Hi guys,
I am currently using the Spigen ultra crystal screen protector. It is a very good screen protector overall except the surface is not very smooth. Has anyone tried other Spigen screen protector (Non-glass one) ?
jcboy said:
Hi guys,
I am currently using the Spigen ultra crystal screen protector. It is a very good screen protector overall except the surface is not very smooth. Has anyone tried other Spigen screen protector (Non-glass one) ?
Click to expand...
Click to collapse
My ultra crystal feels like glass. No complaints here.
Im also using a ultra clear. It a good fit til I decide on the nano slim, iloome, or feather glass by mime. Although I heard mime service sucks huge donkey bawls lol
Sent from my galaxy s4 using Tapatalk 4 Beta
I was debating between the two as there are is a significant difference in price... was leaning towards the more expensive glass ones though...
eschell27 said:
I was debating between the two as there are is a significant difference in price... was leaning towards the more expensive glass ones though...
Click to expand...
Click to collapse
I have tried the slim glass before using the ultra crystal. The thing that I don't like the glass is the edge is quite sharp, it also adds the thickness on the phone.
jcboy said:
Hi guys,
I am currently using the Spigen ultra crystal screen protector. It is a very good screen protector overall except the surface is not very smooth. Has anyone tried other Spigen screen protector (Non-glass one) ?
Click to expand...
Click to collapse
Did you install it correctly? The side with the tag "back" is the side goes onto the screen. It's also labeled "2", which makes you think that is the 2nd film you need remove after installing it.
mngdew said:
Did you install it correctly? The side with the tag "back" is the side goes onto the screen. It's also labeled "2", which makes you think that is the 2nd film you need remove after installing it.
Click to expand...
Click to collapse
Yes, I am sure I have installed it correctly since the screen protector has aligned properly for the front camera lens.
jcboy said:
Yes, I am sure I have installed it correctly since the screen protector has aligned properly for the front camera lens.
Click to expand...
Click to collapse
It's not the alignment issue. You might have reversed the sides.
mngdew said:
It's not the alignment issue. You might have reversed the sides.
Click to expand...
Click to collapse
Yes, I understand what you mean. If I have put it have the reserved side then the it wont' align the camera lens on the top right corner.
I just bought spigen glass tr and installed it, I am wondering how safe is to remove it and to re-apply?
will the adhesive still be good and will the bubbles come after re-applying ?
thank you
interaser said:
I just bought spigen glass tr and installed it without any bubble and I am wondering how safe is to remove it and to re-apply?
will the adhesive still be good and will the bubbles come after re-applying ?
thank you
Click to expand...
Click to collapse
You'll need to wipe the side with the adhesive with a alcohol wipe before reinstalling it, then squeezy out bubbles and alcohol. (take your time)
But be real careful. The adhesive side is ultra dust magnet.
interaser said:
I just bought spigen glass tr and installed it, I am wondering how safe is to remove it and to re-apply?
will the adhesive still be good and will the bubbles come after re-applying ?
thank you
Click to expand...
Click to collapse
It is safe to remove it but is going to be harder to re-apply since the dust can go in easily.
Related
I have my nexus 5 for about 3 months and i have very small scratch on my screen that only noticeable by light
sometimes when im outside and im with the phone its very annoying to see that scratch.
what can i do to remove it?
I would recommend to just put a screen protector on it that'll hide the scratch. I've bought the scratch remover and used it before on the screen and didn't have any luck getting rid of them. Spigen has an ultra crystal clear screen protector that feels nice and hides the light scratches.
Put a tempered glass
Buy a new screen costs 10$ and glue it on the lcd with loca glue
Jnewell05 said:
I would recommend to just put a screen protector on it that'll hide the scratch. I've bought the scratch remover and used it before on the screen and didn't have any luck getting rid of them. Spigen has an ultra crystal clear screen protector that feels nice and hides the light scratches.
Click to expand...
Click to collapse
Matrix_19 said:
Put a tempered glass
Click to expand...
Click to collapse
Thank you guys I will try it.
I had the same issue so I put a tempereed glass screen protector
digitLIX said:
Thank you guys I will try it.
Click to expand...
Click to collapse
Brand I used was Garmour but Nilkin is good too.
T-Cut
P.S please don't try this
Sent from my Android 5.0 Nexus 5
Has anyone tried out this Coolreall tempered glass screen protector? Appears that its edge to edge like the Nillkin protectors. Ordered one, should be here in the next couple days.
http://www.amazon.com/gp/product/B00WSRBXLS/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
I like how it says explosion proof, I am sure a grenade would destroy the screen protector and the phone.
ipaq_101 said:
I like how it says explosion proof, I am sure a grenade would destroy the screen protector and the phone.
Click to expand...
Click to collapse
I think they just mean that the glass shards won't go everywhere if the glass breaks. it will stay intact. No flying shards etc.
looks really cool. please post pics after you get it and let us know how you like it
I'm getting one on Thursday as well.
Dregur said:
I'm getting one on Thursday as well.
Click to expand...
Click to collapse
Cameron_S said:
Has anyone tried out this Coolreall tempered glass screen protector? Appears that its edge to edge like the Nillkin protectors. Ordered one, should be here in the next couple days.
http://www.amazon.com/gp/product/B00WSRBXLS/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
Any update guys?
gsrrr said:
Any update guys?
Click to expand...
Click to collapse
+1
would be interested to see the results as well.
Unfortunately, they sent me the wrong color. I was asking for black instead of gold. I'm now trying to figure out if it's worth the hassle in exchanging.
My Coolreal tempered glass screen protector arrived today from Amazon. The quality looks really good, and it will definitely cover the entire screen. My only concern is that it appears the adhesive is only on the gold border and not the center of the screen. Haven't put it on my wife's S6 yet.
UTLK Galaxy S6 Screen Protector HD Clear Tempered Glass
I couldn't wait for the others to test these, so I bought the white version from UTLK on amazon:
http://www.amazon.com/gp/product/B00WOA5HM0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Just installed it and it looks interesting, I mean its different from other glass protectors I have used before on my phones. but this definitely covers the whole screen and bezel, there is a little haloing as you see in the pics but they are disappearing. There screen protector quality attracts a bit of smudging which is not common in high quality glass. Overall I think its a good option at the price.
I installed one on my wife's phone last night. Results were good, some slight haloing around the edges as well. Hopefully they will disappear.
Cameron_S said:
I installed one on my wife's phone last night. Results were good, some slight haloing around the edges as well. Hopefully they will disappear.
Click to expand...
Click to collapse
Thanks for the photos and mine has some haloing too. Going to wait a few days and might try out the UTLK brand if the haloing does not go away.
I got that one from Amazon an like the others there was a little haloing but I had to remove it as my tech21 case was pushing the protector off every time I press a side button... now I'm using those smaller protectors but I think I will end up with a plastic one... (I like my case ok?! heheheh)
LGSilva said:
I got that one from Amazon an like the others there was a little haloing but I had to remove it as my tech21 case was pushing the protector off every time I press a side button... now I'm using those smaller protectors but I think I will end up with a plastic one... (I like my case ok?! heheheh)
Click to expand...
Click to collapse
i had the same exact problem with the Spigen hybrid case. i decided to send back the case and hope that the Diztronic case doesn't have the same issue as i really like the Collreall protector.
Does anyone know of one of these Edge to Edge screen covers that has adhesive on the screen as well and not just the edges?
Cameron_S said:
Does anyone know of one of these Edge to Edge screen covers that has adhesive on the screen as well and not just the edges?
Click to expand...
Click to collapse
The one I removed had adhesive on the screen. No problems with touch.
The one I just applied has adhesive on the screen. (And also as much halo as the last protector I had )
Ah, OK I wasn't sure these had adhesive on the screen or not, thought that maybe had something to do with the halo. Oh well.
hi
avid.aria said:
I couldn't wait for the others to test these, so I bought the white version from UTLK on amazon:
http://www.amazon.com/gp/product/B00WOA5HM0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Just installed it and it looks interesting, I mean its different from other glass protectors I have used before on my phones. but this definitely covers the whole screen and bezel, there is a little haloing as you see in the pics but they are disappearing. There screen protector quality attracts a bit of smudging which is not common in high quality glass. Overall I think its a good option at the price.
Click to expand...
Click to collapse
How does it fit in a case , like does the edges get pushed and raised by a case ?
aa14 said:
How does it fit in a case , like does the edges get pushed and raised by a case ?
Click to expand...
Click to collapse
I'm using the ringke slim case so no it wasn't pushing the glass but I can imagine any other case would.
Ordered this off eBay and its great. Covers the whole glass on the phone and does NOT have the halo effect around the glass but only near the home button which isn't much. The borders are black to possibly hide the halo, and or parts of the glass that isn't touching the screen itself. Pictures were taken on a Nexus 5 so you know where I'm getting at.
http://www.ebay.com/itm/23154906205...49&var=530790694087&ssPageName=STRK:MEBIDX:IT
Here are the pictures. I'll post the eBay link in just a bit.
Is that the Araree brand one?
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
droidhd said:
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
Click to expand...
Click to collapse
Just added the link. This one doesn't seem to have a brand but they may all come from the same factory with different branding.
hii .. how does the phone fit in a case ? does the edges of the screen protector get pushed by the case ?
Is that really full cover? edge cover?
It does cover edges but i would like to see one on gold s6. Also to OP, how is around home button now?
The glass covers the entire front of the phone. The camera, proximity sensor and wraps around the home button. I haven't tested it with other cases besides the ringke slim case and it is just fine. I'm guessing it should be fine with others as well. There is no portion of the front glass exposed with this on except for this home button and the ear speaker.
Sent from my SM-G920T using Tapatalk
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
corb06 said:
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
Click to expand...
Click to collapse
Yes, all the way to the edge. It has a black border around the edges so if there is any halo effect, you cannot see it. I've tested it with both the Ringke Fusion and Slim case and it's not pushing the screen protector up. I imagine some cases may lift the protector.
Thanks, just ordered one.
Nillkin has an even cooler tempered glass protector, look here:
Definitely going to check this out in black
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=1&cid=1&scid=33&id=5045&page=1
http://www.nillkin.com/uploads//2015040719354873499.jpg
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Great just what i was looking for!
Thanks for sharing OP
asdfvtn said:
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Click to expand...
Click to collapse
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Blooody marvellous!!
Cameron_S said:
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Click to expand...
Click to collapse
My guess as well. It does wrap all around the phone and the glass is edge to edge unlike others. It may lift with other protectors who have a lip around the screen. Its a great protector and wanted to share with everyone here since we are all looking for one that covers the whole front glass and this is it.
Sent from my SM-G920T using Tapatalk
So I bought this skin + screen protector:
https://www.amazon.com/gp/product/B074TZ2Y5M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I already installed the back and sides, it fits quite good, there is no cut out for the mic but it seems to work fine. The 360 camera works fine. I will install the screen protector tonight so the adhesive works overnight. Will post pics tomorrow but so for the skin is great if you want to order one.
I tried both Skinomi and PhantomSkinz. Skinomi has slightly orange peel effect while PS is smoother and better, but I guess the price reflects the difference...
Sent from my PH-1 using Tapatalk
aries.sc said:
I tried both Skinomi and PhantomSkinz. Skinomi has slightly orange peel effect while PS is smoother and better, but I guess the price reflects the difference...
Click to expand...
Click to collapse
Haven't notice that effect yet, this is my first skin ever on any of my phone so really can't compare but I think this one is fine for 15 bucks.
Here are some pictures, sorry for the bad quality, I used my work phone LG X Cam
TheDethEgineer said:
Haven't notice that effect yet, this is my first skin ever on any of my phone so really can't compare but I think this one is fine for 15 bucks.
Here are some pictures, sorry for the bad quality, I used my work phone LG X Cam
Click to expand...
Click to collapse
I did take the photo for my Skinomi before I peeled it off, you can see the difference between Skinomi and PhantomSkinz. PS isn't perfect either but better than Skinomi IMO. However PS full body skin is $10 more than Skinomi...
I tried to install the back protector with the side and top pieces that food over but they would not stick to the titanium side pieces. Same with the clear strips
Sent from my PH-1 using XDA-Developers Legacy app
aries.sc said:
I did take the photo for my Skinomi before I peeled it off, you can see the difference between Skinomi and PhantomSkinz. PS isn't perfect either but better than Skinomi IMO. However PS full body skin is $10 more than Skinomi...
Click to expand...
Click to collapse
That looks nice. I like that there is no cut for the camera, full screen protection. Going to order one, thanks!
bill3508 said:
I tried to install the back protector with the side and top pieces that food over but they would not stick to the titanium side pieces. Same with the clear strips
Click to expand...
Click to collapse
Really? Back and every side worked fine here
Does the skinomi screen protector work well with cases? i got the screen protector but wondering which case i can put on without lifting the sides of the screen protector.
tanwg said:
Does the skinomi screen protector work well with cases? i got the screen protector but wondering which case i can put on without lifting the sides of the screen protector.
Click to expand...
Click to collapse
It doesnt
I ordered the Skinomi. I figure I'll trim the sides a little to keep it from peeling.
I might just go without a screen protector when my case comes..
How does this screen protector affect touch sensitivity? Every glass one I've tried had magnified the touch issues on this phone by 100x.
Jaxidian said:
How does this screen protector affect touch sensitivity? Every glass one I've tried had magnified the touch issues on this phone by 100x.
Click to expand...
Click to collapse
This is not glass, the plastic is thick but 0 touch issuess for me
Which one do you recommend for the S10e? Right now I'm still using the default protector which was applied by Samsung, but I don't really like it.
i ordered one on ebay but i have a feeling it's flat not edge to edge full cover for 10e. They use generic photoshopped stock photo for all 3 models and claim it's curved. I think 10e has 2.5D edge. Not completely flat. I'm also using the garbage thin film they included. For $800 scumsung could include high quality glass and case. I also ordered glass for rear cameras. Never seen or used one before. Not sure what to expect.
tried ESR tempered glass and MP mall tempered glass from amazon
both do not stick on side, ESR is off by like 0.75 mm because of 2.5D curve of glass, it does not stick on side. so dont waste your money on these two, i am still looking for one may be just a bit smaller than ESR.
temporarily ordering a film protector till i find a tempered glass which fits right.
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
how is touch sensitivity and does is create rainbow effect like some tempered glass with adhesive on side do?
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
No rainbow effect and if you increase touch sensitivity in the settings it works great. I have no real complaints.
which non-glass protector do you guys recommend?
destz0r said:
which non-glass protector do you guys recommend?
Click to expand...
Click to collapse
I am interested as well, tried both ESR screen protectors and they were both too small for the screen. doesn't look like there is a clear favorite right now
DSX2 said:
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
Click to expand...
Click to collapse
That's only for bigger models. S10E finger scanner is on the side.
Sent from my SM-G970U1 using Tapatalk
Why is there a lip or Ridge around perimeter of screen of galaxy s10e
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
willdogg78 said:
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
Click to expand...
Click to collapse
Yes, that's exactly what you are seeing. The S10e does indeed have a factory installed plastic screen protector. You can really feel it around the camera as there's a cutout for the camera. I would expect it to scratch rather quickly, plus I don't think it provides nearly as much drop protection as a tempered glass one might.
I'm following along here hoping that there does wind up being an economical tempered glass screen protector that works well and doesn't life at the edges. Seems like this will be similar to my S7, where I was never really able to find something that works and just went naked.
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
willdogg78 said:
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
Click to expand...
Click to collapse
I had the same confusion. All of the media I've seen say the pre-installed one is only on the S10 and S10+, but if you look around the camera on the S10e, there's clearly a cutout that confirms there is a pre-installed screen protector on there. I'm still not exactly sure how to get it off. I picked around the edges a bit and nothing is coming up easily.
I'm not sure how well the edges of a tempered glass one will stick even if you took off the pre-installed one. I haven't seen any reports of an economical one that works yet. I think I'm going to be in the same boat as I am with my S7 and be forced to go without one.
Follow
DarkMage619 said:
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
If anyone looking for decent glass. This brand is good to go, but expensive. Might wait out a little.
Sent from my SM-G970U1 using Tapatalk
my factory installed screen protector is starting to show some scratches and wear. Getting near desperate trying to find a good affordable screen protector for the s10e
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
1
Tapatalkkal küldve az én SM-G970F eszközömről
freddie813 said:
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
Click to expand...
Click to collapse
I got one. First time doing an install of this type and given the barebones installation tools provided, it was above average difficultly. First one ended up with bubbles.