After updating the hboot to version 1.23.0000 successfully, I installed Insert coin ROM first time and successfully booted. And then I tried ARHD 6.0.2 by ext4 recovery, I'm not sure what button I clicked when I was asked 'is this Sensation 4G?', and then reboot.
It stopped at hboot and cannot use the recovery and the only available is fastboot. I tried to flash the recovery via fastboot but failed. I tried to update the hboot to 3.12 again using PG58IMG and every update just show 'Fail-pu' and nothing happens.
Somebody help!!!
Didn't we lose fast boot commands with the new firmwares? If so, that's why you couldn't use fast boot to push the firmware. Take out the sd card, connect it somehow to your computer and load the firmware on it that way. Then put it back in your phone and boot into the bootloader.
Or run RUU and start fresh.
Sent from my HTC Sensation 4G using XDA App
mrg02d said:
Didn't we lose fast boot commands with the new firmwares? If so, that's why you couldn't use fast boot to push the firmware. Take out the sd card, connect it somehow to your computer and load the firmware on it that way. Then put it back in your phone and boot into the bootloader.
Click to expand...
Click to collapse
The only fastboot command available is that the basic information such as getvar mid, getvar cid, etc. It reply 'failed' not only to the recovery but also ROMs.
try downloading 3.24rev from this thread:
http://forum.xda-developers.com/showthread.php?t=1459767
fla**** in hboot, after that ull have fastboot commands available so youll be able to flash a recovery
hi all xda community !
So here is the situation :
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
Symptom:
I'm Stuck in a bootloop after i flash the 3.24 firmware and the Elegancia ROM.
First Time the roms boot normaly, then i reboot with the USB Cable attach.
And here come the BootLoop
Try to go to recovery, but bootLoop too.........
So I can go in Hboot, i can do FASTBOOT command and that all.
I try to flash CWM from fastboot -- > Ok for flash but wont go in recovery..
Try to flash 1.17 firmware then flash ROM.zip from 1.35Ruu Europe release --> Bootloop
Try to Flash 3.24 Ruu Same BOOTLOOP..
So what can I do community ?
What Solution i have ?
Why i cant flash a recovery since i Have S-OFF ??
MAYBE :
- Maybe i flash a Ruu who was Corrupt
- Maybe the radio don't match the Ruu i Tried to flash
- Maybe i'm just a simple mind guy
It seems that the 3.24 Firmware from SebastianFM with hBoot unlock have some problem, cause it seems that i'm not the only one who got several problem after flash this Firmware.
toowave said:
hi all xda community !
So here is the situation :
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
Symptom:
I'm Stuck in a bootloop after i flash the 3.24 firmware and the Elegancia ROM.
First Time the roms boot normaly, then i reboot with the USB Cable attach.
And here come the BootLoop
Try to go to recovery, but bootLoop too.........
So I can go in Hboot, i can do FASTBOOT command and that all.
I try to flash CWM from fastboot -- > Ok for flash but wont go in recovery..
Try to flash 1.17 firmware then flash ROM.zip from 1.35Ruu Europe release --> Bootloop
Try to Flash 3.24 Ruu Same BOOTLOOP..
So what can I do community ?
What Solution i have ?
Why i cant flash a recovery since i Have S-OFF ??
MAYBE :
- Maybe i flash a Ruu who was Corrupt
- Maybe the radio don't match the Ruu i Tried to flash
- Maybe i'm just a simple mind guy
It seems that the 3.24 Firmware from SebastianFM with hBoot unlock have some problem, cause it seems that i'm not the only one who got several problem after flash this Firmware.
Click to expand...
Click to collapse
Follow this thread .
http://forum.xda-developers.com/showthread.php?t=1480061
I doubt you may have to look the highlighted red text.
hi & thks
I already read this thread, problem is that i can't flash anything except Ruu Roms with fastboot or maybe i can but i don't know how to do ..
i already try to flash recovery (CWM) but bootloop when i want to go to recovery
if you now how i can have a recovery to work, or maybe if i can wipe everything with fastboot i would appreciate
toowave said:
hi & thks
I already read this thread, problem is that i can't flash anything except Ruu Roms with fastboot or maybe i can but i don't know how to do ..
i already try to flash recovery (CWM) but bootloop when i want to go to recovery
if you now how i can have a recovery to work, or maybe if i can wipe everything with fastboot i would appreciate
Click to expand...
Click to collapse
I got you. Actually you do not have any custom recovery installed. Actually if you flash any RUU it will wipe your recovery partition and install stock recovery. So first you flash a custom recovery. I know you tried to flash CWM.But you got bootloop. Did you delete the file PG58IMG.zip from sdcard after flashing CWM ???? Please redo the following steps.
STEPS TO FOLLOW:
1. Download recovery v5.0.0.8 for the Sensation here .
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone.
4. Remove the battery.
5. Wait a minute.
6. Put the battery again.
7. Press Power + Volume Down key together.
8. The phone will boot into bootloader.
9. Press Volume up to Accept when it asks" Do you want to start the update"
10. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
11. It may not boot . Do not worry because you may have wiped out evrything.
12. Power off your phone.
13. Delete PG58IMG from your memory card .
14. Download your favorite custom ICS ROM.
15. Put it on the root of your SDCARD.
16. Remove the battery.
17. Wait a minute.
18. Put the battery again.
19. Press Power + Volume Down key together.
20. The phone will boot into bootloader.
21. Select "Recovery" by pressing Volume Down Key.
22. Press Power button after selecting Recovery.
23. Your phone will reboot into clockworkmod recovery.
24. Wipe system, boot, cache, data , and dalvik cache
24. Install your ROM from SDCARD.
25. Wait at least 7 to 10 minutes for first boot
26. Your phone will be normal now.
NOTE:
******* You must be SuperCID to do the above. Please also note , from your preveous post, I understand that you have V3.24 Firmware. Remember only ICS rom will work with this firmware. So do not flash Gingerbread ROM.**********
hi help is appreciate,
`So i tried to follow your step 3 times . One with 1.17 Firmware 3.12 & 3.24.
every time after flashing the recovery, i reboot and when i go to recovery the phone go into boot loop.
toowave said:
hi help is appreciate,
`So i tried to follow your step 3 times . One with 1.17 Firmware 3.12 & 3.24.
every time after flashing the recovery, i reboot and when i go to recovery the phone go into boot loop.
Click to expand...
Click to collapse
Which ROM you want to flash ??
Why did you try all three firmware ???? You should choose your firmware according to your ROM you want to flash.
You may get boot loop after flashing recovery as there might be no rom installed.
So as I said after flashing recovery you should power off your device. Then boot into bootloader by the preveous method. ( Step 3 to 7 ).Selct recovery by volume down key. Then press power button. You will be in recovery. And flash your ROM. But your ROM should match with the firmware.
Ok but How could i flash a ROm if i can't go to recovery ...
Ok maybe you miss understand, i got boot loop when i want to go to recovery too
Please tell me what ROM you want to flash. Post the link here. And once again you give the details of your boot loader screen. Do you have fastboot/adb set up on your PC?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Android Revolution : http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
Seem to be a good Base.
I can Do fast boot command, but no adb .
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
toowave said:
Android Revolution : http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
Seem to be a good Base.
Click to expand...
Click to collapse
Ok you want arhd 6.2.1 . Tell me your cid. And where is the details of your current boot loader screen?
You did not tell me whether you have adb/fastboot set up..
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Ok i edit my previous response, with the informations you want.
And i'm super CID.
other Things, the phone won't want to charge cause he repeatedly try to boot.
toowave said:
Ok i edit my previous response, with the informations you want.
And i'm super CID.
other Things, the phone won't want to charge cause he repeatedly try to boot.
Click to expand...
Click to collapse
So, Let fix the recovery first.
Download this attatched recovery (4Ext Touch).
MD5 Checksum : d31d7df8d275f7234416af6a2e8b1c73
Check the md5check sum after download. If it matches , go to the next step else redownload.
Put the downloaded recovery.img in the directory of your fastboot binary.
Connect your phone with pc via usb cable.
Reboot your phone into bootloader.
Open fastboot command from your pc.
Now type the following command in fastboot.
" fastboot flash recovery recovery.img "
After flashing type " fastboot reboot"
Now try to go to recovery. If it is successfull then I will tell you the ROM flashing part.
Please come on gtalk . My gtalk id is musarraf172
ok i'm on gtalk wait for ya
so i'm still in the BOotLoop mode.
i've tried almost everything who was in the forum.
i'm aware of the noob style problem(Firmware not updated, still got PM58IMG.zip in SDcard, wrong Rom--firmware etc ..) and i'm not in this case !!!!
I think the device is brick but maybe someone with good knowledge, and experience can help me.
For now i got the last Hboot, i can flash recovery from fastboot , the command return OK but recovery wont boot.
Ruu flashing run nice with no problem but don't Boot (.exe and PM58IMG.zip).
when i try to unlock bootloader (who is already mark S-OFF but just for try)
with the HTCDEV method i'm stuck on the Unlock bootloader screen and i can't click YES.
it seems that my data partition have disappear ...
I here if you need more information.
Maybe someone can tell me if it's possible to FullWipe from fastboot ?
toowave said:
so i'm still in the BOotLoop mode.
i've tried almost everything who was in the forum.
i'm aware of the noob style problem(Firmware not updated, still got PM58IMG.zip in SDcard, wrong Rom--firmware etc ..) and i'm not in this case !!!!
I think the device is brick but maybe someone with good knowledge, and experience can help me.
For now i got the last Hboot, i can flash recovery from fastboot , the command return OK but recovery wont boot.
Ruu flashing run nice with no problem but don't Boot (.exe and PM58IMG.zip).
when i try to unlock bootloader (who is already mark S-OFF but just for try)
with the HTCDEV method i'm stuck on the Unlock bootloader screen and i can't click YES.
it seems that my data partition have disappear ...
I here if you need more information.
Maybe someone can tell me if it's possible to FullWipe from fastboot ?
Click to expand...
Click to collapse
if yo can go in fastboot your likley not bricked.
you can always flash the original or similar ruu (not a rom) you phone came with in fastboot.
so you will go to stock with your hboot and recovery and to see if it boots.
then do the whole process over. s-off, then root.
then check your mid and cid if its supported.
and only then update to ics.
btw whats the type of phone? branded or og htc
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
toowave said:
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
Click to expand...
Click to collapse
Come on g talk
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
toowave said:
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
Click to expand...
Click to collapse
yes the rom the phone came with or close to it (any with recent ota`s).
always flash the ruu.exe because it wil recover the hboot, radio and recovery to stock. (zipfiles can be easily corrupted)
so go in fastboot usb (via power and volume button) and run the ruu.exe
then s-off/root the device
when s-off you should be able to install recovery within the original rom like cwr or ext4 updater tool, backup, then check your mid and cid, get a correct zipfile for the ics firmware update, flash arhd (it includes the lastest ext4 recovery). then change roms if you like.
you then also can check if the phone is working correctly.
if you already changed to supercid, i think its oke.
if not, on the forum there is al list of cid`s from different countrys and brands.
also there is al list of originals ruu the devices came with.
i assume you have done custom roms before ics came out?
so the cupercid was applied correctly?
i never supercid my devices (on a personal note)
and always flashed the testroms (to get the latest firmware) with no probs.
but if your branded its mandatory.
i've already flash 3 Ruu from this thread : http://forum.xda-developers.com/showthread.php?t=1074559
and all finish in a bootloop with no stock recovery... almost all Ruu run fine with no alert
ruu i flashed already :
RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.
RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.25.401.101_Radio_11.68.3504.00U_11.21.3
Oh god... i knew i shouldve read on more but i decided to just "get lucky".
OK so A while ago i was Using Virtuous Inquisition 3.0.0 which had in the thread a PG58IMG.zip file and i placed that on my SD card and updated it via the phone itself with fastboot or whatever (pressing VOl - and Power). That ran smooth and all that. Im guessing that VI 3.0.0 ran on sense 3.5 and it was 3.24 Firmware ( i still dont know how i can check my firmware, i just know that the rom ran on that firmware and if i was using it i mustve been on Firmware 3.24).
Now i wanted to try out HyperNonSense ICS BUT i needed to upgrade to 3.30...
I didnt know how to go about that because i never had a guide in the first place when i updated to 3.24 (from whatever gingerbread ran which i never found out) and i just kind of flashed the PG58IMG file and everything worked perfectly. Now i went to the User friendly Firmware http://forum.xda-developers.com/showthread.php?t=1459767 (User-friendly... not noob friendly because i didnt know how to do **** there) and i downloaded an app on my phone called CID finder. Which didnt really give me any number on the top and said T-Mob010. I assumed from that list i had to download the PG58IMG that was under TMOB because T-Mob010 displayed on my phone was listed there.
Downloaded that file, flashed it, then flashed hypernonesense and its stuck in a boot loop. actually any rom is stuck in a boot loop. Is there any way to recover from this? HTC pops up, then the loading screen pops up for about 0.5 of a second and reboots back to HTC
Great. Cant even mount USB storage from CWM.
Put the PG581MG.zip that worked before back on your SD card and go through hboot again and it should redo the firmware. If you can't mount SD through your usb you might have to use a USB card reader to put the PG581MG.zip back on your SD card.
Sent from my ADR6300 using xda premium
Oh god it worked. How do i check my CID and MID so i can make sure of what i download now and that it works for my phone? i keep writing
fastboot getvar cid
fastboot getvar mid
on cmd (on my computer) and nothing works. not recognized as a command.
Razpr said:
Oh god it worked. How do i check my CID and MID so i can make sure of what i download now and that it works for my phone? i keep writing
fastboot getvar cid
fastboot getvar mid
on cmd (on my computer) and nothing works. not recognized as a command.
Click to expand...
Click to collapse
Hi,
Have you got ADB correctly installed?
Check HERE
Razpr said:
Oh god it worked. How do i check my CID and MID so i can make sure of what i download now and that it works for my phone? i keep writing
fastboot getvar cid
fastboot getvar mid
on cmd (on my computer) and nothing works. not recognized as a command.
Click to expand...
Click to collapse
Have you flashed fw with unlocked hboot? If not - you cannot use fastboot commands anymore
To find your original CID enter getprop ro.cid into terminal emulator on your device.
Have you got superCID?
Sent from my Pyramid-T
i know this sounds dumb but i think your sd card needs to be partitioned. if your not worried about losing data just partition it in CWM recovery it should then mount and i THINK boot
i need help my htc desire s got stock on bootlogo after attempting to update. due to power interuption i was not able to finish my update.. i run ruu stock to recover my phone but suddenly after rebooting bootloader my phone freeze.. i also run htc unlock bootloader but i got also an error.. any helps pls.. tnx.. godbless
locklim13 said:
i need help my htc desire s got stock on bootlogo after attempting to update. due to power interuption i was not able to finish my update.. i run ruu stock to recover my phone but suddenly after rebooting bootloader my phone freeze.. i also run htc unlock bootloader but i got also an error.. any helps pls.. tnx.. godbless
Click to expand...
Click to collapse
Check this thread
http://forum.xda-developers.com/showthread.php?t=1150917
and this:
http://forum.xda-developers.com/showthread.php?t=1284196
and this:
http://forum.xda-developers.com/showthread.php?t=1756287
if your problem is nothing of the sort ( above mentioned )
try to extract the rom zip from the RUU,
-rename it to PG88IMG
-place it on your sdcard ( but do not place it in ny folder )
-reboot to bootloader, let it check for an update
and hopefuly install that...
there is also a fastboot command- in case of some trouble with bootloader checking
fastboot oem reboot ruu
Edit: many usefull links:
http://forum.xda-developers.com/showthread.php?t=1146601
htc desire s bricked
thanks for the reply sir...
i cannot run command for adb shell to check if my eMMC chip is not corrupted because my phone cant detect with my computer i already installed the drivers for my phone. The only thing that i can used command are for fastboot command
i tried to run stock ruu for my phone, then i copied the temp folder rom zip file then rename it as PG88IMG and place it on my sdcard, then reboot to bootloader, theres a pop message to confirm if ill update the phone i select the ok to update then suddenly showed bootloader updating and it tooks
around 1hour for updating but nottings happen it freezes..... thanks...
Hey, i had rooted, s-off, unlocked device..
i wanted to go back to stock, i changed CID , MID,locked bootloader and phone is now S-ON...
By mistake i flashed stock recovery before i flashed the stock rom..
now my bot only gets into bootloader, i dont have "factory reset"/"wipe" or any other option.. not even in download mode.
When i try to get in recovery it says : "Failed to boot to recovery mode".
When plugging the phone to my PC, it charges, yet the computer wont recognize the device, meaning i cant use adb commands..
Please help!!
Amir0s said:
Hey, i had rooted, s-off, unlocked device..
i wanted to go back to stock, i changed CID , MID,locked bootloader and phone is now S-ON...
By mistake i flashed stock recovery before i flashed the stock rom..
now my bot only gets into bootloader, i dont have "factory reset"/"wipe" or any other option.. not even in download mode.
When i try to get in recovery it says : "Failed to boot to recovery mode".
When plugging the phone to my PC, it charges, yet the computer wont recognize the device, meaning i cant use adb commands..
Please help!!
Click to expand...
Click to collapse
Bump up..
i tried installing RUU Via exe files, only 1 time it managed to detect my phone, and too bad for me i had the wrong ruu.
Now when i try using the correct ruu, the exe file cant detect my phone.. ideas ??
SOLVED!!!!
Amir0s said:
Bump up..
i tried installing RUU Via exe files, only 1 time it managed to detect my phone, and too bad for me i had the wrong ruu.
Now when i try using the correct ruu, the exe file cant detect my phone.. ideas ??
Click to expand...
Click to collapse
After 1 sleepless night and alot of hours i finally got it working!!
Here is how i did it:
1. Uninstall HTC Sync
2. Unlock Bootloader using the htcdev.com Method..
yyyyaaaaaaaaaaayyyyyyyyyy
Thanks
Thread closed.