes failed
E:Errror executing updater binary in zip '/sdcard/download/aosp43-grouper-gapps.zip
Error flashing zip '/sdcard/download/aosp4-grouper-gapps.zip
Click to expand...
Click to collapse
jimchee said:
I think your source is for tilapia no radio in grouper I tried install same errors
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
podagee said:
tried installing it through twrp and it says failed right at the end.is this for grouper?
Click to expand...
Click to collapse
I am sorry, Please hold on while I checking to fix and reupload them.
The file has been examining and corrected. You can download them now.
Any chance for an Odexed base?
I tried again to install and just sat on the boot screen and tried again after booting back into recovery and clearing dalvik cache same result, has anyone else successfully booted? If so tell me how you proceeded on install, I formatted data and cache then wiped boot and did clean install, it did install but just stayed on boot animation, let it run for at least 10 minutes but never booted into Rom,
Sent from my Nexus 7 using Tapatalk 4
jimchee said:
I tried again to install and just sat on the boot screen and tried again after booting back into recovery and clearing dalvik cache same result, has anyone else successfully booted? If so tell me how you proceeded on install, I formatted data and cache then wiped boot and did clean install, it did install but just stayed on boot animation, let it run for at least 10 minutes but never booted into Rom,
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
same here no success with boot, it just hangs. ill just stick to cm10.2
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
explicitKC said:
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
Click to expand...
Click to collapse
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
explicitKC said:
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
Click to expand...
Click to collapse
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
explicitKC said:
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
explicitKC said:
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
Click to expand...
Click to collapse
I am currently using TWRP, but I have used PhilzTouch in the past. They both work pretty well. TWRP has bigger buttons that are spaced out better and has an easier interface to use. PhilzTouch has some other features but isn't as polished. It is just a matter of personal preference. Some Roms will have a recommended recovery listed, though.
Also, to make sure that the zip you download isn't corrupted, check the md5 of the zip you download against the md5 on the download page.
Sent from my SGH-T989 using Tapatalk
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Edit:-
One more thing I would like to add,Phillz touch blackhawk supports dual-booting through next kernel
lokesh.3440 said:
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Click to expand...
Click to collapse
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
really,which one are you referring to ? TWRP 2.7.0.3 ?
lokesh.3440 said:
really,which one are you referring to ? TWRP 2.7.0.3 ?
Click to expand...
Click to collapse
I am currently using 2.7.0.1 but 2.7.0.3 also has it. The one that I linked to was compiled by Android-Andi
Sent from my SGH-T989 using XDA mobile app
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Just wanted to say thanks again to jrc2. I went with TWRP because backup to sd card was not working on CWM and Philz. Backup would start and in the middle of backing up data or system tab would just reboot. But TWRP looks ok and flashed with no problems.
Hi guys, i try to flash "cm-11.0-XNPH25R-bacon-signed.zip" with TWRP but there is an error in the time of flashing "Failed" ...Where i can find the correct zip for TWRP to flash CM11S into my OnePlus One?
giakomoange said:
Hi guys, i try to flash "cm-11.0-XNPH25R-bacon-signed.zip" with TWRP but there is an error in the time of flashing "Failed" ...Where i can find the correct zip for TWRP to flash CM11S into my OnePlus One?
Click to expand...
Click to collapse
Hey welcome to xda and the ONEPlus forum. Just so you know this is a place where you should do as much troubleshooting prior to posting. Now questions:
1. have you checked the md5 to make sure it matches the zip file (Google it)
2. are you sure the file you downloaded is not corrupted
3. have you tried to open up the zip file on a pc to see if there are any issues
4. have you tried to download the file again and make another attempt
5. have you tried to download other files and flash it to pinpoint issue.
Android is great but dont play around with a phone that you will have to wait for another invite if you are unsure of what you are doing. I am saying this as someone trying to help you and not flame you....
Try the above any issues let me know
after wiping all,click on mount,uncheck system & then flash & you are good to go
Sent from my One using XDA Premium 4 mobile app
playya said:
Hey welcome to xda and the ONEPlus forum. Just so you know this is a place where you should do as much troubleshooting prior to posting. Now questions:
1. have you checked the md5 to make sure it matches the zip file (Google it)
2. are you sure the file you downloaded is not corrupted
3. have you tried to open up the zip file on a pc to see if there are any issues
4. have you tried to download the file again and make another attempt
5. have you tried to download other files and flash it to pinpoint issue.
Android is great but dont play around with a phone that you will have to wait for another invite if you are unsure of what you are doing. I am saying this as someone trying to help you and not flame you....
Try the above any issues let me know
Click to expand...
Click to collapse
How do I perform step 1 and 2?
giakomoange said:
How do I perform step 1 and 2?
Click to expand...
Click to collapse
google md5 checker and then go back to where you got the file and check what the md5 number is. Got to google this stuff my friend. but why dont you just download the file again. All the info you need is out there but you got to get your hands dirty and search and learn about them. Its only going to help you in the long run :good:
RISHI RAJ said:
after wiping all,click on mount,uncheck system & then flash & you are good to go
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The system is already unchecked on my TWRP I check it and mount it before wipe?
giakomoange said:
The system is already unchecked on my TWRP I check it and mount it before wipe?
Click to expand...
Click to collapse
go to advanced wipe and simply check system, dalvik cache and cache. Nice clean wipe of system folder will always help. Remember you will have to flash gapps again as well(if necessary)
Full stock CM11S rom no need to worry about gapps
I had same issue I fixed it like this: after I pushed the cm11 zip from PC to phone using cmd, I didn't just go ahead and installed it. Instead i disconnect the phone did a reboot back into the twrp recovery, AND THEN installed the cm11 zip. That worked for me and no errors.
Sent from my One using Tapatalk
Are you trying to flash the factory image from the CM site? Of so, it won't work as it's not a flashable ZIP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
giakomoange said:
Hi guys, i try to flash "cm-11.0-XNPH25R-bacon-signed.zip" with TWRP but there is an error in the time of flashing "Failed" ...Where i can find the correct zip for TWRP to flash CM11S into my OnePlus One?
Click to expand...
Click to collapse
is there some other issue with your phone that is making you need to flash this? I ask only because you should be able to get an OTA update to that build directly from "System updates" in Settings under About...
RISHI RAJ said:
after wiping all,click on mount,uncheck system & then flash & you are good to go
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Bro
You're welcome
Sent from my One using XDA Premium 4 mobile app
Hi guys. I read alot those days about everything and now i'm trying to instal CARBON ROM to my nexus 5.
When i'm in TWRP, i get this error when i try to instal the ROM:
Installing ' /sdcard/CARBON-KK-NIGHTLY-20141002-0125-hammerhead.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file fould
Verifying zip signature...
assert failure: getprop("ro.bootloader") == "HHZ11k"
E:Error exeuting updater binary in zip ' /sdcard/CARBON-KKNIGHTLY-20141002-0125-hammerhead.zip'
Error flashing zip ' /sdcard/CARBON-KKNIGHTLY-20141002-0125-hammerhead.zip'
Updating partition details...
I updated the bootloader and still it gets the error.
The steps i use when i try to flash the rom are:
1. wipe: For TWRP- wipe system partition, data, cache and dalvik
2. get to install..
Hope you know this problem because i'm sick of it I tried to install a custom kermel, and bom, the error apears again.
Thank you!
p.s: sorry for my bad english.
Could be a bad download. Try again. Or perhaps you can ask in the Rom thread?
I get this error every time, i tried with kernel also. I cant ask there because i'm newbie.
Oh, you need 10 posts to post there. Look around and join discussions with some constructive posts, when you have 10 you can post in the Rom thread.
Or, simply try another Rom.
Probably a bad download. But in a terminal emulator on your phone what do you get when you type:
su
getprop ro.bootloader
Sent from my Nexus 5 using XDA Free mobile app
i tried another rom, still the same
in the terminal i get a response: HHZ11k
p.s: i have the stock rom now, i guess its not a problem.
PaulTodinca said:
i tried another rom, still the same
in the terminal i get a response: HHZ11k
Click to expand...
Click to collapse
what bootloader are you using? i believe youll need the HHZ11d bootloader to flash anything over 4.4.2
PaulTodinca said:
i tried another rom, still the same
in the terminal i get a response: HHZ11k
p.s: i have the stock rom now, i guess its not a problem.
Click to expand...
Click to collapse
You have the right bootloader then. It's a bad download
Sent from my Nexus 5 using XDA Free mobile app
@jd1639 all the roms i try to install are bad downloads? :-s
@simms22 are you sure? could you give me a link or something to test it ?
PaulTodinca said:
@jd1639 all the roms i try to install are bad downloads? :-s
@simms22 are you sure? could you give me a link or something to test it ?
Click to expand...
Click to collapse
I don't know, but you have the right bootloader. You shouldn't be getting the assert error.
Sent from my Nexus 5 using XDA Free mobile app
Try philz recovery. ?
Are you sure that its the right version for the nexus?
Sent from my Nexus 5 using XDA Free mobile app
yes, i'm sure.
This is my phone, i checked on, and its corect.
Version: 4.4.4
Build: KTU84P
Bootloader: HHZ11k
Baseband: 2.0.50.1.16
PaulTodinca said:
yes, i'm sure.
This is my phone, i checked on, and its corect.
Version: 4.4.4
Build: KTU84P
Bootloader: HHZ11k
Baseband: 2.0.50.1.16
Click to expand...
Click to collapse
What version of twrp are you on. If an older version update it
Sent from my Nexus 5 using XDA Free mobile app
TWRP version: v2.8.0.1
I have to ask you, after i rooted the phone i never made any changes into the TWRP Manager. I backed / restored up trough recovery mode and
I see bunch of stuff there: Install, classic backup and i am concerned to see install TWRP, but its installed :-s . Is there a problem?
PaulTodinca said:
TWRP version: v2.8.0.1
I have to ask you, after i rooted the phone i never made any changes into the TWRP Manager. I backed / restored up trough recovery mode and
I see bunch of stuff there: Install, classic backup and i am concerned to see install TWRP, but its installed :-s . Is there a problem?
Click to expand...
Click to collapse
Shouldn't be a problem. But I'd delete twrp manager. Once you have twrp installed do everything through it, not twrp manager
Sent from my Nexus 5 using XDA Free mobile app
im still using twrp version 2.6 something, so twrp 2.8.0.1 is fine. but yea, do it through the recovery, not twrp manager.
Two things....Try philz....lol. Yes twrp should work, but try philz to see what happens.
And is your device encrypted?
Finnaly!!!! i downloaded 10 times the rom and it works... and it was a thing to mark under the install button and i deselected that.
Thank you guys! Love you all! :laugh::victory:
PaulTodinca said:
Finnaly!!!! i downloaded 10 times the rom and it works... and it was a thing to mark under the install button and i deselected that.
Thank you guys! Love you all! :laugh::victory:
Click to expand...
Click to collapse
What do you mean, a thing to mark under the install button?
Sent from my Nexus 5 using XDA Free mobile app
I am trying to flash Euphoria for my one and after i wipe the Dalvik Cache, System, Data, and cache and then when i try to flash the Euphoria zip, it fails instantly and says "Error Executing updater binary". How can i fix this issue? I have checked the md5 checksum and it matches the download.
Any help with this is greatly appreciated!
Flash the base.
loridoo said:
Flash the base.
Click to expand...
Click to collapse
I'm sorry, what do you mean by that?
hosfordryan said:
I am trying to flash Euphoria for my one and after i wipe the Dalvik Cache, System, Data, and cache and then when i try to flash the Euphoria zip, it fails instantly and says "Error Executing updater binary". How can i fix this issue? I have checked the md5 checksum and it matches the download.
Any help with this is greatly appreciated!
Click to expand...
Click to collapse
Try flagging the latest cm 12 nightly to get the latest firmware. Then wipe system, data, caches and install Euphoria
Sent from my A0001 using XDA Free mobile app
Incompatible recovery if you are using KK base ROM than flash latest recovery
Might solve your issue
If this aint help just let me know the issue in detail
aksclusive said:
Incompatible recovery if you are using KK base ROM than flash latest recovery
Might solve your issue
If this aint help just let me know the issue in detail
Click to expand...
Click to collapse
I tried updating TWRP to the latest version (2.8.5.1) and unfortunately I am still getting "error executing updater binary in zip" when i try to flash the euphoria rom. I am on the latest ota for the OnePlus.
In the console, above the error message, it says "assert failed: oppo.verify_trustzone("TZ.BF.2.0-2.0.0109") == "1"" if that is significant at all.
Thanks for the help
Ok, i flashed CM12 and then wiped and tried to flash Euphoria and it worked!
Thanks for the help everyone.
hosfordryan said:
Ok, i flashed CM12 and then wiped and tried to flash Euphoria and it worked!
Thanks for the help everyone.
Click to expand...
Click to collapse
Just an FYI, the tz assertion error has to do with not being on a cm12 firmware. Flashing the latest nightly automatically installs it for you. But if you want to go back to KitKat, you need to flash the cm11 firmware zip or you'll keep having an SOD
Sent from my A0001 using XDA Free mobile app
abhi08638 said:
Just an FYI, the tz assertion error has to do with not being on a cm12 firmware. Flashing the latest nightly automatically installs it for you. But if you want to go back to KitKat, you need to flash the cm11 firmware zip or you'll keep having an SOD
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Yep, just experienced that. I wen't back to Cm11 because i wasn't getting phone signal. Im on att. Do you know of a fix for this?
hosfordryan said:
Yep, just experienced that. I wen't back to Cm11 because i wasn't getting phone signal. Im on att. Do you know of a fix for this?
Click to expand...
Click to collapse
You need to flash the cm11 firmware zip or just the modem. You can find the files in the android development section
Edit: you can download the 05Q radio files from this thread
http://forum.xda-developers.com/showthread.php?t=2810365
Sent from my A0001 using XDA Free mobile app