I've been having an issue with all 4.2.2 roms where if I either make a phone call or receive one my screen will go off, and none of the buttons will work during the phone call. I cant even hang up. I would have to wait for the other person to hang before I can use my phone again. I've tried 3 different 4.2.2 rom and I have the same same problem with all of them. With 4.1.2 I don't have those issues. I used the stock JB radio and kernel. Any ideas? Thanks in advanced.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
1. Search and read
2. Install the UCMCM1 radio
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
rpr69 said:
1. Search and read
2. Install the UCMCM1 radio
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
OK, I've searched the whole forum for anything related to UCMCM1 and only got two hits; this post and another that briefly mentions UCMCM1. Im assuming that UCMCM1 and UCMC1 are not the same. Would you know where I can download UCMCM1? Thank you for your help.
its the same it was a typo, its ucmc1
Nixdawg1 said:
OK, I've searched the whole forum for anything related to UCMCM1 and only got two hits; this post and another that briefly mentions UCMCM1. Im assuming that UCMCM1 and UCMC1 are not the same. Would you know where I can download UCMCM1? Thank you for your help.
Click to expand...
Click to collapse
Its ucmc1 and you can find it in the dev section and its probably linked elsewhere I'm not going to link because you need to work on those search skills.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
mtdew said:
Its ucmc1 and you can find it in the dev section and its probably linked elsewhere I'm not going to link because you need to work on those search skills.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
vincom said:
its the same it was a typo, its ucmc1
Click to expand...
Click to collapse
In that case yes, I am using UCMC1 when installing 4.2.2 roms and still experiencing the same problems.
Nixdawg1 said:
In that case yes, I am using UCMC1 when installing 4.2.2 roms and still experiencing the same problems.
Click to expand...
Click to collapse
Sorry, yes I meant UCMC1, I was typing from memory. I am confused then because you said you used the stock JB radio, which I don't believe is UCMC1. In that case, you may have an APN problem, what carrier are you with?
rpr69 said:
Sorry, yes I meant UCMC1, I was typing from memory. I am confused then because you said you used the stock JB radio, which I don't believe is UCMC1. In that case, you may have an APN problem, what carrier are you with?
Click to expand...
Click to collapse
Sorry for the confusion, Im with AT&T.
Hrm. I'm out of ideas now, I don't think I've heard of this problem before.
att's stock jb radio is ucmc1, perform a full wipe then go back to stock 4.1.2, install twrp then wipe then flash 4.22
Related
Just got myself a G2X, I rooted it everything is working fine EXCEPT WiFi Calling, it just says "enabling" has anyone heard of a fix for this yet?
I have the stock rom but I am rooted. I haven't flashed the new CM9 yet but want to get this thing working on the stock rom I have.. I read someone mentioned something about grabbing an old sim card? I have had zero luck finding one.
Is there a fix for this? any flashable solution? thanks.
dannynyc said:
Just got myself a G2X, I rooted it everything is working fine EXCEPT WiFi Calling, it just says "enabling" has anyone heard of a fix for this yet?
I have the stock rom but I am rooted. I haven't flashed the new CM9 yet but want to get this thing working on the stock rom I have.. I read someone mentioned something about grabbing an old sim card? I have had zero luck finding one.
Is there a fix for this? any flashable solution? thanks.
Click to expand...
Click to collapse
People will help if you post in the correct place, this is development. Mods please delete before the flaming begins
Sent from my LG-P999 using xda premium
this is in the completely wrong section but just use titanium backup and uninstall wifi calling. unless you actually use it..
The new 21y firmware appears to fix All the problems that I had before....so I'd suggest updating if that is possible
Sent from my LG-P999 using XDA
arvonn said:
The new 21y firmware appears to fix All the problems that I had before....so I'd suggest updating if that is possible
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
Where can I find the 21y firmware?
Sorry about posting in wrong forum, figured I needed to have rooted phone in order to flash a fix..
Wrong section
nitrogen618 said:
Wrong section
Click to expand...
Click to collapse
No **** Sherlock.
Sent from Narnia
dannynyc said:
Where can I find the 21y firmware?
Sorry about posting in wrong forum, figured I needed to have rooted phone in order to flash a fix..
Click to expand...
Click to collapse
Search, and ye shall be informed. EVERYTHING you need answered has already been posted in the forums. Look and read, then read some more. If you run in to any problems... read some more.
Is this the JB modem or something else? I'm not sure if should i install it with the jelly bean leak.
Sent from my SCH-I535 using Tapatalk 2
Seems like it. I flashed the one from invisiblek's modem thread with the filename VRLI5.modem.zip and it's working fine for me.
EDIT: Never mind, that's not the modem. According to this post it seems to be related to power management. I never flashed it, unless it was included with the modem zip.
SilentDude56k said:
Seems like it. I flashed the one from invisiblek's modem thread with the filename VRLI5.modem.zip and it's working fine for me.
EDIT: Never mind, that's not the modem. According to this post it seems to be related to power management. I never flashed it, unless it was included with the modem zip.
Click to expand...
Click to collapse
Here is the flashable VRL15 modem... Now can someone make this Odin flashable??
http://rootzwiki.com/topic/34053-of...zon-sgs3-sch-i535-odin-or-recovery-flashable/
edthesped said:
Is this the JB modem or something else? I'm not sure if should i install it with the jelly bean leak.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
YEs it is . use the link that i posted to take you to rootzwiki and download it there.
what is this talk of .RPM on touchwiz jellybean? i have searched and found little info... sorry op not trying to hijack your thread!
Here's a couple posts I found earlier today about rpm:
http://forum.xda-developers.com/showpost.php?p=33187381&postcount=4155
and this latter one is more descriptive about what changes with OTA's and apparently only the rpm is of consequence...
http://forum.xda-developers.com/showpost.php?p=32538851&postcount=3532
and finalement, here's a post with the JB leak's rpm:
http://forum.xda-developers.com/showpost.php?p=33557322&postcount=260
Now I still don't know what this does other than exist.
yea im trying to figure out its purpose and if i need to add it too my guide. thx for those links!
droidstyle said:
yea im trying to figure out its purpose and if i need to add it too my guide. thx for those links!
Click to expand...
Click to collapse
I'm still new to Samsung, so someone correct me if I'm way off-base, but the gist I got was that when a new rom (or leak) comes from verizon, it includes rom+kernel+rpm+modem... which on an HTC device we called rom+kernel+firmware+radio. So my understanding is that if you just flash the new radios without the new firmware that matches up with what your dev used as a base, there could be compatibility issues.
(Much more knowledgeable people discussed this in the Cleanrom thread as in those links above).
i understand all of that...just trying to figure out what exactly is rpm. thx !
droidstyle said:
i understand all of that...just trying to figure out what exactly is rpm. thx !
Click to expand...
Click to collapse
+1 I don't like to blindly flash...
Sent from my SCH-I535 using Tapatalk 2
In simple terms if I understand correctly it installs files that you don't get in flashing a ROM. Gives you an option if you don't want to go back to stock via Odin and OTA back up to current version.
sfobrien said:
In simple terms if I understand correctly it installs files that you don't get in flashing a ROM. Gives you an option if you don't want to go back to stock via Odin and OTA back up to current version.
Click to expand...
Click to collapse
i understand that...lol
whats its purpose in android is my question?
droidstyle said:
i understand that...lol
whats its purpose in android is my question?
Click to expand...
Click to collapse
RIL files and Power Managment files to coincide with ROM and Modem version to avoid possible conflicts and issues?
sfobrien said:
RIL files and Power Managment files to coincide with ROM and Modem version to avoid possible conflicts and issues?
Click to expand...
Click to collapse
ahh ok now were getting somewhere! thx!!
So does an odin back to stock undo whatever this file does or does another rpm file need to be flashed to undo it?
edthesped said:
So does an odin back to stock undo whatever this file does or does another rpm file need to be flashed to undo it?
Click to expand...
Click to collapse
If you Odin to a prior version of stock, it should be included in the zip which simultaneously changes the modem. The reason an rpm is being discussed is because when flashing custom roms and modems, this isn't updated. Think of an Odin flash of older images as "reversing an update," all those same files are added when you accept an OTA, so they'll be changed if you Odin an older stock image.
If I'm wrong, I'll gladly redact my comment but that's what I understand from this discussion.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
If you Odin to a prior version of stock, it should be included in the zip which simultaneously changes the modem. The reason an rpm is being discussed is because when flashing custom roms and modems, this isn't updated. Think of an Odin flash of older images as "reversing an update," all those same files are added when you accept an OTA, so they'll be changed if you Odin an older stock image.
If I'm wrong, I'll gladly redact my comment but that's what I understand from this discussion.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks, it's starting to make more sense to me. I'm not unfamiliar with root but typically only do so to eliminate bloat, otherwise I'm happy with stock builds. The JB leak changed things a little so I want to get a better handle on what I'm installing and why.
stable
Why can't this just be simple.....I just want a good stable everything and then leave it alone.....Will that ever happen?
masonjb said:
Why can't this just be simple.....I just want a good stable everything and then leave it alone.....Will that ever happen?
Click to expand...
Click to collapse
flash back to stock and leave your device alone...pretty simple.
So if we revert to a ROM backup, do we need to manually turn back the rpm as well, like we do with the modem? Sounds like we need vrali5 for jb leak. I will play around with jb for awhile though go back to ICS for everyday stability use, until I find a jb I like. Do I need to revert the rpm when I restore ICS? Where do I find older rpms. Thanks.
Sent from my SCH-I535 using Tapatalk 2
I recently flashed to Vincom's SUPERLITE CM10 JB4.1.2 RoM | V8.0.
Ive gotten things up and running pretty well, but there is one major issue I seem to be having. My phone is not consistently able to connect to data on AT&T. I am frequently losing my data connections in locations where I have always had them in the past.
I searched around on his developer thread but didnt see an answer. I saw a reference to APNs for AT&T, but his note says these should now be included in the ROM I flashed, so Im not sure if I am missing something.
Anyone know if this is a common problem or how I can troubleshoot it and get up and running again?
Thanks.
Haven't heard of this being a problem. What modem (baseband) are you on? You can find it in settins, about phone.
Also, in settings wireless, more, mobile networks, Check that the access point name is on att LTE
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Haven't heard of this being a problem. What modem (baseband) are you on? You can find it in settins, about phone.
Also, in settings wireless, more, mobile networks, Check that the access point name is on att LTE
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Its gotten worse. Ive spent the last 5 hours with almost zero data access.
I see baseband version i727UCLI3.
Access Point name was was set to ATT wap,cingular. I switched it to ATT LTE (pta)...should this fix it? Any idea why this would have happened? Will I need to keep checking this or was it just something from the ROM flash?
flash the ucli3 radio again or try another ics radio
which recovery are you on
vincom said:
flash the ucli3 radio again or try another ics radio
which recovery are you on
Click to expand...
Click to collapse
I am using TWRP for recovery if that is what you mean?
I will search around for how to locate and flash a radio...does it matter which I use or any ICS radio should be OK?
Read vincom's stickies in the development forum. You'll find everything you need there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
lol. it just happened to me when testing a custom kernel, seems to be a prob when doing so, i just restarted and it worked
vincom said:
lol. it just happened to me when testing a custom kernel, seems to be a prob when doing so, i just restarted and it worked
Click to expand...
Click to collapse
Super. Glad I dont need to reflash a radio. Although I will let you know if it happens again (and will flash a new radio to test)
lirong said:
Super. Glad I dont need to reflash a radio. Although I will let you know if it happens again (and will flash a new radio to test)
Click to expand...
Click to collapse
reflashing radio is the simplest things todo on our phones, no harm will come of it and sometimes beneficial as cwm/twrp wiping and flashing roms dont touch that parition
HI!
Can someone tell me how can i change the option (WCDMA preffered)? because i did change somes modems and nothing. The problem is when i flash my skyrocket with any Cyanogen mod rom or these derivates i want change that option to WCDMA/GSM/LTE but i cant and in the top appear HSPA . When i flash my skyrocket with the Samsung leak custom rom, everything run NICE, 4G appear and UXUMA7 or UCLL3 modem run NICE, but my problem persist when i flash to a CM rom.
Please help!
just dial *#2263# or *#*#4636#*#*
juancollado2003 said:
just dial *#2263# or *#*#4636#*#*
Click to expand...
Click to collapse
Thanks my bro!:fingers-crossed:
Someone have any other sugesstion?
thanks
juancollado2003 said:
just dial *#2263# or *#*#4636#*#*
Click to expand...
Click to collapse
youre a genius thank you
I need a link with a list of radios for use with all CM roms because the UXUMA7 or UCLL3 only work with Samsung stock leak rom. Someone help me?
wilsonmd said:
I need a link with a list of radios for use with all CM roms because the UXUMA7 or UCLL3 only work with Samsung stock leak rom. Someone help me?
Click to expand...
Click to collapse
There's is a sticky by vincom that has all the radios. Help yourself to it.
Sent from my SAMSUNG-SGH-I727 using xda premium
hi! and thanks for reply me but!
ctalcant said:
There's is a sticky by vincom that has all the radios. Help yourself to it.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
the vincom post abot radios need upgrade!!
wilsonmd said:
the vincom post abot radios need upgrade!!
Click to expand...
Click to collapse
No it doesn't what are you talking about.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
wilsonmd said:
the vincom post abot radios need upgrade!!
Click to expand...
Click to collapse
Brain damage
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Similar issue
I have tried flashing like 5 different modems while on CM 10.0. In the philly area (if that helps). They all seem to work GREAT for like a day or two and then start to go downhill. I know my office doesn't have great reception, but seems like once it looses signal there are a lot of times it won't pick back up until i put it in airplane mode. On I727UCLF6 right now. Also been noticing sometimes it will look like i have signal but no data goes through until i reboot. Tried to dial *#2263# or *#*#4636#*#*, first one got an error (connection problem or invalid MMI code) second one just went to att this number is invalid message. any suggestions welcome thanks!
As can be gleaned from the thread title, I install the latest Synergy ROM (484) and my camera app crashes as well as GPS failing to lock on. I have tried different camera apps and using GPS Status. Does anyone know of a fix, as I've tried searching through the 3000 page forum? LOL
Thanks in advance for any help
I just rewiped and flashed and now my GPS is working, but camera is still broken. :'(
Flash a different kernel. Like kt747 tw version.
Sent from my SCH-I535 using Tapatalk 2
hybridxer0 said:
I just rewiped and flashed and now my GPS is working, but camera is still broken. :'(
Click to expand...
Click to collapse
Doubt if anyone has a fix because the ROM is not broken. I've used the last 3 builds and never had a problem. Download fresh and wipe and try again. I recommend starting with the included stock kernel. and oh yes, make sure you are on the correct modem firmware wince the ROM does not install that.
Bad download? Try downloading again.
Sent from my SCH-I535 using Tapatalk 4 Beta
Did you superwipe? Flash any firmware update?
Firmware is key. Not all roms have been rebased to match the newest. Make sure you flash the firmware with .Tz file. Seen pages of people with camera problems on synergy because of this.
Sent from my SCH-I535 using xda premium
blueb0x said:
Did you superwipe? Flash any firmware update?
Firmware is key. Not all roms have been rebased to match the newest. Make sure you flash the firmware with .Tz file. Seen pages of people with camera problems on synergy because of this.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
MF1ModemandBootchainwithMb1TZ.zip is what I flashed. No bueno.
tpike said:
Bad download? Try downloading again.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
file checker verified twice.
DigitalMD said:
Doubt if anyone has a fix because the ROM is not broken. I've used the last 3 builds and never had a problem. Download fresh and wipe and try again. I recommend starting with the included stock kernel. and oh yes, make sure you are on the correct modem firmware wince the ROM does not install that.
Click to expand...
Click to collapse
I'm sorry if I implied the ROM was at fault, perhaps I am missing some step, but I did just now do a complete wipe (3x), re-downloaded the ROM and firmware, and it seems the only problem MY phone has is the Camera
hybridxer0 said:
I'm sorry if I implied the ROM was at fault, perhaps I am missing some step, but I did just now do a complete wipe (3x), re-downloaded the ROM and firmware, and it seems the only problem MY phone has is the Camera
Click to expand...
Click to collapse
I'd suggest you flash the VRBMB1 firmware.
call elegoil
SlimSnoopOS said:
I'd suggest you flash the VRBMB1 firmware.
Click to expand...
Click to collapse
Tried that. *Sigh* I think I am going to go to a different ROM, not having the Camera work is a dealbreaker. Whether it's ignorance on my part, or lack of documented resolutions for this problem that I have seen others have, I can't go this long without it.
Maybe flashing another ROM and coming back at a later time may solve the issue.
hybridxer0 said:
Tried that. *Sigh* I think I am going to go to a different ROM, not having the Camera work is a dealbreaker. Whether it's ignorance on my part, or lack of documented resolutions for this problem that I have seen others have, I can't go this long without it.
Maybe flashing another ROM and coming back at a later time may solve the issue.
Click to expand...
Click to collapse
I had the same problem and I fixed it by flashing a different kernel. I used the kt47 kernel and Now everything works.
Good luck
Peace
tylerlawhon said:
Flash a different kernel. Like kt747 tw version.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
OP, try this if you havent been done with this problem already. its 4am for me right now and I'm tired as balls and was at my wits end but then after flashing god knows how many different options hoping the camera would magically come back...i flash the kt747 tw kernel and its all gravy now. I dont understand how. I dont want or need to understand how. I am thankful! :good: