guys i need to run ruu to go back s on but when i run the ruu after everything going ok it says rebooting bootloader which doesnt than gives me error 155 when i try to do bootloader it doesnt c gives error 170 im supercid on 1.17 fw
Reboot to manually to fastboot (guides are on XDA everywhere) - then run the RUU
Error 170 happens when the RUU can not recognize your phone. Do you have the recommended drivers installed (e.g. from HTC Sync)?
Easier to boot into fastboot, connect the phone to the PC and then try and run it - should then work fine (so long as you have the drivers installed)
done it thanks install htc sync done it thanks
Related
tried to go back to stock rom. have a mac. used terminal command write secure flag 3 and s-on now. tried to ruu tmous .27 .29 and now downloading .45. phone boots to bootloader and hboot but no recovery. ive tried everything any help would be greatly appreciated.
tried adb devices comes up blank in win7 even after drivers install and recognize phone. downloaded htc sync does not recognize phone. fast boot mac recognizes my serial but thats about it and reboots it too.
If you are seeing security warning look here:
http://forum.xda-developers.com/showpost.php?p=19103555&postcount=9
got it working guess it was the newest tmobile ruu that i needed thanks.
Hi, I'm getting the same error, however extracting the ROM doesn't work, any ideas? When it gets to checking the image I get a "Hboot version is older" error has anyone got any ideas on how to fix this? I can't get into Clockwork Mod Recovery or the normal HTC recovery it seems.
HBoot 1.23
S-ON
Superuser permissions
my phone info
hboot 1.18.0000
radio 10.14.9035.01_M
image 1.45.401.2
its not getting even stock rom with same image version
ruu says
trying to reboot in bootloader .............
but no luck
ever tried with htcdev bootunlock method to S-Off
gots this
fastboot oem get_identifier_token
C:\sdk>fastboot oem get_identifier_token
Program too big to fit in memory
Try to go fast-boot and run ruu should work.
If not take out the battery and hold volume down and swith on,run recovery or fast-boot and then run ruu.
yes i have done that too
in fastboot ruu runs and read info of my set (which show that its conected with pc)
but when ruu tried to reboot in bootloader
it takes almost 30 minutes then error comes of usb conectivity
problem is that bootloader are locked
it shows when pluged in fastboot mode
"Locked"
It will do, that's completely normal
i think still a driver problem with your laptop.
download the official one from HTC, just following the installation and STOP the installation when it wants you in install HTC SYNC!!
EddyOS said:
It will do, that's completely normal
Click to expand...
Click to collapse
what will do what ???
i could'nt get that
Rawahi said:
i think still a driver problem with your laptop.
download the official one from HTC, just following the installation and STOP the installation when it wants you in install HTC SYNC!!
Click to expand...
Click to collapse
tried on three different systems with three differernt os and checked all drivers
it does'nt make sense that its a conectivity problem
cuz ruu shows all info of my set. so its conected in fastboot with pc
I'm searching for the original RUU for my branded HTC One S 1.53.169.3 with CID VODAP120. I semi-bricked it while trying to flash the vanilla modaco rom. I had a nandroid backup of my stock rom and reverted to stock. when the restore process was done i got a bootloop and couldn't mount /sdcard/ from cwm anymore. so i restored stock recovery over fastboot and relocked the bootloader and tryed to restore my device with the 1.53.401.2 unbranded RUU by editing the android_info.txt and adding my cid in the rom.zip but i am still getting error 132 (signature error) because there still isn't a possibility to s-off the one s. My only hope is to find the original branded One S RUU 1.53.169.3. I would be pleased if someone could upload the RUU. Thanks
its not possible to mount the sdcard in cwm. boot your phone in to recovery and
adb push yourrom.zip /sdcard
Try this rom: http://files.virtuousrom.com/ville/roms/Virtuous_Ville_v.1.4.0_PROPER.zip
maybe this will fix your bootloop. if not try this:
Start the RUU
- in windows type %TEMP%
- search for rom.zip
- extract it
- cmd to this folder
- fastboot flash boot boot_signed.img
restart your phone. Maybe this helps!
i'm always getting device not found in adb shell. the boot_signed.img is already on the device. still stuck in boot
install the usb driver from android sdk
my htc drivers are installed and i've tried now a coupe of times to install the android usb drivers and i am always getting drivers not match message
also having red triangle in recovery. should i try to unlock bootloader and install cwm recovery and try adb again?
Hi
I update my phone to ICS by RUU and I couldn't open it. The boot animation is stuck in the green HTC logo. "Quietly brilliant" doesn't even come on.
So i tried to flash the RUU again but it said Error 155. So i tried to superwipe. But when I go into the bootloader and into Recovery, the screen just flashed and went black. And showed the phone icon with a red cross. Seems like I can't get into recovery to install zip from card.
My bootloader says -
UNLOCKED
PYRAMID PVT SHIP S-0N RL
HBOOT - 1.27.0000
eMMC - BOOT
Jan 13 2012, 17:33:34
Please help me.
Since you are using RUU I wonder it will been fine even you are on custom ROM.
I guest maybe you are using wrong version of RUU make sure you are using the right ROM.
If would you like to try you may would like to revert back the Recovery if your are using custom recovery with this guide [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.
zarhayda said:
Hi
I update my phone to ICS by RUU and I couldn't open it. The boot animation is stuck in the green HTC logo. "Quietly brilliant" doesn't even come on.
So i tried to flash the RUU again but it said Error 155. So i tried to superwipe. But when I go into the bootloader and into Recovery, the screen just flashed and went black. And showed the phone icon with a red cross. Seems like I can't get into recovery to install zip from card.
My bootloader says -
UNLOCKED
PYRAMID PVT SHIP S-0N RL
HBOOT - 1.27.0000
eMMC - BOOT
Jan 13 2012, 17:33:34
Please help me.
Click to expand...
Click to collapse
the error you have represents connection issues
you need to run the RUU from fastboot mode in device (your device should read "fastboot usb")
Also you got stuck after running RUU ?? weird ...did the RUU ran first time completely ?
Also for safe RUN ...relock the boot loader and run the RUU...by keeping the phone in fastboot mode (device reads "fastboot usb")
Ok. So I relock my bootloader and I tried to install it. It said Error 140 - Bootloader version error. It's in fastboot USB mode. The installer get up to the Updating signature stage but then it gave error. I have SUPERcid. help?
zarhayda said:
Ok. So I relock my bootloader and I tried to install it. It said Error 140 - Bootloader version error. It's in fastboot USB mode. The installer get up to the Updating signature stage but then it gave error. I have SUPERcid. help?
Click to expand...
Click to collapse
as you are S-ON currently ..you cant run RUU having lower bootloader versions....(thats why you are getting bootloader errors)
right now you can only run ICS RUU's...
as you are superCID you can get any ICS RUU..
to RUN the RUU
1.make sure your bootloader is locked/relocked
2.keep the device in fastboot usb (i.e. connect it to pc when in fastboot )
3.run the RUU from PC
(only if RUU runs completely and gives you congats message --then only RUU is successful)
if you got any errors even after doing this...please post the error in this thread
ganeshp said:
as you are S-ON currently ..you cant run RUU having lower bootloader versions....(thats why you are getting bootloader errors)
right now you can only run ICS RUU's...
as you are superCID you can get any ICS RUU..
to RUN the RUU
1.make sure your bootloader is locked/relocked
2.keep the device in fastboot usb (i.e. connect it to pc when in fastboot )
3.run the RUU from PC
(only if RUU runs completely and gives you congats message --then only RUU is successful)
if you got any errors even after doing this...please post the error in this thread
Click to expand...
Click to collapse
Hi there.
I have the exact same problem as the original poster! (Coincidentally the same info in the bootloader too!) I'm trying run a RUU which I downloaded and have had an
'ERROR [155]: UNKNOWN ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM Update Utility and try again.
The error may be because my bootloader is unlocked? But when I try to re-lock it it shows the "security warning" below "re-locked"
and then the RUU gives me ERROR [140]: BOOTLOADER VERSION ERROR
The RUU I'm trying to use is called RUU_Pyramid_hTC_Asia_WWE_1.35.707.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198358_signed
Please help! I've been trying to Install MIUI all day and it is turning into a nightmare.. I don't want to lose this phone D:
Shunun said:
Hi there.
I have the exact same problem as the original poster! (Coincidentally the same info in the bootloader too!) I'm trying run a RUU which I downloaded and have had an
'ERROR [155]: UNKNOWN ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM Update Utility and try again.
The error may be because my bootloader is unlocked? But when I try to re-lock it it shows the "security warning" below "re-locked"
and then the RUU gives me ERROR [140]: BOOTLOADER VERSION ERROR
The RUU I'm trying to use is called RUU_Pyramid_hTC_Asia_WWE_1.35.707.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198358_signed
Please help! I've been trying to Install MIUI all day and it is turning into a nightmare.. I don't want to lose this phone D:
Click to expand...
Click to collapse
I just got my phone back. Flash clockwordmod or 4ext from adb. And then use it to wipe everything in your phone. And then flash a ROM.zip and it will work like charm
zarhayda said:
I just got my phone back. Flash clockwordmod or 4ext from adb. And then use it to wipe everything in your phone. And then flash a ROM.zip and it will work like charm
Click to expand...
Click to collapse
Do i need to rename into PG58IMG.zip ? thnx for your help.
I cannot get any reception after I installed hboot 7.00.1002 and radio 3831.19.00.110. I tried with multiple roms such as cyanogenmod 11 and HTC_EUROPE_2.10.401.9_PREROOTED_DEODEXED.
I am trying to go back to stock by flashing a RUU file by following the guide at http://forum.xda-developers.com/showthread.php?t=1460713. However, the guide requires me to have fastboot working.
I got adb to work using using universal naked driver 0.72, but once I reboot my phone into fastboot mode windows stops recognising my phone (I get a code 10 error).
How do I get fastboot to work? Also will flashing the RUU at http://forum.xda-developers.com/showthread.php?t=1722571 solve my problem, or do I need to find a RUU that is specific to my region?