Is this the JB modem or something else? I'm not sure if should i install it with the jelly bean leak.
Sent from my SCH-I535 using Tapatalk 2
Seems like it. I flashed the one from invisiblek's modem thread with the filename VRLI5.modem.zip and it's working fine for me.
EDIT: Never mind, that's not the modem. According to this post it seems to be related to power management. I never flashed it, unless it was included with the modem zip.
SilentDude56k said:
Seems like it. I flashed the one from invisiblek's modem thread with the filename VRLI5.modem.zip and it's working fine for me.
EDIT: Never mind, that's not the modem. According to this post it seems to be related to power management. I never flashed it, unless it was included with the modem zip.
Click to expand...
Click to collapse
Here is the flashable VRL15 modem... Now can someone make this Odin flashable??
http://rootzwiki.com/topic/34053-of...zon-sgs3-sch-i535-odin-or-recovery-flashable/
edthesped said:
Is this the JB modem or something else? I'm not sure if should i install it with the jelly bean leak.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
YEs it is . use the link that i posted to take you to rootzwiki and download it there.
what is this talk of .RPM on touchwiz jellybean? i have searched and found little info... sorry op not trying to hijack your thread!
Here's a couple posts I found earlier today about rpm:
http://forum.xda-developers.com/showpost.php?p=33187381&postcount=4155
and this latter one is more descriptive about what changes with OTA's and apparently only the rpm is of consequence...
http://forum.xda-developers.com/showpost.php?p=32538851&postcount=3532
and finalement, here's a post with the JB leak's rpm:
http://forum.xda-developers.com/showpost.php?p=33557322&postcount=260
Now I still don't know what this does other than exist.
yea im trying to figure out its purpose and if i need to add it too my guide. thx for those links!
droidstyle said:
yea im trying to figure out its purpose and if i need to add it too my guide. thx for those links!
Click to expand...
Click to collapse
I'm still new to Samsung, so someone correct me if I'm way off-base, but the gist I got was that when a new rom (or leak) comes from verizon, it includes rom+kernel+rpm+modem... which on an HTC device we called rom+kernel+firmware+radio. So my understanding is that if you just flash the new radios without the new firmware that matches up with what your dev used as a base, there could be compatibility issues.
(Much more knowledgeable people discussed this in the Cleanrom thread as in those links above).
i understand all of that...just trying to figure out what exactly is rpm. thx !
droidstyle said:
i understand all of that...just trying to figure out what exactly is rpm. thx !
Click to expand...
Click to collapse
+1 I don't like to blindly flash...
Sent from my SCH-I535 using Tapatalk 2
In simple terms if I understand correctly it installs files that you don't get in flashing a ROM. Gives you an option if you don't want to go back to stock via Odin and OTA back up to current version.
sfobrien said:
In simple terms if I understand correctly it installs files that you don't get in flashing a ROM. Gives you an option if you don't want to go back to stock via Odin and OTA back up to current version.
Click to expand...
Click to collapse
i understand that...lol
whats its purpose in android is my question?
droidstyle said:
i understand that...lol
whats its purpose in android is my question?
Click to expand...
Click to collapse
RIL files and Power Managment files to coincide with ROM and Modem version to avoid possible conflicts and issues?
sfobrien said:
RIL files and Power Managment files to coincide with ROM and Modem version to avoid possible conflicts and issues?
Click to expand...
Click to collapse
ahh ok now were getting somewhere! thx!!
So does an odin back to stock undo whatever this file does or does another rpm file need to be flashed to undo it?
edthesped said:
So does an odin back to stock undo whatever this file does or does another rpm file need to be flashed to undo it?
Click to expand...
Click to collapse
If you Odin to a prior version of stock, it should be included in the zip which simultaneously changes the modem. The reason an rpm is being discussed is because when flashing custom roms and modems, this isn't updated. Think of an Odin flash of older images as "reversing an update," all those same files are added when you accept an OTA, so they'll be changed if you Odin an older stock image.
If I'm wrong, I'll gladly redact my comment but that's what I understand from this discussion.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
If you Odin to a prior version of stock, it should be included in the zip which simultaneously changes the modem. The reason an rpm is being discussed is because when flashing custom roms and modems, this isn't updated. Think of an Odin flash of older images as "reversing an update," all those same files are added when you accept an OTA, so they'll be changed if you Odin an older stock image.
If I'm wrong, I'll gladly redact my comment but that's what I understand from this discussion.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks, it's starting to make more sense to me. I'm not unfamiliar with root but typically only do so to eliminate bloat, otherwise I'm happy with stock builds. The JB leak changed things a little so I want to get a better handle on what I'm installing and why.
stable
Why can't this just be simple.....I just want a good stable everything and then leave it alone.....Will that ever happen?
masonjb said:
Why can't this just be simple.....I just want a good stable everything and then leave it alone.....Will that ever happen?
Click to expand...
Click to collapse
flash back to stock and leave your device alone...pretty simple.
So if we revert to a ROM backup, do we need to manually turn back the rpm as well, like we do with the modem? Sounds like we need vrali5 for jb leak. I will play around with jb for awhile though go back to ICS for everyday stability use, until I find a jb I like. Do I need to revert the rpm when I restore ICS? Where do I find older rpms. Thanks.
Sent from my SCH-I535 using Tapatalk 2
Related
SPH-D700-DK28-8g-rel.tar.md5 OFFICIAL
Here is a .tar file for Odin that will allow you to upgrade your phone to Android 2.2.1 Froyo! It will break your root, but you can always one click root after.
FULL GUIDE AND INSTRUCTIONS HERE
Essentials:
1. Odin in PDA slot
2. Flash away!
Download Odin TAR:
http://www.multiupload.com/C5YEZK3WF7
Thanks. Do I use the lastest version of Odin?
dangdang said:
Thanks. Do I use the lastest version of Odin?
Click to expand...
Click to collapse
Yes Version 1.61
What about the pit file?
Sent from an Epic on roids
flopez76 said:
What about the pit file?
Sent from an Epic on roids
Click to expand...
Click to collapse
I'm using victory_8G_100528.pit
You don't need the pit with the tar file.
Sent from my SPH-D700 using XDA App
This is a full Odin .tar -- no pit file needed.
Question: I had DK17 with Quantum ROM 1.5...I just flashed the .tar in Odin. No PIT file. I also unchecked F.Reset Time (I think thats what it said). I flashed correctly, right? I have 100% stock DK28 now, correct.
Also, is this the official Froyo build?
Everything seems to be working correctly. Rotation is still a tad slow though. Lock screen lag is 100% gone.
Dupe - this has been posted twice already.
panthar said:
Dupe - this has been posted twice already.
Click to expand...
Click to collapse
That's because the mods took it down, then put it back up again.
Man, what a mess. Mine's still in "quarantine" for some reason. Ah well, guess it's good to have at least one thread that's working!
mattallica76 said:
That's because the mods took it down, then put it back up again.
Click to expand...
Click to collapse
panthar said:
Man, what a mess. Mine's still in "quarantine" for some reason. Ah well, guess it's good to have at least one thread that's working!
Click to expand...
Click to collapse
Yea I was wondering why it was, but never got an answer
Sent from an Epic on roids
I'm less annoyed now I guess since people have already posted rooted versions etc. As long as the stuff gets to the users, in the end I'm happy. I'm giving up on getting a response from the mod, I think - this here is turning into a good thread so let's go with it.
flopez76 said:
Yea I was wondering why it was, but never got an answer
Sent from an Epic on roids
Click to expand...
Click to collapse
panthar said:
I'm less annoyed now I guess since people have already posted rooted versions etc. As long as the stuff gets to the users, in the end I'm happy. I'm giving up on getting a response from the mod, I think - this here is turning into a good thread so let's go with it.
Click to expand...
Click to collapse
Sorry guys, didn't seen any other thread with the .tar (because it was deleted I guess). Got mine from a source and posted it. Didn't know anyone else posted it. This one is a little different anyway, because it doesn't require the victory .pit to work.
OP can you please remind the users that they will BREAK ROOT and recovery if they flash this.... They will also not be able to install Themes........
Thank you
rjmjr69 said:
OP can you please remind the users that they will BREAK ROOT and recovery if they flash this.... They will also not be able to install Themes........
Thank you
Click to expand...
Click to collapse
I will add that, but users can always root again with one click.
It's ok - theres always silly drama around release time so mine must have already been hidden. Keep this going!
kennethpenn said:
Sorry guys, didn't seen any other thread with the .tar (because it was deleted I guess). Got mine from a source and posted it. Didn't know anyone else posted it. This one is a little different anyway, because it doesn't require the victory .pit to work.
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
Do not need pit people, it's the full md5
Will this erase all data?
lehaman310 said:
Will this erase all data?
Click to expand...
Click to collapse
This will erase data, root, and CWM. Your phone will be stock DK28 if you flash this.
Haven't found much support on this issue, been trying using super one click, I get to stage 7 then it says waiting for phone and hangs...phone is on uckk3...
Sent from my GT-P7500 using xda premium
immor2al said:
Haven't found much support on this issue, been trying using super one click, I get to stage 7 then it says waiting for phone and hangs...phone is on uckk3...
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
Umm... that's probably because it's meant for froyo bro. If you can still boot into the rom that you were in, add the su fix in the Doctorz rom and then flash it. If not, odin to stock, root FROYO, 3e, gtg community kernel. You know the deal.
This phone is a headache....my skyrocket is so much less frustrating!!!
Sent from my GT-P7500 using xda premium
So....you are saying ....there is no root for g.bread?!....why do I see 2.3.6 roms everywhere....or am I not looking at this right?.....my goal was froyo to gingerbread ....then root and flash some better performance roms....(scratching head)
Sent from my GT-P7500 using xda premium
where were you coming from and where to you want to go?
qkster said:
where were you coming from and where to you want to go?
Click to expand...
Click to collapse
I second this notion.
immor2al said:
Haven't found much support on this issue, been trying using super one click, I get to stage 7 then it says waiting for phone and hangs...phone is on uckk3...
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
If you had really researched it you would have read that SOC won't root the kk3 leak.
The GB roms that you see have been modded or ported.
To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11.
Truckerglenn said:
If you had really researched it you would have read that SOC won't root the kk3 leak.
The GB roms that you see have been modded or ported.
To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11.
Click to expand...
Click to collapse
Yeah, that was what I was gonna suggest.
I wasn't sure if the OP wanted to stay on stock or go from there to another custom ROM.
I must say..you guys around here are brutal..forgive me if my language on the matter is sub-par...i do understand the concept though...i have flashed back to stock and thanks to super thread been working from there with success....There are a ton of threads regarding this device..I treated it mostly like it was similar to a skyrocket.. My mistake..thx
Sent from my SAMSUNG-SGH-I727 using xda premium
Anyone know where i can get camera firmware for this device..would be great..having issues there as well...:-0
Sent from my SAMSUNG-SGH-I727 using xda premium
immor2al said:
I must say..you guys around here are brutal..forgive me if my language on the matter is sub-par...i do understand the concept though...i have flashed back to stock and thanks to super thread been working from there with success....there is a ton of threads on this device..i went at it like it was similar to a skyrocket.. My mistake..thx
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Brutal?
I thought we were trying till be helpful...
Glad you got it going though
Truckerglenn said:
If you had really researched it you would have read that SOC won't root the kk3 leak.
The GB roms that you see have been modded or ported.
To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11.
Click to expand...
Click to collapse
I'm sorry, but I'm a total noob with Samsung. I rooted to a particular ROM, but ran into some issues and had to unbrick the phone. Upon doing so, I selected the kk3 leak and then lost root. I used SOC 2.3.3 to try to reroot, but I got stuck at step 7. So I want to try flashing Entropy's kernel as you mentioned. I'm not sure how to do this though. The kernel is in a CWM .zip format, but Odin reads .tar files. Do I unzip the .zip file and then convert to a .tar file? This didn't seem to work when I initially tried it, but perhaps I did something wrong. Any special settings I need to use? Also, do I just need to reboot after I flash it and I will have root? If not, what else must I do?
Sorry again for my lack of understanding. I've been trying to find an answer for hours and have become a little desperate. Thanks in advance for any and all help.
bloodbath said:
I'm sorry, but I'm a total noob with Samsung. I rooted to a particular ROM, but ran into some issues and had to unbrick the phone. Upon doing so, I selected the kk3 leak and then lost root. I used SOC 2.3.3 to try to reroot, but I got stuck at step 7. So I want to try flashing Entropy's kernel as you mentioned. I'm not sure how to do this though. The kernel is in a CWM .zip format, but Odin reads .tar files. Do I unzip the .zip file and then convert to a .tar file? This didn't seem to work when I initially tried it, but perhaps I did something wrong. Any special settings I need to use? Also, do I just need to reboot after I flash it and I will have root? If not, what else must I do?
Sorry again for my lack of understanding. I've been trying to find an answer for hours and have become a little desperate. Thanks in advance for any and all help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437548
YOU CANNOT ROOT GINGERBREAD 2.3.6, can you read that...? Or should I make a new thread like you guys do about rooting this frigging firmware? Hows that for brutal
Sent from my SAMSUNG-SGH-I997 using xda premium
dman3285 said:
YOU CANNOT ROOT GINGERBREAD 2.3.6, can you read that...? Or should I make a new thread like you guys do about rooting this frigging firmware? Hows that for brutal
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
lol. Well another member said "To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11." I thought that meant it could be rooted. Sorry for the misunderstanding.
This is the complete stock tar for the AT&T skyrocket. It includes the radio and everything to return to complete stock, out of the box state. It does not trip the flash counter.
-download and extract the tar.md5 with 7zip
http://d-h.st/bd3
You can also get it directly from the source here by making an account with them
-Make an account
-click the firmware tab
-type i727 in the search box
-you will also have the choice to select the Rogers version here
http://www.sammobile.com/firmware/
good stuff!
Sent from my SGH-T989 using Tapatalk 2
xcrazydx said:
This is the complete stock tar for the AT&T skyrocket. It includes the radio and everything to return to complete stock, out of the box state. It does not trip the flash counter.
-download and extract the tar.md5 with 7zip
http://d-h.st/bd3
You can also get it directly from the source here by making an account with them
-Make an account
-click the firmware tab
-type i727 in the search box
-you will also have the choice to select the Rogers version here
http://www.sammobile.com/firmware/
Click to expand...
Click to collapse
Hey thanks I was just looking for that the other day. Definatly could come in handy if I need to go back to stock...
Sent from my SAMSUNG-SGH-I727 using xda premium
---------- Post added at 05:57 AM ---------- Previous post was at 05:46 AM ----------
i know this is totally off topic but i noticed you use dev host for sharing files is that a better alternative as opposed to dropbox? if so is dev host free or relativley inexpensive? drop box is ok but really limits the amount you can upload. but what i do like about dropbox is i can access my files 24/7 from anywhere with a internet connection and they have an android app which makes uploading files very easy...
garydv2002 said:
Hey thanks I was just looking for that the other day. Definatly could come in handy if I need to go back to stock...
Sent from my SAMSUNG-SGH-I727 using xda premium
---------- Post added at 05:57 AM ---------- Previous post was at 05:46 AM ----------
i know this is totally off topic but i noticed you use dev host for sharing files is that a better alternative as opposed to dropbox? if so is dev host free or relativley inexpensive? drop box is ok but really limits the amount you can upload. but what i do like about dropbox is i can access my files 24/7 from anywhere with a internet connection and they have an android app which makes uploading files very easy...
Click to expand...
Click to collapse
I use both. I use dev-host for things that I upload that will possibly have more traffic, as dropbox can't handle it. I use dropbox for personal stuff that I'm not uploading for the community. Dev-host has free hosting
Can this be flashed in Odin?
I know, noob type question. But I was wondering if that is how this file was meant to be flashed. I need to put my Skyrocket back to stock.
chocodough said:
Can this be flashed in Odin?
I know, noob type question. But I was wondering if that is how this file was meant to be flashed. I need to put my Skyrocket back to stock.
Click to expand...
Click to collapse
Yes, it's only for Odin.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have a question. I updated to ICS VIA odin and now my camera wont work. I tried every possible idea, wiping and flash back to stock 2.3.5 from another file in the stickie section but no luck. Will this file get my camera back up? How does it differ from the TAR file on the stickie section? Any help will be gladly appriciated
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
zancho1 said:
I have a question. I updated to ICS VIA odin and now my camera wont work. I tried every possible idea, wiping and flash back to stock 2.3.5 from another file in the stickie section but no luck. Will this file get my camera back up? How does it differ from the TAR file on the stickie section? Any help will be gladly appriciated
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
which sticky, this one http://forum.xda-developers.com/showthread.php?t=1652398,
if yes did you wipe everything first
vincom said:
which sticky, this one http://forum.xda-developers.com/showthread.php?t=1652398,
if yes did you wipe everything first
Click to expand...
Click to collapse
The file name i have is (SGH-I727-UCKJ2-k0nane) thats what i used from one of the stickies. well i guess my phone is a done. i already flashed using the file on this thread and still i get "Camera Failed" when i try to launch the camera app. i dont know what else to do. if any one has a solution give me a heads up plz. will gladly appriciate
zancho1 said:
The file name i have is (SGH-I727-UCKJ2-k0nane) thats what i used from one of the stickies. well i guess my phone is a done. i already flashed using the file on this thread and still i get "Camera Failed" when i try to launch the camera app. i dont know what else to do. if any one has a solution give me a heads up plz. will gladly appriciate
Click to expand...
Click to collapse
read the link(its in my sig) i posted, its mine, its a sticky in general, k0anes thread is a little outdated. if that doesnt make your camera come back to life it could be a hardware prob
vincom said:
which sticky, this one http://forum.xda-developers.com/showthread.php?t=1652398,
if yes did you wipe everything first
Click to expand...
Click to collapse
Thanks for your help. I've tried everything. Kernels, Flashing ICS Stock and Back to 2.3.5 Stock. Ive tried Custom Roms.. and nothing. I even open the device about 10min ago everything looks fine but who knows. it was working fine prior to updating... thanks tho i really do appriciate man.:good:
Hiya.
I was running completely stock S3. I had never rooted before. I rooted the phone easily enough, I installed SuperNexus using the instructions in the thread but it just doesn't want to boot up. The phone just displays the coloured X and goes no further, and now I'm unsure of what to do. If anyone could advise me that would be great!
-baldywaldy
why are you flashing supernexus on a gs3? you super derped
droidstyle said:
why are you flashing supernexus on a gs3? you super derped
Click to expand...
Click to collapse
Because there's a stable ROM for it? lol
baldywaldy said:
Because there's a stable ROM for it? lol
Click to expand...
Click to collapse
Isnt that a at&t sgs3 rom? This is the verizon section.
droidstyle said:
you super derped
Click to expand...
Click to collapse
baldywaldy said:
Because there's a stable ROM for it? lol
Click to expand...
Click to collapse
What droid said. Either you flashed a rom not made for your phone or you posted this in the wrong forum...super derped...
The answer is simple, you flashed a rom that was NOT developed for the verizon SIII and that's why it won't boot. Your best bet is to odin back to stock and flash a rom that's built for the verizon SIII. I am not trying to be mean, but you really should be reading the original post when you go to flash a rom, or at least make sure your in the right section. Just because its stable for another phone does not mean its stable for our phone.
Ditto...
Agree with previous posters... pray that a re-flash of a stock or the OTA d2vzw ROM will work and whatever you did flash didn't blow your modem/radio files. I'm no expert on the SGS3 but I'm oh-so-familiar with flashing custom ROMs and files onto phones and if you're a beginner... you better triple-quadruple-double check the ROM you are looking at (no I don't mean the one you are about to flash, not the one you just downloaded, the one you are reading about on a forum/thread!) is correct for not only your model phone (SGS3), but correct for your variant of the phone... I535 is the d2vzw model and don't touch or even bother reading or downloading any other variants stuff.
Good luck! :good:
This thread has links to d2vzw/i535 files that can be flashed with Odin:
http://forum.xda-developers.com/showthread.php?t=1755386
This is the Odin tool download (which you should already have if you are flashing stuff):
https://dl.dropbox.com/u/101292936/Odin307.zip
baldywaldy said:
Because there's a stable ROM for it? lol
Click to expand...
Click to collapse
yea so stable it dont boot huh...lmao
As can be gleaned from the thread title, I install the latest Synergy ROM (484) and my camera app crashes as well as GPS failing to lock on. I have tried different camera apps and using GPS Status. Does anyone know of a fix, as I've tried searching through the 3000 page forum? LOL
Thanks in advance for any help
I just rewiped and flashed and now my GPS is working, but camera is still broken. :'(
Flash a different kernel. Like kt747 tw version.
Sent from my SCH-I535 using Tapatalk 2
hybridxer0 said:
I just rewiped and flashed and now my GPS is working, but camera is still broken. :'(
Click to expand...
Click to collapse
Doubt if anyone has a fix because the ROM is not broken. I've used the last 3 builds and never had a problem. Download fresh and wipe and try again. I recommend starting with the included stock kernel. and oh yes, make sure you are on the correct modem firmware wince the ROM does not install that.
Bad download? Try downloading again.
Sent from my SCH-I535 using Tapatalk 4 Beta
Did you superwipe? Flash any firmware update?
Firmware is key. Not all roms have been rebased to match the newest. Make sure you flash the firmware with .Tz file. Seen pages of people with camera problems on synergy because of this.
Sent from my SCH-I535 using xda premium
blueb0x said:
Did you superwipe? Flash any firmware update?
Firmware is key. Not all roms have been rebased to match the newest. Make sure you flash the firmware with .Tz file. Seen pages of people with camera problems on synergy because of this.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
MF1ModemandBootchainwithMb1TZ.zip is what I flashed. No bueno.
tpike said:
Bad download? Try downloading again.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
file checker verified twice.
DigitalMD said:
Doubt if anyone has a fix because the ROM is not broken. I've used the last 3 builds and never had a problem. Download fresh and wipe and try again. I recommend starting with the included stock kernel. and oh yes, make sure you are on the correct modem firmware wince the ROM does not install that.
Click to expand...
Click to collapse
I'm sorry if I implied the ROM was at fault, perhaps I am missing some step, but I did just now do a complete wipe (3x), re-downloaded the ROM and firmware, and it seems the only problem MY phone has is the Camera
hybridxer0 said:
I'm sorry if I implied the ROM was at fault, perhaps I am missing some step, but I did just now do a complete wipe (3x), re-downloaded the ROM and firmware, and it seems the only problem MY phone has is the Camera
Click to expand...
Click to collapse
I'd suggest you flash the VRBMB1 firmware.
call elegoil
SlimSnoopOS said:
I'd suggest you flash the VRBMB1 firmware.
Click to expand...
Click to collapse
Tried that. *Sigh* I think I am going to go to a different ROM, not having the Camera work is a dealbreaker. Whether it's ignorance on my part, or lack of documented resolutions for this problem that I have seen others have, I can't go this long without it.
Maybe flashing another ROM and coming back at a later time may solve the issue.
hybridxer0 said:
Tried that. *Sigh* I think I am going to go to a different ROM, not having the Camera work is a dealbreaker. Whether it's ignorance on my part, or lack of documented resolutions for this problem that I have seen others have, I can't go this long without it.
Maybe flashing another ROM and coming back at a later time may solve the issue.
Click to expand...
Click to collapse
I had the same problem and I fixed it by flashing a different kernel. I used the kt47 kernel and Now everything works.
Good luck
Peace
tylerlawhon said:
Flash a different kernel. Like kt747 tw version.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
OP, try this if you havent been done with this problem already. its 4am for me right now and I'm tired as balls and was at my wits end but then after flashing god knows how many different options hoping the camera would magically come back...i flash the kt747 tw kernel and its all gravy now. I dont understand how. I dont want or need to understand how. I am thankful! :good: