HI!
Can someone tell me how can i change the option (WCDMA preffered)? because i did change somes modems and nothing. The problem is when i flash my skyrocket with any Cyanogen mod rom or these derivates i want change that option to WCDMA/GSM/LTE but i cant and in the top appear HSPA . When i flash my skyrocket with the Samsung leak custom rom, everything run NICE, 4G appear and UXUMA7 or UCLL3 modem run NICE, but my problem persist when i flash to a CM rom.
Please help!
just dial *#2263# or *#*#4636#*#*
juancollado2003 said:
just dial *#2263# or *#*#4636#*#*
Click to expand...
Click to collapse
Thanks my bro!:fingers-crossed:
Someone have any other sugesstion?
thanks
juancollado2003 said:
just dial *#2263# or *#*#4636#*#*
Click to expand...
Click to collapse
youre a genius thank you
I need a link with a list of radios for use with all CM roms because the UXUMA7 or UCLL3 only work with Samsung stock leak rom. Someone help me?
wilsonmd said:
I need a link with a list of radios for use with all CM roms because the UXUMA7 or UCLL3 only work with Samsung stock leak rom. Someone help me?
Click to expand...
Click to collapse
There's is a sticky by vincom that has all the radios. Help yourself to it.
Sent from my SAMSUNG-SGH-I727 using xda premium
hi! and thanks for reply me but!
ctalcant said:
There's is a sticky by vincom that has all the radios. Help yourself to it.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
the vincom post abot radios need upgrade!!
wilsonmd said:
the vincom post abot radios need upgrade!!
Click to expand...
Click to collapse
No it doesn't what are you talking about.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
wilsonmd said:
the vincom post abot radios need upgrade!!
Click to expand...
Click to collapse
Brain damage
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Similar issue
I have tried flashing like 5 different modems while on CM 10.0. In the philly area (if that helps). They all seem to work GREAT for like a day or two and then start to go downhill. I know my office doesn't have great reception, but seems like once it looses signal there are a lot of times it won't pick back up until i put it in airplane mode. On I727UCLF6 right now. Also been noticing sometimes it will look like i have signal but no data goes through until i reboot. Tried to dial *#2263# or *#*#4636#*#*, first one got an error (connection problem or invalid MMI code) second one just went to att this number is invalid message. any suggestions welcome thanks!
Related
i just picked up a rooted and unlocked skyrocket. now i have been reading a lot of the how to's and other mods for the phone. to clarify though i can run any t989 rom or any i 727 skyrocket rom on the phone? also all i need to do is flash the tmobile radio pack for 3/4 g on tmobile?
i wont do anything until i get confirmation. no need to brick my shiny new white skyrocket lol.
any other tips ideas would be helpful and awesome!!!
I'm pretty sure you should only flash at&t from if you have at&t, and T-Mobile if you have T-Mobile. The carrier settings usually come with the rom, so if you have at&t and flash a T-Mobile you probably won't get any connectivity.
Just my thought, but I'm no dev. Do a search on the forums.
Sent from my SAMSUNG-SGH-I727 using xda premium
mahausrath said:
I'm pretty sure you should only flash at&t from if you have at&t, and T-Mobile if you have T-Mobile. The carrier settings usually come with the rom, so if you have at&t and flash a T-Mobile you probably won't get any connectivity.
Just my thought, but I'm no dev. Do a search on the forums.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
i was assuming this. just want to confirm. anyone else have any knowledge on this?
Wrong. U can use most tmobiel t989 roms on the skyrocket. Do some reading all the info u need is available. And easily found
silver03wrx said:
Wrong. U can use most tmobiel t989 roms on the skyrocket. Do some reading all the info u need is available. And easily found
Click to expand...
Click to collapse
ok so i flash a att rom. do i still need to do the tmobile radio with each flash? also a new kernel with each flash?
Dev section
http://forum.xda-developers.com/showthread.php?t=1507825
silver03wrx said:
Lol took me 5 seconds to find this
http://forum.xda-developers.com/showthread.php?t=1507825
Click to expand...
Click to collapse
thanks for your help. know about flashing the radio. im wondering more about the roms and kernel info more. i do appreciate your help.
Yes u can use t989 roms. U just need to use a skyrocket kernel. Or the auto rotation. Will not work properly
silver03wrx said:
Yes u can use t989 roms. U just need to use a skyrocket kernel. Or the auto rotation. Will not work properly
Click to expand...
Click to collapse
could i use a stock rom or would you suggest something like http://forum.xda-developers.com/showthread.php?t=1380682
Yeah that's a good kernel. That's probably your best choice for a gingerbread rom...
Ics roms only have 2 kernels. Romracer and mohave
silver03wrx said:
Yeah that's a good kernel. That's probably your best choice for a gingerbread rom...
Ics roms only have 2 kernels. Romracer and mohave
Click to expand...
Click to collapse
thanks. i ask so much cause i just get so nervous i will have a fancy paper weight. lol
just use. Cwm touch recovery. It is much better then previous versions.
Do a nandroid backup before.
And as long as u stay in the skyrocket and t989 section you'll be fine.
Almost all people brick. Doing thing they shouldn't. Or flashing stuff from a diff device.
The t989 is almost identical to our device
silver03wrx said:
Yeah that's a good kernel. That's probably your best choice for a gingerbread rom...
Ics roms only have 2 kernels. Romracer and mohave
Click to expand...
Click to collapse
I tried searching for mohave. But can't find it using the phone app... What is this kernel you speak of and what are the differences between rom racers?
Sent from my SAMSUNG-SGH-I727 using xda premium
Oppsie I mean mohan kernel
And Its in dev section
not really finding a radio that gets decent speed. used all 3 on the posted page. what about the uvkl1 anyone have a download on that?
kdm212 said:
not really finding a radio that gets decent speed. used all 3 on the posted page. what about the uvkl1 anyone have a download on that?
Click to expand...
Click to collapse
Use ucla3
icenight89 said:
Use ucla3
Click to expand...
Click to collapse
I swear that my speeds were best when on cm7 i got 53 down and 30 up... But on stock roms ucla3 ROM, kernel and radio is the way to go
Sent from my SAMSUNG-SGH-I727 using xda premium
icenight89 said:
Use ucla3
Click to expand...
Click to collapse
got a link?
http://www.theandroidcollective.org/i727/SilverRom/SILVER_MODEM_LA3.zip
Here my ucla3 modem
silver03wrx said:
http://www.theandroidcollective.org/i727/SilverRom/SILVER_MODEM_LA3.zip
Here my ucla3 modem
Click to expand...
Click to collapse
did not pick up any signal at all with that radio. thanks for the help though.
Ok so i have an AT&T Skyrocket, rooted but other wise stock on t-mobile. The edge speeds are killing after a few days, I can't get another phone at this time and my skyrocket is in perfect shape. The phone is rooted but otherwise stock on GB, of all the threads I searched, none speak about using a stock ROM and kernal with a different radio? I am wary of bricking my phone and had asked for help from some one local but that was a no go. So I am going to try and flash the radio myself, if I can find one that works nicely with stock ROM and kernal?? I have read of people using the Blaze radio and the UVLG3 from a Tmo note, I can't for the life of me find the thread though. But none talk about stock ROM and or kernal, any help would be great
Edit 1: will this radio work on GB? Blaze_4G_LB7_ICS_Radio_MOD ...... Direct DL, CAN BE USED FOR T-MOBILE/WIND ON ICS
Radios are a different piece of firmware and are not affected by ROM or kernel so as long as the radio is compatible and your APN is correct it will work no matter the ROM
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
Radios are a different piece of firmware and are not affected by ROM or kernel so as long as the radio is compatible and your APN is correct it will work no matter the ROM
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
thank you sir.
so based on what I can try the Blaze radio and just see if it works good for me? Would I be able to do a Direct Download of the radio and just flash from CWM?
Yes any 989 radio should work on our rockets just like our radios just grab a flashable radio and do your thing but again remember APN
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
Yes any 989 radio should work on our rockets just like our radios just grab a flashable radio and do your thing but again remember APN
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
well the apn is set now, will that change once i flash the radio?
Shouldn't no
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
Shouldn't no
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
thank you sir, i will try this out tonight when i get home and report back.
Try the tlle4 radio
Sent from my SGH-T989 using xda premium
hiz99 said:
Try the tlle4 radio
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
is that for T-mobile on the west coast? I was going to try the Blaze radio, but not sure it will play nice with GB?
also do you have a link for said radio?
waxworkz said:
is that for T-mobile on the west coast? I was going to try the Blaze radio, but not sure it will play nice with GB?
also do you have a link for said radio?
Click to expand...
Click to collapse
Coasts have nothing to do with it bro hate to tell ya so just test as many radios as you can
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Illnevertell said:
Coasts have nothing to do with it bro hate to tell ya so just test as many radios as you can
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
just asking because I just saw a thread asking about best radio for east coast LOL. I didnt figure the coast would have much impact but had to ask
Do you think the Blaze radio will play nice with GB INT??
waxworkz said:
just asking because I just saw a thread asking about best radio for east coast LOL. I didnt figure the coast would have much impact but had to ask
Do you think the Blaze radio will play nice with GB INT??
Click to expand...
Click to collapse
Like said above , radio is working independantly ... Just flash the radio and setup the apn and test ... report back for results ... And no matter what you do , t mobile data sucks on SR ...
mahanddeem said:
Like said above , radio is working independantly ... Just flash the radio and setup the apn and test ... report back for results ... And no matter what you do , t mobile data sucks on SR ...
Click to expand...
Click to collapse
it wont suck as bad as edge! its really only for the drive and days off. other than that i have wifi at home and work
waxworkz said:
Ok so i have an AT&T Skyrocket, rooted but other wise stock on t-mobile. The edge speeds are killing after a few days, I can't get another phone at this time and my skyrocket is in perfect shape. The phone is rooted but otherwise stock on GB, of all the threads I searched, none speak about using a stock ROM and kernal with a different radio? I am wary of bricking my phone and had asked for help from some one local but that was a no go. So I am going to try and flash the radio myself, if I can find one that works nicely with stock ROM and kernal?? I have read of people using the Blaze radio and the UVLG3 from a Tmo note, I can't for the life of me find the thread though. But none talk about stock ROM and or kernal, any help would be great
Edit 1: will this radio work on GB? Blaze_4G_LB7_ICS_Radio_MOD ...... Direct DL, CAN BE USED FOR T-MOBILE/WIND ON ICS
Click to expand...
Click to collapse
Not sure if you are still trying to do this but it is working for me just fine at the moment, though I am not on stock ROM. I am on CM10. I just made a post that may have some info in it that can help you, I will link to it here: http://forum.xda-developers.com/showthread.php?p=36619356#post36619356
I have a S2 i727R which is unlocked. Im trying to set it up to use it with mobilicity. its running android version 4.0.4. I also have it rooted. I searched around the forum and I tried using a few radios which I found in seperate threads. I used the t989 KID and VKI radios and I tried the Blaze 4G radio.
The problem is that whenever I flash the radio, my phone does not detect the sim card! It keeps saying Insert sim card. I even tried flashing the stock radio but the problem is still there.
Any help? thanks alothttp://forum.xda-developers.com/showthread.php?p=37144785&posted=1#
sim might not be all the way in.
also all the radios you flashed are NOT for rogers. For rogers I've had really good reception, call quality and decent data speed with ucll3.
icenight89 said:
sim might not be all the way in.
also all the radios you flashed are NOT for rogers. For rogers I've had really good reception, call quality and decent data speed with ucll3.
Click to expand...
Click to collapse
sorry, i meant to write for mobilicity.
ibrahim769 said:
sorry, i meant to write for mobilicity.
Click to expand...
Click to collapse
Those are tmobile radios that you're flashing
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Those are tmobile radios that you're flashing
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I read somewhere that it would work on Mobilicity/Wind? Sorry, i dont really know much about this stuff yet lol. Where would I find the appropriate radios? I searched alot around the forum, no luck
ibrahim769 said:
I read somewhere that it would work on Mobilicity/Wind? Sorry, i dont really know much about this stuff yet lol. Where would I find the appropriate radios? I searched alot around the forum, no luck
Click to expand...
Click to collapse
I don't know if they'll work or not I'm just letting you know they're for a different carrier.
There is a radio thread (it's old and I don't remember what's in there) in the dev section. There are also new radios scattered in the dev section.
The Rogers radio is uxlf3 I think
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Vincom has stickies in the development section where you can find radios. Look there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Here's all the radios from Mohan
Scroll down to the Rogers radios
http://forum.xda-developers.com/showthread.php?p=28350575
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Here's all the radios from Mohan
Scroll down to the Rogers radios
http://forum.xda-developers.com/showthread.php?p=28350575
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. But will these support mobilicity? (AWS band)
ohh and ive looked in vincoms thread. Tried most of the radios there. When I had the stock radio, with my mobilicity sim i could detect other networks. but after i flashed the t989 radio, it kept saying no sim card.
ibrahim769 said:
Thanks. But will these support mobilicity? (AWS band)
ohh and ive looked in vincoms thread. Tried most of the radios there. When I had the stock radio, with my mobilicity sim i could detect other networks. but after i flashed the t989 radio, it kept saying no sim card.
Click to expand...
Click to collapse
experiment, but if those don't work give the i757 bell radio a try, I believe that supports aws
I727r mobilicity
icenight89 said:
sim might not be all the way in.
also all the radios you flashed are NOT for rogers. For rogers I've had really good reception, call quality and decent data speed with ucll3.[/Q
T69UVLB7
Click to expand...
Click to collapse
I recently flashed to Vincom's SUPERLITE CM10 JB4.1.2 RoM | V8.0.
Ive gotten things up and running pretty well, but there is one major issue I seem to be having. My phone is not consistently able to connect to data on AT&T. I am frequently losing my data connections in locations where I have always had them in the past.
I searched around on his developer thread but didnt see an answer. I saw a reference to APNs for AT&T, but his note says these should now be included in the ROM I flashed, so Im not sure if I am missing something.
Anyone know if this is a common problem or how I can troubleshoot it and get up and running again?
Thanks.
Haven't heard of this being a problem. What modem (baseband) are you on? You can find it in settins, about phone.
Also, in settings wireless, more, mobile networks, Check that the access point name is on att LTE
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Haven't heard of this being a problem. What modem (baseband) are you on? You can find it in settins, about phone.
Also, in settings wireless, more, mobile networks, Check that the access point name is on att LTE
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Its gotten worse. Ive spent the last 5 hours with almost zero data access.
I see baseband version i727UCLI3.
Access Point name was was set to ATT wap,cingular. I switched it to ATT LTE (pta)...should this fix it? Any idea why this would have happened? Will I need to keep checking this or was it just something from the ROM flash?
flash the ucli3 radio again or try another ics radio
which recovery are you on
vincom said:
flash the ucli3 radio again or try another ics radio
which recovery are you on
Click to expand...
Click to collapse
I am using TWRP for recovery if that is what you mean?
I will search around for how to locate and flash a radio...does it matter which I use or any ICS radio should be OK?
Read vincom's stickies in the development forum. You'll find everything you need there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
lol. it just happened to me when testing a custom kernel, seems to be a prob when doing so, i just restarted and it worked
vincom said:
lol. it just happened to me when testing a custom kernel, seems to be a prob when doing so, i just restarted and it worked
Click to expand...
Click to collapse
Super. Glad I dont need to reflash a radio. Although I will let you know if it happens again (and will flash a new radio to test)
lirong said:
Super. Glad I dont need to reflash a radio. Although I will let you know if it happens again (and will flash a new radio to test)
Click to expand...
Click to collapse
reflashing radio is the simplest things todo on our phones, no harm will come of it and sometimes beneficial as cwm/twrp wiping and flashing roms dont touch that parition
I've been having an issue with all 4.2.2 roms where if I either make a phone call or receive one my screen will go off, and none of the buttons will work during the phone call. I cant even hang up. I would have to wait for the other person to hang before I can use my phone again. I've tried 3 different 4.2.2 rom and I have the same same problem with all of them. With 4.1.2 I don't have those issues. I used the stock JB radio and kernel. Any ideas? Thanks in advanced.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
1. Search and read
2. Install the UCMCM1 radio
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
rpr69 said:
1. Search and read
2. Install the UCMCM1 radio
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
OK, I've searched the whole forum for anything related to UCMCM1 and only got two hits; this post and another that briefly mentions UCMCM1. Im assuming that UCMCM1 and UCMC1 are not the same. Would you know where I can download UCMCM1? Thank you for your help.
its the same it was a typo, its ucmc1
Nixdawg1 said:
OK, I've searched the whole forum for anything related to UCMCM1 and only got two hits; this post and another that briefly mentions UCMCM1. Im assuming that UCMCM1 and UCMC1 are not the same. Would you know where I can download UCMCM1? Thank you for your help.
Click to expand...
Click to collapse
Its ucmc1 and you can find it in the dev section and its probably linked elsewhere I'm not going to link because you need to work on those search skills.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
mtdew said:
Its ucmc1 and you can find it in the dev section and its probably linked elsewhere I'm not going to link because you need to work on those search skills.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
vincom said:
its the same it was a typo, its ucmc1
Click to expand...
Click to collapse
In that case yes, I am using UCMC1 when installing 4.2.2 roms and still experiencing the same problems.
Nixdawg1 said:
In that case yes, I am using UCMC1 when installing 4.2.2 roms and still experiencing the same problems.
Click to expand...
Click to collapse
Sorry, yes I meant UCMC1, I was typing from memory. I am confused then because you said you used the stock JB radio, which I don't believe is UCMC1. In that case, you may have an APN problem, what carrier are you with?
rpr69 said:
Sorry, yes I meant UCMC1, I was typing from memory. I am confused then because you said you used the stock JB radio, which I don't believe is UCMC1. In that case, you may have an APN problem, what carrier are you with?
Click to expand...
Click to collapse
Sorry for the confusion, Im with AT&T.
Hrm. I'm out of ideas now, I don't think I've heard of this problem before.
att's stock jb radio is ucmc1, perform a full wipe then go back to stock 4.1.2, install twrp then wipe then flash 4.22