my phone info
hboot 1.18.0000
radio 10.14.9035.01_M
image 1.45.401.2
its not getting even stock rom with same image version
ruu says
trying to reboot in bootloader .............
but no luck
ever tried with htcdev bootunlock method to S-Off
gots this
fastboot oem get_identifier_token
C:\sdk>fastboot oem get_identifier_token
Program too big to fit in memory
Try to go fast-boot and run ruu should work.
If not take out the battery and hold volume down and swith on,run recovery or fast-boot and then run ruu.
yes i have done that too
in fastboot ruu runs and read info of my set (which show that its conected with pc)
but when ruu tried to reboot in bootloader
it takes almost 30 minutes then error comes of usb conectivity
problem is that bootloader are locked
it shows when pluged in fastboot mode
"Locked"
It will do, that's completely normal
i think still a driver problem with your laptop.
download the official one from HTC, just following the installation and STOP the installation when it wants you in install HTC SYNC!!
EddyOS said:
It will do, that's completely normal
Click to expand...
Click to collapse
what will do what ???
i could'nt get that
Rawahi said:
i think still a driver problem with your laptop.
download the official one from HTC, just following the installation and STOP the installation when it wants you in install HTC SYNC!!
Click to expand...
Click to collapse
tried on three different systems with three differernt os and checked all drivers
it does'nt make sense that its a conectivity problem
cuz ruu shows all info of my set. so its conected in fastboot with pc
guys i need to run ruu to go back s on but when i run the ruu after everything going ok it says rebooting bootloader which doesnt than gives me error 155 when i try to do bootloader it doesnt c gives error 170 im supercid on 1.17 fw
Reboot to manually to fastboot (guides are on XDA everywhere) - then run the RUU
Error 170 happens when the RUU can not recognize your phone. Do you have the recommended drivers installed (e.g. from HTC Sync)?
Easier to boot into fastboot, connect the phone to the PC and then try and run it - should then work fine (so long as you have the drivers installed)
done it thanks install htc sync done it thanks
Today I Unlocked my Sensation with Hboot 1.18 via Revolutionary and flashed recovery...
Then I copied ARHD Firmware PGIMG32.zip latest package to SD card and Started Update... But it did some process , rebooted ones and entered bootloader agaon and gave CID error.. Then I read that I had to do SuperCID first...
Now I dont know what my CID is that I can put in firmware txt file...... Fastboot commands are not working... When I enter fastboot, Mobile is not being recognized but when I go into Recovery and Enter command adb devices, it shows the device serial number means connected but doesnt connect via fastboot...
I can go into recovery and flash ROM but when I flash Stock Old 2.3.5 GB ROM by EddyOS, it enters bootloop...
How should I resolve this Bootloop....
Somebody Help... its not my Sensation, I was doing this for someone else and he is gonna kill me...
jjdoctor said:
Today I Unlocked my Sensation with Hboot 1.18 via Revolutionary and flashed recovery...
Then I copied ARHD Firmware PGIMG32.zip latest package to SD card and Started Update... But it did some process , rebooted ones and entered bootloader agaon and gave CID error.. Then I read that I had to do SuperCID first...
Now I dont know what my CID is that I can put in firmware txt file...... Fastboot commands are not working... When I enter fastboot, Mobile is not being recognized but when I go into Recovery and Enter command adb devices, it shows the device serial number means connected but doesnt connect via fastboot...
I can go into recovery and flash ROM but when I flash Stock Old 2.3.5 GB ROM by EddyOS, it enters bootloop...
How should I resolve this Bootloop....
Somebody Help... its not my Sensation, I was doing this for someone else and he is gonna kill me...
Click to expand...
Click to collapse
Hi,
Would it be an idea to flash 1.17 firmware HERE
Then,flash a GB ROM.
Then,go into the ROM .
To find your original cid:
Type
Code:
getprop ro.cid
in a terminal on your phone .
Then,use,Kohr-Ah's thread to update the firmware.
Then install ICS ROM.
Thanks mate for ur help... Prob solved...
I have, in the past had fastboot working on my Desire S in Windows 7 so perhaps this is a Windows 8.1 driver compatibility issue?
Firstly, I tried to downgrade from a very slow Jelly Bean to the Ice Cream Sandwich RUU, but the device got stuck in a bootloop showing the HTC logo and the RUU USB connection times out. So I figured that I might need to re-lock my device for the RUU to work. So I tried, but fastboot devices, and fastboot oem lock dont work. Windows 8.1 says Device unrecognized and I have tried reinstalling different versions of the drivers.
adb devices works when the phone is in Jelly Bean. It's just fastboot that doesn't work.
Please help?
i have the same problem,only i have ice cream sandwich perfecto linaro edition,and my phone is not recognised on 5 different pc,and 3 macs.
fastboot does not work,neither adb debugging.
i don-t have a notification when i plug in the cable,and also i can-t use mass storage.i tried flashing a new kernel,but it wont-t flash.
recovery works,i can flash other roms,but i get a boot loop and cannot start the phone.
any help would be greatly appreciated.
thanks.
htc desire s
try this
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
i will try this tonight.
i copied PG88IMG.ZIP to sd card,and i booted in bootloader,and it finds the file,it says loading then just parsing for 1 sec and nothing happens.
will post results tomorrow.
saga pvt ship s-on rl
hboot 2.02.0002
radio 3831.19.00.110
eMMC-boot
unfortunately it didn't work.
the driver provided didn't detect my phone.
if i format the sd card will it work?
is there any method to relock the bootloader from hboot or fastboot?i can enter recovery but every time i flash a new rom,i get a bootloop .
alllexander said:
i will try this tonight.
i copied PG88IMG.ZIP to sd card,and i booted in bootloader,and it finds the file,it says loading then just parsing for 1 sec and nothing happens.
will post results tomorrow.
saga pvt ship s-on rl
hboot 2.02.0002
radio 3831.19.00.110
eMMC-boot
Click to expand...
Click to collapse
Sorry for the newbish question, but have you both tried using different cables? I had this problem once, and it was the cable that was faulty. Charged fine, sdcard mounted fine - but neither adb nor fastboot worked.
allexander: I dont think PG88img.zip will run with s-on unless its an official, signed update thing. I think thats correct, anyway.
hello.
the pg88img.zip file is in fact the rom.zip renamed after a stock RUU installation.
I tried usint 3 different cables for the phone.
i can however connect through wifi adb.
can i do something to flash a different boot.img and then flash a ROM i know it works with usb connection and adb debugging?
alllexander said:
hello.
the pg88img.zip file is in fact the rom.zip renamed after a stock RUU installation.
I tried usint 3 different cables for the phone.
i can however connect through wifi adb.
can i do something to flash a different boot.img and then flash a ROM i know it works with usb connection and adb debugging?
Click to expand...
Click to collapse
Hmm interesting problem. Generally when the hboot says 'parsing PG88img.zip' but then that flashes for a second and goes away again, its because its trying to find a valid PG88IMG.zip but cant find one it thinks is valid enough to use. So I still think this relates to you being S-ON. For example maybe the hboot file is too old for your current version, in which case there may be fixes available using misc_version hack. That's just my instinct though. My radio has always been s-off via a cheap hardware clip, but I still struggled at first to flash PG88IMG.zip because I didnt understand the file format.
There is alot you could do if you could get PG88IMG.zip working.
Regarding your strange bootloop: are you certainly using 4EXTRecovery to wipe all partitions except the SD card before flashing a new rom?
nothing worked for me in windows 8.1 , cannot recognise the device in fastboot. only recognised in adb.
so just installed windows 7 in another partition. then fastboot recognised the phone. and i could flash the 4ext recovery. :good:
I am using twrp 2.4 and i can't flash another recovery.every time i try,it says recovery flashed then i get the same recovery when i reboot
rimpy said:
I have, in the past had fastboot working on my Desire S in Windows 7 so perhaps this is a Windows 8.1 driver compatibility issue?
Firstly, I tried to downgrade from a very slow Jelly Bean to the Ice Cream Sandwich RUU, but the device got stuck in a bootloop showing the HTC logo and the RUU USB connection times out. So I figured that I might need to re-lock my device for the RUU to work. So I tried, but fastboot devices, and fastboot oem lock dont work. Windows 8.1 says Device unrecognized and I have tried reinstalling different versions of the drivers.
adb devices works when the phone is in Jelly Bean. It's just fastboot that doesn't work.
Please help?
Click to expand...
Click to collapse
Hi your biggest issue is with windows 8 and Fastboot. They don't play nice. You will need a windows 7 PC to proceed. Once you have that. Reunlock your bootloader and flash a stock ROM from the dev section.
alllexander said:
i have the same problem,only i have ice cream sandwich perfecto linaro edition,and my phone is not recognised on 5 different pc,and 3 macs.
fastboot does not work,neither adb debugging.
i don-t have a notification when i plug in the cable,and also i can-t use mass storage.i tried flashing a new kernel,but it wont-t flash.
recovery works,i can flash other roms,but i get a boot loop and cannot start the phone.
any help would be greatly appreciated.
thanks.
htc desire s
Click to expand...
Click to collapse
It sounds like your micro USB port may be damaged. Is it loose feeling at all?
radical.entropy said:
Hmm interesting problem. Generally when the hboot says 'parsing PG88img.zip' but then that flashes for a second and goes away again, its because its trying to find a valid PG88IMG.zip but cant find one it thinks is valid enough to use. So I still think this relates to you being S-ON. For example maybe the hboot file is too old for your current version, in which case there may be fixes available using misc_version hack. That's just my instinct though. My radio has always been s-off via a cheap hardware clip, but I still struggled at first to flash PG88IMG.zip because I didnt understand the file format.
There is alot you could do if you could get PG88IMG.zip working.
Regarding your strange bootloop: are you certainly using 4EXTRecovery to wipe all partitions except the SD card before flashing a new rom?
Click to expand...
Click to collapse
You are correct good sir, s-on is the issue here. If the IMG.zip passed to the hboot is a lower version that the img installed to the device the hboot will skip it anyway. A misc hboot downgrade would work but you would need a unlocked hboot+ working recovery and to make a gold card to bypass the cid check of the ruu.
Its not that hard to do once you have done it before, but it can be daunting at first
Sent from my HTC Desire S using Tapatalk
i flashed just now flinny cm,and i got passed the htc logo,and the boot animation started but it was in a very low resolution and not centered on the screen.
i get to the point where my charging led is on,then nothing.it remains the same,through the boot process.
i am usint twrp 2.4 and i cannot flash another recovery ,not via terminal or apps in the phone.i will try to flash in recovery.can i do that?
ContactFront said:
try this
HTCDriver3.0.0.007.exe
Click to expand...
Click to collapse
Tried this and it didn't work.
DroidArmy said:
nothing worked for me in windows 8.1 , cannot recognise the device in fastboot. only recognised in adb.
so just installed windows 7 in another partition. then fastboot recognised the phone. and i could flash the 4ext recovery. :good:
Click to expand...
Click to collapse
Sounds like I need to do this. It worked for me last time I checked in Windows 7.
heavy_metal_man said:
Hi your biggest issue is with windows 8 and Fastboot. They don't play nice. You will need a windows 7 PC to proceed. Once you have that. Reunlock your bootloader and flash a stock ROM from the dev section.
Click to expand...
Click to collapse
Makes sense. I'm surprised there isn't a fix for it in Windows 8. My phone is already unlocked and I am wanting to install the RUU. Are you suggesting that I can't downgrade with RUU and need to install a stock ROM instead?
rimpy said:
Makes sense. I'm surprised there isn't a fix for it in Windows 8. My phone is already unlocked and I am wanting to install the RUU. Are you suggesting that I can't downgrade with RUU and need to install a stock ROM instead?
Click to expand...
Click to collapse
correct. while you could do it, its alot of hassle you would need to edit your misc partition so it states that your mainversion is lower than it really is. then the ruu is considered an "upgrade" and gets flashed. you would also need to make a goldcard using your sdcard and the goldcard tool in order to bypass the hboots cid check on your ruu. then it would run.
but much easier to flash a rooted stock rom go for one of these
alllexander said:
i have the same problem,only i have ice cream sandwich perfecto linaro edition,and my phone is not recognised on 5 different pc,and 3 macs.
fastboot does not work,neither adb debugging.
i don-t have a notification when i plug in the cable,and also i can-t use mass storage.i tried flashing a new kernel,but it wont-t flash.
recovery works,i can flash other roms,but i get a boot loop and cannot start the phone.
any help would be greatly appreciated.
thanks.
htc desire s
Click to expand...
Click to collapse
It is the incompatible of the driver with either Windows 8 & 8.1. I have to PCs, one with Windows 7 and the other with Windows 8.1; under either bootloader or recovery mode plugged in works with Win 7. On the other hand on win 8.1, recovery mode plugged in works fine but bootloader mode win 8.1 does not recognize the phone. I have tested them with the same phone and the same rom C11 by Devin Kin. No matter which HTC drivers installed, I got the same result.
i have now windows 7 64 bit,and it doesn't recognise my phone.
if i install usb mass storage app on the phone,if i connect the usb cable the phone notifies me about mass storage toggle,but not the usual from the ROM,the one from the app.
if i enable the usb mass storage the device isn't recognised,if i disable it it is also not recognised.
i can connect through adb wifi,i will post the logcat here,maybe someone can help.
also,can i use a command in adb shell to relock the bootloader?
if i can do that i cand try to flash PG88IMG through hboot .
i noticed i can push files through adb,can i flash boot.img from a different rom then flash the rom vie recovery immediately after?like fastboot flash after flashing a rom in recovery.
hello all.
i found the problem
it was the umt connector on the phone.
alllexander said:
hello all.
i found the problem
it was the umt connector on the phone.
Click to expand...
Click to collapse
Please tell us how to solve the problem.