[Q] Star N9500 Flash custom rom with cwm - General Questions and Answers

Hi Everyone
I am new here and urgently need some help!
Yesterday I followed the instructions exactly on http://forum.xda-developers.com/showthread.php?t=2323743
and everything went according to the instructions including 'A red bar will fill, followed by a purple bar, then yellow and finally a green circle showing the flash has been successful'
I exited the application and removed the battery from my phone for a few seconds and then replaced the battery and held the power button while holding vol up button but my phone would not turn on.
It does nothing,what can I do to get it back?
Please I will be very grateful if someone can advise me what to do next.
Dave

Related

[Q] Rooted HTC Inspire won't boot into clockwork recovery

Alright, guys, see if you can help me. Ive got a rooted HTC Inspire with the latest version of clockwork installed. I tried to flash a ROM of cyanogenmod7 onto my phone earlier from a download through ROM manager, but now my phone won't boot. It powers on, vibrates, shows the "HTC" on the screen, then repeats the whole process. I can't boot into clockwork recovery, either. I hold down both volume buttons and hit power then the phone vibrates 5 times. The green LED comes on, but no screen image is displayed.
Any clue on how to fix this, or even better, get into clockwork?
Also, i apologize if this question has already been asked.
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=1019868
EDIT: You need to hold only the volume down then power till you see the white screen. Not both volume buttons.
aeshaw95 said:
Alright, guys, see if you can help me. Ive got a rooted HTC Inspire with the latest version of clockwork installed. I tried to flash a ROM of cyanogenmod7 onto my phone earlier from a download through ROM manager, but now my phone won't boot. It powers on, vibrates, shows the "HTC" on the screen, then repeats the whole process. I can't boot into clockwork recovery, either. I hold down both volume buttons and hit power then the phone vibrates 5 times. The green LED comes on, but no screen image is displayed.
Any clue on how to fix this, or even better, get into clockwork?
Also, i apologize if this question has already been asked.
Click to expand...
Click to collapse
yeah just follow the GENERAL FIXES section in the thread that kirk123 posted
aeshaw95 said:
Alright, guys, see if you can help me. Ive got a rooted HTC Inspire with the latest version of clockwork installed. I tried to flash a ROM of cyanogenmod7 onto my phone earlier from a download through ROM manager, but now my phone won't boot. It powers on, vibrates, shows the "HTC" on the screen, then repeats the whole process. I can't boot into clockwork recovery, either. I hold down both volume buttons and hit power then the phone vibrates 5 times. The green LED comes on, but no screen image is displayed.
Any clue on how to fix this, or even better, get into clockwork?
Click to expand...
Click to collapse
There's a guide stickied to this general section that should help you.
http://forum.xda-developers.com/showthread.php?t=1033353
For one thing, I don't think holding down *both* power buttons does anything on this phone.
Vol-down (only) + power gets you to hboot.
Inspired Ace 1.0.1¦ XDA Premium
Yes, it's updating now in recovery. Thanks everyone! I knew that there was something I was doing wrong, as I had the same issue last night.
Thanks again for all the help!

[Q] Help for my Huawei Ideos U8150

Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!

[Q] Need help with a completely bricked Motorola RAZR XT910

Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
raza.javaid said:
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
Click to expand...
Click to collapse
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Hey,
The usual procedure is just to Hard Reset.
To do this, try
Step 1) With the phone off, Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously then while continuing to hold the VOL UP+ & VOL DOWN- buttons Press and Hold the POWER button till a menu appears.
Step 2) Use the VOL DOWN- button to navigate the menu & the VOL UP+ to select the RECOVERY option.
Step 3) When presented with a logo with an exclamation mark! Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously to bring up the next menu of options.
Step 4) Use the VOL DOWN- button to navigate the menu & the POWER button to select the Wipe data / Factory reset option.
Step 5) Use the VOL DOWN- button to navigate the menu to confirm this selection. Press the POWER button to begin the Factory Reset. (This may take a few minutes just be patient and wait.
Step 6) Once the task has completed press the POWER button to restart the device.
Source: Hard Reset Site
Or you may want to try manually flashing the original software to reset it back. You could try using flashtool.
Or You could contact the RC Help Chat 24/7
http://forum.xda-developers.com/showthread.php?t=1878241
Tell them what I said so they know where to go.
Thread Type: Can I haz Brick?
Hit Thanks if you found this useful
Silverlink34 said:
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Click to expand...
Click to collapse
Yes it takes me to the black boot up screen. I've tried charging and the phone charges up as well! That's a good sign!
Moto razr pricked and battry low
hi gays i thing this is my first time..i have Motorola razr xt 19 running ISC 4.0.4 I tried to flash cm 10 mod via recovery i do factory reset and i
formatting system when i reboot the phone it's stock on cm10 boot, more then an hour i have try to flash the oregnal fast-boot XML zip via RDS
but it's giving me that battery low fall, and i have try to charge the but its not charging???? please gays i need your help hot to charge the battery
sorry for my bad English

[Q] Please help,Getting Stuck on fastboot and recovery

Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance

[Completed] samsung galaxy s3, GT-I9300

my phone can't proceed further than showing a green battery icon with a red triangle with an exclamation mark in the triangle, i pressed the ok button it shows options, but clicked on reboot system now, then ok, it then takes me back to the battery icon, please help, what should i press to proceed with the rebooting of the system.
Regards
Lebo
You're going to have to give us a bit more information before we can help. What were you doing prior to this issue? Were you trying to root or tinkering with anything?

Categories

Resources