Related
Required:
Install B2CAppSetup.exe, LG PC Suite IV and related driver.
1. Run LGMobile update
2. Plug your optimus 3d (debug mode on) and wait for the connection
3a. If there is a new version, click on Start upgrading software for lg phone
3b. If you allready have latest version, click on User/Support then emergency mode, insert your IMEI and click on check
4. Wait for download and upgrading (15/20 min)
PS. you will loose root, but you will not loose data, data.img is untouched
PS2. if you got some problems, try again. I've tried few time before have a successfully flash.
Thanks Fabio!!
Trying it now
Lets hope it works
It Worked
I was on the right path before, but i took 3 tries to get it updated!
Thanks!
Renegade_Rulez said:
Trying it now
Lets hope it works
It Worked
I was on the right path before, but i took 3 tries to get it updated!
Thanks!
Click to expand...
Click to collapse
What do you mean by 3 tries? What error message were you getting, if any?
shollywood said:
What do you mean by 3 tries? What error message were you getting, if any?
Click to expand...
Click to collapse
It just stopped at 50% and the third time it worked.
Thanks....
I keep getting phone does not support S/W update message
Sent from my SCH-I510 using XDA App
I'm having the same problem as the person above me.. i tried so many times.. i still get the same message "software not supported for this model.."
Please help..
Im in the US , have a developer model on May software. I changed the country to UK and was able to install drivers. I installed Pc Suite. But still getting that error message stating my phone model don't support s/w update
Sent from my SCH-I510 using XDA App
largo79 said:
Im in the US , have a developer model on May software. I changed the country to UK and was able to install drivers. I installed Pc Suite. But still getting that error message stating my phone model don't support s/w update
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Is it possible your model is 925 and not 920?
We need CWM so we can make a backup before trying to mess around in the system
It seems my recovery partition was messed up so again install original rom...
Renegade_Rulez said:
We need CWM so we can make a backup before trying to mess around in the system
It seems my recovery partition was messed up so again install original rom...
Click to expand...
Click to collapse
ROM Manager should start supporting the p920 later today.
erezak said:
Is it possible your model is 925 and not 920?
Click to expand...
Click to collapse
No its a 920 as I'm getting the same. So your updater always defaults to USA when you open it up correct?
aremcee said:
ROM Manager should start supporting the p920 later today.
Click to expand...
Click to collapse
wow thanks
The famous CM developer aremcee, nice to see you here as well.
Really loving your work on the LG O2x!
Looking forward to use CM7 on my O3D as well if someone decides to pick up the challenge (hint hint )
Renegade_Rulez said:
wow thanks
The famous CM developer aremcee, nice to see you here as well.
Really loving your work on the LG O2x!
Looking forward to use CM7 on my O3D as well if someone decides to pick up the challenge (hint hint )
Click to expand...
Click to collapse
It'll be a while before that. We had zero support for OMAP4 in CM, and merging it in will have to be done carefully to avoid breaking everything else. The only thing I merged in already was the bootimage-building stuff, in order to get CWM out there.
aremcee said:
It'll be a while before that. We had zero support for OMAP4 in CM, and merging it in will have to be done carefully to avoid breaking everything else. The only thing I merged in already was the bootimage-building stuff, in order to get CWM out there.
Click to expand...
Click to collapse
No hurry for that, whenever you are ready we will see it
Thanks a lot for your hard work!
aremcee said:
ROM Manager should start supporting the p920 later today.
Click to expand...
Click to collapse
Done. You can now flash CWM from ROM Manager (and reboot into recovery, and backup, and all the neat stuff RM does) on the O3D.
aremcee said:
Done. You can now flash CWM from ROM Manager (and reboot into recovery, and backup, and all the neat stuff RM does) on the O3D.
Click to expand...
Click to collapse
Did my first backup feels good to be safe again!
Can I move the backup to external sd?
Sent from my LG-P920 using Tapatalk
Where can i find the CWM for this phone?
My phone model is LGP929 -- and its running the 08 software
Before flashing Cyanogenmod I really need to install ClockWorkMod? Because when I press power + volume some kind of pre-installed CWM appears and do have all the function I need (wipe/factory reset, select update from sd card etc) Can't I Install Cyanogenmod from there?
Sorry if I have bad english :angel:
Yes, you do need to install CWM. Also meaning of pre-installed CWM, it is Samsung Stock Recovery. It is very easy method to get CWM on your note.
i2nice said:
Yes, you do need to install CWM. Also meaning of pre-installed CWM, it is Samsung Stock Recovery. It is very easy method to get CWM on your note.
Click to expand...
Click to collapse
Thanks for answering! I got it, but I have another doubt, If I install Cyanogenmod in my device, I will have lower graphics in-game? Something like no developer optimisation for my ROM (no antialiasing, poor texture quality etc)? Or This depends of the device not the ROM?
flashing CWM also is very important because it has Backup and restore options which are not included in stock recovery
1st thing I do for years is taking nand backup to restore in case on any failure (which happens alot with trying roms and mods)
thermax04 said:
flashing CWM also is very important because it has Backup and restore options which are not included in stock recovery
1st thing I do for years is taking nand backup to restore in case on any failure (which happens alot with trying roms and mods)
Click to expand...
Click to collapse
I got it!
But If I install Cyanogenmod in my device, I will have lower graphics in-game? Something like no developer optimisation for my ROM (no antialiasing, poor texture quality etc)? Or This depends of the device not the ROM?
There is some way for I get custom Android themes and apps with samsung's ROM? Like update the apps to custom android apps? Can I substitute the notification bar too?
kokero said:
I got it!
But If I install Cyanogenmod in my device, I will have lower graphics in-game? Something like no developer optimisation for my ROM (no antialiasing, poor texture quality etc)? Or This depends of the device not the ROM?
There is some way for I get custom Android themes and apps with samsung's ROM? Like update the apps to custom android apps? Can I substitute the notification bar too?
Click to expand...
Click to collapse
Get Apex launcher or one of the other launchers available. Easy to theme and remains stock.
I don't believe you should have problems in games as the cm10 team use the aosp or aokp rom. Straight from google like on the nexus series. They then tweak and theme as they please...
ultramag69 said:
Get Apex launcher or one of the other launchers available. Easy to theme and remains stock.
I don't believe you should have problems in games as the cm10 team use the aosp or aokp rom. Straight from google like on the nexus series. They then tweak and theme as they please...
Click to expand...
Click to collapse
Ok, I I'm going to install Cyanogenmod, but I have Windows 8 so I need to disable driver signature enforcement, I've already did it, long time ago, to Install jelly bean on my Xperia Mini Pro, I need to do It again every time I'm going to install any custom ROM or it's a lifelong kind of thing?
kokero said:
Ok, I I'm going to install Cyanogenmod, but I have Windows 8 so I need to disable driver signature enforcement, I've already did it, long time ago, to Install jelly bean on my Xperia Mini Pro, I need to do It again every time I'm going to install any custom ROM or it's a lifelong kind of thing?
Click to expand...
Click to collapse
Every time I flash a custom rom I simply download the zip file and copy to the sd card. Flash using CWM...
Never disabled anything on my PC and it always works. I too have win 8...
ultramag69 said:
Every time I flash a custom rom I simply download the zip file and copy to the sd card. Flash using CWM...
Never disabled anything on my PC and it always works. I too have win 8...
Click to expand...
Click to collapse
So how did you flashed CWM? Cyanogenmod official wiki tells me this:
"NOTE: On Windows 8 you must disable driver signature enforcement in order to use zadig"
Link: http://wiki.cyanogenmod.org/w/Install_CM_for_n8000
kokero said:
So how did you flashed CWM? Cyanogenmod official wiki tells me this:
"NOTE: On Windows 8 you must disable driver signature enforcement in order to use zadig"
Link: http://wiki.cyanogenmod.org/w/Install_CM_for_n8000
Click to expand...
Click to collapse
You're using Heimdall, not ODIN.. ODIN easier to use though Heimdall good too.
If you are rootedalready you can also use Mobile ODIN, pro version to be safe.... Easiest way I know how...
ultramag69 said:
You're using Heimdall, not ODIN.. ODIN easier to use though Heimdall good too.
If you are rootedalready you can also use Mobile ODIN, pro version to be safe.... Easiest way I know how...
Click to expand...
Click to collapse
Im going tp use Cyanogenmod's official way of install, because I don't need to root first, thanks for helping me! I owe you one!
ultramag69 said:
You're using Heimdall, not ODIN.. ODIN easier to use though Heimdall good too.
If you are rootedalready you can also use Mobile ODIN, pro version to be safe.... Easiest way I know how...
Click to expand...
Click to collapse
For sure Odin method is better! But I need to root my device first? Or not?
I'm goig to do this procedure:
http://www.androidegis.com/how-to/i...ckworkmod-touch-recovery-on-galaxy-note-10-1/
And then:
http://www.androidegis.com/how-to/install-official-cyanogenmod-10-1-nightlies-for-galaxy-note-10-1/
kokero said:
For sure Odin method is better! But I need to root my device first? Or not?
I'm goig to do this procedure:
http://www.androidegis.com/how-to/i...ckworkmod-touch-recovery-on-galaxy-note-10-1/
And then:
http://www.androidegis.com/how-to/install-official-cyanogenmod-10-1-nightlies-for-galaxy-note-10-1/
Click to expand...
Click to collapse
Yep, that should be ok... Root and CWM first then CM10...
Just a suggestion, in ODIN untick "reboot". This way you can go to recovery before it reboots and changes back to stock recovery... It does this so you do need to boot to recovery afterwards manually. volume up + power until logo appears then release power button... Then you can flash CM10 but make sure to follow all the steps...
Oh yeah, in ODIN, DON'T TICK REPARTITION... You will end up with a big problem if you do...
It is cooked from the Google stock image for tilpia and is NOT deodexed
This is the first time i am posting a ROM on XDA.
Been cooking ROM's for a while for my old Samsung devices.
The whole reason for this thread is to have a flashable zip for any Nexus 7(2012) 3g user who wishes to stay stock.
I have tested it on my Nexus 7, if anyone has any issues do let me and please bear with me as im not a developer and just sharing what i personally use.
Will try and help with what ever i can.
************** For some Reason the boot logo does not show up, dont worry, wait for sometime, the ROM will boot up***********
Note:
1. Works with multirom.
2. Odexed for my personal use, if anyone wishes to de-odex it, do let me know.
3. This includes the stock kernel. I also tested the latest stable mkernel which is for 4.4.2 and works fine.(works with the new kitkat 4.4.4 too)
Screenshot attached
Downloads:
4.4.4:
tilapia.v2
Mirror
Radio for 4.4.4
md5 for Radio: 64920d406852d92b478c3ab17383ecce
4.4.3:
tilapia.v1
md5 : 5c4d3b47274000cf6d5326d14ab7cc81
Click to expand...
Click to collapse
Installation:
1. Reboot to recovery
2. Do a factory reset.
3. Go to advanced wipe settings and select system, dalvik and cache and format them.
4. Flash Rom
First boot takes time, wait patiently. There wont be any boot animation, so wait on that black screen for sometime
Profit :good:
Click to expand...
Click to collapse
credits: @JustArchi
Let me know guys if there is any issue. Im little busy this weekend, will take little time to add things like Advanced reboot menu, battery % and debloat.
phanitej said:
Let me know guys if there is any issue. Im little busy this weekend, will take little time to add things like Advanced reboot menu, battery % and debloat.
Click to expand...
Click to collapse
Hi, Can I flash this over 4.4 [KRT16O]? Please advise. Thanks.
gwong76 said:
Hi, Can I flash this over 4.4 [KRT16O]? Please advise. Thanks.
Click to expand...
Click to collapse
Update your bootloader and radio first. And clean flash is recommended though there are not much of changes from 4.4.2 but as you mentioned you are using 4.4 clean wipe and installing is preferred.
thank you very much! stock rocks! :good::good:
PS: root & bbox?
Thanks alot
Hi!
First of all - thanks for your clean/xposed ROM.
I only have one question. Would it still be possible to send SMS from my Tilapia-tablet (Nexus 7-2012/3G) after flashing your ROM?
BTW : @RomerGG - The threads' header should already have answered your question...
Regards,
Roy
roygaard said:
Hi!
First of all - thanks for your clean/xposed ROM.
I only have one question. Would it still be possible to send SMS from my Tilapia-tablet (Nexus 7-2012/3G) after flashing your ROM?
BTW : @RomerGG - The threads' header should already have answered your question...
Regards,
Roy
Click to expand...
Click to collapse
Haven't tried that. Unfortunately i have a pure data plan, so my provider restricts sms by default. And i cant take out the sim and replace as i was once trying to break open my sim slot and take out the sim, during that crazy struggle i guess i broke that sim holder. so once the sim comes out, i have to struggle a lot to get the network back on by replacing it
Edit: dont think hangouts will give the sms sending option by any chance. So try with a third party app and let us know
Thanks for the stock rooted rom. FYI, I had flashed CF SuperSU v1.99r4 and also MKernel a67, looks okay so far. I'm updating the Google apps from Play store now. Once done, I'll be installing TB to restore my apps.
One word of caution to those flashing this rom. Note that there seems to be no bootanimation, so don't be mistaken that the rom is not working. Give it time to boot up. :good:
Edit:
One thing I noticed strange is in TB, System ROM is showing 670MB (8.45 MB free). Before this, I was on 4.4.2 stock rooted, before I manually flashed boot.img and system.img. It was showing same results, but 9.XX MB free. Is this correct? I vaguely remembered that it should be almost 900 plus MB. Can anyone confirm?
phanitej said:
Update your bootloader and radio first. And clean flash is recommended though there are not much of changes from 4.4.2 but as you mentioned you are using 4.4 clean wipe and installing is preferred.
Click to expand...
Click to collapse
Sorry for this stupid question. How can I updated these .img files ?
Thank you for this work!! I had the slimkat, I did a wipe recovery and then I installed. Where is the menu button?
Art is not activated?
apinun_po said:
Sorry for this stupid question. How can I updated these .img files ?
Click to expand...
Click to collapse
To flash them you need to enable USB debugging and then reboot to bootloader. Here use the following fastboot commands.
For Updating bootloader:
fastboot flash bootloader name_of_the_bootloader_file.img
For radio:
fastboot flash radio name_of_the_radio_file.img
If you want a detailed instruction, go here and follow Method 2.
sbarrett said:
Thank you for this work!! I had the slimkat, I did a wipe recovery and then I installed. Where is the menu button?
Art is not activated?
Click to expand...
Click to collapse
It is the same file as the one google pushes for Nexus 7 device. So what ever is present in the original stock image, will be there.
Menu button is only active in apps that give it by default, there is an xposed module which can activate menu button in every app.
For ART, not sure why google misses the option to switch to ART every time on Nexus 7 devices. Will check and see how to add that option.
phanitej said:
To flash them you need to enable USB debugging
Click to expand...
Click to collapse
Thank you very much.
Kitkat 4.4.4 is out and the stock rooted version is tested and :good:uploaded.
One quick question my all friend here. 4.4.4 still dalvik or run as ART
Sent from my GT-I9205 using Tapatalk
yusopa said:
One quick question my all friend here. 4.4.4 still dalvik or run as ART
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
It is dalvik. Google does not seem to want including ART for the nexus 7. Read somewhere on google forums that it might be a hardware issue cos of which they are not including it.
flashing aborted
Version tilapia2 flashing aborted, version tilapia 1 ok. Do you know where is the problem? Using the latest version of the recovery v6.0.4.3.
Good work! I maintain BSZKitKat for grouper (ODEX and DEODEX). Awesome job getting right in front of the 4.4.4 update!
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
phanitej said:
It is dalvik. Google does not seem to want including ART for the nexus 7. Read somewhere on google forums that it might be a hardware issue cos of which they are not including it.
Click to expand...
Click to collapse
Correct - we lack sufficient space on the /system partition for the binaries required for switching to ART
Cant' flash this rom, i get an error and the message FAILED.
I'm using TWRP recovery 2.7.
Can we have a flashable zip please?
It is much easier to deal with!
Thanks
I have a rooted StraightTalk SCH-S968C Samsung Galaxy S III (with the stock AOSP ROM) that I just screwed up. I had used EZ-Recovery to flash TWRP 2.2.0 to the phone. Now TWRP says there is no OS! I can only boot into TWRP - nothing else. It won't even let me power-down the phone. Is there some way I can recover from this, or do I now have a very expensive electronic brick (that runs TWRP)? I have adb installed on my laptop and I know it works, so that's one possible route to recovery. Any help would be much appreciated!
ScottDB said:
I have a rooted StraightTalk SCH-S968C Samsung Galaxy S III (with the stock AOSP ROM) that I just screwed up. I had used EZ-Recovery to flash TWRP 2.2.0 to the phone. Now TWRP says there is no OS! I can only boot into TWRP - nothing else. It won't even let me power-down the phone. Is there some way I can recover from this, or do I now have a very expensive electronic brick (that runs TWRP)? I have adb installed on my laptop and I know it works, so that's one possible route to recovery. Any help would be much appreciated!
Click to expand...
Click to collapse
I'm pretty sure it's possible to return it completely to stock with the COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV09_user_low_ship.tar.md5 file through Odin. I just to happen to have the file right here.. small warning though, it's 1.2 gigs.
https://mega.co.nz/#!gRI3DD5L!dRW8ORzfQI5j1JyKHVBTNifomPCXoqL14B9GF4oxvQY
aekel87 said:
I'm pretty sure it's possible to return it completely to stock with the COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV09_user_low_ship.tar.md5 file through Odin. I just to happen to have the file right here.. small warning though, it's 1.2 gigs.
https://mega.co.nz/#!gRI3DD5L!dRW8ORzfQI5j1JyKHVBTNifomPCXoqL14B9GF4oxvQY
Click to expand...
Click to collapse
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!
Deleted.
ScottDB said:
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!
Click to expand...
Click to collapse
Thank you!!!! I just had the same problem. However even when using cwm i get errors in the recovery. Unable to mount anything or do anything besides reboot. Any ideas?
need stock Firmware
Have any idea where i can get this file? Ive bricked my phone too. Durnnit!
iamwaynes said:
Have any idea where i can get this file? Ive bricked my phone too. Durnnit!
Click to expand...
Click to collapse
This is the h1 stock you need. type this in google you should find the download if not I have it.
COMBINATION_S968CUDUAMH1_S968CTFNAMH1_1304014_REV0
Dont use e-z recovery. I had the same problem neither cwm or twrp from ez recovery worked and then cwm said no os on my phine so I flashed that file from download mode and was back to stock.
How did u find a recovery that worked mine is saying the same thing
Sent from my SM-N900T using Tapatalk
iamwaynes said:
How did u find a recovery that worked mine is saying the same thing
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1771398
In that thread go down to method 2 of getting a custom recovery. I downloaded cwm touch from the link there and then installed it with android terminal emulator using the codes that it says to type in. I tried to look up that stock rom but I didnt find it. Its on the forum somewhere in a thread about how to root the straight talk s3 and how first you need to download and flash the h1 baseband stock rom
Thanks I found the stock rom fixing it now.
Sent from my SM-N900T using Tapatalk
iamwaynes said:
Thanks I found the stock rom fixing it now.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Ok I've re rooted and tried to install recovery. Odin put it in wrong place. Says no operating system . What now?
Sent from my SM-N900T using Tapatalk
iamwaynes said:
Ok I've re rooted and tried to install recovery. Odin put it in wrong place. Says no operating system . What now?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Have you gotten recovery installed and straightened out yet?
Let me know if you need some help, tell me where you're at and what you've got going on with what you have.
I returned phone to stock. The recovery wasn't in the right place obviously. So that's where I am . Stuck back at stock. Thanks for any help you can give.
Sent from my SM-N900T using Tapatalk
iamwaynes said:
I returned phone to stock. The recovery wasn't in the right place obviously. So that's where I am . Stuck back at stock. Thanks for any help you can give.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Are you on stock not rooted or you are rooted?
Do you have stock recovery or custom.
I can get you to wherever you need or want. Tell me what you need or where you'd like to be.
Droidriven said:
Are you on stock not rooted or you are rooted?
Do you have stock recovery or custom.
I can get you to wherever you need or want. Tell me what you need or where you'd like to be.
Click to expand...
Click to collapse
I have combined 2 s3's to make one good one. This is the proper thread for the model of the chipset. The phone has been worked on buy someone who only thought they were a genious. I've found traces and from surfing the forums I'm pretty sure I know what they did even. I'm gonna grab these stock images and flash back to stock. I just wanted to put a word in now to see how dead this thread is. BTW just for the record easy safe root is achievable with safroot for Att g s 4. I've confirmed that. Root is no issue. Modem drivers are jacked up. I want what I have now with WiFi in tact and custom recovery. Just wanted to get the word in in case I hit a wall with recovery as I am now before the flash to stock. Thanks in advance for any help. Sorry for the ramble
---------- Post added at 07:23 AM ---------- Previous post was at 07:03 AM ----------
ScottDB said:
That's the file I am offering to host on my Website, since nobody seems to be able to download it from Dropbox. I'm having trouble downloading it from Mega... Since the file is over 1 GB, Mega insisted I needed to download their extension, but it's not compatible with Firefox 22. I tried Chrome, and Mega says that Chrome on my laptop is "a bit outdated"... sheesh! I'll try and update it.
(added later) - I found a Dropbox link for the file and it's downloading now.
If you want to FTP the file to my Website, let me know by PM and I'll give you the username and password.
I tried using fastboot to install CWM Recovery, but fastboot is eternally "waiting for device" even though it's there (adb can see it).
Aug. 7 - Got the file I needed, but didn't use it since Windows7 would not recognize the phone even after I installed the drivers. (I think it was an issue with automatic updates being disabled...) In the meantime... I tried the button-combo for the bootloader (which I swore I tried the day before and it didn't work), and the phone booted into the bootloader! From there, I pressed "Volume down" to cancel & reboot the phone, and it went into the stock system - it was all still there! First thing I did was immediately use EZ-Recovery to flash CWM 5.8.4.5. - Issue resolved!
Click to expand...
Click to collapse
Does anyone have a good link for h1 stock. All the links I can find including aa51 are dead. I need to go stock to fix the modem. I can handle everything from there I just need stock and I've trolled XDA , aa51, and several others. All links are dead. Probably for a long long time . any help is greatly appreciated
---------- Post added at 07:42 AM ---------- Previous post was at 07:23 AM ----------
sazendrak said:
I have combined 2 s3's to make one good one. This is the proper thread for the model of the chipset. The phone has been worked on buy someone who only thought they were a genious. I've found traces and from surfing the forums I'm pretty sure I know what they did even. I'm gonna grab these stock images and flash back to stock. I just wanted to put a word in now to see how dead this thread is. BTW just for the record easy safe root is achievable with safroot for Att g s 4. I've confirmed that. Root is no issue. Modem drivers are jacked up. I want what I have now with WiFi in tact and custom recovery. Just wanted to get the word in in case I hit a wall with recovery as I am now before the flash to stock. Thanks in advance for any help. Sorry for the ramble
---------- Post added at 07:23 AM ---------- Previous post was at 07:03 AM ----------
Does anyone have a good link for h1 stock. All the links I can find including aa51 are dead. I need to go stock to fix the modem. I can handle everything from there I just need stock and I've trolled XDA , aa51, and several others. All links are dead. Probably for a long long time . any help is greatly appreciated
Click to expand...
Click to collapse
Finally found it here
https://forum.xda-developers.com/showthread.php?t=2516498&page=28
Essential one to stock firmware: together rooted system get TWRP 2.8.7.0.
Explain in great detail:
First specify the version of the firmware: Settings - About tablet - see on line Build number, for example, ***.20160216.*** (or 20160307, 20160429). In accordance with the version download the attached files.
From the thread Chainfire download TWRP / FlashFire installable ZIP, any choice - Stable, Beta or Latest. Archive ***-SuperSU-***.zip put in any useful folder in tablet.
Tablet is completely off, certainly from Android, simultaneously pressing power button and both volume "+" and "-" to boot your device in DNX Fastboot Mode (relevant notes on-screen will appear). Connect to computer that is already pre-installed the drivers (see attachment).
On the computer, launch the FLASH.bat from the extracted archive with TWRP. Wait until the script completes, devices disconnect.
In the tablet volume key to select "Recovery Mode" and power button to reboot the device in TWRP.
In TWRP to install the archive with superuser: Install - select the file - Swipe to Confirm Flash - Reboot system.
That's all, folks! © Disney
In addition TWRP installs insecure boot.img with screen density to 280 dpi.
Credits
@Chainfire for superuser;
@mirek190 for permission to use his fantastic flash tool (I changed it a bit for the installation TWRP);
thanks to Dani Basabe for sharing TWRP-2.8.7.0_teclast_x98pro-b2 (details see here)
and thank me for the work done.
Download
Intel drivers
twrp_0216
twrp_0307
twrp_0429
twrp_0531
twrp_remix_1.0.5(v5_7)
twrp_remix_1.0.5(v7)
twrp_0706
twrp_0729
My tablet is 20160324. Which version of twrp must I use?
perama said:
My tablet is 20160324. Which version of twrp must I use?
Click to expand...
Click to collapse
Interesting question. I don't see this firmware version in the official and not official sources. The problem isn't TWRP - it's the same everywhere - but in unlocked boot.img. I'm unable to recommend anything, I have no boot.img 20160324.
Please look at the screen shot from my tablet.
i bought it from GearBest.
Can I try all the versions you have uploaded to find out which one will work? Or I will damage my tablet this why?
perama said:
Please look at the screen shot from my tablet.
i bought it from GearBest.
Can I try all the versions you have uploaded to find out which one will work? Or I will damage my tablet this why?
Click to expand...
Click to collapse
Yes, do you have Onda CH - cht_cr_mrd_w. Take any set, but remove from it the boot.img, install TWRP and make a backup of the boot.img and here put, please.
I have a feeling that the Chinese are a hundred variations of iron made.
Thank you very much for helping me!
You mean, first to delete the file "boot.img" from folder "rom", then to run "flash.bat" to install "TWRP recovery" only and finally to make a backup of my "boot.img" and upload it here?
Without unlocked "boot.img" I can't make my tablet rooted?
perama said:
Without unlocked "boot.img" I can't make my tablet rooted?
Click to expand...
Click to collapse
You can try to flash SuperSU without unlocked boot - I havn't to get root access without changing it. But all of a sudden? I followed the path blazed by Teclast and Cube.
perama said:
You mean, first to delete the file "boot.img" from folder "rom", then to run "flash.bat" to install "TWRP recovery" only and finally to make a backup of my "boot.img" and upload it here?
Click to expand...
Click to collapse
Yes.
I installed TWRP and then booted to recovery. I backed up "boot.img" but then the tablet turned off by its own!
When I tried to turned it on again to Android, it keeps stay to 'Intel" logo for ever!
I don't know what to do! Please help me!
It boots to Windows without problem.
I manage to install the 0531 version using your instructions !
Everything works perfect including the sound!
Now I will try to root my device using your instruction above.
I will let you know... Thank you very much for your help!!!
I manage to root my tablet.
Everything is working fine now!
Thank you very much ViAlexSt! You are a life saver!
Mine has a 20160323 version! I think we are being played with.... Those numbers are a lot of versions!
What should I do? Perhaps the same as perama? I want to do a nandroid backup first, naturally.
Any suggestions?
pouskidis said:
Mine has a 20160323 version! I think we are being played with.... Those numbers are a lot of versions!
What should I do? Perhaps the same as perama? I want to do a nandroid backup first, naturally. Any suggestions?
Click to expand...
Click to collapse
I don't know whether to read this topic anyone else besides me, but I find it difficult to answer unequivocally. If you are not afraid - try to put the firmware 0531. And then TWRP.
I just wanna root the damn thing...
I already got i2c HID Device data failure once, just 2 days after I bought it.
Had to open the case and fix it, so yes, I am prete much afraid...
Is this 0531 version English f/w with no chinese? So, it just needs rooting?
Thanks ViAlexSt for all the help you provide us.
pouskidis said:
Is this version English f/w with no chinese?
Click to expand...
Click to collapse
Here's what Chinese maybe? Here installation packages with the insecure boots and TWRP for the flashing of the SuperSU.
pouskidis said:
I already got i2c HID Device data failure once, just 2 days after I bought it.
Had to open the case and fix it, so yes, I am prete much afraid...
Click to expand...
Click to collapse
The installation package must match the version of existing firmware.
ViAlexSt said:
Here's what Chinese maybe? Here installation packages with the insecure boots and TWRP for the flashing of the SuperSU.
The installation package must match the version of existing firmware.
Click to expand...
Click to collapse
So, you suggest to wait for someone with my frimware to post it?
Also, did you say that v0531 is English with no Chinese programs? Sorry, I did not understand correctly...
pouskidis said:
So, you suggest to wait for someone with my frimware to post it?
Click to expand...
Click to collapse
I don't know what version of firmware you have installed. You can of course try to install the most recent version - 0531, but may lose sound if the modification of iron is not adequate. Look at the serial number on the back cover: if it in the form .....G4V7...... - you can safely install 0531.
pouskidis said:
Also, did you say that v0531 is English with no Chinese programs? Sorry, I did not understand correctly...
Click to expand...
Click to collapse
Firmware version 0531 international, with pre-installed gapps and no Chinese, but firmware is discussed in another topic Here, only the activation of root access.
ViAlexSt said:
I don't know what version of firmware you have installed. You can of course try to install the most recent version - 0531, but may lose sound if the modification of iron is not adequate. Look at the serial number on the back cover: if it in the form .....G4V7...... - you can safely install 0531.
Firmware version 0531 international, with pre-installed gapps and no Chinese, but firmware is discussed in another topic Here, only the activation of root access.
Click to expand...
Click to collapse
I do have a v7 model... So I can proceed I guess. Sorry for the off topic, I just thought I would do a nandroid backup/root first. But installing 0531 from the start somehow seems safer?
Thanks
pouskidis said:
I do have a v7 model
Click to expand...
Click to collapse
G4 or G3 revision? If G4, then any available firmware will do. With G3 harder - there may be issues with wake tablet from sleep.
pouskidis said:
I just thought I would do a nandroid backup/root first. But installing 0531 from the start somehow seems safer?
Click to expand...
Click to collapse
Any firmware version will not make the tablet a brick. The only question is the presence of bugs: sound, sleep, overheating...
Look at the messages of реrama: he set TWRP with no boot, even made a backup, but without unlocking boot, the tablet doesn't start. He had to flash the version 0531, which, however, fit perfectly under his revision of "iron".
I have G4v7 revison. I guess I am good to go. I don't want any overheating problems, like "Throttling Brightness due to Thermal event" problems I had with Onda V919 Air 3G 64GB Intel Z3735F.
I had themal problems and shutdowns and was forced to return the product...
EDIT: I managed to root it after installing the PERFECT 0531 EN firmware.
The tablet is PERFECT now!
Thanks ViAlexSt!
I always get "failed to get partition boot".
I think there is an error in fstab.
When I manage to run TWRP, it fails to mount /data.
Any ideas?
V919 Air CH, 64 GB Android 5.1
oz42 said:
I always get "failed to get partition boot".
I think there is an error in fstab.
When I manage to run TWRP, it fails to mount /data.
Any ideas?
V919 Air CH, 64 GB Android 5.1
Click to expand...
Click to collapse
Hmm, interesting... While no specific ideas. I (and not only) have everything working. What version of firmware? Script when you install TWRP fulfills completely, without any errors? It's possible that not removed the OEM lock. Try to put the checkboxs in "Developers section" in "Settings".