Hey guys, replacing the digitizer on my TF700 (current one keeps clicking randomly). Any particular suggestions?
Related
Hi,
My Fuze screen broke few days ago. I could see black liquid type in half of the screen. The outside touchscreen glass is still not broke.
Can anyone help me find the right part? I am willing to purchase both the touchscreen and Digitizer. I am trying to simplify my install process.
Any help is appreciated.
Thanks in advance.
can anyone help me?
Hi Guys,
I have little problem with my Desire S. I have recently replaced the digitizer. After fitting it and checking the phone i discovered that top area of touch screen isn't working. So I took it apart again and accidentally broke the LCD. So I ordered LCD and digitizer as one unit from ebay, fitted it.....And LCD is working fine, but new digitizer isn't working properly. I'm pressing bottom half but its registering touch in top half. Also for buttons at the bottom don't work.
So I plugged in old digitizer and it works ok apart from that faulty top area.
I had it sent over to some repair shop and they tested it with LCD/digitizer as one unit with same fault. But my old digitizer works.
Any ideas?
Thanks
Marcin
Dear XDA'ers,
Earlier this year my wife somehow broke her screen. Her screen still worked and the touch screen also worked, even the parts where the screen was cracked functioned without any problems.
After a while she got jealous of my HTC Sensation with its not-cracked-screen so she decided to do some digging and ordered "NEW TOUCH SCREEN DIGITIZER FOR HTC DESIRE HD A9191 G10 + tools" of ebay (itemnumber =190662521121).
I followed a video on youtube (video id = jG6RLR_tAEs ) to replace the screen but now I am stuck at the seperating the lcd from the digitizer part.
My wife wanted to try seperating it and ended up breaking the outer glass even more so now I think we need an LCD too.
In the video the guy also said he had trouble seperating the two and ended up ordering the chassis+lcd+touch screen digitizer. I want to do the same thing since all the prying messed up the chassis as well.
Does anyone know where I can get my hands on a complete set and also wheather or not my story makes sense. I haven't had much experience replacing screens on smartphones so if anyone has some tips, they're much appreciated.
Thanks in advance.
Why don't you ask the guy in the video?
Thanks for the tip, I did and he linked me to this:
ebay DOT com /itm/New-LCD-Display-Touch-Screen-Digitizer-Assembly-for-HTC-Desire-HD-G10-A9191-/221076191455?pt=LH_DefaultDomain_0&hash=item33792af8df
I recently dropped my TF300 (in the process of jerry-rigging a carrying case for it, might I add) and it happened to shatter the glass and tear some of the ribbon for the digitizer, rendering it completely useless. The LCD beneath is fine, in fact I have already separated the LCD from the digitizer itself.
My question is:
Can I buy a replacement digitizer for the TF200 and install it to my TF300?
They seem to be the same ribbons and i'm sure the dimensions are the same.
The problem is the digitizer for the TF300 is around $150 and just $50 for the TF200.
Dude word of advice only buy the tf300 glass. But replacing it will be a pain but good luck to you
Sent from my HTC Ruby using xda app-developers app
Almost sure,,
Hello hello,
i recently smashed up the same digitizer of my tf300t. There are no videos about opening the thing, so i proceeded and could unplugged the digitizer without any complication. So, after long searching i found ur question and realize that the connector is just the same. I'm almost sure that tf200 should work properly with tf300.
best regards,
Abrhm
Not the same
I'm sure you have probably figured this out by now, since it's been months, but the TF200 and the TF300 digitizers are indeed DIFFERENT.. And the TF300 can be procured pretty easily these days for about $70.00..
So, this is for the benefit of anyone else who happens to stumble across this post.
Also, heed, there has been a significantly high rate of folks, myself included, who have changed the digitizer out only to find that the touch-screen still doesn't work due to some other issue..
Hey all,
Client brought in a TF300T with a cracked digitizer, good LCD, but no touch response. Changed digitizer, everything works but touch. Original digitizer has no "G0_" number on it, but replacement is a G01.
Because the digitizer wasn't working in the first place, would this be a bad digitizer PCB? I've been searching forums for the past hour but haven't found any fixes for this particular scenario. Attached are images of the digitizers.
Thanks!