Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance
It has started for about 2 weeks now. The phone pops up a message saying for me to save and that if I want to save before I turn off. If I try to turn off the screen, the top button wont react. I have to press twice to get it off, then it comes back on and it gives me the same message. I have to soft reset it to get it working again.
I also did a ROM update and that reset it everything, but then it started doing it again.
It is hardware right?
So this is becoming very annoying this ****e keeps popping up and its draining the ****e of my battery. Anyone has had this problem.
I don't really have a solution for this, but I had the same and also was thinking it's hardware related...
I tried opening up the phone and cleaning it out, first with no noticeable effect (except I broke my speaker wires, be carefull with that if you ever decide to open up your phone), but it seems like something went right, because I only rarely have that problem now ...
One theory I had was that water might have sipped in the button or something, so I'm leaving it out the bathroom when I'm taking showers now.
Anyway, if anyone else has had this problem and did something about it, I'm also very interested to know...
Actually to me, it sounds like some app has gone rogue. Have you installed or modded anything after you flashed the updated ROM? I would suggest if you have anything of importance, that you save/backup that information before performing a hard reset as this will reset everything back to stock for the ROM that you are using. I am using the ROM in my sig/signature and I am not experiencing any of the issues you are describing. It is a custom/cooked ROM so you will need to have HARD-SPL'd your device before you flash. Also, there is a CDMA version on PPCGeeks if you have that type of device.
n-Joie! (Enjoy)
Hey guys. Starting yesterday, I began having an issue with the power button of my DS. At first, it didn't want to work at all (didn't respond to presses), then it "drowned" almost into the phone's body (I could barely press it), and then it began doing thing by itself!
It seems that there's something wrong with either button's contacts inside, or maybe some parts of the pressure mechanism broke, because it started to access the power menu by itself, one time after another, which made the usage almos impossible, and then it went crazy with locking the phone (as if you would press the button once), and wouldn't let the DS to sleep, as the button is "being pressed" all the time.
A few hours later it started to work properly as it should (no "going crazy" stuff), but this morning - the problem appeared again.
I really don't what to do, because I don't have anything tight enough to stick behind the button and raise it a little. What should I do?
P.S. I'm not going to disassemble/reassemble it, 'cause I need a phone lol
I don't understand, you seem to describe a physical problem (the button "drowning" in the case, that's not correct behavior !!) but you don't want to disassemble your phone. I can only advise you to take it to a repair center as it will not be solved by software...
Hey i have a Nexus S with the same problem! I was wondering if there is a way to disable it all together (software-wise).?.?
Known issue that can happen to our lovely device, my wife's device currently had the same problem, don't let your battery run out our you may not be able to restart your phone, I'd suggest that you install a sweep to wake kernel and consider a visit to the service Centre, especially if your still covered by warranty
Sywepd form my DsereiS
This is kind of a last resort - to see if anyone has any experience with this problem. I have Googled around for similar problems and haven't quite found the same issue anywhere.
OK, so let me emphasise, this is not a bootloop - there is clearly some kind of hardware or firmware problem where the phone is interpreting the power button as being pressed.
I can power on, and the phone will get to various points before then rebooting, as though the power button were being held down:
- often it only gets to the splash screen and then reboots
- sometimes I can get it into recovery, but whatever option I happen to highlight (I have about a second or two to do so) just gets selected as though the power button were pressed
- sometimes the phone will even boot and can be used for a little while (enough even for me to back up the files off it), but sooner or later a message will pop up saying something along the lines of "Continue holding power button to reset", again - OBVIOUSLY the system thinks the power button is pressed down.
The problem happened while the phone was under guarantee, the repair place kept it for weeks, eventually "replaced the motherboard" (so they say) and it seemed to work for a time. Now the problem is back and there is no more warranty. A reputable repair place has had a look and said they can't do anything.
I have tried taking the top cover off and fiddling with the microswitch (only thing I could think of) to see if there is anything obvious going on there, but that doesn't seem to be the cause of the problem.
Any ideas, before we ditch the phone as a $XXX loss?
Just to update - I managed to catch the phone when it wasn't going crazy, go into fastboot and flash CM10.2. Could've restored to stock I suppose, but I am concerned that may somehow have been the cause of the problem in the first place.
As of 12 hours later the phone is behaving itself. Can't be sure a new ROM is what did it, but fingers crossed...
Hey guys,
strange and frustrating problem. I was using my phone pretty extensively today (although nothing crazy), mostly thanks to Pokemon Go. Tonight after using my phone normally, I went to press the power button to turn the screen off and nothing happened. I was able to reboot (by changing one of the long-press actions to bring up the power menu via GravityBox) and then was unable to power on the phone. It seems like my hardware power button has suddenly become unresponsive. This leaves me unable to power on/off the phone, including booting into the bootloader. Also, I seem to be unable to wake my phone up by double tapping the screen or swiping up.
The phone otherwise functions fine. If I get a notification, the screen wakes up and I can use the phone. Otherwise, the only way I've been able to get into the phone is by connecting it to a computer and issuing ADB commands. The IR blaster functions fine which makes me think it's not the hardware button?
Has this happened to anyone else before? Can the power button just break like that without any water / physical damage? The fact that I also can't wake the screen makes me think it's a software issue. One other thing I suspect is that my phone abruptly died yesterday (battery died despite software thinking it still had juice left). In the past, with the modified kernel / rom, this has resulted in some nasty issues, including 4G not working and the Android system process basically exploding. I thought I lucked out when I powered it on after that, but maybe it just took a day for this issue to manifest itself.
I'm going to make a NANDROID backup and try flashing a few different things to see if I can fix it. I'll post my progress here.
Current build:
- Verizon M8, S-OFF
- TWRP
- Android GPE 6.0 (MRA58K.H13)
Edit: I haven't been able to find a fix. I'm a bit afraid to try a full RUU since I can't use the hardware keys to reboot into the bootloader should something go wrong. It may just be that my PWR hardware button is f'd which really sucks. I'm not sure I'm up to cracking open the phone to fix it. In the meantime I downloaded an app called Gravity Screen On/Off which uses the phone's proximity sensor to wake the screen up and it seems to work ok for now.