Database Info

(Replica) Messed up my HDC Galaxy S4 Spark

So i installed Drivers for it, success (after few attempts)
Then Took battery out,
Started Flash Upgrade using Flash Tool
Eventually got the Green Circle
and then tried to turn my phone on.
Just a slightly back lit screen that is blank
I followed all instructions.
It is the correct model ROM i had downloaded.
I need urgent help
Thank you in advance
Kind Regards
Zak Brindle

Download the ROM from www.needrom.com
Install it with SPFlashTools

Fusquinha77 said:
Download the ROM from ***needrom
Install it with SPFlashTools
Click to expand...
Click to collapse
Thank you for the fast reply, i will try this and get back to you
Kind Regards
Zak

Fusquinha77 said:
Download the ROM from needrom
Install it with SPFlashTools
Click to expand...
Click to collapse
Unfortunatly that still didnt work, Attatched are two images of me completing the process, but still a blank screen and no startup logo, then turns back off, please help me.
Regards
Zak

Hmmmm... Strange. Worked for me...
I will try to upload my phone's ROM and give you the link. But I can only do this tomorrow, ok?

Fusquinha77 said:
Hmmmm... Strange. Worked for me...
I will try to upload my phone's ROM and give you the link. But I can only do this tomorrow, ok?
Click to expand...
Click to collapse
Okay thank you SOOO much for that, Another question, is it possible that they sent me a Legend instead of a Spark and thats why the Spark ROM bricked my phone? How would i tell the difference between the two?
And thanks again for the support.

ZakBrindle said:
Okay thank you SOOO much for that, Another question, is it possible that they sent me a Legend instead of a Spark and thats why the Spark ROM bricked my phone? How would i tell the difference between the two?
And thanks again for the support.
Click to expand...
Click to collapse
The phones are same, the difference is the roms

zebstera said:
The phones are same, the difference is the roms
Click to expand...
Click to collapse
Out of curiosity i downloaded a ROM for the Legend, I installed that and it seems they have sent me a HDC Galaxy S4 Legend because after flashing with that ROM it works perfect. I did buy a Spark but was sent a Legend. What is different on the ROMs? Sorry for all the questions, new to ROMs

Zak, which ROM did you download? I'll try it on my Spark.
Do you still want my ROM?
To know if you have a Legend, you should:
See this video on YouTube: http://youtu.be/utXbKdbDcyI
Go to a store and put an S-View cover on it. Close it. If it works, (S-View mode) you have a Legend!
Other good test: Spark has only 1-side gesture. Legend has both-sides gesture working. How about yours?
---------- Post added at 08:59 PM ---------- Previous post was at 08:04 PM ----------
zebstera said:
The phones are same, the difference is the roms
Click to expand...
Click to collapse
Zebstera, I think they are almost the same, but don't know if they are exactly the same
I've tried a Legend Rom on my Spark and it did not bootup
I'll wait for Zak's response and try his ROM on my Spark, then I tell you.

Fusquinha77 said:
Zak, which ROM did you download? I'll try it on my Spark.
Do you still want my ROM?
To know if you have a Legend, you should:
See this video on YouTube: http://youtu.be/utXbKdbDcyI
Go to a store and put an S-View cover on it. Close it. If it works, (S-View mode) you have a Legend!
Other good test: Spark has only 1-side gesture. Legend has both-sides gesture working. How about yours?
---------- Post added at 08:59 PM ---------- Previous post was at 08:04 PM ----------
Zebstera, I think they are almost the same, but don't know if they are exactly the same
I've tried a Legend Rom on my Spark and it did not bootup
I'll wait for Zak's response and try his ROM on my Spark, then I tell you.
Click to expand...
Click to collapse
S-View Cover works
Side gesture both ways works
So i have a HDC Galaxy S4 Legend
Thats better i guess then?

Lucky man!!! Congratulations!
Please tell me which ROM you downloaded

ZakBrindle said:
So i installed Drivers for it, success (after few attempts)
Then Took battery out,
Started Flash Upgrade using Flash Tool
Eventually got the Green Circle
and then tried to turn my phone on.
Just a slightly back lit screen that is blank
I followed all instructions.
It is the correct model ROM i had downloaded.
I need urgent help
Thank you in advance
Kind Regards
Zak Brindle
Click to expand...
Click to collapse
Zak. I have your same problem. Tried updating to fluffy rom but ended up causing my phone to ?brick. Now it won't start. No LED, no back light .... nada. Connects though to SP flash tools and can read back, do memory test and able to upload scatter file which only ticks both bootimg and recovery. Don't have the files for the rest (ie preloader, mbr etc etc).
I see from your screen shot you managed to download the whole spark rom with the files I need. Where did you get it?
Did you revive your phone? I hope there's hope for mine....
---------- Post added at 08:59 PM ---------- Previous post was at 08:57 PM ----------
ZakBrindle said:
Out of curiosity i downloaded a ROM for the Legend, I installed that and it seems they have sent me a HDC Galaxy S4 Legend because after flashing with that ROM it works perfect. I did buy a Spark but was sent a Legend. What is different on the ROMs? Sorry for all the questions, new to ROMs
Click to expand...
Click to collapse
Did you download both ROM's from needrom?
Can't seem to get into needrom.com for the last 2 days!

docteec; said:
Did you download both ROM's from needrom?
Can't seem to get into needrom.com for the last 2 days!
Click to expand...
Click to collapse
I am uploading my SPARK ROM. Please Stay tuned.
---------- Post added at 05:48 PM ---------- Previous post was at 05:47 PM ----------
ZakBrindle said:
S-View Cover works
Side gesture both ways works
So i have a HDC Galaxy S4 Legend
Thats better i guess then?
Click to expand...
Click to collapse
Where did you download your Legend ROM?

The S-view flip cover works on mine. It can also respond to calls with air gestures. Everything that a Legend can do plus the Spark features. But it is not a Legend. I tried to flash the -fluffy- Rom for Legend and it soft bricked. I think the early versions of Spark didnt have the S-View cover support and had only 1-way gesture support. The latest ones were updated by the looks of it.

Nickrus21 said:
The S-view flip cover works on mine. It can also respond to calls with air gestures. Everything that a Legend can do plus the Spark features. But it is not a Legend. I tried to flash the -fluffy- Rom for Legend and it soft bricked. I think the early versions of Spark didnt have the S-View cover support and had only 1-way gesture support. The latest ones were updated by the looks of it.
Click to expand...
Click to collapse
Ok, Nick, so, can U please tell me what ROM did you download? I wanna try it in my SPARK

Fusquinha77 said:
Ok, Nick, so, can U please tell me what ROM did you download? I wanna try it in my SPARK
Click to expand...
Click to collapse
The only ROM I tried was the -fluffy- one. It is the Stock ROM I am using right now.

Nickrus21 said:
The only ROM I tried was the -fluffy- one. It is the Stock ROM I am using right now.
Click to expand...
Click to collapse
I understood. What I need is the link to the STOCK ROM you are using.

Fusquinha77 said:
I understood. What I need is the link to the STOCK ROM you are using.
Click to expand...
Click to collapse
The stock ROM came together with the phone, I didnt download it. It is probably the one you have now too. My build number starts with JDQ39. All phones with that number should have the same ROM on it. I could be mistaking though.
Looks like I have the same phone with ZakBrindle.

Nickrus21 said:
The stock ROM came together with the phone, I didnt download it. It is probably the one you have now too. My build number starts with JDQ39. All phones with that number should have the same ROM on it. I could be mistaking though.
Looks like I have the same phone with ZakBrindle.
Click to expand...
Click to collapse
Ahhhhhhnnn... Now I understood. Sorry.
My build number is differente from yours: ALPS.JB2.MP.V1.2
I will download all Legend ROMS from Needrom to see if any has JDQ39 build number, in order to try it on my SPARK
If you connect your phone to MTKDroid Tools, what you get about LCD Driver IC and uBoot build v?
How about your display: is it 2-point or 5-point multitouch?

Fusquinha77 said:
Ahhhhhhnnn... Now I understood. Sorry.
My build number is differente from yours: ALPS.JB2.MP.V1.2
I will download all Legend ROMS from Needrom to see if any has JDQ39 build number, in order to try it on my SPARK
If you connect your phone to MTKDroid Tools, what you get about LCD Driver IC and uBoot build v?
How about your display: is it 2-point or 5-point multitouch?
Click to expand...
Click to collapse
5-point multitouch.
Also, if i look with MTK Droid Tools, my build number is also ALPS.JB2.MP.V1.2. But in Settings it shows different. LCD and UBoot are
---- should be root shell.

[Q] Immersive Mode on Jelly bean?

Hi, Since i'm a newbie and just got rooted and tweaked a lot about my phone.. theres this one thing that bothers me. im using slidelock as a main lockscreen.. and the navigation bar just wont hide.. its there and its black. and it ruins the look of the app.. can somebody there knows how to solve this problem? Im on a 4.2.2 Jellybean and my navigation bar is just from the xposed too... but if somebody out there can teach me how to solve this problem. or even better.. hide the navigation bar when opening apps and the navigation bar comes back when i tap the screen.. that would be really really helpful please I need your help. Thanks

What phone is it? If you don't use tablet mode or anything then installing a kitkat rom is probably the easiest way as until someone writes an xposed module for it or until someone tries to go into the source code of it then it isn't really possible.

dreamwave said:
What phone is it? If you don't use tablet mode or anything then installing a kitkat rom is probably the easiest way as until someone writes an xposed module for it or until someone tries to go into the source code of it then it isn't really possible.
Click to expand...
Click to collapse
It is not a common phone.. I really want to install a kitkat rom to it.. But i dont know how to and this phone is not common and its a local brand from my country. It has OTA but it hasnt updated to kitkat since it was released.. Can you help me flash a custom kitkat or cyanogenmod rom to myphone? My phone is called Starmobile Octa it is a rebranded phone of Indias IQ X mobile octo. Thanks for the response

Np I'll see if I can find any kitkat roms for it for you and report back
---------- Post added at 01:10 AM ---------- Previous post was at 01:07 AM ----------
I'll do it in the morning as its 1 am here right now

dreamwave said:
Np I'll see if I can find any kitkat roms for it for you and report back
---------- Post added at 01:10 AM ---------- Previous post was at 01:07 AM ----------
I'll do it in the morning as its 1 am here right now
Click to expand...
Click to collapse
Omg thanks man, if you have any questions about my phone i'll answer it if i can find it

I'll see if I can get my computer to a state I could build a cm11 rom for you but no promises

dreamwave said:
I'll see if I can get my computer to a state I could build a cm11 rom for you but no promises
Click to expand...
Click to collapse
do you already know the info about my phone? Thank you so much. If you cant build me one thanks for the effort anyways.. maybe in the future someone will create a simple module thatll hide my nav bar

[Q&A][5.0.1] Cyanogenmod--12 [UNOFFICIAL]

Please feel to discuss non developmental topics or ask your queries here !

I think solving the camera. battery consumption . and LTE.y 3G and mobile data load off. So are the problems that you and found
the recovery does not work. must be re- flash the back of 4.4.2.y flash the boot.img from the original rom
---------- Post added at 10:41 AM ---------- Previous post was at 10:29 AM ----------
on gapps header thread.
do not work. the device is slow. You can put these as optional or change the main delhilo . my I have worked in the xperia sp and m2 properly.
the two devices cm12
https://www.androidfilehost.com/?fid=95784891001612867

alba46d said:
I think solving the camera. battery consumption . and LTE.y 3G and mobile data load off. So are the problems that you and found
the recovery does not work. must be re- flash the back of 4.4.2.y flash the boot.img from the original rom
---------- Post added at 10:41 AM ---------- Previous post was at 10:29 AM ----------
on gapps header thread.
do not work. the device is slow. You can put these as optional or change the main delhilo . my I have worked in the xperia sp and m2 properly.
the two devices cm12
https://www.androidfilehost.com/?fid=95784891001612867
Click to expand...
Click to collapse
Recovery is in initial state, its not usable now!

RootLord said:
Recovery is in initial state, its not usable now!
Click to expand...
Click to collapse
That's a "CM recovery". CM's attempt at recoveries not my fault

galaxyfreak said:
That's a "CM recovery". CM's attempt at recoveries not my fault
Click to expand...
Click to collapse
Yup.. I too said same [emoji12][emoji13]

If this rom used the unified kernel for msm8226, then that means D2305 could also be working with it ( RIL will be an important thing to test ). And what do you mean by shutdown not working ? Does it apply to restart too ?

vusun123 said:
If this rom used the unified kernel for msm8226, then that means D2305 could also be working with it ( RIL will be an important thing to test ). And what do you mean by shutdown not working ? Does it apply to restart too ?
Click to expand...
Click to collapse
Hahaha nice shot. Thing is - build I released already use unified kernel. Unified as in, works on many devices, not variants (if you took same kernel, flashed it on Z3 it would work).
And by shutdown not working i mean it reboots instead of shutdown.

Oh that, I thought it won't even attempt to reboot. Ok, will flashing this rom in about an hour and let see how this goes
Edit: Flashed it, black screen and vibrating, the same situation as with D2302 users. Btw, can I ask you if D2305 is gonna be in the support list soon

vusun123 said:
Oh that, I thought it won't even attempt to reboot. Ok, will flashing this rom in about an hour and let see how this goes
Edit: Flashed it, black screen and vibrating, the same situation as with D2302 users. Btw, can I ask you if D2305 is gonna be in the support list soon
Click to expand...
Click to collapse
Hoping every models will be on board soon!

Let's hope so too. Maybe annoying ppl won't show up here. And I was getting bored of stock rom anyway

vusun123 said:
Let's hope so too. Maybe annoying ppl won't show up here. And I was getting bored of stock rom anyway
Click to expand...
Click to collapse
Lol

7 hours use

Nice battery life. More expectations from the fully working ROM now @galaxyfreak I still keep track of your github commit, model detection script works now right ?

I think jerplea is not accepting it!

He said that AOSP only supports the single sim LTE model, he didn't say anything about modding it to fit other AOSP-based roms and such

@galaxyfreak is ART run fine on the M2 ? Any downside ?

[DISCUSSION] What Roms do you guys use and why?

Hey, guys.
This is not a BEST ROM THREAD. Just out of curiosity, I wanna know what ROMs you guys use and why? Also describe what kernels and mods you're using? It's just a fun little way to see what works for different people.

For example, I am using SlimKat with 907 MB RAM (thanks to @Android-Andi), Pure Performance X, L Speed and ViperFX. What are you guys using???

omnirom 4.4.4 official ..just for good performance and no lag.....

ashkineeeeee said:
omnirom 4.4.4 official ..just for good performance and no lag.....
Click to expand...
Click to collapse
Any mods flashed???

NO...just rom and opengapps
adityabanerjee1303 said:
Any mods flashed???
Click to expand...
Click to collapse

ashkineeeeee said:
Click to expand...
Click to collapse
You could try PurePerformance X and L-Speed to improve... well, performance, and you could try ViperFX to drastically improve your audio experience...

BrokenOS, i use this rom on my phone too, just love it. I also use A.R.I.S.E sound systems

I'm using Slim6 because I wanted a simple ROM, as I use my tablet mostly for web browsing and videos. It's the ROM which suits me the best.

I'm using the CM11 ROM by @Android-Andi because this ROM is the most stable ROM i've ever used ! Also Pokémon GO works well on it . :victory:

facoco said:
BrokenOS, i use this rom on my phone too, just love it. I also use A.R.I.S.E sound systems
Click to expand...
Click to collapse
Is it available for P3100? I couldn't find it. What version of android it is?

Logiel said:
I'm using the CM11 ROM by @Android-Andi because this ROM is the most stable ROM i've ever used ! Also Pokémon GO works well on it . :victory:
Click to expand...
Click to collapse
Great, but the latest CM builds by Andi (the unified ones) for espresso3g crash on setup. I've tried.

josfr4ncisco said:
I'm using Slim6 because I wanted a simple ROM, as I use my tablet mostly for web browsing and videos. It's the ROM which suits me the best.
Click to expand...
Click to collapse
Does Xposed and ViperFX work on it? Do you use a custom kernel? If not, what can I use? And also, do you have OC? And finally, does Pokemon GO work well on it? Sorry for so many questions....

Logiel said:
I'm using the CM11 ROM by @Android-Andi because this ROM is the most stable ROM i've ever used ! Also Pokémon GO works well on it . :victory:
Click to expand...
Click to collapse
Have you noticed that when you have the tab plugged in it shows that it's not charging? IE: If you pull the drop down menu down it says charging where the wifi/blue tooth icons are, but if you turn to the screen via the lock screen or go to battery in the menu it says "not charging"... This is the ONLY thing I find wrong with that rom otherwise I'd definitely run it.
I've tried so many thing and it still doesn't show charging even though IT IS charging..... Like this rom a ton but that's the only thing that is driving me nuts about it.
Looking forward to seeing if you have seen the same thing.
-Nigel

adityabanerjee1303 said:
Does Xposed and ViperFX work on it? Do you use a custom kernel? If not, what can I use? And also, do you have OC? And finally, does Pokemon GO work well on it? Sorry for so many questions....
Click to expand...
Click to collapse
Hi...in installed slim6 your question:
Yes..I'm install xposed and viperfx nice work.
Yes&no ...install custom kernel.. boot but not work propaly
Yes...pockemon go nice work...GPS and.....
---------- Post added at 07:10 PM ---------- Previous post was at 07:09 PM ----------
adityabanerjee1303 said:
Does Xposed and ViperFX work on it? Do you use a custom kernel? If not, what can I use? And also, do you have OC? And finally, does Pokemon GO work well on it? Sorry for so many questions....
Click to expand...
Click to collapse
Hi...in installed slim6 your question:
Yes..I'm install xposed and viperfx nice work.
Yes&no ...install custom kernel.. boot but not work propaly
Yes...pockemon go nice work...GPS and.....

ashkineeeeee said:
Hi...in installed slim6 your question:
Yes..I'm install xposed and viperfx nice work.
Yes&no ...install custom kernel.. boot but not work propaly
Yes...pockemon go nice work...GPS and.....
---------- Post added at 07:10 PM ---------- Previous post was at 07:09 PM ----------
Hi...in installed slim6 your question:
Yes..I'm install xposed and viperfx nice work.
Yes&no ...install custom kernel.. boot but not work propaly
Yes...pockemon go nice work...GPS and.....
Click to expand...
Click to collapse
Thanks for your reply!

adityabanerjee1303 said:
Is it available for P3100? I couldn't find it. What version of android it is?
Click to expand...
Click to collapse
I believe is for expressowifi only (3110). Android 6.0.1
Sent from my MotoG3 using XDA-Developers mobile app

NewShockerGuy said:
Have you noticed that when you have the tab plugged in it shows that it's not charging? IE: If you pull the drop down menu down it says charging where the wifi/blue tooth icons are, but if you turn to the screen via the lock screen or go to battery in the menu it says "not charging"... This is the ONLY thing I find wrong with that rom otherwise I'd definitely run it.
I've tried so many thing and it still doesn't show charging even though IT IS charging..... Like this rom a ton but that's the only thing that is driving me nuts about it.
Looking forward to seeing if you have seen the same thing.
-Nigel
Click to expand...
Click to collapse
Not especially... I've got no problem :laugh:

Logiel said:
Not especially... I've got no problem :laugh:
Click to expand...
Click to collapse
hmmm...
What is the exact cynogen rom you are running?
I want to dl the one you have and try it. Seems weird. I did a factory reset-clear cache delvak/ factor wipe.
Installed perfectly and the only gripe is when it's plugged in and you go to the battery menu it says "not charging" even though it is. Pull the drop down menu and the tiny icon shows that it's charging.
But if it's on the lock screen it doesn't show charging (even though it is)
-Nigel
---------- Post added at 04:10 PM ---------- Previous post was at 04:09 PM ----------
Logiel said:
Not especially... I've got no problem :laugh:
Click to expand...
Click to collapse
hmmm...
What is the exact cynogen rom you are running?
I want to dl the one you have and try it. Seems weird. I did a factory reset-clear cache delvak/ factor wipe.
Installed perfectly and the only gripe is when it's plugged in and you go to the battery menu it says "not charging" even though it is. Pull the drop down menu and the tiny icon shows that it's charging.
But if it's on the lock screen it doesn't show charging (even though it is)
-Nigel

NewShockerGuy said:
hmmm...
What is the exact cynogen rom you are running?
I want to dl the one you have and try it. Seems weird. I did a factory reset-clear cache delvak/ factor wipe.
Installed perfectly and the only gripe is when it's plugged in and you go to the battery menu it says "not charging" even though it is. Pull the drop down menu and the tiny icon shows that it's charging.
But if it's on the lock screen it doesn't show charging (even though it is)
-Nigel
---------- Post added at 04:10 PM ---------- Previous post was at 04:09 PM ----------
hmmm...
What is the exact cynogen rom you are running?
I want to dl the one you have and try it. Seems weird. I did a factory reset-clear cache delvak/ factor wipe.
Installed perfectly and the only gripe is when it's plugged in and you go to the battery menu it says "not charging" even though it is. Pull the drop down menu and the tiny icon shows that it's charging.
But if it's on the lock screen it doesn't show charging (even though it is)
-Nigel
Click to expand...
Click to collapse
maybe try another ac adapter

smart-t78 said:
maybe try another ac adapter
Click to expand...
Click to collapse
I've got two (both OEM), both give the same thing.
Soon as I wipe the rom, install SlimKat or anything else I plug it in and it says charging. Wipe it again, install CM11 and then get the "not charging" even though it is.
I'm going to fiddle with it tomorrow.
-Nigel

[ROM][LG Aristo 2/2+/K8+] AR.Oreo.Rooted.v6

Special thanks:
@tecknight for supplying the rooted boot.img, a root method for the Aristo 2, and for fixing up my Custom Rom. A lot of the credit really should go to him, because without his help my effort would have been useless. So again thank you tecknight.
---------------------------------------------------------------------
LG Aristo 2
Rooted/Zip-Aligned/De-Bloated/De-Odexed
AR.Oreo v6
---------------------------------------------------------------------​
Disclaimer:
I am not responsible for any soft brick, hard bricked, or even broken devices after installing. Flash at your own risk.​
Prerequisites:
Unlocked Boot-loader
Unofficial TWRP Recovery
Unlocking Bootloader and Installing TWRP Here.
Features:
Removed Metro Apps​Removed LG Apps​Zip-Aligned System Apps​Rooted with Magisk 17.3 Beta​Trubuchet 15.1(Replacement for LG Home, Easy Home, and Home and Apps Launcher)​(More features coming soon.)​
Atomic Rom v6
- Before you install remember to make a backup of your data and system partitions.
- Let's Start!
Power Off your phone​Press and hold Pwr + VolD and release the power button when the phone vibrates, then just as fast press it again and hold.​After the factory reset confirm shows up select yes both times to boot into TWRP.​When done press back and navigate to the directory with the Rom and flash it.​Reboot the System and Done!​
Update 3.13.19:
Add the link to v6. Sorry guys I didn't realize I was being a poor thread manager.
Update 11.19.2018:
Fixed flash error from "messed up" meta-file in v1 and v2
v2 flash does error 6
The wrong boot.img causes the device to boot loop
SystemUI, LGIMS, and Video Calls keep crashing until the device soft reboots.
Update 11.20.2018:
Fixed updater-script
No more Boot loops.
Nothing crashes upon boot
Update 11.26.18
Rom is almost finished!
Added link to TeckNight's Pre-Rooted Rom
No longer will matter what device you have.
You can visit TeckNight's variant of the rom and how to install it here - https://forum.xda-developers.com/showpost.php?p=78218056&postcount=130
Enjoy and don't forget to leave thanks if you appreciate TeckNight's work and mine![/SIZE]
Thread Rules:
If any questions be sure to ask respectfully.
No cussing
No spamming
XDA:DevDB Information
ARom, ROM for the LG K8 (2018)
Contributors
NonStickAtom785, tecknight
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: cv1
Based On: Stock
Version Information
Status: Testing
Current Stable Version: 1.0
Stable Release Date: 2018-11-30
Current Beta Version: v1
Beta Release Date: 2018-11-30
Created 2018-11-26
Last Updated 2019-06-13

Reserved

RESERVED

Awesome thanks for adding Google camera and google messages the default lg messages and calling apps are hideous
---------- Post added at 10:23 PM ---------- Previous post was at 10:21 PM ----------
I wish I was smart like you developers so I could create a custom overclock kernel

Isaah E said:
Awesome thanks for adding Google camera and google messages the default lg messages and calling apps are hideous
---------- Post added at 10:23 PM ---------- Previous post was at 10:21 PM ----------
I wish I was smart like you developers so I could create a custom overclock kernel
Click to expand...
Click to collapse
It's not to hard. I just take in a lot that I read from other forums. I'm not as experienced as others but I've been learning on the way.
I can try to change the calling app, I did it once. Do you have any suggestions as to what app I should use to replace the call app? And would you like some more features to be added. I'm lacking on some idea's. I'm already looking at adding Substrantum, Audio FX, Eleven Music, and a CPU Controller. "Those will be in the next Update, along with a new boot animation."

Thank you for the work you've put in! I just wanted to report that I crash when I try to click Home Screen in the Settings under the display tab. Also, would it be possible for you to post the vendor files or what ever you used to compile the rom. That would be extremely helpful.

NonStickAtom785 said:
It's not to hard. I just take in a lot that I read from other forums. I'm not as experienced as others but I've been learning on the way.
I can try to change the calling app, I did it once. Do you have any suggestions as to what app I should use to replace the call app? And would you like some more features to be added. I'm lacking on some idea's. I'm already looking at adding Substrantum, Audio FX, Eleven Music, and a CPU Controller. "Those will be in the next Update, along with a new boot animation."
Click to expand...
Click to collapse
This XDA Forum has google phone v26 with dark mode support that would be a good phone app
https://forum.xda-developers.com/an...292-bubble-t3708218/post74588791#post74588791

jmanc3 said:
Thank you for the work you've put in! I just wanted to report that I crash when I try to click Home Screen in the Settings under the display tab. Also, would it be possible for you to post the vendor files or what ever you used to compile the rom. That would be extremely helpful.
Click to expand...
Click to collapse
I used the Stock rom to make this Rom. So essentially it's just a Custom Stock Rom with replaced Apps.

Isaah E said:
This XDA Forum has google phone v26 with dark mode support that would be a good phone app
https://forum.xda-developers.com/an...292-bubble-t3708218/post74588791#post74588791
Click to expand...
Click to collapse
Hey have you had any updates on the keep. I can pull it from the boot I'm for you if you'd like.
And also have you flashed the new update? I add a couple more things and removed some more. I'm stuck unless I can get some more suggestions from everyone.
Sent from my LGE LM-X210(G) using XDA Labs

NonStickAtom785 said:
Hey have you had any updates on the keep. I can pull it from the boot I'm for you if you'd like.
And also have you flashed the new update? I add a couple more things and removed some more. I'm stuck unless I can get some more suggestions from everyone.
Click to expand...
Click to collapse
Yea I flashed the new update but what do you mean by the keep

Isaah E said:
Yea I flashed the new update but what do you mean by the keep
Click to expand...
Click to collapse
I hate auto correct so much. I meant to say do you have any updates on the kernel. And lower down I meant to say do you still need the zimage.
I'm about to update the ROM again. It will boot faster and have better battery and charger speed.
Sent from my LGE LM-X210(G) using XDA Labs

I'm about to change the ROM's build.prop to fit the ROM. Can I get some volunteers to help me edit the settings app.

Thank you for this custom ROM and TWRP! I tested this (and still using as a daily driver) and can confirm working on the LG Phoenix 4 AT&T unlocked bootloader. With Magisk 18.0 I wouldn't recommend you update till a later version is released due to force close errors, but is rare with bash installed to /system. This ROM is very clean and I'm impressed and big thanks to the developer I've been looking for a way to root my Phoenix 4 and have a debloated rom
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
NonStickAtom785 said:
I'm about to change the ROM's build.prop to fit the ROM. Can I get some volunteers to help me edit the settings app.
Click to expand...
Click to collapse
I'm in!!! Wednesday I'll have my new PC so I can create a new settings app

AustinGarrick1818 said:
Thank you for this custom ROM and TWRP! I tested this (and still using as a daily driver) and can confirm working on the LG Phoenix 4 AT&T unlocked bootloader. With Magisk 18.0 I wouldn't recommend you update till a later version is released due to force close errors, but is rare with bash installed to /system. This ROM is very clean and I'm impressed and big thanks to the developer I've been looking for a way to root my Phoenix 4 and have a debloated rom
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
I'm in!!! Wednesday I'll have my new PC so I can create a new settings app
Click to expand...
Click to collapse
Awesome!!! I'm amazed that my ROM worked for the Phoenix 4. It was originally for the Aristo 2. What kind of firmware are you running? Also I'm about to release an Oreo Version of the ROM. Would you mind pre-testing it?

NonStickAtom785 said:
Awesome!!! I'm amazed that my ROM worked for the Phoenix 4. It was originally for the Aristo 2. What kind of firmware are you running? Also I'm about to release an Oreo Version of the ROM. Would you mind pre-testing it?
Click to expand...
Click to collapse
I would love to pre-test your rom! I'm on 7.1.2 as the Phoenix 4 was before this rom. No one has even found root or TWRP that works for this device yet so I feel good knowing this rom works
---------- Post added at 04:18 PM ---------- Previous post was at 04:17 PM ----------
NonStickAtom785 said:
Awesome!!! I'm amazed that my ROM worked for the Phoenix 4. It was originally for the Aristo 2. What kind of firmware are you running? Also I'm about to release an Oreo Version of the ROM. Would you mind pre-testing it?
Click to expand...
Click to collapse
Oh and TWRP too

AustinGarrick1818 said:
I would love to pre-test your rom! I'm on 7.1.2 as the Phoenix 4 was before this rom. No one has even found root or TWRP that works for this device yet so I feel good knowing this rom works
---------- Post added at 04:18 PM ---------- Previous post was at 04:17 PM ----------
Oh and TWRP too
Click to expand...
Click to collapse
I'd feel good to! Your the first one ever to root that phone. So if Aristo 2 firmware worked then the TWRP with the Oreo Kernel should work for you to. I'll post the link in a sec.

NonStickAtom785 said:
I'd feel good to! Your the first one ever to root that phone. So if Aristo 2 firmware worked then the TWRP with the Oreo Kernel should work for you to. I'll post the link in a sec.
Click to expand...
Click to collapse
Sounds good! I can't start a new thread or seem to figure it out so if your able to start one and mention me for finding the root method?

AustinGarrick1818 said:
Sounds good! I can't start a new thread or seem to figure it out so if your able to start one and mention me for finding the root method?
Click to expand...
Click to collapse
I forgot about that. Your a junior member so they wont let you post. But I make a more advanced ROOT method and post it for you and mention you.

NonStickAtom785 said:
I forgot about that. Your a junior member so they wont let you post. But I make a more advanced ROOT method and post it for you and mention you.
Click to expand...
Click to collapse
I would appreciate that so much!!! Thank you again!!

AustinGarrick1818 said:
I would appreciate that so much!!! Thank you again!!
Click to expand...
Click to collapse
Download this ROM. I havnt updated my links. But this is a little update. Not the Oreo Update.
https://androidfilehost.com/?fid=11410963190603874603